Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particulate Contamination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

LDEF contaminants analysis data

Modification of surface texture for Ram Facing FEP Teflon on the Long Duration Exposure Facility (LDEF) satellite is documented. Photos of changes in surface texture if thermal blanket material with position on tray C-08 are presented. Infrared spectra and photographic documentation of molecular film deposits on LDEF surfaces by location is reported. Results of a survey of the functional groups and elemental composition of the brown film found widely distributed on the surface of LDEF is shown. A partial photographic catalog of LDEF particulate contaminants is included. A set of photos of particles collected or photographed in place on the surface of LDEF is shown. Particle counts and surface obscuration data for the LDEF satellite are reported. The surface data in tables and charts is presented for the LDEF satellite by location.

Crutcher, E. Russ↗
NASA NTRS1983

OSS-1/STS-3 Shuttle induced atmosphere experiment

Direct light form the Sun and the sunlit Earth, and indirect light from these same sources reflected off parts of the orbiter and its payload were the two major sources of light seen in the bay during spacecraft day. Brightness arising from sunlight reflected off particulates originating from the spacecraft (corona or induced atmosphere) were tentatively identified. Sources of light observed during spacecraft night include large scale diffuse glows associated with Vernier thruster firings, surface glows on the orbiter in the direction of orbiter n motion, and periodic sky brightness structures observed primarily at 4200 A and 6300 A. Some information was obtained on the size and trajectories of individual contaminant particulates. Astronomical data were obtained from large regions of the Milky Way and zodiacal light, including large regions to within 35 deg of the Sun and possibly closer. Coordinated and sometimes simultaneous observations were successfully made from Hawaii and from STS-3 to provide unique information on atmospheric sources and sinks of radiation.

Weinberg, J. L.↗
NASA NTRS1972

Design principles for contamination abatement in scientific satellites.

It is shown that deposition of contamination films on satellite optics can be controlled by the following means: isolating critical optical surfaces from the rest of the spacecraft; avoiding or minimizing the use of nonmetallic material, particularly near or in line of sight of optical surfaces; avoiding materials with high vapor pressures; subjecting materials to vacuum baking prior to use, to drive off the volatile outgassing products; keeping the critical surfaces at temperatures above the ambient; avoiding elevated operational temperatures for nonmetallic materials; paying special attention to optics exposed to intense UV-, X-ray, or particular radiation; avoiding water-vapor sources; and directing RCS plumes away from critical surfaces. Methods of controlling particulate contaminants are also proposed.

Naumann, R. J.↗
NASA NTRS1993

Contamination on LDEF: Sources, distribution, and history

An introduction to contamination effects observed on the Long Duration Exposure Facility (LDEF) is presented. The activities reported are part of Boeing's obligation to the LDEF Materials Special Investigation Group. The contamination films and particles had minimal influence on the thermal performance of the LDEF. Some specific areas did have large changes in optical properties. Films also interfered with recession rate determination by reacting with the oxygen or physically shielding underlying material. Generally, contaminant films lessen the measured recession rate relative to 'clean' surfaces. On orbit generation of particles may be an issue for sensitive optics. Deposition on lenses may lead to artifacts on photographic images or cause sensors to respond inappropriately. Particles in the line of sight of sensors can cause stray light to be scattered into sensors. Particles also represent a hazard for mechanisms in that they can physically block and/or increase friction or wear on moving surfaces. LDEF carried a rather complex mixture of samples and support hardware into orbit. The experiments were assembled under a variety of conditions and time constraints and stored for up to five years before launch. The structure itself was so large that it could not be baked after the interior was painted with chemglaze Z-306 polyurethane based black paint. Any analysis of the effects of molecular and particulate contamination must account for a complex array of sources, wide variation in processes over time, and extreme variation in environment from ground to launch to flight. Surface conditions at certain locations on LDEF were established by outgassing of molecular species from particular materials onto adjacent surfaces, followed by alteration of those species due to exposure to atomic oxygen and/or solar radiation.

Pippin, Gary↗
NASA NTRS1975

Coronagraph particulate measurements. Skylab flight experiment T025

Major results of the Skylab T025 Coronagraph experiment designed to monitor the particulate contamination about the spacecraft and to study the earth's atmospheric aerosol distribution are presented. A model for comet outbursts based on the properties of amorphous ice and ground based narrow-band and white light photography of comet Kohoutek ten days to perihelion are included. The effect of atmospheric refraction on the analysis of the T025 atmospheric data was also investigated.

Greenberg, J. M.↗
NASA NTRS1976

Introducing controlled matter into a fluid system

Device consisting of capsule holder and glass inner tube has been developed to handle controlled particulate-contamination samples. Premeasured quantity of particles can be injected into closed fluid system without contamination.

Hoffman, C. E.↗
NASA NTRS1976

Automated solvent concentrator

Designed for automated drug identification system (AUDRI), device increases concentration by 100. Sample is first filtered, removing particulate contaminants and reducing water content of sample. Sample is extracted from filtered residue by specific solvent. Concentrator provides input material to analysis subsystem.

Griffith, J. S.↗
NASA NTRS1977

A study of Minnesota land and water resources using remote sensing

The author has identified the following significant results. Both LANDSAT imagery and digital data were studied for usefulness in surveying water conditions of Minnesota lakes. Initial consideration was given to analysis of LANDSAT image densities because of the low technologic and cost requirements. The techniques employed, however, yield inconsistent and unreliable results. A set of criteria are given for using LANDSAT data in identification of three categories of particulate contaminants in Lake Superior. A linear transformation giving the relationship between the residual LANDSAT intensities and concentrations of three contaminants was obtained from correlation of remote sensing data with insitu measurements. LANDSAT imagery was found useful in placing peat bogs and fens in their respective geologic settings. Artificial disturbances and drainageways in peatlands could be recognized and classified.

Shepherd, W. G.↗
NASA NTRS1979

Building penetration analysis

The airborne exposure to carbon fibers experienced within a building may be substantially less than that outside the building. By their very nature, buildings provide a barrier to the free flow of airborne particulate contaminants through the air space they occupy. The objective of this report is an evaluation of the degree to which buildings and other structures will attenuate potential exposures to carbon fibers. Most if not all types of buildings, and all phenomena which may influence the extent to which fibers in outdoor air can penetrate structures are addressed.

Source record↗
NASA NTRS1980

Photovoltaic module soiling studies, May 1978 - October 1980

Comparative electrical and optical performance data from photovoltaic modules and materials subjected to outdoor exposure at field test sites throughout the United States were collected and examined. The results show significant time and site dependence. During periods when natural removal processes do not dominate, the rate of particulate contamination accumulation appears to be largely material-independent. The effectiveness of natural removal processes, especially rain, is strongly material-dependent. Glass and acrylic top cover materials retain fewer particles than silicone rubber does. Side by side outdoor exposure testing for long duration is presently the most effective means of evaluating soiling differences between materials. Changes in spectral transmission as a function of time and location and limited scattering data are presented.

Hoffman, A. R.↗
NASA NTRS1984

APART/PADE analytical evaluation of the diffuse infrared background experiment for NASA's cosmic background explorer

The stray light performance of NASA's Diffuse Infrared Background Experiment (DIRBE) has been calculated using the APART/PADE code. That code has been upgraded to handle off-axis optical systems such as DIRBE. Under observing conditions, sunlight is attenuated by 21 to 29 orders-of-magnitude; uniform diffuse illumination, by 6 to 9 orders of magnitude. The sunlight is attenuated by multiple diffraction at an external sun shield and by a forebaffle at the entrance to the DIRBE. Stray light is nearly a linear function of the Bidirectional Reflectance Distribution Function (BRDF) of the primary mirror at all wavelengths - or it can be made to be so by reducing the size of the field defining stop from 0.866 to 0.7 degrees square. For uniform diffuse illumination, half of the stray radiation comes from within 5 degrees of the center of the field-of-view. Particulate contamination of the primary mirror is expected to be a problem and special polishing and cleaning procedures are recommended - before mirror overcoating and again before flight.

Evans, D. C.↗
NASA NTRS1988

The induced environment around Space Station

The potential impact of the International Space Station on its immediate environment is discussed, summarizing the results of recent investigations by NASA working groups. Consideration is given to the neutral-gas environment, induced photon emission, particulate contamination, the ionized environment, the Induced-environment Monitoring Package proposed for inclusion in the Space Station equipment, and recommendations for further research. Diagrams, drawings, graphs, and tables of numerical data are provided.

Torr, Marsha R.↗
NASA NTRS1991

Pressure Roller For Tape-Lift Tests

Rolling device applies nearly constant, uniform pressure to surface. Simple tool exerts nearly constant pressure via compression of sheath by fixed amount. Pins hold wheels on cylinder and cylinder on tangs of handle. Cylinder and handle made of metal or plastic. Sheath press-fit or glued to cylinder. End pins attached to cylinder by adhesive or screw threads. Device intended for use in taking tape-lift samples of particulate contamination on surface.

Abrams, Eve↗
NASA NTRS1991

Isotopic analyses of amino acids from the Murchison meteorite

An account is given of the results of H-2, C-13 isotopic analyses of the Murchison meteorite incorporating an ultrafiltration step to exclude the possibility of fine particulate contaminants. The meteorite's amino acids were chromatographically separated in order to preclude isotopic enrichment by basic compounds other than the amino acids. The results indicate that the Murchison amino acids are isotopically highly unusual; delta-C-13 is elevated by about 40 percent, and delta-D by fully 2500 percent. This high D content of the meteorite's alpha-amino acids may be due to the synthesis of their molecular precursors by low-temperature ion-molecule reactions in an interstellar cloud.

Pizzarello, S.↗
NASA NTRS1992

Particle types and sources associated with LDEF

The particulate contamination history of the Long Duration Exposure Facility (LDEF) can be resolved by careful analysis of particle types, the LDEF time line, evidence of the relationship between particles and the surface of the LDEF, and a consideration of probable sources. This work is far from complete but was initiated as part of the characterization of the condition of experimental trays that were returned to principle investigators for their analysis. The work presented in this photo-essay is continuing and will be updated in subsequent reports to NASA and at future technical meetings.

Crutcher, E. R.↗
NASA NTRS1992

Silver Teflon blanket: LDEF tray C-08

A study of the Teflon blanket surface at the edge of tray C-08 illustrates the complexity of the microenvironments on the Long Duration Exposure Facility (LDEF). The distribution of particulate contaminants varied dramatically over a distance of half a centimeter (quarter of an inch) near the edge of the blanket. The geometry and optical effects of the atomic oxygen erosion varied significantly over the few centimeters where the blanket folded over the edge of the tray resulting in a variety of orientations to the atomic oxygen flux. A very complex region of combined mechanical and atomic oxygen damage occurred where the blanket contacted the edge of the tray. A brown film deposit apparently fixed by ultraviolet light traveling by reflection through the Teflon film was conspicuous beyond the tray contract zone. Chemical and structural analysis of the surface of the brown film and beyond toward the protected edge of the blanket indicated some penetration of energetic atomic oxygen at least five millimeters past the blanket-tray contact interface.

Crutcher, E. Russ↗