Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pt catalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Formation of open ruthenium branched structures with highly exposed active sites for oxygen evolution reaction electrocatalysis

The formation of exposed active sites that have high activity and stability for oxygen evolution reaction (OER) catalysis is a significant opportunity for improving water electrolysers. Low-index facets surface Ru can achieve both high activity and stability for OER. Here, we present a new catalyst design where low-index faceted Ru branches are grown off the corners of Pt nanocubes, forming open Ru branched nanoparticles. This open branched structure, exposing low-index facets on its length-tunable branch, enables a high electrochemically active surface area (ECSA), achieving high activity and stability for OER. This design strategy and synthetic control provide a principle for achieving high-performance OER nanocatalysts.

Xiao, Sa [The University of New South Wales, Sydne↗
DOE OSTI2023

Fabrication of Large-Area Metal-on-Carbon Catalytic Condensers for Programmable Catalysis

Catalytic condensers stabilize charge on either side of a high-k dielectric film to modulate the electronic states of a catalytic layer for the electronic control of surface reactions. Here, carbon sputtering provided for fast, large-scale fabrication of metal–carbon catalytic condensers required for industrial application. Carbon films were sputtered on HfO 2 dielectric/p-type Si with different thicknesses (1, 3, 6, and 10 nm), and the enhancement of conductance and capacitance of carbon films was observed upon increasing the carbon thickness following thermal treatment at 400 °C. After Pt deposition on the carbon films, the Pt catalytic condenser exhibited a high capacitance of ∼210 nF/cm 2 that was maintained at a frequency ∼1000 Hz, satisfying the requirement for a dynamic catalyst to implement catalytic resonance. Temperature-programmed desorption of carbon monoxide yielded CO desorption peaks that shifted in temperature with the varying potential applied to the condenser (−6 or +6 V), indicating a shift in the binding energy of carbon monoxide on the Pt condenser surface. A substantial increase in capacitance (∼2000 nF/cm 2 ) of the Pt-on-carbon devices was observed at elevated temperatures of 400 °C that can modulate ∼10% of charge per metal atom when 10 V potential was applied. A large catalytic condenser of 42 cm 2 area Pt/C/HfO 2 /Si exhibited a high capacitance of 9393 nF with a low leakage current/capacitive current ratio (<0.1), demonstrating the practicality and versatility of the facile, large-scale fabrication method for metal–carbon catalytic condensers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In-operando surface-sensitive probing of electrochemical reactions on nanoparticle electrocatalysts: Spectroscopic characterization of reaction intermediates and elementary steps of oxygen reduction reaction on Pt

In this paper we present an in-operando spectroscopic study of the reaction intermediates involved in ORR on electrified Pt nanoparticle electrocatalysts. To accomplish this, we have synthesized Ag-Pt core–shell nanoparticles, that contain a thin shell of Pt (~1 nm) uniformly deposited on a larger Ag core (~60 nm). We show that these nanostructures are ideal platforms for in-operando Plasmon Enhanced Raman Spectroscopy (PERS) of ORR on Pt. We combined these PERS studies with DFT calculations to assign the measured vibrational spectra to relevant surface intermediates as a function of electrocatalyst potential. Overall, these vibrational assignments were further verified and validated by performing PERS measurements using de-oxygenated and heavy oxygen (O 2 -18) saturated electrolyte. These studies allowed us to identity the presence of critical reaction intermediates (OH, O 2 , OOH, and H 2 O) as the function of operating voltage on the Pt surface and derive voltage-dependent elementary step mechanisms of the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spot the difference: hydrogen adsorption and dissociation on unsupported platinum and platinum-coated transition metal carbides

Hydrogenation reactions are involved in several processes in heterogeneous catalysis. Platinum is the best-known catalyst; however, there are limitations to its practical use. Therefore, it is necessary to explore alternative materials and transition metal carbides (TMCs) have emerged as potential candidates. We explore the possibility of using cheap TMCs as supports for a Pt monolayer, aiming to reduce the amount of the noble metal in the catalyst without a significant loss of its activity towards H 2 dissociation. Hence, analyzing H 2 dissociation from a fundamental point of view is a necessary step towards a further practical catalyst. By means of periodic DFT calculations, we analyze H 2 adsorption and dissociation on Pt/β-Mo 2 C and Pt/α-WC surfaces, as a function of hydrogen surface coverage ( Θ H ), resembling a more realistic model of a catalyst. H 2 dissociation rates were analyzed as a function of the reaction temperature. Overall, the results show that Pt/C-WC and Pt/Mo-Mo 2 C have a Pt-like behavior for H 2 dissociation at Θ H > 1/2 ML. At a particular temperature of 298 K, Pt/C-WC and Pt/Mo-Mo2C have low energy barriers for H 2 * → 2H* (0.13 and 0.11 eV, respectively), close to the value of Pt (0.06 eV). For the highest coverage, i.e. Θ H = 1, Pt/C-WC has a lower activation energy and a higher reaction rate than Pt. Finally, the H 2 dissociation rate is higher in Pt/Mo-Mo 2 C than in Pt when increasing the temperature above 298 K. Our results put Pt/C-WC and Pt/Mo-Mo 2 C under the spotlight as potential catalysts for H 2 dissociation, with a similar performance to Pt, paving the way for further experimental and/or theoretical studies, addressing the capability of Pt/TMC as practical catalysts in hydrogenation reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Rationalization of promoted reverse water gas shift reaction by Pt 3 Ni alloy: Essential contribution from ensemble effect

Bimetallic alloys have attracted considerable attention due to the tunable catalytic activity and selectivity that can be different from those of pure metals. Here, we study the superior catalytic behaviors of the Pt 3 Ni nanowire (NW) over each individual, Pt and Ni NWs during the reverse Water Gas Shift (rWGS) reaction, using density functional theory. The results show that the promoted rWGS activity by Pt3Ni strongly depends on the ensemble effect (a particular arrangement of active sites introduced by alloying), while the contributions from ligand and strain effects, which are of great importance in electrocatalysis, are rather subtle. As a result, a unique Ni–Pt hybrid ensemble is observed at the 110/111 edge of the Pt 3 Ni NW, where the synergy between Ni and Pt sites is active enough to stabilize carbon dioxide on the surface readily for the rWGS reaction but moderate enough to allow for the facile removal of carbon monoxide and hydrogenation of hydroxyl species. Furthermore, our study highlights the importance of the ensemble effect in heterogeneous catalysis of metal alloys, enabling selective binding–tuning and promotion of catalytic activity.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

$\mathscr{PT}$ symmetry enforced twin exchange as the origin of chirality-induced spin selectivity

Chiral molecules, ubiquitous in chemistry and biology, can differentiate electrons by their spin, a phenomenon known as chirality-induced spin selectivity (CISS). Despite its robustness and technological relevance, CISS has resisted conventional explanation: Spin-orbit coupling (SOC) models cannot fully account for the observed magnitude, room-temperature persistence, or equilibrium signatures. Here, we argue that structural chirality enforces a twin-pair exchange mechanism via the indistinguishability principle, which intrinsically couples spin and spatial degrees of freedom such that wave functions cannot be factorized into spin and spatial components. We derive an effective Hamiltonian that describes both transport and equilibrium CISS phenomena and is non-Hermitian. However, the inherent pseudo-Hermiticity, with $\mathscr{PT}$ symmetry as a special case, ensures real eigenvalues and thermodynamic consistency. We demonstrate that our framework is a step toward resolving long-standing anomalies of CISS. It situates CISS alongside equilibrium symmetry-breaking phenomena such as ferromagnetism and superconductivity, with implications for spintronics, catalysis, and the origins of biological homochirality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Accelerating Hydrogen Absorption and Desorption Rates in Palladium Nanocubes with an Ultrathin Surface Modification

Exploiting the high surface-area-to-volume ratio of nanomaterials to store energy in the form of electrochemical alloys is an exceptionally promising route for achieving high-rate energy storage and delivery. Nanoscale palladium hydride is an excellent model system for understanding how nanoscale-specific properties affect the absorption and desorption of energy carrying equivalents. Hydrogen absorption and desorption in shape-controlled Pd nanostructures does not occur uniformly across the entire nanoparticle surface. Instead, hydrogen absorption and desorption proceed selectively through high-activity sites at the corners and edges. Such a mechanism hinders the hydrogen absorption rates and greatly reduces the benefit of nanoscaling the dimensions of the palladium. To solve this, we modify the surface of palladium with an ultrathin platinum shell. This modification nearly removes the barrier for hydrogen absorption (89 kJ/mol without a Pt shell and 1.8 kJ/mol with a Pt shell) and enables diffusion through the entire Pd/Pt surface.

25 ENERGY STORAGE↗
DOE OSTI2022

Adsorbate chemical environment-based machine learning framework for heterogeneous catalysis

Abstract Heterogeneous catalytic reactions are influenced by a subtle interplay of atomic-scale factors, ranging from the catalysts’ local morphology to the presence of high adsorbate coverages. Describing such phenomena via computational models requires generation and analysis of a large space of atomic configurations. To address this challenge, we present Adsorbate Chemical Environment-based Graph Convolution Neural Network (ACE-GCN), a screening workflow that accounts for atomistic configurations comprising diverse adsorbates, binding locations, coordination environments, and substrate morphologies. Using this workflow, we develop catalyst surface models for two illustrative systems: (i) NO adsorbed on a Pt 3 Sn(111) alloy surface, of interest for nitrate electroreduction processes, where high adsorbate coverages combined with low symmetry of the alloy substrate produce a large configurational space, and (ii) OH* adsorbed on a stepped Pt(221) facet, of relevance to the Oxygen Reduction Reaction, where configurational complexity results from the presence of irregular crystal surfaces, high adsorbate coverages, and directionally-dependent adsorbate-adsorbate interactions. In both cases, the ACE-GCN model, trained on a fraction (~10%) of the total DFT-relaxed configurations, successfully describes trends in the relative stabilities of unrelaxed atomic configurations sampled from a large configurational space. This approach is expected to accelerate development of rigorous descriptions of catalyst surfaces under in-situ conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reversible and Selective CO 2 to HCO 2 − Electrocatalysis near the Thermodynamic Potential

Abstract Reversible catalysis is a hallmark of energy‐efficient chemical transformations, but can only be achieved if the changes in free energy of intermediate steps are minimized and the catalytic cycle is devoid of high transition‐state barriers. Using these criteria, we demonstrate reversible CO 2 /HCO 2 − conversion catalyzed by [Pt(depe) 2 ] 2+ (depe=1,2‐ bis (diethylphosphino)ethane). Direct measurement of the free energies associated with each catalytic step correctly predicts a slight bias towards CO 2 reduction. We demonstrate how the experimentally measured free energy of each step directly contributes to the <50 mV overpotential. We also find that for CO 2 reduction, H 2 evolution is negligible and the Faradaic efficiency for HCO 2 − production is nearly quantitative. A free‐energy analysis reveals H 2 evolution is endergonic, providing a thermodynamic basis for highly selective CO 2 reduction.

Cunningham, Drew W.↗
DOE OSTI2024

Zeolite-promoted platinum catalyst for efficient reduction of nitrogen oxides with hydrogen

Internal combustion engine fueled by carbon-free hydrogen (H 2 -ICE) offers a promising alternative for sustainable transportation. Herein, we report a facile and universal strategy through the physical mixing of Pt catalyst with zeolites to significantly improve the catalytic performance in the selective catalytic reduction of nitrogen oxides (NO x ) with H 2 (H 2 -SCR), a process aiming at NO x removal from H 2 -ICE. Via the physical mixing of Pt/TiO 2 with Y zeolite (Pt/TiO 2 + Y), a remarkable enhancement of NO x reduction activity and N 2 selectivity was simultaneously achieved. The incorporation of Y zeolite effectively captured the in-situ generated water, fostering a water-rich environment surrounding the Pt active sites. This environment weakened the NO adsorption while concurrently promoting the H 2 activation, leading to the strikingly elevated H 2 -SCR activity and N 2 selectivity on Pt/TiO 2 + Y catalyst. This study provides a unique, easy and sustainable physical mixing approach to achieve proficient heterogeneous catalysis for environmental applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nanoparticle-Enhanced Plasma Discharge Using Nanosecond High-Voltage Pulses

By discharging nanosecond high-voltage (5 kV) pulses across an insulating substrate containing Au, Pt, or Cu nanoparticles, a 3 order of magnitude (1000×) enhancement in the generation of plasma can be achieved through local field enhancement on the surface of the nanoparticles. The low-temperature nature of this transient plasma is crucial to maintaining the structural integrity of these delicate nanoparticles. These nanoparticles provide up to a 1000-fold enhancement in the generation of the plasma, which is localized to the surface of the nanoparticles where it is potentially useful (e.g., for catalysis). Additionally, we performed both time-domain and frequency-domain calculations of the electromagnetic response of the nanoparticles based on high-resolution transmission electron microscope (HRTEM) images, which show local field enhancement of the nanosecond high-voltage pulse on the order of 3×. Since the plasma initiation depends exponentially on the peak electric field strength, this 3-fold increase in the local electric field can result in a several orders of magnitude increases in the generation of plasma at a given applied external field strength. In order to rule out plasmon-resonance enhancement, which is often associated with small metal nanoparticles, we performed finite difference time domain (FDTD) simulations in the optical frequency domain, which show that the effect of plasmon resonance is negligible for Pt nanoparticles. We therefore attribute the nanoparticle-based enhancement to the generation of plasma (an electrostatic effect) rather than enhanced coupling of light from the near field to the far field via the plasmon resonance phenomenon (an optical effect).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Resonance-Promoted Formic Acid Oxidation via Dynamic Electrocatalytic Modulation

It is a truth universally acknowledged that faster catalysts enable more efficient transformation of molecules to useful products and enhance the utilization of natural resources. However, the limit of static catalyst performance defined by the Sabatier principle has motivated a dynamic approach to catalyst design, whereby catalysts oscillate between varying energetic states. In this work, the concept of dynamic catalytic resonance was experimentally demonstrated via the electrocatalytic oxidation of formic acid over Pt. Oscillation of the electrodynamic potential between 0 and 0.8 V NHE via a square waveform at varying frequency (10 –3 < f < 10 3 Hz) increased the turnover frequency to ~20 s –1 at 100 Hz, over one order of magnitude (20×) faster than optimal potentiostatic conditions. We attribute the accelerated dynamic catalysis to nonfaradaic formic acid dehydration to surface-bound carbon monoxide at low potentials, followed by surface oxidation and desorption to carbon dioxide at high potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct Evidence for Buffer-Enhanced Proton-Coupled Electron Transfer Generation of a High-Valent Metal-Oxo Complex

Here, the oxidation of metal-aquo and -hydroxo complexes to generate the high-valent metal-oxo species used in oxidative catalysis is often kinetically slow due to sluggish proton transfer between ligated −H 2 O/–OH in the proton-coupled electron transfer (PCET) chemistry. In this research, a ruthenium water oxidation catalyst anchored to a conductive tin-doped indium oxide (ITO) thin film, abbreviated ITO|Ru II –OH 2 , was characterized by spectroscopic and electrochemical methods in acetate or phosphate buffers. The deprotonated intermediate, Ru II –OH, was observed spectroscopically in the PCET half-reaction ITO(e – )|Ru III –OH + H + → ITO|Ru II –OH 2 indicating an underlying stepwise ET-PT mechanism. In contrast, at elevated buffer concentrations, this intermediate was absent, and a 2–4 order of magnitude increase in the proton transfer rate constant was observed. Kinetic data for this PCET reaction measured as a function of the driving force provided the reorganization energy λ = 1.05 eV and was assigned to a concerted electron–proton transfer (EPT) mechanism. In addition, the standard heterogeneous rate constants for two PCET equilibria, Ru III –OH + H + + e – ⇌ Ru II –OH 2 and Ru IV = O + H + + e – ⇌ Ru III –OH were enhanced by these same buffers. Collectively, the data show that the added buffers can enhance the kinetics and thermodynamics for PCET reactions relevant to oxidative catalysis.

Catalysts↗
DOE OSTI2019

Gas-Induced Segregation in Pt-Rh Alloy Nanoparticles Observed by In Situ Bragg Coherent Diffraction Imaging

Bimetallic catalysts can undergo segregation or redistribution of the metals driven by oxidizing and reducing environments. Bragg coherent diffraction imaging (BCDI) was used to relate displacement fields to compositional distributions in crystalline Pt-Rh alloy nanoparticles. Three-dimensional images of internal composition showed that the radial distribution of compositions reverses partially between the surface shell and the core when gas flow changes between O 2 and H 2 . Our observation suggests that the elemental segregation of nanoparticle catalysts should be highly active during heterogeneous catalysis and can be a controlling factor in synthesis of electrocatalysts. Additionally, our study exemplifies applications of BCDI for in situ 3D imaging of internal equilibrium compositions in other bimetallic alloy nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Migration and aggregation of Pt atoms on metal oxide-supported ceria nanodomes control reverse water gas shift reaction activity

Abstract Single-atom catalysts (SACs) are particularly sensitive to external conditions, complicating the identification of catalytically active species and active sites under in situ or operando conditions. We developed a methodology for tracing the structural evolution of SACs to nanoparticles, identifying the active species and their link to the catalytic activity for the reverse water gas shift (RWGS) reaction. The new method is illustrated by studying structure-activity relationships in two materials containing Pt SACs on ceria nanodomes, supported on either ceria or titania. These materials exhibited distinctly different activities for CO production. Multimodal operando characterization attributed the enhanced activity of the titania-supported catalysts at temperatures below 320 ˚C to the formation of unique Pt sites at the ceria-titania interface capable of forming Pt nanoparticles, the active species for the RWGS reaction. Migration of Pt nanoparticles to titania support was found to be responsible for the deactivation of titania-supported catalysts at elevated temperatures. Tracking the migration of Pt atoms provides a new opportunity to investigate the activation and deactivation of Pt SACs for the RWGS reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Stabilization of Ultrasmall Platinum Nanoparticles by Nitrogen-Doped Carbon: Implications for Catalysis and Electrocatalysis

Heterogeneous materials comprising platinum nanoparticles on carbon supports have numerous applications including fuel cell electrodes and heterogeneous catalysts. The effective application of these materials for fuel cells and catalysis will be greatly advanced by the ability to control the oxidation and sintering of the nanoparticles by modifications of the carbon support. One attempt of such control has been doping carbon supports with nitrogen. Here, in this work, a cutting-edge, high-sensitivity, in situ XRD instrument, which allows observation of ultrasmall Pt nanoparticles, has been combined with in situ XPS to provide unprecedented clarity in the characterization of supported Pt nanoparticles in oxidizing and high-temperature environments. On a nitrogen-doped carbon support derived from poly-phenylporphyrin, Pt nanoparticles show increased stability to oxidation and thermal sintering. The enhanced Pt–support interaction arising from the N dopant versus the N-free carbon is manifested by (1) decreased initial Pt particle sizes, (2) small particle size at higher surface densities, (3) increased resistance of Pt nanoparticles to oxidation, (4) increased electron binding energy of Pt0, and (5) increased resistance of Pt nanoparticles to sintering. It is expected that the higher stability of Pt on NC will be manifested in higher activity in fuel cells and high-temperature catalytic reactions.

catalytic reactions↗
DOE OSTI2022

Python Group Additivity (pGrAdd) software for estimating species thermochemical properties

ncreasingly complex chemistry models require thermochemical data for many species often estimated from costly first-principles DFT computations. Here we introduce the Python Group Additivity software (pGrAdd) that implements comprehensive group additivity in a simple, modular, lightweight Python package that is extensible and easy to implement. It includes 6 group additivity databases for gas species and Pt(111) adsorbates allowing users to immediately compute thermochemical properties for a wide range of molecules and build new databases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

A general flame aerosol route to high-entropy nanoceramics

High-entropy ceramics are an emerging class of materials with fascinating characteristics. However, elemental immiscibility and crystal complexity limit the development of a general synthesis strategy, and common methods yield bulk materials. Here, we introduce a transformative non-equilibrium flame aerosol technique for synthesizing high-entropy nanoceramics. This scalable, one-step process enables the production of high-entropy oxide nanoceramics with an unprecedented diversity of crystal structures, including fluorite-phase materials that integrate up to 22 distinct cation elements. The method’s capacity for entropic stabilization and grain refinement significantly improves the thermal stability of these nanostructures. In a representative application, a Pt-(MgCoNiCuZn)O high-entropy single-atom catalyst showed superior activity and long-term stability, maintaining constant CO 2 conversion over 670 h and dramatically outperforming conventional catalysts. Finally, the general approach opens a vast composition and structure space for the creation of high-entropy oxide nanomaterials for application across diverse fields, including catalysis, energy storage, sensing, and thermal management.

36 MATERIALS SCIENCE↗