Search NASA⌕ Search

SEARCH · Search NASA

Results for “Physics modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Sampling the ENSO response to tropical volcanic eruptions in the GISS-E2-1 model: physical & biogeochemical ocean effects

Despite observational evidence that an El-Niño is likely to follow tropical volcanic eruptions (Predybaylo et al, 2017), modelling studies have so far reached no consensus on either the sign or physical mechanism of El Niño response to volcanism (Khodri et al, 2017) . A previous modelling study found that following the Pinatubo eruption, the tropical Pacific developed El Niño-like conditions that triggered a decrease in the upwelling of DIC and increased carbon uptake (Eddebbar et al., 2019). However, the carbon cycle response to volcanisms as it depends on ENSO phase remains unclear. Here we perform thirty ensemble control simulations using the GISS-E2-1-G model to sample the pre-industrial control ENSO cycle and thirty more to superimpose a Pinatubo-like volcanic eruption. We find that the model tends to favor the development of a weak El-Niño following the volcanic eruption only in the case of a volcano that erupts at the start of a neutral ENSO phase. In response to the weak El-Niño, some anomalies have the same sign as those that develop from a strong El-Niño, such as weaker winds, shallower mixed layer depths, less direct but more diffuse radiation at the surface of the ocean, less nitrate, and lower primary productivity. However, other anomalies show the opposite sign as those from a strong El-Niño, such as more precipitation, less surface DIC, and less surface ocean pCO 2 . In contrast to the neutral phase, the volcanic response during positive ENSO and negative ENSO phases are swamped by the model’s internal variability.

ENSO↗
NASA NTRS1989

A physical model for predicting bidirectional reflectances over bare soil

While most previous attempts to retrieve soil surface optical property characteristics have proceeded through a fitting of empirical functions to the data, an optimization technique is presently applied to a physically-based surface reflectance model developed for the study of planetary surfaces. This inversion procedure is shown to allow the direct estimation of the single-scattering coefficient, two parameters describing the 'hot spot' phenomenon, and two parameters describing the scattering phase function. A comparison of inversion technique results with both synthetic data and actual observations shows the model to be capable of predicting the observed bidirectional reflectances as well as directional-hemispherical reflectances; it can also build the complete radiance field over the upward hemisphere.

Pinty, Bernard↗
NASA NTRS1992

Physical model and experimental results of cathode erosion related to power supply ripple

This paper discusses the physical effects of power supply ripple on cathode erosion and cathode arc attachment in a water-cooled, 30 kW nitrogen arcjet. Experimental results are presented for 2 percent thoriated tungsten, which show that the long-term cathode erosion rate is a decreasing function of current ripple over the range 1-13 percent. Above this range, the cathode discharge becomes unstable, and the erosion rate rapidly increases. A qualitative model of this effect is given in terms of a magnetically induced radial motion of the arc column, and an overall increase in the cathode spot radius due to the higher peak current associated with higher ripple. The most important effect of power supply ripple is therefore shown to be its ability to collectively drive the cathode attachment away from the cathode center. This leads to an increase in the cathode attachment area, and a subsequent decrease in the cathode erosion rate.

Harris, W. J.↗
DOE OSTI2024

Multi-physics Modeling of Radiative Heat Transfer and Fluid Flow for the Reactor Cavity Cooling System

High-temperature gas-cooled reactors (HTGRs) are notable for their high thermal efficiency and potential for combined heat and power applications. These reactors are particularly appealing due to their advanced passive safety features. HTGRs utilize passive safety systems that function without requiring active components like pumps or compressors during emergencies. These reactor designs depend on a Reactor Cavity Cooling System (RCCS) to manage decay heat removal from the reactor pressure vessel (RPV) during accident conditions. The RCCS consists of vertical rectangular channels known as "risers" or riser ducts positioned around the RPV. These risers receive heat from the RPV through both convective and radiative heat transfer mechanisms. Understanding the interplay of multiple physical phenomena, such as fluid dynamics, heat transfer, and neutron interactions, is essential for the effective design and operation of nuclear reactors, particularly for systems like the RCCS. Multi-physics simulations provide a comprehensive approach to studying these interactions, offering detailed insights and enhancing accuracy. They are especially important in RCCS designs, where the interaction between radiative and convective heat transfer can significantly impact system performance. By leveraging multi-physics simulations, complex reactor behaviors can be modeled without compromising the fidelity of the underlying physical processes. This work aims to establish a robust methodology for coupling multiple physical processes in an air-cooled RCCS. By focusing on validating this multi-physics approach, the study involves designing test cases that simulate various conditions to verify the numerical models employed. The outcomes of this research will provide critical insights for accurately modeling and optimizing complex nuclear systems like the RCCS.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

ExaWind: Exascale Predictive Wind Plant Flow Physics Modeling

The scientific goal of the ExaWind project is to advance our fundamental understanding of the flow physics governing whole wind plant performance, including wake formation, complex terrain impacts, and turbine-turbine-interaction effects. The primary application codes in the ExaWind environment are Nalu-Wind, an unstructured-grid computational fluid dynamics (CFD) code, AMR-Wind, a structured-grid CFD code, and OpenFAST, a whole-turbine simulation code. In this poster we present our progress towards simulating the ExaWind challenge problem, which is a predictive simulation of a wind farm with tens of megawatt-scale wind turbines dispersed over an area of 50 square kilometers.

49 EE - Wind and Water Power Program - Wind (EE-4W↗
DOE OSTI2024

Centrifuge Physical Modeling of Underground Chemical Explosions

This report presents development of a new meso-scale geomechanics capability using an 8.84-m radius centrifuge for physically simulating underground chemical explosions and stress cage processes in scaled models.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Two-fluid physical modeling of superconducting resonators in the ARTEMIS framework

In this work, we implement a new London equation module for superconductivity in the GPU-enabled ARTEMIS framework, and couple it to a finite-difference time-domain solver for Maxwell's equations. We apply this two-fluid approach to model a superconducting coplanar waveguide (CPW) resonator. We validate our implementation by verifying that the theoretical skin depth and reflection coefficients can be obtained for several superconductive materials, with different London penetration depths, over a range of frequencies. Our convergence studies show that the algorithm is second-order accurate in both space and time, except at superconducting interfaces where the approach is spatially first-order. In our CPW simulations, we leverage the GPU scalability of our code to compare the two-fluid model to more traditional approaches that approximate superconducting behavior and demonstrate that superconducting physics can show comparable performance to the assumption of quasi-infinite conductivity as measured by the Q-factor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Diffstar: a fully parametric physical model for galaxy assembly history

We present Diffstar, a smooth parametric model for the in situ star formation history (SFH) of galaxies. The Diffstar model is distinct from traditional SFH models because it is parametrized directly in terms of basic features of galaxy formation physics. Diffstar includes ingredients for: the halo mass assembly history; the accretion of gas into the dark matter halo; the fraction of gas that is eventually transformed into stars, ϵ ms ; the time-scale over which this transformation occurs, τ cons ; and the possibility that some galaxies will experience a quenching event at time t q , and may subsequently experience rejuvenated star formation. We show that our model is sufficiently flexible to describe the average stellar mass histories of galaxies in both the IllustrisTNG (TNG) and UniverseMachine (UM) simulations with an accuracy of ~0.1 dex across most of cosmic time. We use Diffstar to compare TNG to UM in common physical terms, finding that: (i) star formation in UM is less efficient and burstier relative to TNG; (ii) UM galaxies have longer gas consumption time-scales, relative to TNG; (iii) rejuvenated star formation is ubiquitous in UM, whereas quenched TNG galaxies rarely experience sustained rejuvenation; and (iv) in both simulations, the distributions of ϵ ms , τ cons , and t q share a common characteristic dependence upon halo mass, and present significant correlations with halo assembly history. Finally, we conclude with a discussion of how Diffstar can be used in future applications to fit the SEDs of individual observed galaxies, as well as in forward-modelling applications that populate cosmological simulations with synthetic galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Physical model and experimental validation of a high temperature proton exchange membrane electrochemical hydrogen pump cell for efficient single-stage extraction of low concentration hydrogen gas

There is interest in valorization of existing natural gas infrastructure to facilitate the co-transportation of hydrogen via blending of hydrogen gas initially at limited concentrations of 1–20 vol% H2 and to subsequently extract hydrogen at fuel cell quality standards (SAE J2719/ISO14687-2). High temperature proton exchange membrane electrochemical hydrogen pump (HT-PEM EHP) based on phosphoric acid doped polybenzimidazole (PA-PBI) exhibits good performance at elevated temperatures (>120 °C), which provides desirable tolerance to non-methane natural gas constituents that are problematic for lower temperature based EHP. To better understand the suitability of the HT-PEM EHP for such gas separation processes, a two-dimensional model of EHP based on PA-PBI was developed. The model is validated for several relevant operating conditions and across cells with differing amounts of phosphoric acid content in the electrodes. Operando micro x-ray computed tomography (CT) imaging of an HT-PEM EHP was used to further validate physical parameters and assumptions of the model. The impacts of pressure, relative humidity of the anode feed, and concentration of feed gases on separation performance are investigated. This study shows that a specific energy of separation of 5.1 kWh/kg H2 at a hydrogen recovery factor (HRF) of 50 vol% can be achieved in a single stage with the EHP, producing fuel cell quality hydrogen purity of 99.99 vol% H2 from a 2 vol% H2/CH4 feed blend, while pressurizing the product H2 at a pressure ratio of 1.3 relative to feed pressure.

Stansberry, John M↗
DOE OSTI2026

Physics model enhancements in MARLEY version 2

Large next-generation neutrino detectors, such as those designed for accelerator-based oscillation experiments, are expected to have impressive sensitivity to MeV astrophysical neutrinos generated by the Sun and by supernovae. There are also numerous related prospects to search for MeV-scale phenomena beyond the Standard Model. In contrast to detectors constructed with water and hydrocarbon targets, which will be primarily sensitive to electron antineutrinos via inverse beta decay, the upcoming Deep Underground Neutrino Experiment (DUNE) will provide unparalleled capabilities to measure low-energy electron neutrinos from cosmic sources. Interpreting such future measurements in DUNE will require a high-quality simulation of MeV interaction physics in the argon nucleus. The MARLEY (Model of Argon Reaction Low Energy Yields) neutrino event generator has been designed with the goal of delivering the needed simulation capabilities for DUNE and other argon-based neutrino detectors. In this poster, I will present recent improvements to MARLEY's suite of interaction models, which will be released for general use by the neutrino community in version 2 of the software.

Gardiner, Steven James [Fermilab] (ORCID:000000028↗
NASA NTRS1989

A physical model for earthquakes. III - Thermodynamical approach and its relation to nonclassical theories

An earthquake theory based on fundamental thermodynamical considerations was developed using two principles. The first principle is that physical systems, including fault systems, tend toward a state of minimal Helmholtz free energy, which corresponds to static equilibrium. The second postulate is that, if the system is not at minimal free energy, thermodynamic forces arise which drive the system back toward a minimum. According to this theory, the propagation of a fracture, or the formation of a slip on a frictional surface, are manifestations of the physics which attempt to return the system to minimal free energy. It is shown that the process of return to minimal free energy by the system corresponds to the production of entropy, thereby rendering the process irreversible.

Rundle, John B.↗
DOE OSTI2023

Triangular lattice Hubbard model physics at intermediate temperatures

Moiré systems offer an exciting playground to study the many-body effects of strongly correlated electrons in regimes that are not easily accessible in conventional material settings. Motivated by a recent experiment on WSe 2 /WS 2 moiré bilayers [Y. Tang et al., Nature (London) 579, 353 (2020)], which realized a triangular superlattice with a small hopping (of approximately 10 Kelvin), with tunable density of holes, we explore the Hubbard model on the triangular lattice for intermediate temperatures t ≲ T < U. Employing finite-temperature Lanczos calculations and closely following the fitting protocols used in the experiment, we recover the observed trends in the reported Curie-Weiss temperature Θ with filling, using the reported interaction strength U/t=20. Here, we focus on the large increase of |Θ| on decreasing the density below half filling and the sign change of Θ at higher fillings, which signals the onset of ferromagnetism. The increase in |Θ| is also seen in the t–J model (the low-energy limit of the Hubbard model) in the intermediate temperature range, which we clarify is opposite to the trend in its high temperature limit. Differences between the low, intermediate, and high temperature regimes are discussed. Our numerical calculations also capture the crossover between short-range antiferromagnetic to ferromagnetic order in the intermediate temperature regime, a result broadly consistent with the experimental findings. We find that this behavior is a finite-temperature remnant of the underlying zero-temperature phase transition, which we explore with ground-state density matrix renormalization group calculations. We provide evidence of ferromagnetism characterized by weak (but robust) correlations that explain the small Θ seen in the experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1988

A physical model for earthquakes. I - Fluctuations and interactions. II - Application to southern California

The idea that earthquakes represent a fluctuation about the long-term motion of plates is expressed mathematically through the fluctuation hypothesis, under which all physical quantities which pertain to the occurance of earthquakes are required to depend on the difference between the present state of slip on the fault and its long-term average. It is shown that under certain circumstances the model fault dynamics undergo a sudden transition from a spatially ordered, temporally disordered state to a spatially disordered, temporally ordered state, and that the latter stages are stable for long intervals of time. For long enough faults, the dynamics are evidently chaotic. The methods developed are then used to construct a detailed model for earthquake dynamics in southern California. The result is a set of slip-time histories for all the major faults, which are similar to data obtained by geological trenching studies. Although there is an element of periodicity to the events, the patterns shift, change and evolve with time. Time scales for pattern evolution seem to be of the order of a thousand years for average recurring intervals of about a hundred years.

Rundle, John B.↗
DOE OSTI2023

Self-supervised learning of spatiotemporal thermal signatures in additive manufacturing using reduced order physics models and transformers

Microstructure control via additive manufacturing has enormous potential as manufacturers, materials scientists, and designers alike seek to exploit novel fabrication technologies to improve component performance. Recent works have demonstrated the feasibility of producing materials with controlled microstructures across various length scales. However, the experimental approach towards exploring the process-structure space can be laborious and costly. This is particularly true if also considering scan pattern optimization which is well suited for processes such as powder bed fusion electron beam melting. In this work we propose an approach for encoding additive manufacturing layer-wise thermal response signatures using self-supervised representation learning. Thermal simulations from a reduced order model are utilized to estimate the spatiotemporal response during printing. A machine learning framework, using video-transformers, is utilized to efficiently distill spatiotemporal patterns into a compact latent space representation. This latent state representation encodes the relevant physics which is then utilized to establish a data-driven process-structure model for an additively manufactured Ni-based superalloy. In conclusion, the proposed methodology could potentially be used towards in-situ process monitoring, scan pattern experimental design, and component qualification.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1992

Asteroid 951 Gaspra - Pre-Galileo physical model

An effort is made to derive from Galileo's 1991 encounter of the S-type asteroid 951 Gaspra general lessons that will be applicable to prospective earth-based observations of other asteroids. Attention is accordingly given to the derivation of spin-vector and shape parameters en route to more detailed physical characterization of a given asteroid. A future encounter of Gaspra by Galileo will be required to verify the present model.

Magnusson, P.↗