Search NASA⌕ Search

SEARCH · Search NASA

Results for “Propulsion System Performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Use of Multiple Criteria to Map the High-Temperature Scuffing Behaviorof Co-Based Superalloys

The goal of thisworkwas to rank, as quantitatively as possible, the high-temperature scuffing characteristics of a series of Co-based materials, including coatings, for possible use inwear-critical components like those in diesel engine exhaust systems and emission-controls. A cylinder pivoting on its side against a flat tilewas used as the testing geometry. All testswere performed at 600 C in air. The time-dependent torque response was recorded for each 60 min test to investigate trends in friction as surfaces roughened and debris deposits built up. Candidate materials included Stellite 6B, Pleuco 33 (a white cast iron), nitrided stainless steel Type 310, IDM 5399 (a high-silicon, molybdenum iron), and coatings of both Tribaloy T-400 and Stellite 3 on stainless steel. Measurements of the damaged areas on the scuffed tiles were used to calculate a specific normal load and plot it versus the roughness of the worn tiles to map experimental results in a way that indicated the severity of scuffing for each material combination. Data on the map were annotated to reflect visual observations of the extent of damage as well. Using this test method and the foregoing criteria, nitrided type 310 stainless steel against T-400 gave the best overall performance.

33 ADVANCED PROPULSION SYSTEMS↗

Operating strategy for a hydrogen engine for improved drive-cycle efficiency and emissions behavior.

Due to their advanced state of development and almost immediate availability, hydrogen internal combustion engines could act as a bridging technology toward a wide-spread hydrogen infrastructure. Extensive research, development and steady-state testing of hydrogen internal combustion engines has been conducted to improve efficiency, emissions behavior and performance. This paper summarizes the steady-state test results of the supercharged hydrogen-powered four-cylinder engine operated on an engine dynamometer. Based on these results a shift strategy for optimized fuel economy is established and engine control strategies for various levels of hybridization are being discussed. The strategies are evaluated on the Urban drive cycle, differences in engine behavior are investigated and the estimated fuel economy and NO{sub x} emissions are calculated. Future work will include dynamic testing of these strategies and powertrain configurations as well as individual powertrain components on a vehicle platform, called Mobile Advanced Technology Testbed (MATT), that was developed and built at Argonne National Laboratory.

08 HYDROGEN↗

Propagating Structure Of A Microwave Driven Shock wave Inside A Tube

The thrust generation process of a microwave rocket is similar to a pulse detonation engine, and understanding the interactions between microwave plasma and shock waves is important. Shadowgraph images of the microwave plasma generated in a tube under atmospheric air were taken. The observed plasma and shock wave were propagating one-dimensionally at constant velocity inside the tube. In order to understand the flow field inside the rocket, one-dimensional CFD analysis was conducted. With the change of microwave power density, the structure of the flow field was classified into two regimes: Microwave Supported Combustion (MSC), and Microwave Supported Detonation (MSD). The structure of the MSD was different from the structure of a chemical detonation, which implied the existence of a preheating in front of the shock wave. Furthermore, the flight performance was estimated by calculating the momentum coupling coefficient. It was confirmed that the efficiency was nearly constant in the MSD regime, with the increase of microwave power density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Future Directions of High Fidelity CFD for Aerothermal Turbomachinery Analysis and Design

Computational fluid dynamics is a powerful tool used on a daily basis by designers and researchers in the advancement of propulsion technology. As hardware and software technology continue to evolve, the impact on propulsion systems has the potential to be disruptive. with continued development of High Performance Computing, Large Eddy Simulation, High-Order unstructured grid algorithms, optimization and uncertainty quantification it is conceivable that a new frontier of simulation based research, analysis and design capability is in the foreseeable future. In order to accelerate this development collaboration between industry, academia and government labs is required.

Laskowski, Gregory M.↗

Extending the Concept of Component Interfaces: Experience with the Integrated Plasma Simulator

In the component approach, components are said to interact through well-defined interfaces. Conventionally, these interfaces are based on method signatures which define the syntax, if not the semantics of the interface. However in many cases, this does not encompass all of the interactions a component has with its peers. In the Integrated Plasma Simulator (IPS), a framework for coupled simulation of fusion plasmas developed by the Center for Simulation of RF Wave Interactions with Magnetohydrodynamics (SWIM), we find that components interact through files and through an event service in addition to the usual method calls. In this report, we discuss the motivations for the design of the IPS and our experience with it. We further consider whether the concept of a component interface needs to be extended, and how it might be done. Component-based software engineering (CBSE) has allowed applications to grow in size, scale and power, by coupling components along well-defined interfaces. Many groups have come together to provide rules and standards for component and interface definitions. General purpose component architectures have been designed for business, and scientific computing, while domain specific component frameworks have been created in many domains, including climate modeling, rocket simulation, and engineering. In each architecture, component interfaces, typically implemented as method invocations, are the only ways that are mentioned for components to interact with each other and the outside world. However, components may not always communicate over their interfaces. They can interact with software entities in many other ways including sharing files and publish/subscribe systems. In this paper we consider two ways in which components interact without method invocation in a component framework, how the component interface can be extended to describe these interactions, and the implications on the greater component community. The rest of the paper continues as follows: first we briefly describe the fusion simulation framework that serves as the basis for the discussion (Sec. 2), followed by a description of non-interface interactions (Sec. 3), a discussion of how to extend to the component interface (Sec. 4) and finally some conclusions (Sec. 5).

33 ADVANCED PROPULSION SYSTEMS↗

Combustion chemistry and an evolving transportation fuel environment.

The world currently faces tremendous energy challenges stemming from the need to curb potentially catastrophic anthropogenic climate change. In addition, many nations, including the United States, recognize increasing political and economic risks associated with dependence on uncertain and limited energy sources. For these and other reasons the chemical composition of transportation fuels is changing, both through introduction of nontraditional fossil sources, such as oil sands-derived fuels in the US stream, and through broader exploration of biofuels. At the same time the need for clean and efficient combustion is leading engine research towards advanced low-temperature combustion strategies that are increasingly sensitive to this changing fuel chemistry, particularly in the areas of pollutant formation and autoignition. I will highlight the new demands that advanced engine technologies and evolving fuel composition place on investigations of fundamental reaction chemistry. I will focus on recent progress in measuring product formation in elementary reactions by tunable synchrotron photoionization, on the elucidation of pressure-dependent effects in the reactions of alkyl and substituted alkyl radicals with O{sub 2}, and on new combined efforts in fundamental combustion chemistry and engine performance studies of novel potential biofuels.

33 ADVANCED PROPULSION SYSTEMS↗

Propulsion System Hybridization and Electrification and Energy Recovery of the Hydraulic System for a Diesel-Powered Off-Road Carry/Lift Machine Final Technical Report (FTR)

Historically, heavy-duty off-road equipment has prioritized performance, reliability, and cost, with limited emphasis on efficiency. While increasing carbon dioxide (CO 2 ) regulations have driven a focused effort for efficiency in on-road vehicles, off-road machines have remained largely overlooked, leaving significant opportunities for efficiency improvements and emissions reductions. To address this overlooked industry, Michigan Technological University’s Advanced Power Systems Research Center (APS LABS) worked with Pettibone to determine a unique electrified architecture for Pettibone’s heavy-duty off-road material handler, the Cary-Lift 204i, with a goal of 20% fuel savings. The base Cary-Lift uses a diesel engine with no electrification.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Thermal Management of Power Semiconductor Packages - Matching Cooling Technologies with Packaging Technologies (Presentation)

Heat removal for power semiconductor devices is critical for robust operation. Because there are different packaging options, different thermal management technologies, and a range of applications, there is a need for a methodology to match cooling technologies and package configurations to target applications. To meet this need, a methodology was developed to compare the sensitivity of coolingtechnologies on the overall package thermal performance over a range of power semiconductor packaging configurations. The results provide insight into the trade-offs associated with cooling technologies and package configurations. The approach provides a method for comparing new developments in power semiconductor packages and identifying potential thermal control technologies for the package.The results can help users select the appropriate combination of packaging configuration and cooling technology for the desired application.

30 DIRECT ENERGY CONVERSION↗

Deactivation of Accelerated Engine-Aged and Field-Aged Fe-Zeolite SCR Catalysts

A single-cylinder diesel engine with an emissions control system - diesel oxidation catalyst (DOC), Fe-zeolite selective catalytic reduction (SCR) catalyst, and diesel particulate filter (DPF) - was used to perform accelerated thermal aging of the SCR catalyst. Cyclic aging is performed at SCR inlet temperatures of 650, 750 and 850 degrees C for up to 50 aging cycles. To assess the validity of the implemented accelerated thermal aging protocol, a field-aged SCR catalyst of similar formulation was also evaluated. The monoliths were cut into sections and evaluated for NO{sub x} performance in a bench-flow reactor. While the rear section of both the field-aged and the accelerated engine-aged SCR catalysts maintained high NO{sub x}conversion, 75-80% at 400 degrees C, the front section exhibited a drastic decrease to only 20-35% at 400 degrees C. This two-tiered deactivation was also observed for field-aged samples that were analyzed in this study. To understand the observed performance changes, thorough materials characterization was performed which revealed two primary degradation mechanisms. The first mechanism is a general Fe-zeolite deterioration which led to surface area losses, dealumination of the zeolite, and Fe{sub 2}O{sub 3} crystal growth. This degradation accelerated above 750 degrees C, and the effects were generally more severe in the front of the catalyst. The second deactivation mechanism is linked to trace levels of Pt that are suspected to be volatizing from the DOC and depositing on the front section of the SCR catalyst. Chemical evidence of this can be seen in the high levels of NH{sub 3} oxidation (80% conversion at 400 degrees C), which coincides with the decrease in performance.

33 ADVANCED PROPULSION SYSTEMS↗

Ultra-Light Hybrid Composite Door Design, Manufacturing and Demonstration

New Corporate Average Fuel Economy regulations require improved fuel efficiency of the future vehicle fleet. Weight reduction is key to achieving these targets. Replacing metallic body and chassis components with carbon fiber-reinforced composites offers the most weight reduction potential at up to 70%. Introduction of the BMW i3 and i8 in 2014 required mass production processes to meet 20,000+ units per year. Preforming with High Pressure Resin Transfer Molding has been implemented and meets rate, cost, and performance requirements. We will advance these technologies to develop an ultra-light driver’s side door for the vehicle with production rates of 40,000 units annually per plant in Detroit, Michigan. This project sought to employ a comprehensive systems approach for designing, manufacturing, and demonstrating an ultra-light hybrid composite automotive door. Composite structural components are integrated with other functional systems to reduce part count and full-system weight by a minimum of 42.5%. The approach will be demonstrated on a driver’s- side front door and will consider all fit, functional, safety, and cost requirements. These concepts will be evaluated using structural and crash simulations and linked to a manufacturing feasibility study, resulting in producible designs of an integrated door system. A cost model will evaluate part of the cost for the various designs and will ensure the cost target of less than $5 per pound of weight saved is met. Hybrid composites consisting of carbon, glass, and metal components will be included in our trade-off studies to satisfy these cost and performance goals.

02 PETROLEUM↗

Design and out-of-pile testing of a novel irradiation experiment vehicle to support qualification of nuclear thermal propulsion components

Fission power systems have demonstrated higher thermal energy density per unit mass than chemical systems. High mass specific energy density offers advantages in space thermal propulsion applications. In the 1960s, nuclear thermal propulsion (NTP) development included the ROVER/NERVA program, in which full-scale prototype reactors were tested on the ground using hydrogen as the reactor coolant and propellant. NTP systems are being revisited, with expectations of improved performance resulting from improved fuel materials, allowing propellant temperatures near 2,800 K and over 20 thermal propulsion cycles. An apparatus has been developed to test NTP fuel materials in a research reactor at temperature and in a radiation environment typical of the NTP application. Here, this paper presents the design constraints, preliminary scoping thermal analysis, and basic thermal qualification testing for the out-of-pile experiment set apparatus, or OUTSET.

33 ADVANCED PROPULSION SYSTEMS↗

Evaluating Ultracapacitors for the Saturn Vue Mild Hybrid Platform: Cooperative Research and Development Final Report, CRADA Number CRD-08-00276

Recent analysis conducted by NREL for the USABC and the Electrochemical Energy Storage Technical Team indicated that HEVs utilizing smaller energy windows from the on-board storage system can achieve much of the fuel economy benefit realized by larger energy window HEVs. The simulations showed that nearly all hybridization fuel savings are realized with energy windows of 150 Wh or less.Dynamometer testing of a variety of production HEVs (both mild and full hybrid) has confirmed battery window use less than 200 Wh on standard drive cycles. These findings suggest a cost-saving opportunity from using either smaller batteries or ultracapacitors (which have lower projected long-term costs and superior cold-temperature performance) in order to still achieve a sizeable hybridizationbenefit.

25 ENERGY STORAGE↗

Co-Optimization of Fuels & Engines: Efficiency Merit Function for Spark-Ignition Engines; Revisions and Improvements Based on FY16-17 Research

Early in fiscal year 2016 (FY16), a fuel efficiency 'merit function' was developed to provide a simple tool to evaluate the potential thermal efficiency benefits of various fuels when multiple fuel properties or performance metrics are changing simultaneously. It has also proven to be useful for evaluating various fuel candidates and provides a useful framework for capturing and summarizing results from multiple projects within the Co-Optima Fuel Properties and Advanced Engine Development research portfolios. The objective of this report is to collect pertinent research results from FY16 and the first half of FY17, and to integrate them into an improved merit function.

33 ADVANCED PROPULSION SYSTEMS↗

Model year 2010 Ford Fusion Level-1 testing report.

As a part of the US Department of Energy's Advanced Vehicle Testing Activity (AVTA), a model year 2010 Ford Fusion was procured by eTec (Phoenix, AZ) and sent to ANL's Advanced Powertrain Research Facility for the purposes of vehicle-level testing in support of the Advanced Vehicle Testing Activity. Data was acquired during testing using non-intrusive sensors, vehicle network information, and facilities equipment (emissions and dynamometer). Standard drive cycles, performance cycles, steady-state cycles, and A/C usage cycles were conducted. Much of this data is openly available for download in ANL's Downloadable Dynamometer Database. The major results are shown in this report. Given the benchmark nature of this assessment, the majority of the testing was done over standard regulatory cycles and sought to obtain a general overview of how the vehicle performs. These cycles include the US FTP cycle (Urban) and Highway Fuel Economy Test cycle as well as the US06, a more aggressive supplemental regulatory cycle. Data collection for this testing was kept at a fairly high level and includes emissions and fuel measurements from an exhaust emissions bench, high-voltage and accessory current/voltage from a DC power analyzer, and CAN bus data such as engine speed, engine load, and electric machine operation. The following sections will seek to explain some of the basic operating characteristics of the MY2010 Fusion and provide insight into unique features of its operation and design.

33 ADVANCED PROPULSION SYSTEMS↗

Propulsion Utilizing Laser-Driven Ponderomotive Fields for Deep-Space Missions

The generation of large amplitude electric fields in plasmas by high-power lasers has been studied for several years in the context of high-energy particle acceleration. Fields on the order of GeV/m are generated in the plasma wake of the laser by non-linear ponderomotive forces. The laser fields generate longitudinal and translational electron plasma waves with phase velocities close to the speed of light. These fields and velocities offer the potential to revolutionize spacecraft propulsion, leading to extended deep space robotic probes. Based on these initial calculations, plasma acceleration by means of laser-induced ponderomotive forces appears to offer significant potential for spacecraft propulsion. Relatively high-efficiencies appear possible with proper beam conditioning, resulting in an order of magnitude more thrust than alternative concepts for high I{sub SP} (>10{sup 5} s) and elimination of the primary life-limiting erosion phenomena associated with conventional electric propulsion systems. Ponderomotive propulsion readily lends itself to beamed power which might overcome some of the constraints of power-limited propulsion concepts. A preliminary assessment of the impact of these propulsion systems for several promising configurations on mission architectures has been conducted. Emphasizing interstellar and interstellar-precursor applications, performance and technical requirements are identified for a number of missions. The use of in-situ plasma and gas for propellant is evaluated as well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hyundai Avante LPi hybrid level 1 testing report

In collaboration with the Korea Automotive Technology Institute (KATECH), the Korean market only Hyundai Avante LPi Hybrid was purchased and imported to ANL's Advanced Powertrain Research Facility for vehicle-level testing. Data was acquired during testing using non-intrusive sensors, vehicle network information, and facilities equipment (emissions and dynamometer). Standard drive cycles, performance cycles, steady-state cycles, and A/C usage cycles were conducted. The major results are shown in this report. Given the benchmark nature of this assessment, the majority of the testing was done over standard regulatory cycles and sought to obtain a general overview of how the vehicle performs. These cycles include the US FTP cycle (Urban) and Highway Fuel Economy Test cycle as well as the US06, a more aggressive supplemental regulatory cycle. To assess the impacts of more aggressive driving, the LA92 cycle and a UDDS scaled by a factor 1.2x cycles were also included in the testing plan. Data collection for this testing was kept at a fairly high level and includes emissions and fuel measurements from an exhaust emissions bench, high-voltage and accessory current/voltage from a DC power analyzer, and CAN bus data such as engine speed. The following sections will seek to explain some of the basic operating characteristics of the Avante LPi Hybrid and provide insight into unique features of its operation and design. Figure 1 shows the test vehicle in Argonne's soak room.

33 ADVANCED PROPULSION SYSTEMS↗