Results for “Planetary Data System” — Page 6

NASA NTRS1998

Clementine High Resolution Camera Mosaicking Project: CL 6021; 80 deg S to 90 deg S Latitude, North Periapsis - Volume 21

This compact disk (CD) is part of the Clementine I high resolution (HiRes) camera lunar image mosaics developed by Malin Space Science Systems (MSSS). These mosaics were developed through calibration and semi-automated registration against the recently released geometrically and photometrically controlled Ultraviolet/Visible (UV/Vis) Basemap Mosaic, which is available through the PDS, as CD-ROM volumes CL_3001-3015. The HiRes mosaics are compiled from non-uniformity corrected, 750 nanometer ("D") filter high resolution observations from the HiRes imaging system onboard the Clementine Spacecraft. The geometric control is provided by the U. S. Geological Survey (USGS) Clementine Basemap Mosaic compiled from the 750 nm Ultraviolet/Visible Clementine imaging system. Calibration was achieved by removing the image nonuniformity largely caused by the HiRes system's light intensifier. Also provided are offset and scale factors, achieved by a fit of the HiRes data to the corresponding photometrically calibrated UV/Vis basemap that approximately transform the 8-bit HiRes data to photometric units. The mosaics on this CD are compiled from polar data (latitudes greater than 80 degrees), and are presented in the stereographic projection at a scale of 30 m/pixel at the pole, a resolution 5 times greater than that (150 m/pixel) of the corresponding UV/Vis polar basemap. This 5:1 scale ratio is in keeping with the sub-polar mosaic, in which the HiRes and UV/Vis mosaics had scales of 20 m/pixel and 100 m/pixel, respectively. The equal-area property of the stereographic projection made this preferable for the HiRes polar mosaic rather than the basemap's orthographic projection. Thus, a necessary first step in constructing the mosaic was the reprojection of the UV/Vis basemap to the stereographic projection. The HiRes polar data can be naturally grouped according to the orbital periapsis, which was in the south during the first half of the mapping mission and in the north during the second half. Images in each group have generally uniform intrinsic resolution, illumination, exposure and gain. Rather than mingle data from the two periapsis epochs, separate mosaics are provided for each, a total of 4 polar mosaics. The mosaics are divided into 100 square tiles of 2250 pixels (approximately 2.2 deg near the pole) on a side. Not all squares of this grid contain HiRes mosaic data, some inevitably since a square is not a perfect representation of a (latitude) circle, others due to the lack of HiRes data. This CD also contains ancillary data files that support the HiRes mosaic. These files include browse images with UV/Vis context stored in a Joint Photographic Experts Group (JPEG) format, index files ('imgindx.tab' and 'srcindx.tab') that tabulate the contents of the CD, and documentation files. For more information on the contents and organization of the CD volume set refer to the "FILES, DIRECTORIES AND DISK CONTENTS" section of this document. The image files are organized according to NASA's Planetary Data System (PDS) standards. An image file (tile) is organized as a PDS labeled file containing an "image object".

Malin, Michael↗

NASA NTRS1998

Clementine High Resolution Camera Mosaicking Project: CL 6019; 80 deg N to 90 deg N Latitude, North Periapsis - Volume 19

This compact disk (CD) is part of the Clementine I high resolution (HiRes) camera lunar image mosaics developed by Malin Space Science Systems (MSSS). These mosaics were developed through calibration and semi-automated registration against the recently released geometrically and photometrically controlled Ultraviolet/Visible (UV/Vis) Basemap Mosaic, which is available through the PDS, as CD-ROM volumes CL_3001-3015. The HiRes mosaics are compiled from non-uniformity corrected, 750 nanometer ("D") filter high resolution observations from the HiRes imaging system onboard the Clementine Spacecraft. The geometric control is provided by the U. S. Geological Survey (USGS) Clementine Basemap Mosaic compiled from the 750 nm Ultraviolet/Visible Clementine imaging system. Calibration was achieved by removing the image nonuniformity largely caused by the HiRes system's light intensifier. Also provided are offset and scale factors, achieved by a fit of the HiRes data to the corresponding photometrically calibrated UV/Vis basemap that approximately transform the 8-bit HiRes data to photometric units. The mosaics on this CD are compiled from polar data (latitudes greater than 80 degrees), and are presented in the stereographic projection at a scale of 30 m/pixel at the pole, a resolution 5 times greater than that (150 m/pixel) of the corresponding UV/Vis polar basemap. This 5:1 scale ratio is in keeping with the sub-polar mosaic, in which the HiRes and UV/Vis mosaics had scales of 20 m/pixel and 100 m/pixel, respectively. The equal-area property of the stereographic projection made this preferable for the HiRes polar mosaic rather than the basemap's orthographic projection. Thus, a necessary first step in constructing the mosaic was the reprojection of the UV/Vis basemap to the stereographic projection. The HiRes polar data can be naturally grouped according to the orbital periapsis, which was in the south during the first half of the mapping mission and in the north during the second half. Images in each group have generally uniform intrinsic resolution, illumination, exposure and gain. Rather than mingle data from the two periapsis epochs, separate mosaics are provided for each, a total of 4 polar mosaics. The mosaics are divided into 100 square tiles of 2250 pixels (approximately 2.2 deg near the pole) on a side. Not all squares of this grid contain HiRes mosaic data, some inevitably since a square is not a perfect representation of a (latitude) circle, others due to the lack of HiRes data. This CD also contains ancillary data files that support the HiRes mosaic. These files include browse images with UV/Vis context stored in a Joint Photographic Experts Group (JPEG) format, index files ('imgindx.tab' and 'srcindx.tab') that tabulate the contents of the CD, and documentation files. For more information on the contents and organization of the CD volume set refer to the "FILES, DIRECTORIES AND DISK CONTENTS" section of this document. The image files are organized according to NASA's Planetary Data System (PDS) standards. An image file (tile) is organized as a PDS labeled file containing an "image object".

Malin, Michael↗

NASA NTRS1984

User Requirements

The capabilities, enumerated during the Planetary Data Workshop, which the ideal Planetary Data System (PDS) should provide to its users are summarized. System design and implementation activities must take into account that all requirements do not carry the same weight. While some system requirements are essential and must be met early, other requirements are of a less immediate nature and can be implemented during later stages of development. Some requirements may be determined to be not essential to the operation of a PDS or impractical, and then not considered for implementation. It is assumed, that the PDS implementation will be modular in architecture and accomplishment. The modular plan is supported by many potential benefits in that it: simplifies the design and planning activities; improves the ability to respond to the changing demands of the user community; permits incorporation of emerging technologies; and allows the implementation to remain flexible in the face of fluctuating resources.

Source record↗

NASA NTRS1984

Planetary Data Workshop, Part 2

Technical aspects of the Planetary Data System (PDS) are addressed. Methods and tools for maintaining and accessing large, complex sets of data are discussed. The specific software and applications needed for processing imaging and non-imaging science data are reviewed. The need for specific software that provides users with information on the location and geometry of scientific observations is discussed. Computer networks and user interface to the PDS are covered along with Computer hardware available to this data system.

Source record↗

NASA NTRS1984

Database Management

Management of the data within a planetary data system (PDS) is addressed. Principles of modern data management are described and several large NASA scientific data base systems are examined. Data management in PDS is outlined and the major data management issues are introduced.

Source record↗

NASA NTRS1984

SOFT-1: Imaging Processing Software

Five levels of image processing software are enumerated and discussed: (1) logging and formatting; (2) radiometric correction; (3) correction for geometric camera distortion; (4) geometric/navigational corrections; and (5) general software tools. Specific concerns about access to and analysis of digital imaging data within the Planetary Data System are listed.

Source record↗

NASA NTRS1984

Networking

Data exchange and communication between users, between nodes, and between users and nodes within the Planetary Data System are discussed. Data transport costs, methods, and protocol are reviewed.

Source record↗

NASA NTRS1993

User friendly database for Neptune planetary radio astronomy observations

Planetary Radio Astronomy (PRA) data from the Voyager Neptune encounter were cleaned and reformatted in a variety of formats. Most of these formats are new and have been specifically designed to provide easy access and use of the data without the need to understand esoteric characteristics of the PRA instrument or the Voyager spacecraft. Several data sets were submitted to the Planetary Data System (PDS) and have either appeared already on peer reviewed CDROM's or are in the process of being reviewed for inclusion in forthcoming CD-ROM's. Many of the data sets are also available online electronically through computer networks; it is anticipated that as time permits, the PDS will make all the data sets that were a part of this contract available both online and on CD-ROM's.

Evans, David R.↗

NASA NTRS1992

Global views of Venus from Magellan

Magellan data for Venus reveal a planet with a great diversity of volcanic and tectonic landforms, with good evidence of continuing volcanism and tectonism. Weathering, mass wasting and wind erosion and deposition have modified the surface only to the extent of a few meters, thereby preserving an excellent record of tectonic and volcanic processes on a terrestrial-size planet. All cycle 1 mosaics, radiometry, and altimeter data will be made available through the Planetary Data System and the National Space Science Data Center.

Arvidson, R. E.↗

NASA NTRS1993

Quasi-random narrow-band model fits to near-infrared low-temperature laboratory methane spectra and derived exponential-sum absorption coefficients

Near-infrared 10/cm resolution spectra of methane obtained at various temperatures, pressures, and abundances are fit to a quasi-random narrow-band model. Exponential-sum absorption coefficients for three temperatures (112, 188, and 295 K), and 20 pressures from 0.0001 to 5.6 bars, applicable to the cold environments of the major planets, are then derived from the band model for the 230 wavelengths measured from 1.6 to 2.5 microns. RMS deviations between the laboratory and the exponential-sum synthetic transmissions are reported for the best fitting 50 wavelengths. Deviations relevant to broadband, 1-percent spectral resolution observations are also presented. The validity of exponential-sum coefficients derived from broadband (10/cm) transmission data is demonstrated via direct comparison with line-by-line calculations. The complete atlas of coefficients is available from the Planetary Data System-Planetary Atmospheres Discipline Node.

Baines, Kevin H.↗

NASA NTRS1996

Grant Proposal for the Continuation of the Voyager Interstellar Mission: LECP Investigation

This proposal documents the plans of the Low Energy Charged Particle (LECP) investigation team for participation in NASA's Voyager Interstellar Mission (VIM) as the Voyager 1 and 2 spacecraft explore the outer reaches of the heliosphere and search for the termination shock and the heliopause. The proposal covers the four year period from 1 January 1997 to 31 December 2000. The LECP instruments on Voyager 1 and 2 measure in situ intensities of charged particles with energies from about 30 keV to 100 MeV for ions, and about 20 keV to greater than 10 MeV for electrons. The instruments provide detailed spectral, angular, and compositional information about the particles. Composition is available for greater than 200 keV/nuc using multi-parameter measurements. Angular information is obtained by a mechanically scanned platform that rotates at various commanded rates. Measurements of low energy ion and electron intensities versus time and spatial location within the heliosphere contain an abundance of information regarding various transport and acceleration processes on both local (approx. 1 hr, approx. 0.01 AU) and global (approx. 11 yrs, approx. 100 AU) scales. The LECP instruments provide unique observations of such dynamical processes, and we anticipate that it will return critical information regarding the boundaries of the heliosphere. Several recent and exciting discoveries based on LECP measurements emphasize the important role that low energy charged particle distributions play in physical processes in the interplanetary medium. Yet, at the same time, these discoveries also underscore the fact that our understanding of processes in the outer heliosphere is, in most cases, incomplete, and in others, only rudimentary at best. Among the discoveries referred to above are the following: (1) Shocks: Examination of greater than 30 keV ion intensities have revealed: (a) a total absence of acceleration beyond only -100-200 keV at a strong transient shock in May 1991 at 35 AU, despite an enhanced level of seed particles; (b) a large transient shock in September 1991 of global scale, with intensities of shock-accelerated ions greater than or equal to 30 keV to approx. 30 MeV showing complex, highly energy-dependent spatial evolution, and small-scale (approx. few gyroradii), often anisotropic, micro-structures; (c) recurrent intensity increases in greater than or equal to 30 keV to -few MeV ions, with structures that, in some cases, show no correlation with the associated corotating shock. (2) Superthermal ion pressure: A global merged interaction region with a leading shock, downstream of which the superthermal ion (greater than or equal to 30 keV to approx. 4 MeV) pressure is comparable to that of the thermal plasma, and the total particle pressure yields a plasma beta of order unity. (3) Pickup ions: Measurements of the C/O ratio within transient structures at 35-45 AU showing the first clear evidence that transient shocks can pre-accelerate interstellar pickup ions from approx. 1 keV/nuc to at least 1 MeV/nuc. (4) Seed particles: Injection of ions for acceleration to high energies at the termination shock is unlikely to be a problem, since interplanetary transient and recurrent shocks are continually accelerating ions, of solar wind or interstellar origin, to highly superthermal energies. (5) Precursor electrons: Ambient solar electrons (greater than or equal to few tens of keV) that exist in the outer heliosphere ca form a broad precursor, several days wide, that is upstream of the termination shock and potentially observable a few months prior to the shock crossing. (6) Solar wind velocity at Voyager 1: We can use LECP ion data to obtain the solar wind velocity at Voyager 1, enabling us to provide critical measurement of the plasma flow as we approach and encounter the termination shock and other regions (necessary due to the partial failure of the Voyager 1 PLS experiment). The work of the LECP investigator team during the VIM will include: (1) Continuing operations with regard to the receipt, processing, verification, cataloging, display, and distribution of the data from the LECP instruments on Voyager 1 and 2, (2) Monitoring the health and performance of the LECP instruments, and evaluating and characterizing the response of the LECP instruments to various energetic particle and plasma environments, (3) Participating in, and supporting Voyager Project planning exercises and other coordinated activities relevant to exploration of the outer heliosphere, (4) Developing analysis techniques and operational procedures suitable for searching for and characterizing the boundaries and unique regions of the outher heliosphere, (5) Continuing the preparation of data sets appropriate for submission to the National Space Sciences Data Center (NSSDC) and, where appropriate, the Planetary Data System (PDS), (6) Maintaining direct Web access to online LECP data through the JHU/APL Voyager LECP home page, (7) Performing scientific evaluations of the Voyager 1 and 2 LECP data sets in conjunction with other data sets and other investigators, with particular focus on the outer regions of the heliosphere, and (8) Publishing the results of these evaluations in the scientific literature and presenting the results in scientific conferences.

Krimigis, Stamatios M.↗

NASA NTRS1999

Mars 2001 Lander Mission: Measurement Synergy Through Coordinated Operations Planning And Implementation

The 2001 Mars Surveyor Program Mission includes an orbiter with a gamma ray spectrometer and a multispectral thermal imager, and a lander with an extensive set of instrumentation, a robotic arm, and the Marie Curie Rover. The Mars 2001 Science Operations Working Group (SOWG) is a subgroup of the Project Science Group that has been formed to provide coordinated planning and implementation of scientific observations, particularly for the landed portion of the mission. The SOWG will be responsible for delivery of a science plan and, during operations, generation and delivery of conflict-free sequences. This group will also develop an archive plan that is compliant with Planetary Data System (PDS) standards, and will oversee generation, validation, and delivery of integrated archives to the PDS. In this report we cover one element of the SOWG planning activities, the development of a plan that maximizes the scientific return from lander-based observations by treating the instrument packages as an integrated payload. Scientific objectives for the lander mission have been defined. They include observations focused on determining the bedrock geology of the site through analyses of rocks and also local materials found in the soils, and the surficial geology of the site, including windblown deposits and the nature and history of formation of indurated sediments such as duricrust. Of particular interest is the identification and quantification of processes related to early warm, wet conditions and the presence of hydrologic or hydrothermal cycles. Determining the nature and origin of duricrust and associated salts is -very important in this regard. Specifically, did these deposits form in the vadose zone as pore water evaporated from soils or did they form by other processes, such as deposition of volcanic aerosols? Basic information needed to address these questions includes the morphology, topography, and geologic context of landforms and materials exposed at the site, together with quantitative information on material mineralogy, chemistry, and physical properties (rock textures; soil grain size and shape distributions; degree and nature of soil induration; soil magnetic properties). The calibration targets provide radiometric and mineralogical control surfaces. The magnets allow observations of magnetic phases. Patch plates are imaged to determine adhesive and abrasive properties of soils. Coordinated mission planning is crucial for optimizing the measurement synergy among the packages included on the lander. This planning has already begun through generation of multi-sol detailed operations activities. One focus has been to develop a scenario to use the arm to dig a soil trench to a depth of tens of centimeters. The activity will be monitored through use of Pancam and RAC to ensure nominal operations and to acquire data to determine subsurface physical properties (e.g., angle of repose of trench walls). Pancam and Mini-TES observations would also provide constraints on mineralogy and texture for the walls and bottom of the trench during excavation. If desired, soils excavated at depth could be deposited on the surface and Mossbauer and APXS measurements could be acquired for these materials. Soil samples from various depths would be delivered to MECA for characterization of aqueous geochemistry and physical properties of soil grains, particularly size, shape, and hardness. These physical properties would be determined by optical and atomic force microscopy. When completed, detailed information of soil properties as a function of depth would be obtained. These various data sets would constrain our understanding of whether or not there are systematic variations in soil characteristics as a function of depth. These variations might be related, for example, to evaporative moisture losses and formation of salt deposits, thereby indicating water transport processes occurred fairly recently. Many other value-added measurement scenarios are being developed. For example, characterizing the nature and dynamics of dust deposition will be done using MIP/DART to provide deposition rates, Pancam and RAC imaging of lander and rover surfaces to extrapolate these measurements to other areas, and a variety of measurements to determine if the bulk loose soil has the same characteristics as dust that accumulates during the mission. Bedrock geology of the site is primarily an APEX-focus setting, mineralogy, and texture, and APXS data to be we interest will be to determine the extent to which rock hydrothermal processes, given that APEX is the precursor 4 and 2005 rover missions. Additional information is contained in the original.

Arvidson, R.↗

NASA NTRS1997

Lunar and Planetary Science XXVIII

The present conference discusses such topics as density crossovers in lunar picrites, the geology of the Cassini impact basin, Mars, nanobacteria in carbonates, the properties of shocked aerogels, a chemical model of Comet Halley, lunar mascons, the impact evolution of icy regoliths, the geology of the Venera 8 landing site, the photogeologic mapping of northern Venus, HST observations of Mars, observational constraints on the rotational dynamics of Mars, and primordial magnetic field measurements from the moon. Also discussed are models of the S2 fluorescence spectra of comets, Martian crater ejecta, the heights of Venusian steep-sided domes, cloud-climate interactions on Venus, the Humorum basin geology from Clementine data, an early Amazonian lake in the Gale crater of Mars, nebular fractionations and Mn-Cr systematics, the Rock Chipper planetary surface sample collection, Mariner 10 stereo images of Mercury, remote and local stresses and Calderas on Mars, the electrostatic charging of saltating particles, SO2 detected on Callisto, the Mars Explorer Planetary Data System, an assessment of explosive venting on Europa, the sequential faulting history of the Mars Valles Marineris, a search for Martian sediments, the composition and internal structure of Europa, long-term and 'diurnal' tidal stresses on Europa, and episodic greenhouse climates on Mars.

Source record↗

NASA NTRS2001

Status of Mars Global Surveyor Science Data Archives

The Mars Global Surveyor has been in orbit around Mars since September 1997, completing its primary mission on January 31, 2001. As of that date the spacecraft had completed more than 8000 mapping orbits. Data from its science instruments, radio science experiment, and SPICE files have been released regularly to the NASA Planetary Data System (PDS) as described in the MGS Archive Plan and Addendum and are available online. Additional information is contained in the original extended abstract.

Slavney, S.↗

NASA NTRS2002

Description of Data Archiving Activities

Data restoration and archiving activities for this project have resulted in the restoration of 100% of the original Mariner 9 raw data set as well as many of the secondary analysis data sets. These data sets have been submitted to the Planetary Data System (PDS) Atmospheric Node, long with their PDS labels and descriptive metadata.

Simmons, K. E.↗

NASA NTRS2002

Description of Data Archiving Associated With the NASA Goddard Grant NAGS-9590

Data restoration and archiving activities for this project have resulted in the restoration of 100% of the original Mariner 9 raw data set as well as many of the secondary analysis data sets. These data sets have been submitted to the Planetary Data System (PDS) Atmospheric Node, along with their PDS labels and descriptive metadata. In addition, a useful visualization and analysis tool has also been developed which allows the user to compare these Mariner 1971 Ultraviolet spectral data with several choices of related data sets: Mariner 9 images, USGS geologic data, MGS MOLA topography, Viking images (Viking MDIM) and thermal inertia data (MGS TES).

Simmons, K. E.↗

NASA NTRS2002

Building a Virtual Solar Observatory: I Look Around and There's a Petabyte Following Me

The 2001 July NASA Senior Review of Sun-Earth Connections missions and data centers directed the Solar Data Analysis Center (SDAC) to proceed in studying and implementing a Virtual Solar Observatory (VSO) to ease the identification of and access to distributed archives of solar data. Any such design (cf. the National Virtual Observatory and NASA's Planetary Data System) consists of three elements: the distributed archives, a "broker" facility that translates metadata from all partner archives into a single standard for searches, and a user interface to allow searching, browsing, and download of data. Three groups are now engaged in a six-month study that will produce a candidate design and implementation roadmap for the VSO. We hope to proceed with the construction of a prototype VSO in US fiscal year 2003, with fuller deployment dependent on community reaction to and use of the capability. We therefore invite as broad as possible public comment and involvement, and invite interested parties to a "birds of a feather" session at this meeting. VSO is partnered with the European Grid of Solar Observations (EGSO), and if successful, we hope to be able to offer the VSO as the basis for the solar component of a Living With a Star data system.

Gurman, J. B.↗

NASA NTRS2002

Characterizing the Oxidizing Properties of Mars' Polar Regions

This project had two primary goals. The first was to restore and archive the Ultraviolet Spectrometer (UVS) data from the 1971 Mariner 9 (MM71) mission to Mars. The second was to use this revised data set to analyze data of Mars' polar regions to look for and map out the ozone (03) and hydrogen peroxide (H2O2,) features. Data restoration and archiving activities for this project have resulted in the restoration of 100% of the original Mariner 9 raw data set as well as many of the secondary analysis data sets. These data sets have been submitted to the Planetary Data System (PDS) Atmospheric Node, long with their PDS labels and descriptive metadata.

Hendrix, Amanda↗