Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer Networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Semi-Interpenetrating Polymer Networks

Desirable qualities achieved by "networking" aromatic and addition polyimides. Novel semi-interpenetrating network (semi-ipn) prepared from two types of polyimides. Semi-ipn results when linear polymer synthesized in presence of cross-linked polymer or vice-versa. Semi-ipn attains certain properties better than those of either polymer alone.

St. Clair, T. L.↗

Tunable Crosslinked Ether Polymer Network Electrolytes for High‐Performance All‐Solid‐State Sodium Batteries

All-solid-state batteries (ASSBs) are critical for achieving high energy density and enhanced safety. Solid polymer electrolytes (SPEs) offer key advantages over other electrolytes, including improved safety, flexibility, and interfacial contact. Among the SPEs, ether-based polymers are widely studied due to their ease of processing and high ionic conductivity (σi) in the amorphous state. In this work, the introduction of poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) into an SPE matrix composed of poly(ethylene glycol) diacrylate (PEGDA), poly(ethylene glycol) (PEG2k), and sodium bis(fluorosulfonyl)imide (NaFSI) salt is investigated to facilitate the formation of amorphous, high σ i SPEs through end-group engineering and polymer ratio optimization. PEGMEMA enhances structural integrity via crosslinking with PEGDA through its methacrylate group, while its methyl end group aids ion conduction. A 2:1:7 ratio of PEGDA:PEGMEMA:PEG2k exhibits a σi of 1.16 x 10 -4 S cm -1 and oxidative stability up to 4.4 V at 60 °C. A solid-state cell incorporating this SPE, a Na 2/3 Ni 1/3 Mn 2/3 O 2 (NM12) cathode, and a sodium-metal anode demonstrates excellent cycling stability, retaining over 80 % of its initial capacity for 150 cycles at 60 °C. The findings highlight the potential of end-group engineering in improving the electrochemical performance of SPEs.

25 ENERGY STORAGE↗

Accessing pluripotent materials through tempering of dynamic covalent polymer networks

Pluripotency, which is defined as a system not fixed as to its developmental potentialities, is typically associated with biology and stem cells. Here, inspired by this concept, we report synthetic polymers that act as a single “pluripotent” feedstock and can be differentiated into a range of materials that exhibit different mechanical properties, from hard and brittle to soft and extensible. To achieve this, we have exploited dynamic covalent networks that contain labile, dynamic thia-Michael bonds, whose extent of bonding can be thermally modulated and retained through tempering, akin to the process used in metallurgy. In addition, we show that the shape memory behavior of these materials can be tailored through tempering and that these materials can be patterned to spatially control mechanical properties.

36 MATERIALS SCIENCE↗

Genetically Engineered Elastomeric Polymer Network through Protein Zipper Assembly

The rich palette of chemical and functional diversity found within peptides has driven the recent interest in bottom–up assembly of soft polypeptide–based materials. Herein, we describe the creation of a novel helix–elastin like polymer or HELP. HELP marries the specificity of coiled–coil interactions with the elasticity and stimuli–responsive behavior of elastin, a class of polymers with extraordinary elasticity. We used Rosetta to computationally design highly specific protein helical zippers to connect short elastin segments. As a result, the programmed pairing between the helical blocks of two individual chains produced a genetically encoded material that, when deposited on a substrate, formed a flexible and porous 2D planar network with controllable porosity that responds dynamically upon application of stimuli.

36 MATERIALS SCIENCE↗

Dynamic Polymer Networks for On Demand Degradable Adhesives, Scaffolds, and Templates (Full Technical Report)

This feasibility study was motivated by a need for alternative mandrel materials to meet the next generation of inertial confinement fusion (ICF) ablator capsules. In response, a new polymer material based on reversible covalent bonds was proposed, with the objective to design thermosets to withstand elevated temperatures (140-200 degrees Celsius) while also being thermally degradable on-demand via controlled decomposition at temperatures above 200 degrees Celsius. A series of cyclopentadiene (Cp) containing thermosets were designed and synthesized to evaluate curing, reversibility and degradability via controlled retro-Diels Alder reactions using Cp-cycloaddition adducts as crosslinks. Ultimately, the current iteration of materials and strategy pursued in this study was assessed as impractical for meeting the needs and objectives of Lawrence Livermore National Laboratory’s (LLNL) target fabrication program.

36 MATERIALS SCIENCE↗

A tough performance simultaneous semi-interpenetrating polymer network

A semi-interpenetrating polyimide (semi-IPN) network and methods for making and using the same are disclosed. The semi-IPN system comprises a high performance thermosetting polyimide having an acetylene-terminated group acting as a crosslinking site and a high performance linear thermoplastic polyimide. The polymer is made by combining low viscosity precursors and low molecular weight polymers of the thermosetting and thermoplastic polyimides and allowing them to react in the immediate presence of each other to form a simultaneous semi-interpenetrating polyimide network. Provided is a high temperature system having significantly improved processability and damage tolerance while maintaining excellent thermo-oxidative stability, mechanical properties and resistance to humidity, when compared with the commercial high temperature resin, Thermid 600. This material is particularly adapted for use as a molding, adhesive and advanced composite matrix for aerospace structural and electronic applications.

Pater, Ruth H.↗

Achieving ultrahigh modulus of resilience and enhanced thermal stability in ZnO x /SU-8 interpenetrating network polymer nanocomposite nanopillars

The modulus of resilience, a mechanical property that quantifies the maximum strain energy density a material can store during elastic deformation, is a crucial parameter for materials used in flexible displays, micro/nano-electro-mechanical system (M/NEMS) actuators, and ultra-sensitive pressure sensors. In this study, ZnO x /SU-8 nanocomposite nanopillars with a diameter of 300 nm, fully infiltrated with a uniformly distributed, interpenetrating amorphous ZnO x filler network, were synthesized via vapor-phase infiltration (VPI). In-situ uniaxial nano-compression tests revealed that the modulus of resilience of ZnO x /SU-8 reaches ∼ 12 MJ/m 3 , which is an ultrahigh value among all engineering materials with comparable strength. In addition, the synthesis fidelity, inorganic infiltration depth, and mechanical performance were all significantly improved compared to VPI-synthesized AlO x nanocomposites. Thermal stability, another key requirement for M/NEMS device materials operating under extreme environments, was also notably enhanced. Furthermore, partial crystallization of the amorphous ZnO x fillers during annealing contributed to an additional increase in modulus of resilience, reaching up to ∼ 13.9 MJ/m 3 . This work presents an effective fabrication strategy for producing nanostructured organic–inorganic hybrid nanocomposites with ultrahigh modulus of resilience and superior thermal stability, paving the way for their integration into next-generation flexible displays and high-performance M/NEMS devices working under harsh environments.

36 MATERIALS SCIENCE↗

A novel structure and photochromism of heteropolyoxometalates dispersed in polymer networks

Nanocomposites based on Keggin structure tungstophosphate acid (PWA) with 'branch-like' nanometer well dispersed in poly(acrylamide-co-vinylamine) (PAM-co-PVAm) were fabricated. The microstructure and photochromic properties were studied via Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), transmission electron microscope (TEM), ultraviolet-visible spectra (UV-vis) and electron resonance spectra (ESR). FT-IR results showed that the Keggin geometry of polyoxometalates was still preserved inside the composites and hydrogen bonding and salt formation were built between PWA and polymer matrix. SEM and TEM images showed that PWA nanoparticles were finely dispersed in polymer matrix with 'branch-like' shape. Under UV irradiation, the film was reduced photochemically to yield a glaucous species. After UV light turned off, the color of film became green. Two photo-reduction processes (one was between acylamino and heteropoly acid, another was between amidocyanogen and heteropoly acid) occurred at the same time in PWA/PAM-co-PVAm system, which resulted in the formation of heteropolygreen. - Graphical abstract: Two absorption bands appeared after UV irradiated. In bleaching process, the peaks at 620-820 nm disappeared and those at 420 nm still presented. Due to synergies happened between heteropolyacid and PAM-co-PVAm, heteropolygreen was formed. Highlights: Black-Right-Pointing-Pointer 'Branch-like' composites were fabricated by dispersed PWA into PAM-co-PVAm system. Black-Right-Pointing-Pointer Two photo-reduction processes occurred simultaneously in PWA/PAM-co-PVAm system. Black-Right-Pointing-Pointer Heteropolygreen was formed by synergies of hydrogen bonding and salt formation.

36 MATERIALS SCIENCE↗

A self-healing plastic ceramic electrolyte by an aprotic dynamic polymer network for lithium metal batteries

Abstract Oxide ceramic electrolytes (OCEs) have great potential for solid-state lithium metal (Li 0 ) battery applications because, in theory, their high elastic modulus provides better resistance to Li 0 dendrite growth. However, in practice, OCEs can hardly survive critical current densities higher than 1 mA/cm 2 . Key issues that contribute to the breakdown of OCEs include Li 0 penetration promoted by grain boundaries (GBs), uncontrolled side reactions at electrode-OCE interfaces, and, equally importantly, defects evolution (e.g., void growth and crack propagation) that leads to local current concentration and mechanical failure inside and on OCEs. Here, taking advantage of a dynamically crosslinked aprotic polymer with non-covalent –CH 3 ⋯CF 3 bonds, we developed a plastic ceramic electrolyte (PCE) by hybridizing the polymer framework with ionically conductive ceramics. Using in-situ synchrotron X-ray technique and Cryogenic transmission electron microscopy (Cryo-TEM), we uncover that the PCE exhibits self-healing/repairing capability through a two-step dynamic defects removal mechanism. This significantly suppresses the generation of hotspots for Li 0 penetration and chemomechanical degradations, resulting in durability beyond 2000 hours in Li 0 -Li 0 cells at 1 mA/cm 2 . Furthermore, by introducing a polyacrylate buffer layer between PCE and Li 0 -anode, long cycle life >3600 cycles was achieved when paired with a 4.2 V zero-strain cathode, all under near-zero stack pressure.

36 MATERIALS SCIENCE↗