Search NASA⌕ Search

SEARCH · Search NASA

Results for “RILL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Horizontal transport of the regolith, modification of features, and erosion rates on the lunar surface

Impact-ejecta systematics are developed for the smaller cratering events which, with cumulative crater populations observed in young mare regions and on Copernicus ejecta fields, yield rates and a range distribution for the horizontal transport of material by impact processes. The deposition rate for material originating more than 1 m away is found to be about 8 mm per million years. Material from 10 km away accumulates at a rate of about 0.08 mm per million years, providing a steady influx of foreign material. From the degradation of boulder tracks, a rate of 5 plus or minus 3 cm per million years is computed for the filling of shallow lunar depressions on slopes. Mass wastage and downslope movement of bedrock outcroppings on Hadley Rille seem to be proceeding at a rate of about 8 mm per million years. The Camelot profile is suggestive of a secondary impact feature.

Arvidson, R.↗
NASA NTRS1975

Geologic structure of shallow maria

Isopach maps and structural contour maps of the eastern mare basins (30 deg N to 30 deg S; 0 deg to 100 deg E), constructed from measurements of partially buried craters, are presented and discussed. The data, which are sufficiently scattered to yield gross thickness variations, are restricted to shallow maria with less than 1500-2000 m of mare basalts. The average thickness of basalt in the irregular maria is between 200 and 400 m. Correlations between surface topography, basalt thickness, and basin floor structure are apparent in most of the basins that were studied. The mare surface is commonly depressed in regions of thick mare basalts; mare ridges are typically located in regions of pronounced thickness changes; and arcuate mare rilles are confined to thin mare basalts. Most surface structures are attributed to shallow stresses developed within the mare basalts during consolidation and volume reduction.

Dehon, R. A.↗
NASA NTRS1977

Viking Observations of Phobos and Deimos: Preliminary Results

The improved resolution of the Viking images has led to the discovery of a number of unusual surface features on Phobos. The features include elongated rill-like depressions associated with the crater Stickney, chains and clusters of irregular elongated craters, and linear striations or grooves. Crater counts are also considered. A total of 27 craters ranging in size from 0.3 to 1.4 km are visible on the best Deimos frame available. Craters ranging from 50 m to 4.9 km in diameter can be observed on the best of the Phobos images.

Veverka, J.↗
NASA NTRS1978

Correlation of dark mantle deposits with high Mg/Al ratios

The Mg/Al concentration ratios from the orbital fluorescence X-ray experiment were used to characterize dark mantle deposits on the moon. The areas studied included the regions of Sulpicius Gallus, Taurus-Littrow, Hadley Rille, Mare Crisium (craters Picard and Pierce), and NE Mare Fecunditatis. In all these cases these deposits exhibit high Mg/Al ratios which suggest the presence of orange, black, and green pyroclastic glasses. The highest concentration of glasses was inferred in the Sulpicius Gallus Formation at about 35%. The depth of the initial pyroclastic deposits was estimated at 3 to 4 meters. Central Mare Serenitatis exhibits high Mg/Al values but does not possess dark mantle deposits. Orbital Al and Mg/Al data for this region is similar to the very low titanium mare basalts.

Schonfeld, E.↗
NASA NTRS1978

Mare volcanism in the Herigonius region of the moon

The paper considers the area in the vicinity of the crater Herigonius. This area contains numerous sinuous rilles, craters with irregular planimetric form, possible pyroclastic cones, and other features of probable volcanic origin, and appears to be the vent region that supplied lavas both northward to Oceanus Procellarum and southward to the Humorum basin. The approach used involves photogeologic interpretation of surface features and mapping of mare units to derive a regional stratigraphic sequence. The sequence of mare volcanism provides insight into the complex emplacement of lunar lavas and the general volcanic history of the moon.

Greeley, R.↗
NASA NTRS1979

Constraints on the origins of lunar magnetism from electron reflection measurements of surface magnetic fields

The paper describes a new method of detecting lunar surface magnetic fields, summarizes electron reflection measurements and correlations of surface field anomalies to moon geologic features, and discusses the constraints on the origin of lunar magnetism. Apollo 15 and 16 measurements of lunar surface magnetic fields by the electron reflection method show patches of strong surface fields distributed over the lunar surface, and a positive statistical correlation is found in lunar mare regions between the surface field strength and the geologic age of the surface. However, there is a lack of correlation of surface field with impact craters indicating that the mare does not have a strong large-scale uniform magnetization as may be expected from an ancient lunar dynamo. Fields were found in lunar highlands which imply that the rille has a strong magnetization associated with it as intrusive, magnetized rock or as a gap in a uniformly magnetic layer of rock.

Lin, R. P.↗
NASA NTRS1979

Elastic lithosphere thickness on the moon from mare tectonic features - A formal inversion

The thickness (T) of the lunar elastic lithosphere at the time (3.6 to 3.8 billion years ago) of the earliest preserved basalt flows in circular mare basins can be estimated by inverting the observed locations of extensional tectonic features in and surrounding the maria. In performing the inversion, the lithosphere is modeled as an elastic shell with a liquid interior, and the basalt load for each mare is approximated by a set of concentric cylinders. To permit solving the forward problem of placing radial limits on the positions of the rilles around a given mare, an additional parameter F, the ratio of the radial stress at the radial limits to the maximum radial stress, is introduced. T and F are chosen to give the best weighted-squares fit of the radial limits to the observations, and are used as the initial values in a linearized matrix inversion to check the resolution and estimate errors. The application of the procedure to three maria with prominent extensional features, Humorum, Orientale, and Serenitatis, gives values of T from about 40 + or - 10 to 50 + or - 10 km, and in each case the linearized matrix equation has an exact inverse.

Comer, R. P.↗
NASA NTRS1979

Charting the southern seas - The evolution of the lunar Mare Australe

Mare Australe has been subjected to at least four major episodes of basalt eruption ranging in age from early Imbrian to Eratosthenian. The basalts were emplaced largely in flood eruptions from at least 197 vents located on post-basin impact crater floors. The youngest basalts occur in an annulus near the outer edge of the basin. The fill thickness apparently reflects a multiring structure for the post-impact morphology of the Australe basin; the thin basaltic fill was not sufficient a load to produce tectonic rilles, but mare ridges are present and exhibit a prominent north-south alignment.

Whitford-Stark, J. L.↗
NASA NTRS1982

The Apollo 15 regolith - Comparative petrology of drive tube 15010/15011 and drill core section 15003

Two Apollo 15 regolith cores - double drive-tube 15010/15011 and deep drill core section 15003 - were compared. The drive tube was taken from near the edge of Hadley Rille within the mare region and the drill core was taken from the landing site, approximately the same distance as the drive tube from the Apennine Front. Optical modes were done on the two cores, each of which was divided into three stratigraphic units defined by minor differences in grain size and modal abundances. Electron microprobe data were collected on the mineral and glass fragments within each unit. Fused-soil-free bulk chemistries were calculated for each unit by modal recombination, using our modal data and average compositional and density data for soil components. It is found that the drive tube and drill core section are fairly homogeneous units both chemically and modally. Both soils are submature to immature. There are, however, significant differences between the cores. The drill core shows significant enrichments of highland lithic-fragments and highland-derived minerals and glasses relative to the drive tube. These differences are attributed to the fresh nature of the drive tube soil whose major source material is mare basalt ejecta from the shallow bedrock.

Walker, R. J.↗
NASA NTRS1982

The Apollo 15 regolith - Chemical modeling and mare/highland mixing

The chemical compositions of thirty-one A-15 soils from nine sampling stations were studied. Mixing models were calculated using five components: 'representative A-15 mare basalt', anorthosite, low-K Fra Mauro basalt, green glass, and medium-K KREEP (Laul and Papike, 1980). A linear-least-squares mixing model (Boynton et al., 1975) was used with sum check and chi-square tests of the fit of components to soil composition. The soils show significant compositional variability, in some instances over relatively small distances within a sampling station. The models indicate that green-glass abundance does not vary systematically with location and that a significant KREEP component is found in all Apennine Front soils. The models also show the soils from the rim of Hadley Rille to be the most mare-enriched, and soils from Station 2 to be the most highland-enriched. The regolith from Station 8-LM is anomalously high in KREEP component relative to the other mare soils, possibly because of ray material.

Walker, R. J.↗
NASA NTRS1984

Volcanism in Elysium Planitia, Mars

Geomorphic mapping revealed that the three volcanic constructs within Elysium Planitia (Hecates Tholus, elysium Mons and Albor Tholus) are very different in their overall morphology and represent three distinct types of martian volcano. Hecates Tholus was found to possess the most likely possible example of a young, explosively generated, air fall deposit, while the volume of magma erupted from Elysium Mons appears to have been orders of magnitude larger than that erupted from Albor Tholus. A primary aim of the regional geological analysis of Elysium Planitia is to further understand the volcanic and tectonic evolution of the area by the identification and interpretation of individual lava flows and their source vents. Lava flow size, spatial distribution, flow direction and the stratigraphic relationships of these lava flows to adjacent structural features were all measured. The topographic form of Elysium Mons has totally controlled the flow direction of lava flows within Elysium Planitia. Lava flows from Elysium Mons can be traced for distances of 150 to 250 km in a radial direction from the volcano. Parasitic vents located beyond the recognizable volcanic construct also conform to this radial pattern. A second unusual characteristic of the Elysium Planitia region is the high frequency of occurrence of sinuous channels that are morphologically similar to lunar sinuous rilles.

Mouginis-Mark, P. J.↗
NASA NTRS1985

Selection of the Apollo 15 landing site

Telescopic studies in the early 1960's pinpointed the future Apollo 15 landing site as a potential exploration site because it included one of the largest lunar sinuous rilles, Rima Hadley, and some of the highest mountains, Montes Apenninus. Additional targets were identified once Apennine-Hadley emerged as a potential landing site. Site selection processes were discussed.

Wilhelms, D. E.↗
NASA NTRS1987

Eruptive history of the Elysium Volcanic Province of Mars

New geologic mapping of the Elysium volcanic province at 1:2,000,000 scale and crater counts provide a basis for describing its overall eruptive history. Four stages are listed and described in order of their relative age. They are also distinguished by eruption style and location. Stage 1: Central volcanism at Hecates and Albor Tholi. Stage 2: Shield and complex volcanism at Elysium Mons and Elysium Fossae. Stage 3: Rille volcanism at Elysium Fossae and Utopia Planitia. Stage 4: Flood lava and pyroclastic eruptions at Hecates Tholus and Elysium Mons. Tectonic and channeling activity in the Elysium region is intimately associated with volcanism. Recent work indicates that isostatic uplift of Tharsis, loading by Elysium Mons, and flexural uplift of the Elysium rise produced the stresses responsible for the fracturing and wrinkle-ridge formation in the region. Coeval faulting and channel formation almost certainly occurred in the pertinent areas in Stages 2 to 4. Older faults east of the lava flows and channels on Hecates Tholus may be coeval with Stage 1.

Tanaka, Kenneth L.↗
NASA NTRS1991

Finding and utilizing lunar lava tubes

Horz describes the evidence for lava tubes associated with rills in lunar photoimaging. These tubes have terrestrial counterparts as described by Billings, et al., and Gillet. The widths of these tubes range from 10s to 100s of meters. Their roof thickness are at least 0.125 to 0.25 times their widths and stand unsupported on the Moon. To confine one atmosphere of internal pressure, static roof thickness must be at least 16 m. Favorable locations of lava tubes may be surveyed using roving gravity meters on Doodle Bugs, which consist of platforms containing equipment for communication with Earth-based control stations. The stable -20 C temperature of the lava tubes should provide a workable habitat environment. The greater than 16 m of basalt in the roof should give adequate radiation and impact protection. Typically, after clearing entries and grading ramps, habitats might be placed in tubes and inflated. Later, larger habitats might be built by enclosing tube sections with compacted-regolith dams. The interior can then be sealed to hold an atmosphere. The huge lava tubes inferred from the photographs are capable of providing habitats hundreds of meters wide, in lengths of kilometers.

Kuck, David L.↗
NASA NTRS1991

Lunar western limb pyroclastic deposits

It has become increasingly evident that the lunar pyroclastic volcanism played an important role in the formation and resurfacing of many areas of the Moon. On-going analysis of lunar Orbiter and Apollo photographs continues to locate and identify pyroclastic deposits and suggests that they just may be more ubiquitous than once thought. Located near mare/highland boundaries, many of these deposits formed contemporaneously with effusive mare volcanism. The mantling deposits formed as products of fire-fountaining. Probable source vents for these deposits include irregular depressions at the head of associated sinuous rilles and/or along irregular fractures in the floors of ancient craters. Here, researchers provide a brief synopsis of the nature of the dark mantling deposits and briefly discuss several newly identified deposits on the western limb.

Coombs, Cassandra R.↗
NASA NTRS1992

Lunar mare volcanism - Stratigraphy, eruption conditions, and the evolution of secondary crusts

Recent developments in the geological analysis of lunar mare volcanism are reviewed. Analysis of returned samples and photogeological and remote sensing studies shows that mare volcanism began prior to the end of heavy bombardment (the period of cryptomare formation), in pre-Nectarian times, and continued until the Copernical Period, the total duration approaching 3.5-4 Ga. Stratigraphic analysis shows that the flux was not constant, but peaked in early lunar history, during the Imbrian Period. Average volcanic output rate during this period was about 0.01 cu cm/a. Volcanic landforms indicate that many eruptions were of high volume and long duration. Some eruptions associated with sinuous rills may have lasted a year and emplaced 1000 cu km of lava, representing the equivalent in one year of about 70,000 yr at the average flux. The occurrence of farside maria within craters whose diameter is generally near to or less than the thickness of the crust may be accounted for by the difference between local and regional compensation.

Head, James W., III↗
NASA NTRS1992

Channels and valleys on Venus - Preliminary analysis of Magellan data

A preliminary survey of Magellan imagery reveals more than 200 newly discovered relic channel and valley landform complexes. For purposes of discussion the channels can be classed as simple, complex, and compound. Integrated valleys also occur. Simple channels include: (1) sinuous rilles that closely resemble their lunar counterparts and (2) a newly recognized long sinuous form of high width-to-depth ratio and remarkably constant width. Herein designated canali, the most spectacular of these channels is 6800 km long. One of the compound channels, an outflow complex in Lada Terra, extends over 1200 km and is up to 30 km wide. Streamlined hills and spill relationships at a cross-axial ridge are similar to features in flood channels. Venusian channels have a global distribution with most of the large canali-type channels developed on volcanic plains. Alternative hypotheses for the channel-forming processes include genesis by the following erosive fluids: ultramafic silicate melts, sulfur, and carbonate lavas. Each of these causative agents has profound implications for Venusian planetology. The remote possibility of an aqueous origin, indicated by apparent regime behavior of the active channeling process, cannot be excluded with absolute certainty.

Baker, V. R.↗
NASA NTRS1992

Igneous and tectonic evolution of Venusian and terrestrial coronae

A great variety of tectonic and volcanic features have been documented on Venus. It is widely appreciated that there are close spatial associations among certain types of tectonic structures and some classes of volcanic flows and constructs. Coronae are endowed with a particularly rich variety of volcanism. It is thought that coupled tectonic and volcanic aspects of coronae are cogenetic manifestations of mantle plumes. An outstanding feature of most venusian coronae is their circular or elliptical shape defined by peripheral zones of fracturing and/or folding. Some coronae are composite, consisting of two or more small coronae within a larger enclosing corona, suggesting complex histories of structured diapirism analogous in some ways to salt dome tectonics. Coronae range widely in size, from smaller than 100 km to over 1000 km in diameter. Volcanic features associated with venusian coronae include lunar-like sinuous rilles, thin lava flows, cinder cone-like constructs, shield volcanos, and pancake domes. Several types of volcanic features are often situated within or near a single corona, in many instances including land-forms indicating effusions of both low- and high-viscosity lavas. In some cases stratigraphic evidence brackets emplacement of pancake domes during the period of tectonic development of the corona, thus supporting a close link between the igneous and tectonic histories of coronae. These associations suggest emplacement of huge diapirs and massive magmatic intrusions, thus producing the tectonic deformations defining these structures. Igneous differentiation of the intrusion could yield a range of lava compositions. Head and Wilson suggested a mechanism that would cause development of neutral buoyancy zones in the shallow subsurface of Venus, thereby tending to promote development of massive igneous intrusions.

Kargel, J. S.↗