Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phononic materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Unconventional interlayer exchange coupling via chiral phonons in synthetic magnetic oxide heterostructures

Chiral symmetry breaking of phonons plays an essential role in emergent quantum phenomena owing to its strong coupling to spin degree of freedom. However, direct experimental evidence of the chiral phonon–spin coupling is lacking. In this study, we report a chiral phonon–mediated interlayer exchange interaction in atomically controlled ferromagnetic metal (SrRuO 3 )-nonmagnetic insulator (SrTiO 3 ) heterostructures. Owing to the unconventional interlayer exchange interaction, we have observed rotation of spins as a function of nonmagnetic insulating spacer thickness, resulting in a spin spiral state. The chiral phonon–spin coupling is further confirmed by phonon Zeeman effect. The existence of the chiral phonons and their interplay with spins along with our atomic-scale heterostructure approach unveil the crucial roles of chiral phonons in magnetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Electron Energy-Loss Spectroscopy and Differential Phase Contrast Imaging with Active Decision in Multimodal Electron Microscopy: Isotopic detection at the atomic scale

Isotopic engineering provides a powerful route to control phonon behavior in crystalline solids, enabling fundamental studies of lattice dynamics and heat transport at the atomic scale. Here, we directly visualize isotope-dependent phonon propagation in epitaxial Cr 2 O 3 using aberration-corrected scanning transmission electron microscopy (STEM) combined with monochromated, high-energy-resolution electron energy-loss spectroscopy (EELS). Guided by ab initio phonon calculations, we demonstrate that optical phonon modes above 70 meV are predominantly oxygen-derived and exhibit measurable redshifts upon substitution of natural 16 O by enriched 18 O. Spatially resolved vibrational spectrum imaging reveals isotope-enriched tracer layers within Cr 2 O 3 thin films, correlating isotope concentration with phonon intensity variations and vibrational energy shifts. At the nanometer and atomic scales, vibrational EELS mapping uncovers coherent phonon propagation across isotopic interfaces, consistent with theoretical phonon density of states and dispersion relations. These results establish vibrational EELS as a quantitative probe for isotope-dependent phonon transport in materials, opening new possibilities for studying energy dissipation and lattice dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ultraconfined terahertz phonon polaritons in hafnium dichalcogenides

The confinement of electromagnetic radiation to subwavelength scales relies on strong light–matter interactions. In the infrared and terahertz spectral ranges, phonon polaritons are commonly employed to achieve deeply subdiffractional light confinement, with such optical modes offering much lower losses in comparison to plasmon polaritons. Among these, hyperbolic phonon polaritons in anisotropic materials offer a promising platform for light confinement. Here we report on ultraconfined phonon polaritons in hafnium-based dichalcogenides with confinement factors exceeding λ 0 /250 in the terahertz spectral range. This extreme light compression within deeply subwavelength thin films is enabled by the large magnitude of the light–matter coupling strength in these compounds and the natural hyperbolicity of HfSe 2 . Our findings emphasize the role of light–matter coupling for polariton confinement, which for phonon polaritons in polar dielectrics is dictated by the transverse–longitudinal optical phonon energy splitting. Our results demonstrate transition-metal dichalcogenides as an enabling platform for terahertz nanophotonic applications.

Kowalski, Ryan A. [Vanderbilt Univ., Nashville, TN↗
DOE OSTI2024

Magnetic, charge, and bond order in the two-dimensional Su-Schrieffer-Heeger-Holstein model

Most nonperturbative numerical studies of electron-phonon interactions focus on model Hamiltonians where the electrons interact with a phonon branch via a single type of microscopic mechanism. Two commonly explored couplings in this context are the Holstein and Su-Schrieffer-Heeger (SSH) interactions, which describe phonons modulating the on-site energy and intersite electron hopping, respectively. Many materials, however, have multiple phonon branches that can each interact with electronic degrees of freedom in different ways. We present here a determinant quantum Monte Carlo study of the half-filled two-dimensional (bond) SSH-Holstein Hamiltonian, where electrons couple to different phonon branches via either the Holstein or SSH mechanism. As a result, we map the model's phase diagram and determine the nature of the transitions between charge-density wave, bond-order wave, and antiferromagnetic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Excess heat capacity in magnetically ordered Ce heavy-fermion metals

Herein we study the magnetic heat capacity of a series of magnetically ordered Ce-based heavy-fermion materials, which show an anomalous T 3 heat capacity in excess of the phonon contribution in many materials. For compounds for which magnon models have been worked out, we show that the local-moment magnon heat capacity derived from the measured magnon spectra underestimates the experimental specific heat. The excess heat capacity reveals increasing density of states with increasing energy, akin to a pseudogap. We show that this anomalous temperature-dependent term is not associated with proximity to a quantum critical point, but is strongly correlated with T N , indicating the anomalous excitations are governed by the magnetic exchange interaction. This insight may hold key information for understanding magnetically ordered heavy fermions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Modeling phonons in nanomaterials

The vibrational properties of nanomaterials play fundamentally important roles in determining their stability and various functionalities, from rippling of otherwise flat two-dimensional (2D) monolayers to the extreme thermal transport behaviors observed in one-dimensional (1D) and 2D carbon-based systems. Here we discuss modeling efforts to understand how phonons in lower dimensional materials differ from those in bulk, and how these behaviors manifest in their unusual properties. In particular, this chapter gives a heavy focus to calculations of phonon dynamics, interactions, and lattice thermal transport in 1D chains and nanotubes, 2D monolayers, and van der Waals coupled bulk materials from first principles methods. This chapter will discuss important phonon calculation details related to nanomaterials with examples and discussions providing both historical and modern perspectives.

Lindsay, Lucas↗
DOE OSTI2024

Influence of metal organic framework glasses on thermoelectric properties of AgSb 0.96 Zn 0.04 Te 2 alloy

In recent years, a significant number of chalcogenides-based thermoelectric (TE) materials have been investigated theoretically and experimentally. However, the efficiency of TE materials is often limited by physical and chemical stability issues. Therefore, it is crucial to identify additive materials that can reduce thermal conductivity and improve the efficiency of crystalline TE materials. One well-known approach to lower thermal conductivity is introducing porosity into the material structure, which helps scatter phonon energy. Metal-organic framework (MOF) crystalline materials, known for their porosity and physical and chemical stability, offer unique advantages in TE applications. In this study, we investigate the influence of 20 weight% amorphous Zeolitic Imidazolate Framework (ZIF)-62 to p-type AgSb 0.96 Zn 0.04 Te 2 (ASTZ), a well-known TE material. We synthesized composites, ASTZ, ASTZ-Zn, and ASTZ-Co, by sintering ASTZ with amorphous ZIF-62(Zn) and ZIF-62(Co) respectively. The addition of amorphous ZIF-62(Zn) leads to a significant enhancement in the Seebeck coefficient of ASTZ increasing from 151 µV/K to 229 µV/K at 586K. Moreover, the thermal conductivity of the ASTZ TE materials drops drastically from 0.491 Wm -1 K -1 to around 0.22 Wm -1 K -1 at 623K with the addition of either amorphous ZIF-62(Zn) or ZIF-62(Co). Remarkably, ASTZ containing amorphous ZIF-62(Zn) achieves a maximum thermoelectric figure of merit (zT max ) of approximately 0.078 at 573K, surpassing any MOF-based thermoelectric material reported to date. In conclusion, these findings highlight the potential of amorphous ZIF-62 as an effective additive for enhancing the properties of thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Low-frequency Raman spectrum of 2D layered perovskites: Local atomistic motion or superlattice modes?

We report the low-frequency Raman spectrum (ω = 10 cm -1 –150 cm -1 ) of a wide variety of alkylammonium iodide based 2D lead halide perovskites (2D LHPs) as a function of A-site cation (MA = methylammonium and FA = formamidinium), octahedral layer thickness (n = 2–4), organic spacer chain length (butyl-, pentyl-, hexyl-), and sample temperature (T = 77 K–293 K). Using density functional theory calculations under the harmonic approximation for n = 2 BA:MAPbI, we assign several longitudinal/transverse optical phonon modes between 30 cm -1 and 100 cm -1 , the eigen displacements of which are analogous to that observed previously for octahedral twists/distortions in bulk MAPbI. Additionally, we propose an alternative assignment for low-frequency modes below this band (<30 cm -1 ) as zone-folded longitudinal acoustic phonons corresponding to the periodicity of the entire layered structure. Furthermore, we compare measured spectra to predictions of the Rytov elastic continuum model for zone-folded dispersion in layered structures. Our results are consistent across the various 2D LHPs studied herein, with energetic shifts of optical phonons corresponding to microscopic structural differences between materials and energetic shifts of acoustic phonons according to changes in the periodicity and elastic properties of the perovskite/organic subphases. This study highlights the importance of both the local atomic order and the superlattice structure on the vibrational properties of layered 2D materials.

2D materials↗
DOE OSTI2019

Machine learning maximized Anderson localization of phonons in aperiodic superlattices

Nanostructuring materials to achieve ultra-low lattice thermal conductivity has proven to be extremely attractive for numerous applications such as thermoelectric energy conversion. Anderson localization of phonons due to aperiodicity can reduce thermal conductivity in superlattices, but the lower limit of thermal conductivity remains elusive due to the prohibitively large design space. In this work, we demonstrate that an intuition-based manual search for aperiodic superlattice structures (random multilayers or RMLs) with the lowest thermal conductivity yields only a local minimum, while a genetic algorithm (GA) based approach can efficiently identify the globally minimum thermal conductivity by only exploring a small fraction of the design space. Our results show that this minimum value occurs at an average RML period that is, surprisingly, smaller than the period corresponding to the minimum SL thermal conductivity. Interestingly, above this critical period, scattering of incoherent phonons at interfaces is less, whereas below this period, the room for randomization becomes less, thus putting more coherent phonons out of Anderson localization and causing increased thermal conductivity. Moreover, the lower limit of the thermal conductivity occurs at a moderate rather than maximum randomness of the layer thickness. Our machine learning approach demonstrates a general process of exploring an otherwise prohibitively large design space to gain non-intuitive physical insights.

42 ENGINEERING↗
DOE OSTI2023

Nonthermal Bonding Origin of a Novel Photoexcited Lattice Instability in SnSe

Lattice dynamics measurements are often crucial tools for understanding how materials transform between different structures. Here, we report time-resolved x-ray scattering-based measurements of the nonequilibrium lattice dynamics in SnSe, a monochalcogenide reported to host a novel photoinduced lattice instability. By fitting interatomic force models to the fluence dependent excited-state dispersion, we determine the nonthermal origin of the lattice instability to be dominated by changes of interatomic interactions along a bilayer-connecting bond, rather than of an intralayer bonding network that is of primary importance to the lattice instability in thermal equilibrium.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Photochemistry sample sticks for inelastic neutron scattering

Every material experiences atomic and molecular motions that are generally termed vibrations in gases and liquids or phonons in solid state materials. Optical spectroscopy techniques, such as Raman, infrared absorption spectroscopy, or inelastic neutron scattering (INS), can be used to measure the vibrational/phonon spectrum of ground state materials properties. A variety of optical pump probe spectroscopies enable the measurement of excited states or elucidate photochemical reaction pathways and kinetics. So far, it has not been possible to study photoactive materials or processes in situ using INS due to the mismatch between neutron and photon penetration depths, differences between the flux density of photons and neutrons, cryogenic temperatures for INS measurements, vacuum conditions, and a lack of optical access to the sample space. These experimental hurdles have resulted in very limited photochemistry studies using INS. Here we report on the design of two different photochemistry sample sticks that overcome these experimental hurdles to enable in situ photochemical studies using INS, specifically at the VISION instrument at Oak Ridge National Laboratory. We demonstrate the use of these new measurement capabilities through (1) the in situ photodimerization of anthracene and (2) the in situ photopolymerization of a 405 nm photoresin using 405 nm excitation as simple test cases. Furthermore, these new measurement apparatus broaden the science enabled by INS to include photoactive materials, optically excited states, and photoinitiated reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dynamic properties of a polaron coupled to dispersive optical phonons

We study static and dynamic properties of an electron coupled to dispersive quantum optical phonons in the framework of the Holstein model defined on a one-dimensional lattice. Calculations are performed using the Lanczos algorithm based on a highly efficient construction of the variational Hilbert space. Even small phonon dispersion has a profound effect on the low-energy optical response. While the upward phonon dispersion broadens the optical spectra due to single-phonon excitations, the downward dispersion has the opposite effect. With increasing dispersion, a multiphonon excitation (MPE) state becomes the lowest excited state of the system at zero momentum and determines the low-frequency response of the optical conductivity where the threshold for optical absorption moves below the single-phonon frequency. Multiphonon states form a well-defined bandlike feature just above the polaron band as clearly seen in the electron spectral function. Low-energy MPEs should be observable in systems with strong optical phonon dispersion in optical as well as angle-resolved photoemission experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Screening of Polar Electron-Phonon Interactions near the Surface of the Rashba Semiconductor BiTeCl

Understanding electron-phonon coupling in noncentrosymmetric materials is critical for controlling the internal fields which give rise to Rashba interactions. We apply time- and angle-resolved photoemission spectroscopy (trARPES) to study coherent phonons in the surface and bulk regions of the polar semiconductor BiTeCl. Aided by \textit{ab initio} calculations, our measurements reveal the coupling of out-of-plane $A_1$ modes and an in-plane $E_2$ mode. By considering how these modes modulate the electric dipole moment in each unit cell, we show that the polar $A_1$ modes are more effectively screened in the metallic surface region, while the non-polar $E_2$ mode couples in both regions. Finally, in addition to informing strategies to optically manipulate Rashba interactions, this work has broader implications for the behavior of electron-phonon coupling in systems characterized by inhomogeneous dielectric environments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermally tunable mid-infrared nanocavity resonance of coupled surface plasmon-phonon polaritons

Phase-change materials (PCMs) are essential for achieving tunability of metasurfaces. However, they frequently face limitations in the long-wave infrared range because of their lossy behavior. Here, we experimentally demonstrate a thermally tunable mid-infrared nanocavity resonance from coupled surface plasmon-phonon polaritons that are supported within a trilayer structure of metal-PCM layer-polar dielectric (Au-VO 2 -SiC). The top metal structures configure the Fabry-Perot cavity resonance near 840 cm −1 (11.9 µm), which is sensitively tunable and reversible with small changes in the VO 2 refractive index ∆n near below its insulator-to-metal phase transition temperature where the loss is small. The maximum resonance shift of 7.7 cm −1 is induced by a small ∆n = 0.3 over a temperature change of 3°C. The tuning figure of merit is comparable to the current standard in photonic modulator applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Factors influencing quantum evaporation of helium from polar semiconductors from first principles

While there is much indirect evidence for the existence of dark matter (DM), to date it has evaded detection. Current efforts focus on DM masses over ~GeV—to push the sensitivity of DM searches to lower masses, new DM targets and detection schemes are needed. In this work, we focus on the latter—a novel detection scheme recently proposed to detect 10–100 meV phonons in polar target materials. Previous work showed that well-motivated models of DM can interact with polar semiconductors to produce an athermal population of phonons. This new sensing scheme proposes that these phonons then facilitate quantum evaporation of 3 He from a van der Waals film deposited on the target material. However, a fundamental understanding of the underlying process is still unclear, with several uncertainties related to the precise rate of evaporation and how it can be controlled. In this work, we use ab initio density functional theory calculations to compare the adsorption energies of helium atoms on a polar target material, sodium iodide, to understand the underlying evaporation physics. We explore the role of surface termination, monolayer coverage, and elemental species on the rate of He evaporation from the target material. Using this, we discuss the optimal target features for He-evaporation experiments and their range of tunability through chemical and physical modifications such as applied field and surface termination.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Advances in coherent coupling between magnons and acoustic phonons

The interaction between magnetic and acoustic excitations have recently inspired many interdisciplinary studies ranging from fundamental physics to circuit implementation. Specifically, the exploration of their coherent interconversion enabled via the magnetoelastic coupling opens a new playground combining straintronics and spintronics, and provides a unique platform for building up on-chip coherent information processing networks with miniaturized magnonic and acoustic devices. In this Perspective, we will focus on the recent progress of magnon-phonon coupled dynamic systems, including materials, circuits, imaging and new physics. In particular, we highlight the unique features such as nonreciprocal acoustic wave propagation and strong coupling between magnons and phonons in magnetic thin-film systems, which provides a unique platform for their coherent manipulation and transduction. We will also review the frontier of surface acoustic wave resonators in coherent quantum transduction and discuss how the novel acoustic circuit design can be applied in microwave spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Highly Anisotropic Quasi‐Direct Organic Metal Halide Hybrids: A Platform for Polarization‐Sensitive Optoelectronics

Low-dimensional organic–inorganic metal halide hybrids (OMHHs) exhibit remarkable optical properties and enhanced environmental stability. We investigate a 1D OMHH with formula C 4 N 2 H 14 PbBr 4 , consisting of Pb–Br chains separated by organic cations, which shows a large Stokes shift (0.83 eV) and broadband emission. Through first-principles calculations and polarized Raman spectroscopy, we characterize the material's vibrational properties and identify the specific phonon modes that drive exciton self-trapping. Our novel GW/Bethe-Salpeter equation force formalism reveals that low-frequency phonons (∼ 100 cm −1 , primarily involving Pb–Br motions) couple strongly with excitons, with a remarkably high Huang-Rhys factor of 137 ± 4, and gives a pathway for ultrafast structural analysis during the absorption process. This phonon-exciton coupling mechanism explains the material's broadband emission and provides a pathway for controlling optical properties through vibrations and for tuning vibrations through optical excitations. The material also exhibits highly anisotropic optical properties and electronic transport, with bands that are dispersive along the Pb–Br chains but nearly flat in perpendicular directions, resulting in direction-dependent electrical conductivity that is calculated to be an order of magnitude higher along the chain direction and consistent with measurements. These combined properties make this system an excellent platform for polarization-sensitive optoelectronic devices.

36 MATERIALS SCIENCE↗