Search NASA⌕ Search

SEARCH · Search NASA

Results for “Precision relative navigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

A Fuzzy Technique for Performing Lateral-Axis Formation Flight Navigation Using Wingtip Vortices

Close formation flight involving aerodynamic coupling through wingtip vortices shows significant promise to improve the efficiency of cooperative aircraft operations. Impediments to the application of this technology include internship communication required to establish precise relative positioning. This report proposes a method for estimating the lateral relative position between two aircraft in close formation flight through real-time estimates of the aerodynamic effects imparted by the leading airplane on the trailing airplane. A fuzzy algorithm is developed to map combinations of vortex-induced drag and roll effects to relative lateral spacing. The algorithm is refined using self-tuning techniques to provide lateral relative position estimates accurate to 14 in., well within the requirement to maintain significant levels of drag reduction. The fuzzy navigation algorithm is integrated with a leader-follower formation flight autopilot in a two-ship F/A-18 simulation with no intership communication modeled. It is shown that in the absence of measurements from the leading airplane the algorithm provides sufficient estimation of lateral formation spacing for the autopilot to maintain stable formation flight within the vortex. Formation autopilot trim commands are used to estimate vortex effects for the algorithm. The fuzzy algorithm is shown to operate satisfactorily with anticipated levels of input uncertainties.

Hanson, Curtis E.↗
NASA NTRS1986

Global Timing With Low- and High-Orbiting Satellites

Report summarizes method for synchronizing clocks at intercontinental distances employing satellites of Global Positioning System (GPS) in high Earth orbit and transit satellite in orbit at relatively low altitude of about 1,300 km. When fully implemented, method expected to supply precise time measurements for world-wide communication and navigation.

Wu, S. C.↗
NASA NTRS2020

Terrain Relative Navigation for Guided Descent on Titan

Titan’s dense atmosphere, low gravity, and high winds at high altitudes create descent times of >90 minutes with standard entry/descent/landing (EDL) architectures and result in large unguided landing ellipses, with 99% values of 110x110 km and 149x72 km in recent Titan lander proposals. Enabling precision landing on Titan could increase science return for the types of missions proposed to date and make additional types of landing sites accessible, opening up new possibilities for science investigations. Precision landing on Titan has unique challenges, because the hazy atmosphere makes it difficult to see the surface and because it requires guided descent with divert ranges that are one to two orders of magnitude larger than needed for other target bodies, i.e. up to on the order of 100 km. It is conceivable that such a divert capability could be provided economically by a parafoil or other steerable aerodynamic decelerator deployed several 10s of km above the surface. The long descent times lead to large inertial navigation errors, hence a need for terrain relative navigation (TRN). This would require a TRN capability that can operate at such altitudes, despite challenges of seeing the surface sufficiently clearly and of depending on map products that are two orders of magnitude lower in spatial resolution than those for Mars and airless bodies. We then develop algorithms for map matching and feature tracking with descent images and test these with synthetic images created from Cassini/Huygens data sets and our radiative transfer model. We also introduce new possibilities for TRN based on the potential to discriminate some specific types of terrain onboard in descent imagery, such as lake vs adjacent ground and dune vs interdune. We use sensor measurement noise models in simulations of state estimation with an extended Kalman filter that includes coordinates of a set of tracked features in the state vector. Case studies were done for two notional landing sites, one in a site with only dry ground and one in a Titan lake district. In both cases, the filter error model shows 3 position error at touchdown on the order of 2 km. More work is needed to validate these results with higher fidelity camera models and larger data sets, but this is very promising.

Matthies, Larry↗
NASA NTRS2016

GN and C Subsystem Concept for Safe Precision Landing of the Proposed Lunar MARE Robotic Science Mission

The Lunar MARE (Moon Age and Regolith Explorer) Discovery Mission concept targets delivery of a science payload to the lunar surface for sample collection and dating. The mission science is within a 100-meter radius region of smooth lunar maria terrain near Aristarchus crater. The location has several small, sharp craters and rocks that present landing hazards to the spacecraft. For successful delivery of the science payload to the surface, the vehicle Guidance, Navigation and Control (GN&C) subsystem requires safe and precise landing capability, so design infuses the NASA Autonomous precision Landing and Hazard Avoidance Technology (ALHAT) and a gimbaled, throttleable LOX/LCH4 main engine. The ALHAT system implemented for Lunar MARE is a specialization of prototype technologies in work within NASA for the past two decades, including a passive optical Terrain Relative Navigation (TRN) sensor, a Navigation Doppler Lidar (NDL) velocity and range sensor, and a Lidar-based Hazard Detection (HD) sensor. The landing descent profile is from a retrograde orbit over lighted terrain with landing near lunar dawn. The GN&C subsystem with ALHAT capabilities will deliver the science payload to the lunar surface within a 20-meter landing ellipse of the target location and at a site having greater than 99% safety probability, which minimizes risk to safe landing and delivery of the MARE science payload to the intended terrain region.

MARE (Moon Age and Regolith Explorer)↗
NASA NTRS1992

A demonstration of real-time connected element interferometry for spacecraft navigation

Connected element interferometry is a technique of observing a celestial radio source at two spatially separated antennas, and then interfering the received signals to extract the relative phase of the signal at the two antennas. The high precision of the resulting phase delay data type can provide an accurate determination of the angular position of the radio source relative to the baseline vector between the two stations. A connected element interferometer on a 21-km baseline between two antennas at the Deep Space Network's Goldstone, CA tracking complex is developed. Fiber optic links are used to transmit the data at 112 Mbit/sec to a common site for processing. A real-time correlator to process these data in real-time is implemented. The architecture of the system is described, and observational data is presented to characterize the potential performance of such a system. The real-time processing capability offers potential advantages in terms of increased reliability and improved delivery of navigational data for time-critical operations. Angular accuracies of 50-100 nrad are achievable on this baseline.

Edwards, C.↗
NASA NTRS1988

Exponential sensor array geometry and simulation

The polar exponential arrays whose geometric parameters are presently analyzed have proven superior to X-Y raster imaging sensors when wide FOV, high central resolution, and rotation- and zoom-invariance are required; attractive applications for such arrays are in spacecraft docking/tracking/stationkeeping and mobile robot navigation. Attention is given to optimal designs minimizing sensor configuration and computation requirements, and the relation of geometric parameters to the three-dimensional sensing precision requirements driving sensor design. A method for smooth patching of the 'blind-spot' singularity in the sensor with a uniformly high-resolution 'fovea' is also presented.

Weiman, Carl F. R.↗
NASA NTRS2000

A Real Time Differential GPS Tracking System for NASA Sounding Rockets

Sounding rockets are suborbital launch vehicles capable of carrying scientific payloads to several hundred miles in altitude. These missions return a variety of scientific data including: chemical makeup and physical processes taking place in the atmosphere, natural radiation surrounding the Earth, data on the Sun, stars, galaxies and many other phenomena. In addition, sounding rockets provide a reasonably economical means of conducting engineering tests for instruments and devices to be used on satellites and other spacecraft prior to their use in these more expensive missions. Typically around thirty of these rockets are launched each year, from established ranges at Wallops Island, Virginia; Poker Flat Research Range, Alaska; White Sands Missile Range, New Mexico and from a number of ranges outside the United States. Many times launches are conducted from temporary launch ranges in remote parts of the world requiring considerable expense to transport and operate tracking radars. In order to support these missions, an inverse differential GPS system has been developed. The flight system consists of a small, inexpensive receiver, a preamplifier and a wrap-around antenna. A rugged, compact, portable ground station extracts GPS data from the raw payload telemetry stream, performs a real time differential solution and graphically displays the rocket's path relative to a predicted trajectory plot. In addition to generating a real time navigation solution, the system has been used for payload recovery, timing, data timetagging, precise tracking of multiple payloads and slaving of optical tracking systems for over the horizon acquisition. This paper discusses, in detail, the flight and ground hardware, as well as data processing and operational aspects of the system, and provides evidence of the system accuracy.

Bull, Barton↗
NASA NTRS2007

Proceedings of the 20th International Symposium on Space Flight Dynamics

Topics include: Measuring Image Navigation and Registration Performance at the 3-Sigma Level Using Platinum Quality Landmarks; Flight Dynamics Performances of the MetOp A Satellite during the First Months of Operations; Visual Navigation - SARE Mission; Determining a Method of Enabling and Disabling the Integral Torque in the SDO Science and Inertial Mode Controllers; Guaranteeing Pointing Performance of the SDO Sun-Pointing Controllers in Light of Nonlinear Effects; SDO Delta H Mode Design and Analysis; Observing Mode Attitude Controller for the Lunar Reconnaissance Orbiter; Broken-Plane Maneuver Applications for Earth to Mars Trajectories; ExoMars Mission Analysis and Design - Launch, Cruise and Arrival Analyses; Mars Reconnaissance Orbiter Aerobraking Daily Operations and Collision Avoidance; Mars Reconnaissance Orbiter Interplanetary Cruise Navigation; Motion Parameters Determination of the SC and Phobos in the Project Phobos-Grunt; GRAS NRT Precise Orbit Determination: Operational Experience; Orbit Determination of LEO Satellites for a Single Pass through a Radar: Comparison of Methods; Orbit Determination System for Low Earth Orbit Satellites; Precise Orbit Determination for ALOS; Anti-Collision Function Design and Performances of the CNES Formation Flying Experiment on the PRISMA Mission; CNES Approaching Guidance Experiment within FFIORD; Maneuver Recovery Analysis for the Magnetospheric Multiscale Mission; SIMBOL-X: A Formation Flying Mission on HEO for Exploring the Universe; Spaceborne Autonomous and Ground Based Relative Orbit Control for the TerraSAR-X/TanDEM-X Formation; First In-Orbit Experience of TerraSAR-X Flight Dynamics Operations; Automated Target Planning for FUSE Using the SOVA Algorithm; Space Technology 5 Post-Launch Ground Attitude Estimation Experience; Standardizing Navigation Data: A Status Update; and A Study into the Method of Precise Orbit Determination of a HEO Orbiter by GPS and Accelerometer.

Woodard, Mark↗
NASA NTRSDate not supplied

Lunar Navigation Performance Using the Deep Space Network and Alternate Solutions to Support Precision Landing

As human exploration once again targets the surface of the Moon, questions continue to emerge regarding the necessity of Earth-based tracking systems, such as the Deep Space Network, for spacecraft navigation in support of lunar descent and landing. This paper will derive an extensive Deep Space Network sensor model for use in linear covariance analysis and demonstrate the resulting trajectory dispersions and navigation performance in comparison with alternate solutions, such as terrain relative navigation. An in-depth trade study with considerations for various trajectory profiles, time allocated to ground tracking, number of active ground stations, and interaction with other sensors will be conducted to shed significant insight into sensor suite requirements to ensure safe and precise landing on the Moon.

Navigation↗
NASA NTRS2003

Relative Motion of Two Spacecraft Near the Sun-Earth L2 Point

Over the next two decades international space agencies including the National Aeronautics and Space Administration and the European Space Agency are proposing space missions which employ distributed spacecraft technologies to enable vast improvements in remote sensing performance as compared to fundamental performance limitations associated with fairing sizes of even the largest launch vehicles. These missions will require numerous advanced technologies to enable some extreme scientific goals. However, on the critical path to developing many of those technologies, understanding realistic achievable performance, and formulating such missions involving formation flying spacecraft, is the detailed understanding of the vehicle relative motion in the appropriate dynamic environment. Due to the appealing gravitational and thermal environment, the Sun-Earth L(sub 2) point is a strong candidate for placement of many of these missions. Henceforth, this paper begins to unravel the dynamics of relative motion near L(sub 2), with particular consideration given to the ultimate requirements for flying space- craft in precise formation. This work is meant to be a predecessor to detailed formation flying mission analysis efforts in the areas of formation design, formation control, and relative navigation.

Collange, Guillaume↗
NASA NTRS2020

SPLICE Safe and Precise Landing - Integrated Capabilities Evolution

The SPLICE project is developing, maturing, demonstrating, and infusing precision landing and hazard avoidance (PL&HA) technologies for NASA and potential commercial spaceflight missions. Near-term development includes high precision and accuracy velocimetry with ranging (via the NDL), high-resolution real-time mapping and hazard detection with ranging (via the HDL), lunar terrain relative navigation (TRN), and the requisite high performance computing capability. These technologies are initially intended to provide PL&HA for the moon, but are extensible to any planetary body. Long-term, the goal is to make these capabilities available to government and commercial entities and to license technology to commercial entities for production.

Pedrotty, Samuel M.↗
NASA NTRS1996

Machine-Vision Aids for Improved Flight Operations

The development of machine vision based pilot aids to help reduce night approach and landing accidents is explored. The techniques developed are motivated by the desire to use the available information sources for navigation such as the airport lighting layout, attitude sensors and Global Positioning System to derive more precise aircraft position and orientation information. The fact that airport lighting geometry is known and that images of airport lighting can be acquired by the camera, has lead to the synthesis of machine vision based algorithms for runway relative aircraft position and orientation estimation. The main contribution of this research is the synthesis of seven navigation algorithms based on two broad families of solutions. The first family of solution methods consists of techniques that reconstruct the airport lighting layout from the camera image and then estimate the aircraft position components by comparing the reconstructed lighting layout geometry with the known model of the airport lighting layout geometry. The second family of methods comprises techniques that synthesize the image of the airport lighting layout using a camera model and estimate the aircraft position and orientation by comparing this image with the actual image of the airport lighting acquired by the camera. Algorithms 1 through 4 belong to the first family of solutions while Algorithms 5 through 7 belong to the second family of solutions. Algorithms 1 and 2 are parameter optimization methods, Algorithms 3 and 4 are feature correspondence methods and Algorithms 5 through 7 are Kalman filter centered algorithms. Results of computer simulation are presented to demonstrate the performance of all the seven algorithms developed.

Menon, P. K.↗
NASA NTRS2010

Autonomous Precision Landing and Hazard Avoidance Technology (ALHAT) Project Status as of May 2010

This paper includes the current status of NASA s Autonomous precision Landing and Hazard Avoidance Technology (ALHAT) Project. The ALHAT team has completed several flight tests and two major design analysis cycles. These tests and analyses examine terrain relative navigation sensors, hazard detection and avoidance sensors and algorithms, and hazard relative navigation algorithms, and the guidance and navigation system using these ALHAT functions. The next flight test is scheduled for July 2010. The paper contains results from completed flight tests and analysis cycles. ALHAT system status, upcoming tests and analyses is also addressed. The current ALHAT plans as of May 2010 are discussed. Application of the ALHAT system to landing on bodies other than the Moon is included

Striepe, Scott A.↗
NASA NTRS2017

Ground Demonstration on the Autonomous Docking of Two 3U CubeSats Using a Novel Permanent-Magnet Docking Mechanism

Small spacecraft autonomous rendezvous and docking is an essential technology for future space structure assembly missions. A novel magnetic capture and latching mechanism is analyzed that allows for docking of two CubeSats without precise sensors and actuators. The proposed magnetic docking hardware not only provides the means to latch the CubeSats but it also significantly increases the likelihood of successful docking in the presence of relative attitude and position errors. The simplicity of the design allows it to be implemented on many CubeSat rendezvous missions. A CubeSat 3-DOF ground demonstration effort is on-going at NASA Langley Research Center that enables hardware-in-the loop testing of the autonomous approach and docking of a follower CubeSat to an identical leader CubeSat. The test setup consists of a 3 meter by 4 meter granite table and two nearly frictionless air bearing systems that support the two CubeSats. Four cold-gas on-off thrusters are used to translate the follower towards the leader, while a single reaction wheel is used to control the attitude of each CubeSat. An innovative modified pseudo inverse control allocation scheme was developed to address interactions between control effectors. The docking procedure requires relatively high actuator precision, a novel minimal impulse bit mitigation algorithm was developed to minimize the undesirable deadzone effects of the thrusters. Simulation of the ground demonstration shows that the Guidance, Navigation, and Control system along with the docking subsystem leads to successful docking under 3-sigma dispersions for all key system parameters. Extensive simulation and ground testing will provide sufficient confidence that the proposed docking mechanism along with the choosen suite of sensors and actuators will perform successful docking in the space environment.

Pei, Jing↗
NASA NTRSDate not supplied

Validation of Linear Covariance Techniques for Mars Entry, Descent, and Landing Guidance and Navigation Performance Analysis

Current Monte Carlo-based uncertainty analysis methods may require significant computational resources to evaluate the performance of a closed-loop guidance, navigation, and control system. An attractive alternative, particularly during the preliminary and conceptual design phase, is to use linear covariance analysis, which can provide the same statistical information as Monte Carlo methods at a fraction of the computational load. Linear covariance has already been demonstrated in various spaceflight regimes, but only recently has it been applied to atmospheric flight. In this study, a 6-degree-of-freedom formulation of both a linear covariance and Monte Carlo analysis tools are utilized for a Mars entry, descent, and landing scenario which capture both atmospheric and powered flight phases to support precision landing. Comparison of the performance results shows close agreement between the linear covariance and traditional Monte Carlo methods when incorporating an assortment of guidance algorithms and processing a variety of inertial and relative sensor measurements onboard the lander's navigation filter.

James W. Williams↗
NASA NTRS1985

Navigation systems

The elements of the measurement and communications network comprising the global deep space navigation system (DSN) for NASA missions are described. Among the measurement systems discussed are: VLBI, two-way Doppler and range measurements, and optical measurements carried out on board the spacecraft. Processing of navigation measurement is carried out using two modules: an N-body numerical integration of the trajectory (and state transition partial derivatives) based on pre-guessed initial conditions; and partial derivatives of simulated observables corresponding to each actual observation. Calculations of velocity correction parameters is performed by precise modelling of all physical phenomena influencing the observational measurements, including: planetary motions; tracking station locations, gravity field structure, and transmission media effects. Some of the contributions to earth-relative orbit estimate errors for the Doppler/range system on board Voyager are discussed in detail. A line drawing of the DSN navigation system is provided.

Jordan, J. F.↗
NASA NTRSDate not supplied

The LuNaMaps Project: Advancing Capabilities for Developing and Validating Digital Elevation Models of Rocky Surfaces from Orbital Data

Both navigation and surface science can benefit from the ability to generate high resolution and accurate maps of the surface of the Moon and other solar system bodies. The primary way these maps are generated is through the use of orbital imagery and ranging data. Traditionally, the process of using orbital imagery and ranging data is tedious and labor-intensive. Additionally, once maps have been built, there has generally been limited effort in developing standards by which to verify the accuracy and quality of the generated maps. The Lunar Navigation Maps (LuNaMaps) project is a NASA Game Changing Development (GCD) project which over the last 4 years has aimed to address these issues both for the Moon and for other rocky solar system bodies. This has been accomplished through development of new and existing capabilities including: a suite of methods and tools to combine all sources of orbital imagery; a benchmark data set as well as basic requirements for high-fidelity simulations of precision landing functions; tools to synthetically enhance map products with lander-scale features for use in the development and testing of hazard detection systems; methods and tools to evaluate the accuracy of developed digital elevation maps (DEMs) and their quality for use in terrain relative navigation scenarios; and tools to realistically render image and lidar data. In this work, we provide an overview of the capabilities developed through LuNaMaps, demonstrating its use for processing existing lunar data, and describing how it can be applied to other use cases. We additionally provide preliminary results showing the application of the developed tools and processes to the generation of elevation maps of the Lunar Surface Proving Grounds (LSPG) lunar analog at Astrobotic’s Mojave testing facility using “orbital imagery” captured by a drone. In this terrestrial demonstration, we have the benefit of being able to compare the results to a ground truth model of the LSPG. We finally describe plans to use the newly created maps in a terrestrial terrain relative navigation demonstration over the LSPG in early 2025.

optical navigation↗