Search NASA⌕ Search

SEARCH · Search NASA

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

New Examination of the Raman Lidar Technique for Water Vapor and Aerosols: Evaluating the Temperature Dependent Lidar Equations - Paper 1

The intent of this paper and its companion is to compile together the essential information required for the analysis of Raman lidar water vapor and aerosol data acquired using a single laser wavelength. In this first paper several details concerning the evaluation of the lidar equation when measuring Raman scattering are considered. These details include the influence of the temperature dependence of both pure rotational and vibrational-rotational Raman scattering on the lidar profile. These are evaluated for the first time using a new form of the lidar equation. The results indicate that, for the range of temperatures encountered in the troposphere, the magnitude of the temperature dependent effect can reach 10% or more for narrowband Raman water vapor measurements. Also the calculation of atmospheric transmission is examined carefully including the effects of depolarization. Different formulations of Rayleigh cross section determination commonly used in the lidar field are compared revealing differences up to 5% among the formulations. The influence of multiple scattering on the measurement of aerosol extinction using the Raman lidar technique is considered as are several photon pulse-pileup correction techniques.

Whiteman, David N.↗
NASA NTRS1994

Raman-Augmented Stratospheric-Ozone Lidar

Differential-absorption lidar (DIAL) system measures concentration of ozone in stratosphere augmented with subsystem measuring Raman scattering from nitrogen. One of number of DIAL systems used in long-term monitoring of stratospheric ozone. Raman scattering from nitrogen provides data to correct for effects of aerosols. Channels at wavelengths of 332 and 385 nm added to DIAL receiver to measure Raman backscattering from nitrogen molecules in stratosphere. Data-acquisition electronics sample photon counts at a rate of 250 MHz.

Mcdermid, I. Stuart↗
DOE OSTI2025

Real-Time Detection of Hydrogen and Ammonia Isotopologues for Impurity Removal and Recovery of Tritium

To accommodate gas measurements for impurity removal and recovery of tritium, a silver-coated optical or waveguide is employed for collecting Raman scattered signals to determine relative hydrogen and ammonia isotopologue populations in real time. The data and results presented here demonstrate an analytical methodology for the analysis of four ammonia and three hydrogen isotopologues in a hydrogen–deuterium exchange reaction by gas phase Raman spectroscopy. Standard chemometric modeling techniques effectively unravel the signatures of the isotopologues involved observed here; however, a sophisticated quantum chemical approach supports the spectral assignments. An interpretation of the data presented here can emphasize the practicality and reliability of the gaseous monitoring system in complex chemical environments for the hydrogen fuel economy as well as the more distant energy source from a facility that handles tritium. There are still considerable concerns about the measurement of tritium in isotope separation and radiological impurities from gas processing. A common impurity in gas processing is ammonia, which can form readily in the presence of nitrogen and tritium. Substituted ammonia (NQ 3 ), where Q = H, D, or T, is traditionally removed through getters or diffusers along with other non-hydrogen contaminants. A preferable analytical approach is noninvasive and can be deployed for real-time process evaluation in radiological environments.

Ammonia↗
NASA NTRS1993

Rayleigh rejection filters for 193-nm ArF laser Raman spectroscopy

Selected organic absorbers and their solvents are evaluated as spectral filters for the rejection of 193-nm Rayleigh light associated with the use of an ArF excimer laser for Raman spectroscopy. A simply constructed filter cell filled with 0.5 percent acetone in water and an optical path of 7 mm is shown effectively to eliminate stray Rayleigh light underlying the Raman spectrum from air while transmitting 60 percent of the Raman light scattered by O2.

Mckenzie, Robert L.↗
DOE OSTI2025

Damage buildup in multilayer hexagonal boron nitride films under Ar ion bombardment

Ion irradiation can be used to modify properties of two-dimensional hexagonal boron nitride (2D-hBN). However, the behavior of multilayer 2D-hBN under ion bombardment remains essentially unexplored. Here, in this study, we systematically study the damage buildup in 40-nm-thick multilayer 2D-hBN films irradiated at room temperature with 500 keV Ar ions with doses up to 0.64 displacements per atom. Transmission electron microscopy, soft X-ray absorption spectroscopy, and Raman spectroscopy are employed to study effects of ion irradiation. Results reveal a monotonic buildup of damage that can be described by the phenomenological zero cascade overlap model. Compared to the behavior of other group-III nitride semiconductors, radiation damage in hBN is influenced by polymorphism, involving transitions between bonding configurations of hexagonal, cubic, and amorphous phases.

Seo, M. [Lawrence Livermore National Laboratory (L↗
DOE OSTI2025

Photocarrier dynamics at the interface between WS 2 and ozone-irradiated graphene

We investigate the photocarrier properties of heterostructures (HSs) formed by WS 2 and ozone-irradiated graphene (OI-graphene), with a focus on the impact of ozone irradiation. Photoluminescence and Raman spectroscopy reveal a pronounced doping effect induced by ozone irradiation on the graphene layer. Transient absorption measurements demonstrate a substantial suppression of charge transfer efficiency across the interface in the presence of ozone molecules. Spatially resolved pump-probe measurements further show a significant reduction in the diffusion coefficient of photocarriers in WS 2 on OI-graphene compared to that of individual WS 2 monolayers. The slower diffusion suggests enhanced spatial separation of electrons and holes in the WS 2 layer, induced by a built-in electric field at the interface. This effect arises from the combined influences of doping and dielectric property changes caused by ozone molecules. These findings highlight the critical influence of ozone irradiation on graphene and HS interfaces, offering valuable insights for the design of future graphene-based two-dimensional HSs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1983

Coupling of radiation into thin film modes by means of localized plasma resonances

The interaction between the surface plasmon mode that propagates at a metal dielectric interface and the localized plasma resonances (LPR) is investigated experimentally in Ag-island films. A stair-stepped sample geometry comprising a glass substrate, a continuous 50-nm Ag film, an LiF spacer film of thickness d = 5-60 nm, and an Ag-island film of mass thickness 3 nm is used in near-normal-reflectivity and plasmon-propagation-constant (k) determinations. The results are presented graphically and discussed. The overall shape of the reflectivity curves is found to be characteristic of Ag films, but with a dip at about 400 nm (corresponding to the absorption resonance of the island film) which is most pronounced with d = 25 nm. It is inferred that the island resonances are strongly coupled to a continuous-film dissipative mechanism at this d value. This inference is supported by the fact that the variation in k, correctd for LiF effects and plotted as a function of d, is greatest at around d = 25 nm. The implications of this finding for broad-band coupling into a thin-film mode, LPR enhancement of waveguide nonlinear effects, and new surface-enhanced-Raman-scattering geometries are indicated.

Holland, W. R.↗
NASA NTRS1996

The Amplitude Nth-Power Squeezing of Radiation Fields in the Degenerate Raman Process

In this paper we study the amplitude Nth-power squeezing of radiation fields in the degenerate Raman process by using the modified effective Hamiltonian approach recently suggested by us. We found that if the field is initially in a coherent state it will not get squeezing for any Nth-power; if the field is initially in a squeezed vacuum, it may get Nth-power squeezing. The time evolution of the field fluctuation was discussed. Its dependences on power-order N, mean photon number bar-n, and squeezing angle xi are analyzed.

Zhang, Zhi-Ming↗
NASA NTRS1996

Contributions of the SSBUV Experiment to Long-Term Ozone Monitoring

The SSBUV experiment flew eight Space Shuttle missions from October 1989 to January 1996 in conducted eight missions between October 1989 and support of the US long-term ozone monitoring program. Contributions of the SSBUV experiment are reviewed in this paper. SSBUV data are being used to provide and validate the absolute and long-term calibrations of multiple satellite-based ozone monitoring instruments. SSBUV observed a significant decrease in Northern hemisphere total ozone from the winter of 1992 to the following winter, and SSBUV data were combined with Nimbus-7 data to assess long-term ozone changes during the 1980's. SSBUV solar irradiance measurements are being used to determine the absolute solar spectral irradiance in the middle UV, validate solar data from two UARS instruments, and independently measure long-term solar change at wavelengths important for ozone photochemistry. SSBUV data where also used to study the effects of surface reflectivity and rotational Raman scattering on the ozone retrievals, determine the NO column amount and its altitude distribution, measure the UV lunar albedo, and assist in the optimization of wavelengths for new instruments.

Hilsenrath, E.↗
NASA NTRS1981

The current status of airborne laser fluorosensing

Airborne laser fluorosensors have been used to identify and quantify specific substances in the aquatic environment. It has been shown that the sensor can identify and classify oil films. If the extinction coefficient is known then the thickness of thinner films (less than 20 micrometers) may be calculated. The intensity of the water Raman signal is proportional to the water volume sampled by the sensor and hence an effective attenuation coefficient for the water can be calculated. The same Raman measurement provides the normalization necessary to map chlorophyll and dye concentrations using the intensity of their respective fluorescence signatures.

Oneil, R. A.↗
NASA NTRS2004

Raman Microscopic Characterization of Proton-Irradiated Polycrystalline Diamond Films

The microstructural effects of irradiating polycrystalline diamond films with proton dosages ranging from 10(exp 15) to 10(exp 17) H(+) per square centimeter was examined. Scanning Electron Microscopy and Raman microscopy were used to examine the changes in the diamond crystalline lattice as a function of depth. Results indicate that the diamond lattice is retained, even at maximum irradiation levels.

Newton, R. L.↗
NASA NTRS2003

Fe-Ti-Cr-Oxides in Martian Meteorite EETA79001 Studied by Point-counting Procedure Using Raman Spectroscopy

Fe-Ti-Cr-Oxide minerals contain much information about rock petrogenesis and alteration. Among the most important in the petrology of common intrusive and extrusive rocks are those of the FeO-TiO2-Cr2O3 compositional system chromite, ulv spinel-magnetite, and ilmenite-hematite. These minerals retain memories of oxygen fugacity. Their exsolution into companion mineral pairs give constraints on formation temperature and cooling rate. Laser Raman spectroscopy is anticipated to be a powerful technique for characterization of materials on the surface of Mars. A Mars Microbeam Raman Spectrometer (MMRS) is under development. It combines a micro sized laser beam and an automatic point-counting mechanism, and so can detect minor minerals or weak Raman-scattering phases such as Fe- Ti-Cr-oxides in mixtures (rocks & soils), and provide information on grain size and mineral mode. Most Fe-Ti-Cr-oxides produce weaker Raman signals than those from oxyanionic minerals, e.g. carbonates, sulfates, phosphates, and silicates, partly because most of them are intrinsically weaker Raman scatters, and partly because their dark colors limit the penetration depth of the excitation laser beam (visible wavelength) and of the Raman radiation produced. The purpose of this study is to show how well the Fe-Ti-Cr-oxides can be characterized by on-surface planetary exploration using Raman spectroscopy. We studied the basic Raman features of common examples of these minerals using well-characterized individual mineral grains. The knowledge gained was then used to study the Fe-Ti-Cr-oxides in Martian meteorite EETA79001, especially effects of compositional and structural variations on their Raman features.

Wang, Alian↗
DOE OSTI2024

Evaluation of a frequency-dependent phase shift in chirped Raman lasers for atom gravimeters

Light-pulse atom gravimetry has emerged as a powerful technique for precisely measuring absolute gravitational acceleration. Raman lasers are commonly used in this technique to coherently manipulate the atomic wave packet, of which the effective frequency is chirped continuously to compensate for the Doppler shift. In this study we investigate an additional phase shift in the Raman lasers that arises due to the frequency chirp. Here, we directly measure this phase shift by recording the beat signal of the Raman lasers with a high-speed oscilloscope, providing an independent evaluation of the resultant error in atom gravimeters caused by this phase shift. Concurrently, we detect the influence of the additional phase shift on gravity measurements using our atom gravimeter, and the results are in good agreement with the independent evaluation. Notably, there may still be a residual error at the microgal level when performing differential measurements by reversing the direction of the effective wave vector of the Raman lasers. We propose that this residual error can in principle be eliminated by selecting the same chirp frequency range for both directions in the differential measurement.

Xu, Yaoyao [Huazhong Univ. of Science and Technolo↗
DOE OSTI2026

Effects of high-dose neutron irradiation at light-water reactor relevant temperature on the mechanical properties of SiC/SiC composites

For this study, the neutron dose-dependent evolutions and the underlying mechanisms of properties of SiC fiber-reinforced SiC matrix (SiC/SiC) composites at a temperature relevant to light-water reactors (∼600 K) were investigated and analyzed. Chemical vapor infiltrated (CVI) SiC/SiC composites reinforced with Hi-Nicalon Type S or Tyranno SA3 fiber were neutron-irradiated to doses up to 30 dpa. The irradiated composites retained their flexural strengths. The thermal diffusivity and dimensional changes were mostly retained from 2.0 to 30.2 dpa. Discrepancies in irradiation responses among CVI SiC/SiC composites from different sources were found. Additional microstructural analysis using Raman spectroscopy and numerical analysis on irradiation effect on residual stress were used to explain how the microstructural variables, especially of carbon interphases, affect the mechanical properties in the 30–40 dpa dose range.

Continuous fiber-reinforced ceramic matrix composi↗
NASA NTRSDate not supplied

Characterization of NU-LHT-4M Lunar Regolith Simulant Using Different Raman Configurations

As much as possible, structures to help sustain a long-term human presence on the moon will be constructed via in-situ resource utilization (ISRU) from lunar regolith. Various processes have been proposed to make lunar regolith-based construction materials, but one complication is that the lunar regolith is relatively complex in terms of composition and can vary quite significantly from one site to another. Some of these methods to make lunar regolith-based construction materials are quite sensitive to the composition and so in-situ methods for evaluating the composition of the lunar regolith could be critical. Various analytical instrumentation has been proposed for in-situ characterization of the composition of regolith on planetary bodies. Raman spectroscopy has been suggested and has some advantages over other in-situ techniques, such as potential for relatively high spatial resolution, direct determination of the mineralogy (while other methods may only infer the mineralogy), nondestructive analysis, relatively simple instrument configurations, and minimal sample preparation/handling. For example, Raman instrumentation has already been deployed in rover-based missions to Mars. Previously, we developed the Standoff Ultracompact Micro-Raman Sensor (SUCR), which is a portable Raman spectroscopy instrument capable to be integrated into a rover or onto a lander. Here, we present work on Raman spectroscopy measurements of NU-LHT-4M lunar simulant using three different Raman instruments with different configurations for collecting Raman data with the goal to explore the effect of these different configurations on the results, especially for use in a lunar environment.

Raman Spectroscopy↗
NASA NTRS1973

Raman scattering applied to gas mixing in the successive channel flow of two gases

The Raman scattering technique has been applied to investigate the effects of fluid undercutting in a simulation of the fluid-piston concept for wind-tunnel design. Measurements of the structure of the driver-driven gas interface and of the effect of undercutting on test duration were performed. Tests were conducted over a Froude number range of 0.0021 to 0.526 at driver-to-driven gas density ratios of 1.103 and 1.573. The effects of inlet design, test-channel inclination angle, and pretest pressurization were also examined. The results are compared with shadowgraph and pressure measurements to illustrate the characteristics of the Raman technique and to explain the discrepancy between the shadowgraph and pressure results.

Hillard, M. E., Jr.↗
NASA NTRS1993

Thermal processing of omicron-terphenyl - A Raman study

Raman spectra from omicron-terphenyl sealed in glass capillary tubes were acquired over temperatures ranging from 233 to 343 K. Over this temperature range, omicron-terphenyl can exist in the solid-crystalline, molten, supercooled-liquid, and amorphous-glassy states. Representative structure-sensitive spectra are presented along with a qualitative description. The lattice spectral feature occurring at a Raman shift of 123/cm displays abrupt changes in profile and intensity as melting and glass transition occur. The intensity ratio of the C-C stretching 996/cm line and C-H stretching line at 1008/cm displays a change related to the transformation of the ordered-crystalline phase to the disordered-liquid or glassy state. At a Raman shift of 1162/cm the solid-crystalline state shows a splitting due to the effect of the crystal field. The possibility of using these structure-sensitive Raman characteristics for in situ diagnostics during materials processing is discussed.

Biswas, A.↗