Results for “RESEARCH EQUIPMENT” — Page 6

DOE OSTI2026

Measurements of TRACER pre-convective conditions and mesoscale circulations using small unmanned aircraft systems (sUAS)

Improved comprehension of the physical processes governing convective cloud formation and lifecycle are of critical importance for understanding and predicting future climate states. The influence of these clouds on the planetary energy budget, including on precipitation, is significant. Things are particularly complex in coastal regimes, where gradients in aerosol particle properties, localized circulations such as sea breezes, and large population centers are found. To date, numerical models struggle to accurately represent these critical clouds and are therefore challenged to provide a realistic view on the planetary energy budget. Through the proposed research, we deployed two uncrewed aircraft systems (UAS) equipped with a variety of instruments alongside sensors deployed by the US Department of Energy Atmospheric Radiation Measurement (ARM) program for the TRACER (Tracking Aerosol Convection Interactions Experiment) field campaign. The two small UAS platforms consisted of a CU RAAVEN fixed-wing airplane and an OU CopterSonde system, with the copter collecting frequent vertical profiles of thermodynamic and kinematic variables such as temperature, pressure, wind and humidity. At the same time, the fixed-wing captured horizontal gradients of these quantities and aerosol size distribution. These systems were deployed south of the Houston metro area, in an area that is impacted by the Gulf of Mexico sea breeze on a daily basis. These observations offer enhanced and complementary perspectives to those provided by the DOE ARM Mobile Facility (AMF) which is was deployed in southeast Houston, and an ancillary site in a more rural location west of the urban Houston area. Quality-controlled versions of the UAS data were collected and posted on the DOE ARM data archive after the conclusion of the campaign where they are accessible by the research community and general public. The UAS perspective offers revolutionary insight into key spatial and temporal effects that have not been evaluated previously.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Mitigation of Beam Losses in LANSCE Linear Accelerator

Suppression of beam losses is essential for successful operation of high-intensity accelerator facility. The LANSCE accelerator started routine operation in 1972 as a 0.8 MW average proton beam power facility for meson physics research, and delivered highpower beam for a quarter century. The accelerator currently delivers 100 MeV proton beam to Isotope Production Facility (IPF) and 800 MeV H- beams to various experimental areas. The accelerator is equipped with two independent injectors for H + and H - beams, merging at the entrance of a 201.25 MHz Drift Tube Linac (DTL). The DTL performs acceleration up to the energy of 100 MeV. After the DTL, the Transition Region beamline directs a 100 MeV proton beam to the Isotope Production Facility, while the H - beam is accelerated up to the final energy of 800 MeV in an 805- MHz Coupled Cavity Linac. The H - beams, created with different time structure by a lowenergy chopper, are distributed in the Switch Yard (SY) to four experimental areas: the Lujan Neutron Scattering Center equipped with a Proton Storage Ring (PSR), the Weapons Neutron Research facility (WNR), the Proton Radiography facility (pRad), and the Ultra-Cold Neutron facility (UCN). Multi-beam operation requires careful control of accelerator tune to minimize beam losses. In this paper we review main effects affecting beam losses in LANSCE linear accelerator and discuss methods to reduce them.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Development and Experimental Optimization of High-Temperature Modeling Tools and Methods for Concentrated Solar Power Particle - Systems

A novel, open-source radiative modeling toolset was developed to extend the functionality of particle-based modeling software (e.g. discrete element method (DEM)) to environmental conditions relevant to concentrated solar power applications. This toolset was optimized for deployment on desktop workstations instead of high-performance computing systems, to render such tools more accessible to the research community. Both particle-based modeling and radiative exchange modeling are computationally expensive and often require specialized programming expertise, making these methods cumbersome to use. Recent developments in DEM software by DCS Computing have greatly reduced these challenges, providing a graphical-user-interface based platform and modeling optimization for desktop workstations, HPCs, and cloud computing. The University of Dayton leveraged the experience of DCS Computing in developing a user-friendly, open-source radiative heat transfer expansion for DEM modeling. The University of Dayton DEM+ radiative modeling toolset was developed using a combination of fundamental experimental measurements, modeling, and simplified flow experiments over a range of temperatures and flow conditions. The toolset provides researchers with access to multiple radiative models including an accelerated Monte-Carlo Ray Tracing (application agnostic, highly computationally expensive), an expanded database of distance-based approximations (application limited, computationally light), and a weighted blending of the two methods capable of achieving over 90% reduction in computation time with equivalent accuracy compared to Monte-Carlo Ray Tracing. Through a graphical user interface, users can customize the radiative models to match their desired accuracy and available computational resources, improving access to particle based modeling for the research community. Ceramic sintered bauxite proppants were used in modeling and experimentally as a baseline. Both the radiative heat transfer and flow properties for particulate systems were investigated at elevated temperatures up to 800 °C. The major accomplishments for this work include a verified, open-source radiative modeling toolset to be distributed amongst the research community and the fabrication of three small-scale test facilities to investigate particle behavior and tune DEM flow properties for operation up to 800 °C. The findings have been shared with the research community via conference modeling workshops, deployment of the tools in DCS Computing Aspherix®, and open-source access to the developed radiative modeling tool. The development of next-generation CSP facilities and thermal energy storage systems based on ceramic particles requires providing access to computationally efficient and accurate modeling tools. Particles will experience a wide range of environments (20-800 °C) and handling conditions (dilute curtains or dense packing), requiring specially designed and optimized equipment. Optimizing solid particle physics models and establishing best-practices for particle modeling in CSP environments will assist researchers with designing optimized equipment, accelerating the deployment of more economically-competitive CSP facilities.

14 SOLAR ENERGY↗

DOE OSTI2026

Evaluating the efficiency of touch-spun scaffolds in producing dense cell cultures for tissue engineering applications

Developing efficient scaffolds for long-term cell cultivation remains a challenge in tissue engineering. Biomimetic approaches aim to create a three-dimensional (3D) extracellular matrix (ECM)-like fiber network with a tunable hierarchical structure to promote sufficient cell attachment, differentiation, and overall viability. Among the fiber fabrication methods documented in the literature, mechanical fiber drawing techniques, such as touch-spinning, have garnered significant research interest. This is due to the simplicity of the equipment, the ability to control fiber diameter and interfiber spacing at the nanoscale without the need for external fields, and the absence of specific requirements for material dielectric properties. Despite the advantages of mechanically drawn scaffolds in biomedical research, the methodologies for cell culturing and analysis for these materials have not been adequately addressed. In this study, we assess the potential of touch-spun scaffolds in promoting NIH/3T3-GFP fibroblast cell growth for tissue engineering applications. Polycaprolactone/polyethylene oxide (PCL/PEO)-based fiber arrays with a controlled interfiber spacing of 91.9 ± 25.0 μm (N = 50) were fabricated using a modified touch-spinning apparatus and then assembled into 2D and 3D scaffolds through additive manufacturing technology. A comparative cell analysis conducted for single- and multi-layered structures showed that the 3D touch-spun scaffolds support healthy growth of up to 6.5 million fibroblast cells within 21 days and offer enhanced cell viability compared to conventional 2D fiber scaffolds, as confirmed by the Presto Blue assay. Furthermore, the metabolic activity of fibroblasts on 3D scaffolds assessed by the MTT test is approximately four times higher than that of the positive control, making the 3D touch-spun materials ideal for long-term cell culture applications.

Peranidze, Kristina [University of Georgia, Athens↗

DOE OSTI2020

Dragonstone Strategy – State of Cybersecurity in the Oil & Natural Gas Sector

The oil & natural gas (ONG) system touches every corner of the nation and increased communications & control capabilities have not only allowed for greater efficiency of system operation, but have also created a massive target for adversaries to launch cyber-attacks. Like any other heavy industrial process, the ONG system relies on a complex system of information technology (IT) and operational technology (OT) devices. The current state of cyber-preparedness across the ONG industry varies from organization to organization. Among the most common challenges that ONG companies face are remote locations, longlived field assets, and lacking capabilities to find and track malware on their systems. ONG companies tend to be concerned with lack of cyber-awareness from employees, risk stemming from remote access for operations & maintenance, and software vulnerabilities within third-party equipment. Various industry and government organizations are performing research and development activities to address some of these challenges, but in many cases industry stakeholders are not aware of solutions that already exist. It is clear that a need exists for a coherent, comprehensive, multi-layered strategy for assuring the security and resilience of the nation's pipeline infrastructure against cyber threats. For a variety of reasons, the general consensus from stakeholders interviewed by LLNL is that the state of cyber-security within the electric grid is currently outpacing its ONG cousin. Existing strategies for the resilience and cyber-security of the electric grid can and should be leveraged to provide immediate benefits to the ONG system. In LLNL’s view, there are two key factors currently limiting the development of necessary cyber-practices within the ONG industry: The sheer number of differing regulatory bodies and trade groups offering both standards and best-practice recommendations for ONG cyber-security makes it difficult to create a comprehensive, directed, and coherent strategy that is applicable to all players within the ONG industry. The ONG industry is unaware of potentially useful technologies that have been developed for ensuring cyber-security of other infrastructure systems, such as the electric grid. Leveraging these technologies—and the science and engineering behind them—can provide some low-hanging fruit that can greatly improve cyber-security in the ONG industry without significant investments in terms of time and money. In the months following this report, LLNL will continue to perform outreach to key oil & gas industry stakeholders in a continual effort to identify the most pressing cyber-resilience issues in the industry. This outreach will be supplemented with LLNL’s threat intelligence capabilities to begin painting a clearer picture of the overall threat landscape faced by this sector. This assessment will be threat-informed and while the strategy itself will not be classified we will leverage intelligence analysis and adversary capabilities to identify gaps in current cybersecurity practices for oil & gas pipeline systems. Recommended efforts will be compiled into a cyber-resilience roadmap for the oil & gas pipeline sector, in which LLNL will highlight priority activities to immediately improve the state of cyber-resilience in the industry.

02 PETROLEUM↗

DOE OSTI2021

Section 110 Documentation of a Douglas AD-2 Skyraider Crash Site, Area 1, Nevada National Security Site, Nye County, Nevada

The National Nuclear Security Administration, Nevada Field Office has undertaken a Section 110 current condition assessment of the unanticipated discovery of an aviation crash site in Nye County, Nevada. Because no undertaking is planned, an area of potential effect (APE) was not defined. A study area of 0.55 acres was established to delineate the general extent of the debris scatter and establish a boundary for the cultural resource documentation of the site by Desert Research Institute (DRI). The Douglas AD-2 Skyraider drone crash site (26NY17011) is recommended eligible for the National Register of Historic Places (NRHP) under Significance Criterion A, as a physical remnant of Project 5.1 “Atomic Weapons Effects on AD Type Aircraft in Flight,” one of the series of military effects studies conducted as part of Shot Simon during Operation Upshot-Knothole in 1953. Furthermore, the site is eligible under Criterion D because closer examination of the debris could address research questions concerning the Type 1 Remote Control Equipment developed by the Naval Air Experimental Station that was onboard to remotely pilot the aircraft.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

5G Energy FRAME: The Design and Implementation of Data, Model, and Use Case (Year 2 Report)

This report summarizes the Year 2 work of Pacific Northwest National Laboratory’s (PNNL’s) 5G Fabricated Resource and Asset Management Encompassment for energy infrastructure (Energy FRAME) project funded by the Department of Energy Office of Science’s Advanced Scientific Computing Research (ASCR) Program. In this report, newest 5G equipment testing results are presented, along with two 5G-enabled AI/ML examples for grid applications; in addition, the work flow of grid edge, cloud, and High Performance Computing (HPC) platform is introduced, to support and interface the cross-domain simulation for power system transmission, distribution, and communication networks. Last but not least, the outlook for Year 3 work and the overarching impact of 5G Energy FRAME work to a multitude of stakeholders are provided. Additional 5G performance data now is shared through the publicly available weblink, https://www.pnnl.gov/projects/5g-energy-frame/publications

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Distributed Wind Monitoring Best Practices

Accessible performance and operational data have been identified as a key enabler for distributed wind energy industry advancement. While utility-scale wind turbines benefit from reliable and continuous supervisory control and data acquisition (SCADA)-based monitoring platforms, monitoring of the U.S. fleet of distributed wind (DW) turbines has been more inconsistent, unreliable, and sometime difficult to access. Without fleet monitoring data, the industry will never understand and thus work to improve turbine under-performance and reliability issues. For the DW industry to scale up, attract investors, and boost credibility, fleetwide monitoring must be robust and reliable, select data must be made accessible to stakeholders, and the data must be in a format useful to users. To help move the industry toward a more standardized, accessible stream of monitoring data, this distributed wind monitoring best practices report attempts to cover topics including key monitoring channels, hardware, communication strategies, and accessibility. Strategic engagement with DW original equipment manufacturers (OEMs), service providers, lab and university researchers, testing organization, certification bodies, end users and solar photovoltaic (PV) monitoring experts has enabled a better understanding of the current state-of-the-art of monitoring and aided in articulating this set of best practices that will guide OEMs toward harmonized monitoring strategies, aimed at a future goal of achieving accessible performance and operational data for the entire fleet of U.S. distributed wind turbines.

17 WIND ENERGY↗

DOE OSTI2025

Center for Wind Energy

The purpose was to establish the physical infrastructure and additional measurement equipment for a center focused on wind energy research, education, technology development and community outreach. The Center is located on the Richardson campus of UTD. The Center for Wind Energy will bring together university, civic and industry partners to create and test new technologies to realize the potential of wind to support the energy needs of the nation.

17 WIND ENERGY↗

DOE OSTI2020

Characterizing Ocean Acidification and Atmospheric Emission caused by Methane Released from Gas Hydrate Systems along the US Atlantic Margin (Final Report)

To assess the environmental impact of decomposing gas hydrates, this project characterized the atmospheric emission and ocean acidification associated with seafloor-released methane along the U.S. Atlantic Margin. This project leveraged the newly discovered seafloor seeps in this region, many of which are located near the landward limit of gas hydrate stability, to investigate the fate and environmental impact of methane once released from the seafloor. Several research directions were pursued during these investigations. First, high-spatial resolution surface surveys were conducted to characterize the degree to which sea-to-air emission of methane is correlated with acoustically detected seafloor bubble emissions. Second, the natural isotopic signatures of both radiocarbon and δ 13 C were measured throughout the water column to observe if seafloor-released methane was detected in surface waters or if it was replaced by a different source. Third, the extent of methane oxidation in the water column was constrained to assess the ability of this process to mitigate atmospheric methane emissions. Fourth, since aerobic methane oxidation ultimately converts methane to carbon dioxide, the extent of ocean acidification relating to this process was assessed. Ultimately, this project was conducted in four stages. Stage one involved preparations for the research expedition along the U.S. Atlantic Margin. This involved calibrating, modifying, and validating equipment needed for sample and data collection in this unique environment. Stage two involved executing the at-sea science. This research was conducted from 25 August to 5 September 2017 on the R/V Hugh R. Sharp. This expedition left from Lewes, Delaware and investigated the continental slope from approximately this latitude down to Cape Hatteras, North Carolina. Third, any samples unanalyzed on the research vessel were returned to the laboratory and measured. Fourth, the data were interpreted, and publications and presentations were prepared.

03 NATURAL GAS↗

DOE OSTI2020

Bioprocessing Separations Consortium Three-Year Overview: Technical Advances, Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

09 BIOMASS FUELS↗

DOE OSTI2020

Bioprocessing Separations Consortium Three-Year Overview: Technical Advances Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Bioprocessing Separations Consortium: Three-Year Overview - Technical Advances, Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

09 BIOMASS FUELS↗

DOE OSTI2023

Verification of a Modeling Toolkit for the Design of Building Electrical Distribution Systems

DC electrical distribution systems offer many potential advantages over their AC counterparts. They can facilitate easier integration with distributed energy resources, improve system energy efficiency by eliminating AC/DC converters at end-use devices (e.g., laptop chargers), and reduce installation material, time, and cost. However, DC electrical distribution systems present additional design considerations, largely resulting from potentially greater magnitude and variation in cable losses. Modeling and simulation are rarely used to design such systems. However, the greater dependency of DC system energy efficiency on design choices such as distribution voltages, architecture, and integration of PV and BESS suggests that modeling and simulation may be required. Such system performance analysis is currently not a standard practice, in part due to limited availability and validation of capable software tools. This paper characterizes the accuracy of a Modelica-based Building Electrical Efficiency Analysis Model (BEEAM) toolkit, as a precursor for validating its use to perform system performance analysis and inform design decisions. The study builds upon previous verification research by characterizing complete systems comprised of commercially available equipment, and providing a more detailed analysis of simulation results. Five lighting systems with varying electrical distribution architectures were designed using market-available equipment, installed in a laboratory environment, modeled using BEEAM, and simulated using three Modelica integrated development environments (IDEs). Simulated and measured results were compared to characterize toolkit accuracy. Initial results revealed that simulated performance was mostly within ±5% of measured system-level and device-level performance. While simulation results were not found to be dependent on the IDE, some Modelica compiler interoperability issues were identified. Although the BEEAM toolkit showed promise for the targeted use case, further work is needed to determine whether the demonstrated 5% accuracy is sufficient for making real-world design decisions, and for BEEAM to advance from an interesting research tool to one that can impact real-world building projects.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Modernizing the Legacy Fission Wire Measurement System for the Advanced Test Reactor-Critical Facility

Operational lifetime extensions of existing research reactors have emphasized the need for refurbishment, replacements, and upgrades to supporting equipment and instrumentation. The Advanced Test Reactor (ATR) at Idaho National Laboratory (INL), which entered service in 1967, has recently completed the sixth core internals change-out and has scheduled operations until at least 2040. Reactor maintenance and operational risk management is critically important in the research reactor community, however supporting measurement systems sometimes get overlooked when maintenance is planned. The Fission Wire Measurement System (FWMS) is a custom measurement system designed in the 1960s to measure the beta-particle activity of irradiated uranium-aluminum fission wires. This measurement is conducted to determine the fission rate profile of the Advanced Reactor Test Critical (ATR-C) facility. The ATR-C is an open-pool, low-power test reactor that was purpose driven to resemble ATR and is used to qualify experiment configurations and verify core models prior to full-power experiment irradiations in ATR. A power distribution measurement in ATR-C uses uranium-aluminum wires that are distributed throughout the ATR-C core to validate simulation and modeling results. These measurements require 340 to 1500 wires to be irradiated and measured within a 12-hour window. The activity of the wires is measured in the required time with the FWMS, which was put into service in 1965 at the Radiation Measurements Laboratory (RML). The system consists of 4 measurement channels and one reference channel, each with a 2-pi proportional gas flow detector and the measurement channels each have an automated sample changer. This legacy system is crucial to the continued operations of ATR and has undergone some minor hardware upgrades since 1965, however the system presently relies on custom control boards, custom gas ion chambers, analog amplifiers/discriminators, and a user interface (UI) for the system written in outdated code. Much of the equipment and software is custom with no commercial replacements or support and limited documentation. The existing control software requires an operating system that is no longer supported, creating more vulnerabilities to continued operations. A project is underway with a third-party vendor to design, build, and document a new control and data acquisition system (CDAS) for the FWMS. The new upgrade will replace the control system, computer, UI, sample changer motors, and main power supply while maintaining the interface with existing detector hardware. The upgraded system will be operated in parallel with the current hardware and software to conduct validation testing. This equipment upgrade demonstrates the commitment at ATR to ensuring successful operations and potential future research reactors at INL.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

DOE OSTI2023

Performance, Combustion and Emissions Evaluation of Liquid Phase Port-Injected LPG on a Single Cylinder Heavy-Duty Spark Ignited Engine

Liquefied petroleum gas (LPG), like many other alternative fuels, has witnessed increased adoption in the last decade, and its use is projected to rise as stricter emissions regulations continue to be applied. However, much of its use is limited to dual fuel applications, gaseous phase injection, light-duty passenger vehicle applications, or scenarios that require conversion from gasoline engines. Therefore, to address these limitations and discover the most efficient means of harnessing its full potential, more research is required in the development of optimized fuel injection equipment for liquid port and direct injection, along with the implementation of advanced combustion strategies that will improve its thermal efficiency to the levels of conventional fuels. This paper focuses on the development of a liquid phase port-injection system for LPG, the design of a reference piston, and the baseline evaluation of the performance, combustion, and emissions characteristics of a single cylinder research engine to establish a benchmark comparable to existing LPG engines. A sweep of start of injection (SOI) timing is performed by injecting liquid LPG at several closed and open intake valve timings, which demonstrates no significant variation in engine performance, but accounts for a 10% reduction in bsCO with the optimal SOI timing. Spark timing sweep demonstrates the 50% burn crank angle location related to maximum brake torque (MBT) point with a brake thermal efficiency (BTE) of ~34% for the tested load case. The effect of equivalence ratio is also presented with optimal SOI timing at MBT condition. The engine starts exhibiting knocking combustion at 140kPa intake manifold air pressure (IMAP) with a peak torque of 253Nm and a 5% reduction in brake specific fuel consumption compared to the naturally aspirated scenario.

Fosudo, Toluwalase↗

DOE OSTI2021

Noise Level Hazards due to Agricultural Equipment in a Laboratory

Noise exposure is a common health hazard in the agricultural field due to the continuous use of large pieces of equipment. In lab settings it is not as common to noise exposure due to industrial scale equipment. However, the energy system laboratories at INL are exploring new and inventive ways to create energy from biomaterials. This process requires the use of large pieces of agricultural equipment such as hammer mills, shakers, conveyor belts, etc. As the researchers continuously refine this process, they not only test the limits of renewable resources for energy but also test the noise exposure threshold limits. The purpose of this project was to determine the noise level hazards which are present due to the use of large agricultural equipment in a laboratory setting.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2020

University of Wisconsin-Madison Campus-Wide Deep Dive

In June 2019, staff members from the Engagement and Performance Operations Center (EPOC) and the University of Wisconsin–Madison Division of Information Technology (UW DoIT) met with researchers for the purpose of a Campus-Wide Deep Dive. The goal of this meeting was to help characterize the requirements for a number of research and educational activities, and to enable cyberinfrastructure support staff to better understand the needs of researchers. Material for this event includes both the written documentation from nine projects, and the campus technology organization, but also a writeup of the discussion that took place in person. The Case Studies highlighted the ongoing challenges that the University of Wisconsin–Madison will face in the coming years to support, encourage, and grow several emerging and established use cases. The University of Wisconsin–Madison received an NSF award to help support upgrading the campus network in 2012, specifically to include a Science DMZ and monitoring equipment. However, there is a currently identified need to refresh equipment and identify and work more closely with current campus researchers. Updates to the state network, as well as the campus, are being planned and were discussed during this event. As part of the overall review, the necessity of working more closely with research teams as they are still in the planning phase was discussed so that DoIT can better understand and adapt to changes in requirements as the research demands grow over time . Additional challenges with securing sensitive data, cybersecurity, and supporting collaborations were also discussed.

97 MATHEMATICS AND COMPUTING↗