Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plasma mirror”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

High rate reactive sputtering in an opposed cathode closed-field unbalanced magnetron sputtering system

Attention is given to an opposed cathode sputtering system constructed with the ability to coat parts with a size up to 15 cm in diameter and 30 cm in length. Initial trials with this system revealed very low substrate bias currents. When the AlNiCo magnets in the two opposed cathodes were arranged in a mirrored configuration, the plasma density at the substrate was low, and the substrate bias current density was less than 1 mA/sq cm. If the magnets were arranged in a closed-field configuration where the field lines from one set of magnets were coupled with the other set, the substrate bias current density was as high as 5.7 mA/sq cm when NdFeB magnets were used. In the closed-field configuration, the substrate bias current density was related to the magnetic field strength between the two cathodes and to the sputtering pressure. Hard well-adhered TiN coatings were reactively sputtered in the opposed cathode system in the closed-field configuration, but the mirrored configuration produced films with poor adhesion because of etching problems and low plasma density at the substrate.

Sproul, William D.↗
DOE OSTI2021

Study of detached plasma profile in the divertor simulation experimental module of tandem mirror GAMMA 10/PDX

A divertor simulation experimental module (D-module) in the tandem mirror GAMMA 10/PDX was used for the study of plasma detachment. In previous studies, it was difficult to measure far-upstream plasma parameters in the D-module, and only electrostatic probes on the target plate were used to perform electron temperature and density measurements. Furthermore, to study the detached plasma structure, a Thomson scattering (TS) system and a microwave interferometer system have been installed to measure the inside plasma parameters of the D-module, and a movable electrostatic probe has been placed at the inlet of the D-module to measure the inlet plasma density and temperature. The TS system in the central cell observed the electron temperature and density of the core plasma simultaneously. These measurements revealed the entire density and temperature structure from the core plasma to the divertor plate. The line average electron density measured by the microwave interferometer showed a rollover behavior during detachment. The results indicated that the ionization region was located around the center of the D-module, and it appears to move upstream along the axis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1979

Auroral magnetosphere-ionosphere coupling: A brief topical review

Auroral arcs result from the acceleration and precipitation of magnetospheric plasma in narrow regions characterized by strong electric fields both perpendicular and parallel to the Earth's magnetic field. The various mechanisms proposed for the origin of such strong electric fields include electrostatic double layers, double reverse shocks, anomalous resistivity, magnetic mirroring of hot plasma, mapping of the magnetospheric convection electric field through an auroral discontinuity.

Chiu, Y. T.↗
NASA NTRS2003

Investigation of a Light Gas Helicon Plasma Source for the VASIMR Space Propulsion System

An efficient plasma source producing a high-density (approx.10(exp 19/cu m) light gas (e.g. H, D, or He) flowing plasma with a high degree of ionization is a critical component of the Variable Specific Impulse Magnetoplasma Rocket (VASIMR) concept. We are developing an antenna to apply ICRF power near the fundamental ion cyclotron resonance to further accelerate the plasma ions to velocities appropriate for space propulsion applications. The high degree of ionization and a low vacuum background pressure are important to eliminate the problem of radial losses due to charge exchange. We have performed parametric (e.g. gas flow, power (0.5 - 3 kW), magnetic field , frequency (25 and 50 MHz)) studies of a helicon operating with gas (H2 D2, He, N2 and Ar) injected at one end with a high magnetic mirror downstream of the antenna. We have explored operation with a cusp and a mirror field upstream. Plasma flows into a low background vacuum (<10(exp -4) torr) at velocities higher than the ion sound speed. High densities (approx. 10(exp 19/cu m) have been achieved at the location where ICRF will be applied, just downstream of the magnetic mirror.

Squire, J. P.↗
NASA NTRS1979

Auroral magnetosphere-ionosphere coupling: A brief topical review

Auroral arcs result from the acceleration and precipitation of magnetospheric plasma in narrow regions characterized by strong electric fields both perpendicular and parallel to the earth's magnetic field. The various mechanisms that were proposed for the origin of such strong electric fields are often complementary Such mechanisms include: (1) electrostatic double layers; (2) double reverse shock; (3) anomalous resistivity; (4) magnetic mirroring of hot plasma; and (5) mapping of the magnetospheric-convection electric field through an auroral discontinuity.

Chiu, Y. T.↗
DOE OSTI2023

Suppression of bremsstrahlung losses from relativistic plasma with energy cutoff

We study the effects of redistributing superthermal electrons on Bremsstrahlung radiation from hot relativistic plasma. We consider thermal and nonthermal distribution of electrons with an energy cutoff in the phase space and explore the impact of the energy cutoff on Bremsstrahlung losses. We discover that the redistribution of the superthermal electrons into lower energies reduces radiative losses, which is in contrast to nonrelativistic plasma. Lastly, we discuss the possible relevance of our results for open magnetic field line configurations and prospects of the aneutronic fusion based on proton-Boron11 (p-B11) fuel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1973

Active cleaning techniques for removing contamination from optical surfaces in space

Research in developing an active cleaning technique for removing contaminants from optical surfaces in space is reported. In situ contamination/cleaning experiments were conducted on gold and platimum coated mirrors, which were contaminated by exposure to UV radiation in a 1,3, butadiene environment. Argon and oxygen plasma exposure cleaned the mirrors equally well. Silicone cleaning experiments were also conducted. Exposure of the contaminated mirrors to helium, oxygen, and hydrogen plasmas restored the reflectance at the shorter wavelengths and degraded it at the longer wavelengths.

Shannon, R. L.↗
DOE OSTI2020

Heat pump via charge incompressibility in a collisional magnetized multi-ion plasma

Stratification due to ion-ion friction in a magnetized multiple-ion species plasma is shown to be accompanied by a heat pump effect, identified for the first time here, transferring heat from one ion species to another as well as from one region of space to another. Here, the heat pump is produced via newly identified heating mechanisms associated with charge incompressibility and the Ettingshausen effect. Besides their academic interest, these new effects may have useful applications to plasma technologies that involve rotation or compression.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1981

Theory of the auroral magnetosphere

The aurora is understood as a manifestation of energy transfer and plasma transfer from the solar wind to the magnetosphere. The auroral oval seems to be a mapping of the boundary layer that lies just inside the magnetospheric surface, which consists of the magnetopause and neutral sheet. The auroral oval is consequently a region of reversal for the meridional component of the magnetospheric convection electric field and thus a region of strong shear in the plasma drift velocity field. The velocity shear seems to account for the formation of eddies in the auroral curtain. Moreover, the kinematical impedance associated with hot auroral plasma in magnetic mirror geometry makes it impossible for the reversal of the perpendicular (meridional) electric field across a narrow region of latitude to occur without the formation of a large parallel electric field.

Schulz, M.↗
NASA NTRS1995

Ultra low frequency waves at the Earth's bow shock

The Earth's bow shock is a bountiful generator of waves. Some of these waves have group velocities that exceed the solar wind velocity directed into the shock and can propagate upstream against the flow. Upstream whistlers observed close to one Hertz in the spacecraft frame have been seen many Earth radii upstream. A second whistler mode wave, called the precursor, propagates upstream along the shock normal but is phase standing in the solar wind flow. The damping of both whistler mode waves is consistent with Landau damping. At low Mach numbers the precursor is connected to the non-coplanarity component in the shock ramp. At higher Mach numbers the upstream waves cannot propagate upstream and ion reflection becomes more important in providing free energy for wave particle interactions. The non-coplanarity component is still present but it now initiates a downstream wave train. Generally the waves just downstream from the bow shock are left hand circularly polarized ion cyclotron waves propagating along the magnetic field at the Alfven velocity. When the upstream Mach number is high and the helium content of the plasma is high, mirror mode waves are observed.

Russell, C. T.↗
NASA NTRS1975

Hot ion plasma production in HIP-1 using water-cooled hollow cathodes

The paper reports on hot-ion plasma experiments conducted in a magnetic mirror facility. A steady-state E x B plasma was formed by applying a strong radially inward dc electric field near the mirror throats. Most of the results were for hydrogen, but deuterium and helium plasmas were also studied. Three water-cooled hollow cathodes were operated in the hot-ion plasma mode with the following results: (1) thermally emitting cathodes were not required to achieve the hot-ion mode; (2) steady-state operation (several minutes) was attained; (3) input powers greater than 40 kW were achieved; (4) cathode outside diameters were increased from 1.2 cm (uncooled) to 4.4 cm (water-cooled); (5) steady-state hydrogen plasmas with ion temperatures from 185 to 770 eV and electron temperatures from 5 to 21 eV were produced. Scaling relations were empirically obtained for discharge current, ion temperature, electron temperature, and relative ion density as a function of hydrogen gas feed rate, magnetic field, and cathode voltage.

Reinmann, J. J.↗
DOE OSTI2022

Kinetic simulations of collision-less plasmas in open magnetic geometries

Laboratory plasmas in open magnetic geometries can be found in many different applications such as (a) scrape-of-layer (SOL) and divertor regions in toroidal confinement fusion devices, (b) linear divertor simulators, (c) plasma-based thrusters and (d) magnetic mirrors etc. A common feature of these plasma systems is the need to resolve, in addition to velocity space, at least one physical dimension (e.g. along flux lines) to capture the relevant physics. In general, this requires a kinetic treatment. Fully kinetic particle-in-cell (PIC) simulations can be applied but at the expense of large computational effort. A common way to resolve this is to use a hybrid approach: kinetic ions and fluid electrons. In the present work, the development of a hybrid PIC computational tool suitable for open magnetic geometries is described which includes (a) the effect of non-uniform magnetic fields, (b) finite fully-absorbing boundaries for the particles and (c) volumetric particle sources. Analytical expressions for the momentum transport in the paraxial limit are presented with their underlying assumptions and are used to validate the results from the PIC simulations. A general method is described to construct discrete particle distribution functions in a state of mirror-equilibrium. This method is used to obtain the initial state for the PIC simulation. Collisionless simulations in a mirror geometry are performed. The results show that the effect of magnetic compression is correctly described and momentum is conserved. The self-consistent electric field is calculated and is shown to modify the ion velocity distribution function in a manner consistent with analytic theory. Based on this analysis, the ion distribution function is understood in terms of a loss-cone distribution and an isotropic Maxwell-Boltzmann distribution driven by a volumetric plasma source. Finally, the inclusion of a Monte Carlo based Fokker-Planck collision operator is discussed in the context of future work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1994

Pondermotive versus mirror force in creation of the filamentary cavities in auroral plasma

Recently rocket observations on spikelets of lower-hybrid waves along with strong density cavities and transversely heated ions were reported. The observed thin filamentary cavities oriented along the magnetic field in the auroral plasma have density depletions up to several tens of percent. These observations have been interpreted in terms of a theory for lower-hybrid wave condensation and collapse. The modulational instability leading to the wave consensation of the lower-hybrid waves yields only weak density perturbations, which cannot explain the above strong density depletions. The wave collapse theory is based on the nonlinear pondermotive force in a homogeneous ambient plasma and the density depletion is determined by the balance between the wave pressure (pondermotive force) and the plasma pressure. In the auroral plasma, the balance is achieved in a time tau(sub wc) equal to or less than 1 ms. It is shown here that the mirror force, acting on the transversely heated ions at a relatively long time scale, is an effective mechanism for creating the strong plasma cavities. We suggest that the process of wave condensation, through the pondermotive force causing generation of short wavelength waves from relatively long wavelength waves, is a dominant process until the former waves evolve and become effective in the transverse heating of ions. As soon as this happens, mirror force on ions becomes an important factor in the creation of the density cavities, which may further trap and enhance the waves. Results from a model of cavity formation by transverse ion heating show that the observed depletions in the density cavities can be produced by the heating rates determined by the observed wave amplitudes near the lower-hybrid frequency. It is found that the creation of a strong density cavity takes a few minutes.

Singh, Nagendra↗
NASA NTRS1988

A mirror instability associated with newly created ions in a moving plasma

Using a plasma model in which the ambient magnetic field is parallel to the z axis and the wave vector, an instability that resembles the usual hydromagnetic mirror instability is demonstrated. The instability is caused by freshly created ions in a moving plasma; the source of its free energy is associated with the ring distribution of the newly created ions, resulting in a high ion kinetic temperature in the direction transverse to the ambient magnetic field. The results of a stability analysis indicate that this instability can lead to the amplification of magnetosonic waves.

Wu, C. S.↗
DOE OSTI2024

On a High-Mirror Stellarator Reactor Exploratory Concept With Neutrons Concentrated on Centrifuge Liquids

In the framework of fusion energy research based on magnetic confinement, stellarators allow numerous degrees of freedom for the design of the magnetic trap and plasma shape. Taking advantage of these features, some plasma shapes might benefit several of the many integrated elements involved in commercial fusion reactors, like, e.g., decreasing the number, mass and complexity of replaced activated in-vessel components (IVC) (i.e., by using liquids), extraction of large power, tritium generation, and remote maintenance. Certainly, free-surface liquid materials were proposed for tokamaks and field-reversed configuration (FRC) to try to improve some of such elements, i.e., in advanced power extraction (APEX) studies. Some reactor-relevant quasi-isodynamic (QI) magnetic configurations exhibit a relatively straight sector of plasma and high magnetic mirror. The combination of those elements and possibilities in a single stellarator reactor concept might have some advantages, in spite of the uncertainties due to the current low technological readiness level (TRL). The proposed and studied reactor concept is based on a vacuum vessel having short curved sectors and longer wide cylindrical sectors, which encloses a high-mirror low-vertical-excursion magnetic configuration, and swirling liquids or rotating cylinders, which centrifuge molten Li salts located at the low field region. Thus, the molten salts (if possible covered by a thin layer of liquid lithium) would be located on the internal perimeter of the cylinder, to act as particle exhaust (except for helium), neutron power extractor, and tritium breeder. The high-mirror feature tries to concentrate the neutron power at the cylindrical sectors, which might avoid using breeding materials at the curved sectors. The different elements of the concept are exploratorily studied and defined, and the difficulties assessed.

centrifuge↗
NASA NTRS1976

Parametric dependence of ion temperature and relative density in the NASA Lewis SUMMA facility

Further hot-ion plasma experiments were conducted in the SUMMA superconducting magnetic mirror facility. A steady-state plasma with mutually perpendicular magnetic and electric fields was formed by applying a strong radially inward dc electric field between cylindrical anodes and hollow cathodes located near the magnetic mirror maxima. Extending the use of water cooling to the hollow cathodes, in addition to the anodes, resulted in higher maximum power input to the plasma. Steady-state hydrogen plasmas with ion kinetic temperatures as high as 830 eV were produced. Functional relations were obtained empirically among the plasma current, voltage, magnetic flux density, ion temperature, and relative ion density. The functional relations were deduced by use of a multiple correlation analysis. Data were obtained for midplane magnetic fields from 0.5 to 3.37 tesla and input power up to 45 kW. Also, initial absolute electron density measurements are reported from a 90 deg Thomson scattering laser system.

Snyder, A.↗
NASA NTRS1993

Self-consistent formation of parallel electric fields in the auroral zone

This paper presents results from a fully self-consistent kinetic particle simulation of the time-dependent formation of large scale parallel electric fields in the auroral zone. The results show that magnetic mirroring of the hot plasma that streams earthward from the magnetotail leads to a charge separation potential drop of many kilovolts, over an altitude range of a few thousand kilometers. Once the potential drop is formed, it remains relatively static and is maintained in time by the constant input of hot plasma from the tail; the parallel electric field accelerates ions away from Earth and ionospheric electrons towards the Earth. At altitudes above where the ions are mirror reflected and accelerated by the parallel electric field, low frequency waves are generated, possibly due to an ion/ion two-stream interaction.

Schriver, David↗