Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Upscaling Methane Flux From Plot Level to Eddy Covariance Tower Domains in Five Alaskan Tundra Ecosystems

Spatial heterogeneity in methane (CH 4 ) flux requires a reliable upscaling approach to reach accurate regional CH 4 budgets in the Arctic tundra. In this study, we combined the CLM-Microbe model with three footprint algorithms to scale up CH 4 flux from a plot level to eddy covariance (EC) tower domains (200 m × 200 m) in the Alaska North Slope, for three sites in Utqiaġvik (US-Beo, US-Bes, and US-Brw), one in Atqasuk (US-Atq) and one in Ivotuk (US-Ivo), for a period of 2013–2015. Three footprint algorithms were the homogenous footprint (HF) that assumes even contribution of all grid cells, the gradient footprint (GF) that assumes gradually declining contribution from center grid cells to edges, and the dynamic footprint (DF) that considers the impacts of wind and heterogeneity of land surface. Simulated annual CH 4 flux was highly consistent with the EC measurements at US-Beo and US-Bes. In contrast, flux was overestimated at US-Brw, US-Atq, and US-Ivo due to the higher simulated CH 4 flux in early growing seasons. The simulated monthly CH 4 flux was consistent with EC measurements but with different accuracies among footprint algorithms. At US-Bes in September 2013, RMSE and NNSE were 0.002 μmol m −2 s −1 and 0.782 using the DF algorithm, but 0.007 μmol m −2 s −1 and 0.758 using HF and 0.007 μmol m −2 s −1 and 0.765 using GF, respectively. DF algorithm performed better than the HF and GF algorithms in capturing the temporal variation in daily CH 4 flux each month, while the model accuracy was similar among the three algorithms due to flat landscapes. Temporal variations in CH 4 flux during 2013–2015 were predominately explained by air temperature (67–74%), followed by precipitation (22–36%). Spatial heterogeneities in vegetation fraction and elevation dominated the spatial variations in CH 4 flux for all five tower domains despite relatively weak differences in simulated CH 4 flux among three footprint algorithms. The CLM-Microbe model can simulate CH 4 flux at both plot and landscape scales at a high temporal resolution, which should be applied to other landscapes. Integrating land surface models with an appropriate algorithm provides a powerful tool for upscaling CH 4 flux in terrestrial ecosystems.

54 ENVIRONMENTAL SCIENCES↗

EPCAPE Quick-look Plots

Daily summary and comparison plots for the ARM and guest instruments deployed from February 15, 2023 to February 14, 2024 at Mt. Soledad and Scripps Pier as part of the Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE). The atmospheric observations include aerosol, cloud, thermodynamic, dynamic, and radiative properties organized to provide inter-instrument and inter-site comparisons for each sampling day. The plots are available at the following link: https://wordpress.cels.anl.gov/clouds/epcape-plots/

54 ENVIRONMENTAL SCIENCES↗

Vegetation Warming Experiment: Chamber and ambient plot digital camera imagery for vegetation phenology, Utqiagvik (Barrow), Alaska, 2019

Time lapse photography of experimental plots within five warming chambers (ZPWs) and paired control plots located on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. Images were recorded from 21 June to 25 September, 2019 to capture vegetation dynamics during the growing season. Vegetation phenology, including green up and senescence were captured. Images were recorded daily at 30 minute intervals, from 09:00 - 16:30 Alaska daylight time (AKDT, UTC-8), using Wingscapes TimelapseCam cameras. The target species was Eriophorum angustifolium. Image files (.jpg) captured by Wingscapes TimelapseCams, compressed as zip files. Additional information in *.pdf and *.csv files. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Vegetation Warming Experiment: Chamber and ambient plot digital camera imagery for vegetation phenology, Utqiagvik (Barrow), Alaska, 2017

Time lapse photography (*.jpg) of experimental plots within five warming chambers (ZPWs) and paired control plots located on the Barrow Environmental Observatory (BEO), Barrow (now Utqiagvik), Alaska. Images were recorded from 21 June to 18 September, 2017 to capture vegetation dynamics during the growing season. Vegetation phenology, including green up and senescence were captured. Images were recorded daily at 30 minute intervals, from 11:00-14:30 Alaska daylight time (AKDT, UTC-8), using Wingscapes TimelapseCam cameras. The target species was Petasites frigidus. Also included multiple metadata files including reporting formats as *.pdf and *.csv files. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Vegetation Warming Experiment: Chamber and ambient plot digital camera imagery for vegetation phenology, Utqiagvik (Barrow), Alaska, 2021

Time lapse photography of experimental plots within five warming chambers (ZPWs) and paired control plots located on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. Images were recorded from 17 June to 19 September, 2021 to capture vegetation dynamics during the growing season. Vegetation phenology, including green up and senescence were captured. Images were recorded daily at 30 minute intervals, from 09:00 - 16:30 Alaska daylight time (AKDT, UTC-8), using Wingscapes TimelapseCam Pro cameras. The target species was Carex aquatilis. Individual jpg images from each camera have been combined in zip format. The data package includes a metadata document with example fields of view from each camera (*.pdf). The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Vegetation Warming Experiment: Chamber and ambient plot digital camera imagery for vegetation phenology, Utqiagvik (Barrow), Alaska, 2018

Time lapse photography of experimental plots within five warming chambers (ZPWs) and paired control plots located on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. Images were recorded from 17 June to 24 September, 2018 to capture vegetation dynamics during the growing season. Vegetation phenology, including green up and senescence were captured. Images are *.jpg files recorded daily at 30 minute intervals, from 11:00 - 14:30 Alaska daylight time (AKDT, UTC-8), using Wingscapes TimelapseCam cameras. The target species was Arctagrostis latifolia. Additional information in *.pdf and *.csv files. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Computer programs for plotting curves with various dashed-line sequences

Two FORTRAN-callable subprograms have been written to draw a smooth curve through a set of input points as a solid line or as a general sequence of long and short dashes. Subroutine LINSEQ draws conventional curves whereas subroutine CONSEQ draws smooth closed curves (contours). The subprograms are based on an approximate calculation of the arc length along the curve and spline interpolation along the arc length. Options are provided for smoothing of the input data and for offsetting the plotted curve from the input data points. The method of calculation of the arc length and the generation of the line sequence are described.Usage descriptions of the main subprograms, sample calling programs illustrating the various features of the subprograms, and sample plots are given. The subroutines should be readily adaptable to almost any computer-driven incremental plotter.

Desmarais, R. N.↗

Carpet plot data format

Analysis and interpretation of data is the crucial phase of the decision making process. The interplay between variables must be considered as to their relative significance upon the final result, and sometimes time-sensitive decisions must be made when actual events deviate from predicted information, such as Apollo 13. As the number of variables increases past say four, the traditional method of cross-plotting tends to break down, and digital/analog results cannot present a sharply defined method of analysis. A graphical system, the carpet plot, is presented in which an unlimited number of complicated relationships of variables can be evaluated.

Byrne, J. M.↗

Plotting program for aerodynamic lifting surface theory

A description of and users manual for a USA FORTRAN IV computer program which plots the planform and control points of a wing are presented. The program also plots some of the configuration data such as the aspect ratio. The planform data is stored on a disc file which is created by a geometry program. This program, the geometry program, and several other programs are used together in the analysis of lifting, thin wings in steady, subsonic flow according to a kernel function lifting surface theory.

Medan, R. T.↗

NASTRAN variance analysis and plotting of HBDY elements

The NASTRAN Thermal Analyzer has been intended to do variance analysis and plot the thermal boundary elements. The objective of the variance analysis addition is to assess the sensitivity of temperature variances resulting from uncertainties inherent in input parameters for heat conduction analysis. The plotting capability provides the ability to check the geometry (location, size and orientation) of the boundary elements of a model in relation to the conduction elements. Variance analysis is the study of uncertainties of the computed results as a function of uncertainties of the input data. To study this problem using NASTRAN, a solution is made for both the expected values of all inputs, plus another solution for each uncertain variable. A variance analysis module subtracts the results to form derivatives, and then can determine the expected deviations of output quantities.

Harder, R. L.↗

A semi-automated system for plotting and computer cataloging of remote sensing imagery

Description of a computer-assisted system for plotting and descriptor-cataloging of aerial imagery - an ingredient of the aerial image data handling system of the NASA Earth Resources Aircraft Project (ERAP). The system under consideration uses two graphic tablets linked interactively with a digital computer as input devices for deriving frame coordinates by correlating image points to map points. The various software programs and operating modes facilitate a semiautomatic plotting of an image by selecting two or more points within the image for matching with map details. The computer performs the scaling and orientation transformations for the calculation of the center and corner coordinates of the frame. Twenty five other descriptors for each frame are fed into a computerized data base requiring a minimum operator's time for verification and correction.

Gnauck, G. E.↗

Vector plotting as an indication of the approach to flutter

A binary flexure-torsion analysis was made to check theoretically a method for predicting flutter which depends on plotting vectorially the amplitudes of response relative to the exciting force and extracting the relevant damping rate. The results of this calculation are given in graphs both of the vector plots themselves and of the estimated damping rate against forward speed. The estimated damping rates are compared with calculated values. The method has the advantage that in a flight flutter test damping can be estimated from continuous excitation records: the method is an extension of the Kennedy and Pancu technique used in ground resonance testing.

Broadbent, E. G.↗

IMS/Satellite Situation Center report. Predicted orbit plots for Vela 5B, 1976

Predicted orbit plots for the Vela 5B satellite are presented for the time period January-December 1976. This satellite has been identified as an important possible contributor to the International Magnetospheric Study (IMS) project. The predicted orbit plots are shown in three projections. The time period covered by each set of projections is 4 days 16 hours, corresponding approximately to the period of Vela 5B. The three coordinate systems used are the Geocentric Solar Ecliptic system (GSE), the Geocentric Solar Magnetospheric system (GSM), and the Solar Magnetic system (SM).

Source record↗

Plotting max/min data envelopes

Study of maximum and minimum load distributions along structural section is aided by visual display of load distribution data. Maximum/minimum envelope plot program plots these envelopes of the stresses and shear loads at selected points in beam modeled by series of finite elements. Digital output for engineers and management is presented for quick analysis and understanding.

Furuike, T.↗

Description of a FORTRAN subroutine for plotting three-dimensional data

A FORTRAN subroutine is described which provides the capability to plot three-dimensional data on an interactive cathode-ray-tube computer terminal or conventional plotter. The plotted data, which must be described in terms of a series of two-dimensional curves, appeared to form a surface in three-dimensional space. Features are included of the subroutine's capability for hidden-line computations. User instructions and sample programs are described.

James, M. R.↗

An investigation of wing buffeting response at subsonic and transonic speeds. Phase 1: F-111A flight data analysis. Volume 2: Plotted power spectra

Volume 2 of this three volume report is presented. This volume presents plotted variations of power spectral density data with frequency for each structural response item for each data sampled and analyzed during the course of the investigation. Some of the information contained in Volume 1 are repeated to allow the reader to identify the specific conditions appropriate to each plot presented and to interpret the data.

Benepe, D. B.↗