Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power Conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

2020 Component Innovation Awardee: Windurance LLC

Currently, there is no wind system power-conversion component available to wind turbine OEMs that is certified to applicable standards for use in the U.S. distributed wind energy market. Off-the-shelf industrial drives have features that are not needed by distributed wind OEMs and lack other features that would be valuable for the operation and control of wind turbine generating systems. In addition to adding costs for OEMs, these industrial drives increase uncertainty and risk for project developers and prospective owners. All of this presents barriers and increases costs for the development of distributed wind in the United States. With funding from CIP, Windurance plans to develop an industry-specific power-conversion component that will offer application-specific features at lower cost for distributed wind OEMs.

CIP↗
DOE OSTI2021

Optical Characterization of Defects in High-Efficiency (Ag,Cu)(In,Ga)Se2

We applied time-resolved photoluminescence (TRPL) spectroscopy to study optimized chalcopyrite (Ag,Cu)(In,Ga)Se2 thin films. The device shows power conversion efficiency of 18.7%. The metastable defect VSe-VCu within ACIGS at EV+0.98 eV is detected in sub-bandgap TRPL excitation spectra. TRPL lifetime of 50 ns is limited by the density of mid-gap defects such as CuGa or CuIn. The similarity of TRPL dynamics before and after light soaking indicates the optimized ACIGS thin film is less metastable because the density of VCu-VSe defect is reduced to below 10^15 cm^-3. This study indicates that ACIGS has improved cell efficiency and reliability characteristics.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2020

Low-bandgap mixed tin–lead iodide perovskites with reduced methylammonium for simultaneous enhancement of solar cell efficiency and stability

High-performance perovskite/perovskite tandem solar cells require high-efficiency and stable low-bandgap perovskite subcells. State-of-the-art low-bandgap mixed tin–lead iodide perovskite solar cells exhibit either a high power-conversion efficiency or improved stability, but not both. In this article we report a two-step bilayer interdiffusion growth process to simultaneously meet both requirements for formamidinium-based low-bandgap mixed tin–lead iodide perovskite solar cells. The bilayer interdiffusion growth process allows for the formation of high-quality and large-grained perovskite films with only 10 mol% volatile methylammonium. Additionally, one-dimensional pyrrolidinium perovskite was applied to passivate the perovskite film and improve the junction quality, which resulted in a carrier lifetime of 1.1 µs and an open circuit voltage of 0.865 V for our perovskite film and device with a bandgap of 1.28 eV. Our strategies enabled a power-conversion efficiency of 20.4% for low-bandgap perovskite solar cells under AM 1.5G illumination. More importantly, an encapsulated device can retain 92% of its initial efficiency after 450 h of continuous 1 sun illumination.

14 SOLAR ENERGY↗
DOE OSTI2022

A New Low-Temperature Approach for Efficient and Low-Cost Group V Doping in CdTe Thin Film Solar Cells (Final Technical Report)

The goal of this project is to develop a highly efficient low-temperature ex-situ Group V diffusion doping approach in the CdCl 2 treated polycrystalline CdTe film using the group V chlorides (i.e., PCl 3 , AsCl 3 , SbCl 3 , and BiCl 3 ) as dopants source. For the first time, our innovative doping strategies through the low-temperature ex-situ Group V doping process in polycrystalline CdSeTe successfully demonstrated a promising power conversion efficiency of ~19% compared to the Cu-doped counterparts. Our newly developed low-temperature ex-situ group V doping allows dedicated control of group V diffusion amount, generates a desirable depth profile, and is completely compatible with commercial CdTe module manufacturing. We built the partnership with the largest CdTe solar module manufacturing in the US, e.g., First Solar, Inc to further develop these low-temperature diffusion doped CdSeTe solar cells. Our technology was granted US Patent No. US11257977B2. In this project, we systematically investigate and characterize the new ex-situ group V doping mechanisms, defect chemistry, microstructure, and device physics in CdTe solar cells by combining experimental and theoretical means to pave the way to achieve lower cost toward $\$$0.02/kWh and higher power conversion efficiency (PCE) toward 25% in polycrystalline CdTe solar technology. This project will benefit the public by providing more affordable solar electricity and provide an effective way to address climate change.

14 SOLAR ENERGY↗
DOE OSTI2024

Photo-accelerated oxidation of spiro-OMeTAD for efficient carbon-based perovskite solar cells

Metal halide perovskite thin film solar cell (PSC) technology demonstrates promising power conversion efficiency and paves the way to commercialization. So far, the best device performance originates from the n-i-p structure with FTO/SnO 2 /perovskite/Spiro-OMeTAD/Au device architecture. Traditionally, to achieve high efficiency, several hours of oxidization of a Li-doped Spiro-OMeTAD hole transport layer (HTL) is necessary, which hinders the application of Spiro-OMeTAD for rapid large-scale manufacturing. In particular, the oxidization process significantly relies on ambient conditions, including oxygen and moisture levels. In this work, we report a fast technique to accomplish rapid oxidation in several mins of Spiro-OMeTAD HTL in perovskite solar cells by illuminating in visible light with one Sunlight intensity (100 mW cm −2 ). Compared to the traditional approach, our photo-accelerated oxidization of Spiro-OMeTAD approach can deliver a high-power conversion efficiency. We employ this photo-accelerated oxidization for the planar carbon-based perovskite solar cell and achieve a champion device efficiency of 17.47%. This strategy overcomes the barriers for a simple and rapid means toward mass manufacturing and industrial applications by utilizing Spiro-OMeTAD as the HTL for the perovskite solar module.

14 SOLAR ENERGY↗
DOE OSTI2025

Enabling ITO-free perovskite solar cells through n-doped poly(benzodifurandione) (n-PBDF) electrodes

The burgeoning commercialization of perovskite solar cells (PSCs) is propelled by their exceptional power conversion efficiency (PCE), enhanced stability, and ease of fabrication. However, the rigidity of mainstream transparent conductive oxides (TCOs) limits the adaptability of PSCs to various application scenarios. Although alternative materials such as silver nanowires, carbon nanotubes, graphene, and PEDOT:PSS have been evaluated, the p-type nature confines their device designs to inverted architecture and restricts broader applicability. Here, for the first time, a conducting polymer electrode based on n-doped poly(benzodifurandione) (n-PBDF) was used to replace TCOs in PSCs. The n-PBDF electrodes can be readily fabricated via low-temperature, solution-based processes, indicating substantial potential for reducing manufacturing costs. Furthermore, its integration into PSCs has negligible effect on the phase, morphology, or photophysical properties of the perovskite layer, which is comparable to the typical TCOs. After optimization, the n-PBDF-based device achieves a power conversion efficiency of 12.70 and 11.23%, for rigid and flexible devices, respectively. Our study provides a promising alternative to the widely used TCOs in PSCs, highlighting the advantages of using n-doped conducting polymers in terms of processability and flexibility.

Kumar, Prashant [Purdue University, West Lafayette↗
DOE OSTI2020

Surface-Activated Corrosion in Tin–Lead Halide Perovskite Solar Cells

Mixed tin–lead halide perovskite solar cells have promising power conversion efficiencies, but long-term stability is still a challenge. Here, we examine the stability of a 60:40 tin–lead perovskite to better understand diminished device performance upon thermal treatment, both in ambient and inert atmosphere. Operando X-ray diffraction shows a stable bulk structure of the perovskite absorber, leading to the hypothesis that surface chemistry dominates the degradation mechanism. X-ray photoelectron spectroscopy reveals two new observations post-thermal annealing that accompany previously reported Sn 4+ evolution: (i) the formation of I 3 – intermediates preceding I 2 loss at the surface and (ii) evidence of under-coordinated tin and lead surface sites (Sn δ<2+ and Pb δ<2+ , respectively) in inert and ambient conditions. These two species indicate an activated corrosion (i.e., both oxidation and reduction) process at the surface as a possible chemical pathway for degradation, which is expected to be accelerated under operando voltage and light biases.

14 SOLAR ENERGY↗
DOE OSTI2023

High Performing Inverted Flexible Perovskite Solar Cells via Solution Phase Deposition of Yttrium-Doped SnO 2 Directly on Perovskite

Solution processing of flexible perovskite solar cells (f-PSCs) provides an avenue for scalable, high-throughput printing of lightweight, scalable, and cost-effective flexible solar cells. However, the deposition of fully solution-processed metal oxide charge transport layers on perovskites has been limited by solvent incompatibilities and high processing temperatures for metal oxide nanoparticles. In this study, we present high-performance, inverted f-PSCs from the direct deposition of yttrium doped SnO 2 nanoparticles functionalized with acetate on top of perovskite as an ink in anhydrous ethanol via blade coating. Yttrium doping improved device performance by improving the charge extraction leading with a decreased series resistance leading to improvements in the open-circuit voltage and fill factor. Furthermore, the champion power conversion efficiency for 0.1 cm 2 devices increased from 14.3% for undoped SnO 2 to 18.2% with 2% Y:SnO 2 doping, which is unprecedented for f-PSCs on ITO-PET substrate employing SnO 2 as an ETL.

14 SOLAR ENERGY↗
DOE OSTI2020

All Electrospray Printing of Carbon–Based Cost–Effective Perovskite Solar Cells

With the power conversion efficiencies of PSCs exceeding 25%, the perovskite solar cells (PSCs) are closer to step into the initial industrialization. Prior to transferring from laboratory fabrication to industrial manufacturing, issues such as scalability, materials cost, and production line compatibility that significantly impact the manufacturing remain to be addressed. Here we report breakthroughs on all these fronts. Carbon-based PSCs with architecture FTO/electron transport layer/perovskite/carbon, that eliminate the need for the hole transport layer and noble metal electrode, provide ultra-low-cost configuration. This PSC architecture was manufactured using a scalable and industrially compatible electrospray (ES) technique, which enables continuous printing of all the cell layers. The ES deposited electron transport layer and perovskite layer exhibited properties comparable to that of the laboratory-scale spin coating method. The ES deposited carbon electrode layer exhibited superior conductivity and interfacial microstructure in comparison to films synthesized using the conventional doctor blading technique. As a result, the fully ES printed carbon-based PSCs showed a record 14.41% power conversion efficiency, rivaling the state-of-the-art hole transporter-free PSCs. Furthermore, these results will immediately have an impact on the scalable production of PSCs.

14 SOLAR ENERGY↗
DOE OSTI2025

Cross-cutting strategies to lower electricity use of miscellaneous electric loads in the domestic sector

Miscellaneous Electric Loads (MELs) account for roughly one quarter of building electricity use in most developed countries. A product-specific approach to lowering MELs electricity use in this category takes too long and costs too much because there are so many MELs, each providing unique services. An alternative approach focusing on key functionalities was therefore explored. These functionalities include: (1) power management, (2) power scaling, and (3) power conversion. Cross-cutting efficiency improvements to these functionalities can be incorporated into broad categories of MELs, thus saving electricity and lowering costs. Even though the population of MELs is diverse and rapidly evolving, major technical opportunities exist to improve their efficiency in these functionalities. Research into energy-saving solutions within the cross-cutting technologies will probably have larger savings than focusing on single products.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Efficient and stable perovskite solar cells based on blade-coated CH 3 NH 3 PbI 3 thin films fabricated using “green” solvents under ambient conditions

Metal halide perovskites are considered the most promising candidates for solar cells of the decade due to their exceptional optical and electronic properties. The power conversion efficiency of metal halide perovskites, when incorporated as the active layer of solar cells, has become comparable to that observed for conventional silicon solar cells. However, the stability, scaleup, green solvent usage, and fabrication in ambient conditions of metal halide perovskites need to be solved for commercial applications. Here, in this work, we report the fabrication of blade-coated methylammonium lead iodide (MAPbI 3 ) perovskite thin films using methylamine and acetonitrile as “green” solvents under ambient conditions. Our perovskite films are initially prepared from low purity PbI2 (99%) and are blade-coated in dry air at relative humidity (RH) levels above 30%. A significant advantage of fabricating our perovskite thin films via blade-coating protocols is that there is a minimal amount of precursors (5 μL) used compared to spin-coating methods (50μL–60μL) for a 4 cm 2 substrate. With the addition of a small amount of an organic halide salt, namely, phenethylammonium chloride, the film crystallinity is improved and non-radiative recombination is suppressed, resulting in power conversion efficiencies over 20%. In addition, the device maintains more than 95% of its initial efficiency after 500 h under continuous light illumination of 1-sun at open circuit conditions, 50 °C and 60% RH. The above method leads a path towards the commercial fabrication of perovskite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2025

Nanoscopic cross-grain cation homogenization in perovskite solar cells

Multiscale cation inhomogeneity has been a major hurdle in state-of-the-art formamidinium–caesium (FA–Cs) mixed-cation perovskites for achieving perovskite solar cells with optimal power conversion efficiencies and durability. Although the field has attempted to homogenize the overall distributions of FA–Cs in perovskite films from both plan and cross-sectional views, our understanding of grain-to-grain cation inhomogeneity and ability to tailor it—that is, spatially resolving the FA–Cs compositional difference between individual grains down to the nanoscale—are lacking. Here we reveal that as fundamental building blocks of a perovskite film, individual grains exhibit cationic compositions deviating from the prescribed ideal composition, severely limiting the interfacial optoelectronic properties and perovskite layer durability. This performance-limiting nanoscopic factor is linked to thermodynamic-driven morphological grooving, leading to a segmented surface landscape. At the grain triple junctions, grooves form nanoscale groove traps that hinder the mixing of solid-state cations across grains and thus retard inter-grain FA–Cs mixing. By rationally modulating the heterointerfacial energies, we reduced the depth of these nanoscale groove traps by a factor of three, significantly improving cation homogeneity. Perovskite solar cells with shallower nanoscale groove traps demonstrate enhanced power conversion efficiencies (25.62%) and improved stability under various standardized international protocols. In conclusion, our work highlights the significance of resolving surface nano-morphologies for homogeneous properties of perovskites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

IPL-Annealed Mixed-Cation Perovskites with Robust Coating Window toward Scalable Manufacturing of Commercial Perovskite Solar Cells

Perovskite solar cells (PSCs) are a promising alternative solar technology, but the technical challenges of (1) stability/durability, (2) efficiency at scale, and (3) manufacturability must be overcome to achieve widespread PSC commercialization. The challenge of balancing solution ink formulation and scalable manufacturing is often overlooked in the literature, where focus is on adopting inks from processes that will not scale. In this study, we apply a classical roll-to-roll manufacturing perspective, utilizing both compositional engineering and intense pulsed light (IPL) annealing, to develop a mixed-cation perovskite ink with a robust coating window that simultaneously solve issues of stability and manufacturability for PSCs. Our method resulted in blade-coated, flexible, mixed-cation PSCs on ITO-PET substrates with a champion power conversion efficiency (PCE) efficiency of 16.7% using IPL annealing of the absorber layer and, to our knowledge, is one of the fastest processing methods for the perovskite layer. This overall reduction in processing time with a stable ink represents an advance toward the scaled production of perovskite solar cells on flexible substrates.

flexible perovskite solar cells↗
DOE OSTI2024

Double Perovskite Interlayer Stabilized Highly Efficient Perovskite Solar Cells

Metal halide perovskite solar cell (PSC) technology has an impressive power conversion efficiency (PCE) exceeding 26.1% and demonstrates cost-effective manufacturing. However, the stability of these PSCs poses a significant challenge, hindering their widespread manufacturing and commercialization. To tackle the degradation issue inherent in PSCs, surface passivation techniques, particularly employing a thin layer of two-dimensional (2D) perovskites, create a 2D/3D heterostructure. Beyond this, the exploration of metal halide double perovskites adds a new dimension to the chemical and band gap phase space of materials for optoelectronic applications. In this study, we leverage a wide band gap double perovskite interlayer to enhance the stability of 3D metal halide perovskite. Specifically, the double perovskite nanoparticle Cs 2 AgBiBr 6 , with its substantial band gap of 2.2 eV and exceptional air stability, is utilized. Through optimization, a Cs 2 AgBiBr 6 -treated PSC achieves an open-circuit voltage of 1.12 V and an impressive PCE of 19.52%. Additionally, the Cs 2 AgBiBr 6 passivation layer proves to be effective in bolstering the stability of PSCs. This work demonstrates an additional strategy and design motif to simultaneously increase the PCE of PSCs along with achieving improved stability.

14 SOLAR ENERGY↗
DOE OSTI2023

Characterization of Fe-6Si Soft Magnetic Alloy Produced by Laser-Directed Energy Deposition Additive Manufacturing

Abstract Commercial electrical steels, Fe-Si alloys with < 4 wt.% Si, are inexpensive and efficient materials for electrical power conversion. Further efficiency improvements require increasing the silicon concentration to 6 wt.%, at which point the material becomes brittle and difficult to form by conventional rolling and sheet fabrication methods. Additive manufacturing stands to overcome challenges with commercial manufacturing techniques by leveraging near-net-shape fabrication. The wide array of process conditions provides additive manufacturing with increased flexibility, enabling control over the microstructure and mechanical properties. This work explores the microstructures and magnetic properties of ring-shaped Fe-Si alloys produced using concentric and cross-hatch tool paths on a laser-directed energy deposition additive manufacturing system. Concentric-built samples exhibit elongated grain structures while cross-hatch-built samples comprise lower aspect ratio grain structures. Thermal finite element analysis simulations model the stress conditions produced by the different scan path geometries. Microhardness measurements probe the mechanical properties as a function of anneal temperature, providing a qualitative understanding of the intergranular defect density. Soft magnetic properties measured under quasistatic and AC conditions show frequency- and microstructure-dependent coercivity and permeability. Finally, analysis of the core loss quantifies how the build strategies and thermal treatments influence efficiency in electrical power conversion applications. Understanding the influences of scan path geometry and thermal treatment provides a pathway towards application of additively manufactured soft magnetic materials.

Adamczyk, Jesse M.↗
DOE OSTI2022

Large-Area (Ag,Cu)(In,Ga)Se 2 Thin-Film Solar Cells with Increased Bandgap and Reduced Voltage Losses Realized with Bulk Defect Reduction and Front-Grading of the Absorber Bandgap

The 1.24 eV bandgap, 18.8% power conversion efficiency Ag-alloyed chalcopyrite (Ag,Cu)(In,Ga)Se 2 (ACIGS) solar cells are characterized to relate voltage and efficiency improvements to electro-optical (EO) characteristics. Shockley-Read-Hall recombination center defect density, identified and characterized through deep level transient spectroscopy and time-resolved photoluminescence (TRPL), is reduced through potassium and copper treatment optimization. Concomitantly, longer minority carrier lifetimes are achieved, which increases open-circuit voltage (V OC ). Near-conduction band defects associated in earlier studies with light-induced current instability are also mitigated. Analysis of charge-carrier dynamics after single- and two-photon excitation is used to separate recombination at the front interface and in the absorber bulk. From TRPL decay simulations, the authors estimate ranges of key solar cell material characteristics: bulk carrier lifetime T bulk = 110-210 ns, charge-carrier mobility u = 110-160 cm 2 V -1 s -1 , and front interface recombination velocity S front = 700-1050 cm s -1 . This lowest-reported S front for ACIGS absorbers originates from the notched conduction band grading, which also makes the impact of the back interface recombination negligible. It is suggested in the results that solar cell performance enhancements can be made most readily with two distinct strategies: improving device architecture and reducing semiconductor defect densities. Using these approaches, power conversion efficiency in large-area solar cells is improved by 1.1% absolute.

14 SOLAR ENERGY↗
DOE OSTI2024

1.1 eV GaInAs Cell Development for Dual-Use Solar and 1070 nm Laser Power Converters

Dual-use power converter cells can receive solar and laser power simultaneously to generate current, an application relevant to space and terrestrial industries. This study investigates two concepts of solar cells optimized for dual-use 1070 nm laser and solar power conversion, a single-junction and triple-junction cell. Because it is bandgap-tuned for a 1070 nm laser, the 1.1 eV junction is incorporated into each of the two designs, making its development key to the success of both concepts. Efficiency data for a one junction GaInAs cell demonstrates a laser conversion efficiency of 38% at 1070nm wavelength without an anti-reflection coating. However, the single-junction device requires optimization to reduce short wavelength absorption of the broad solar spectrum. In both devices, the graded buffer layers in the GaInAs cell affects the cell's performance by reducing threading dislocations in the active junction. However, the buffer in the three-junction device also acts as a lateral transport layer and so affects the fill factor depending on its sheet resistance. By varying the buffer thickness, we demonstrate a direct relationship between buffer thickness and sheet resistance reduction, while considering implications to open-circuit voltages. We also performed resistance modeling to determine the optimal grid spacing and thickness of the grid fingers to minimize losses due to sheet resistance and grid shading.

junctions↗
DOE OSTI2021

Regiospecific N -alkyl substitution tunes the molecular packing of high-performance non-fullerene acceptors

The rapid development of non-fullerene acceptors (NFAs) with strong near-infrared absorption has led to remarkably enhanced short-circuit current density (J sc ) values in organic solar cells (OSCs). NFAs based on the benzotriazole (Bz) fused-ring π-core have great potential in delivering both high J sc and decent open-circuit voltage values due to their strong intramolecular charge transfer with reasonably low energy loss. Here in this work, we have designed and synthesized a series of Bz-based NFAs, PN6SBO-4F, AN6SBO-4F and EHN6SEH-4F, via regiospecific N-alkyl engineering based on the high-performance NFA mBzS-4F that was reported previously. The molecular packing of mBzS-4F, AN6SBO-4F, and EHN6SEH-4F single crystals was analyzed using X-ray crystallography in order to provide a comprehensive understanding of the correlation between the molecular structure, the charge-transporting properties, and the solar cell performance. Compared with the typical honeycomb single-crystal structure of Y6 derivatives, these NFAs exhibit distinctly different molecular packing patterns. The strong interactions of terminal indanone groups in mBzS-4F and the J-aggregate-like packing in EHN6SEH-4F lead to the formation of ordered 3D networks in single-crystals with channels for efficient charge transport. Consequently, OSCs based on mBzS-4F and EHN6SEH-4F show efficient photon-to-current conversions, achieving the highest power conversion efficiency of 17.48% with a Jsc of 28.83 mA cm -2 .

36 MATERIALS SCIENCE↗