SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A process has been developed for growing polymer chains via anionic, cationic, or radical polymerization from the side walls of functionalized carbon nanotubes, which will facilitate greater dispersion in polymer matrices, and will greatly enhance reinforcement ability in polymeric material.
Any polymer synthesis routes result in molecular weight dispersity DAI, depending on the polymerization mechanism. The lowest dispersity polymers are those made by anionic and atom-transfer radical polymerization, which exhibit relatively narrow distributions DM=g,„1A172 — 1.02-1.04. This small divergence from monodispersity results in significant number of molecules that differ in their molecular weight from the average and their impact on the viscoelastic response remains an open question. Here the effects of low dispersity on stress relaxation and shear viscosity of entangled melts are studied using a coarse-grained model for polyethylene. Polymer melts with chain length dispersity set to follow a Schulz-Zimm distribution of Dm = 1.0 — 1.16 for an entangled polyethylene melt using molecular dynamic simulations. The systems were studied to times up to 800 ,us which is beyond the terminal time. These systems are compared to those with binary and ternary distributions. The stress relaxation functions were extracted from the Green-Kubo relation and from stress-strain relaxation following a uniaxial extension. We find on the entanglement time scale, both the mean squared displacement and the stress relaxation are independent of D m . The tube diameter and the rubbery plateau for entangled dynamics do not depend on D m . At longer times, the terminal relaxation time decreases as the faster motion of the shorter chains results in constraint release for the longer chains. Probing this low dispersity regime opens the way to evaluate the degree of dispersity that affects mechanical properties.
Block copolymers prepared by reversible addition–fragmentation chain transfer (RAFT) polymerization are often restricted to a specific comonomer blocking sequence that is dictated by intermediate radical stability and relative radical leaving group abilities. Techniques that provide alternative pathways for reinitiation of thiocarbonylthio-terminated polymers could allow access to block copolymer sequences currently unobtainable through the RAFT process. In this paper, we report a method for preparing “inverted” block copolymers, whereby the traditional order of monomer addition has been reversed through the use of photoiniferter-mediated radical polymerization. Specifically, thiocarbonylthio photolysis of xanthate- and dithiocarbamate-functional macromolecular chain transfer agents (macro-CTAs) led to the direct formation of leaving group macroradicals otherwise unaffordable by an addition–fragmentation mechanism. We believe this method could provide a route to synthesize multiblock copolymers of synthetically challenging comonomer sequences.
Amine-peroxide redox polymerization (APRP) has been highly prevalent in industrial and medical applications since the 1950s, yet the initiation mechanism of this radical polymerization process is poorly understood so that innovations in the field are largely empirically driven and incremental. Through a combination of computational prediction and experimental analysis, we elucidate the mechanism of this important redox reaction between amines and benzoyl peroxide for the ambient production of initiating radicals. Our calculations show that APRP proceeds through S N 2 attack by the amine on the peroxide but that homolysis of the resulting intermediate is the rate-determining step. We demonstrate a correlation between the computationally predicted initiating rate and the experimentally measured polymerization rate with an R 2 = 0.80. The new mechanistic understanding was then applied to computationally predict amine reductant initiators with faster initiating kinetics. This led to our discovery of N-(4-methoxyphenyl)pyrrolidine (MPP) as amine reductant, which we confirmed significantly outperforms current state-of-the-art tertiary aromatic amines by ~20-fold, making it the most efficient amine-peroxide redox initiator to date. The application of amines with superior kinetics such as MPP in APRP could greatly accelerate existing industrial processes, facilitate new industrial manufacturing methods, and improve biocompatibility in biomedical applications conducted with reduced initiator concentrations yet higher overall efficiency.
Depolymerization is a promising approach to reduce plastic waste by regenerating monomers from polymers, presenting a compelling solution to maintain a circular polymer economy. However, vinyl polymers with all-carbon backbones are especially difficult to depolymerize due to significant thermodynamic and kinetic barriers. Developments in reversible-deactivation radical polymerization and catalytic methods demonstrate how tuning polymer structure and reaction conditions can address these challenges. This Viewpoint revisits early studies on radical depolymerization and recent advances enabling monomer recovery at lower temperatures. Exciting current trends to utilize depolymerization as a strategy for tuning polymer material properties and upcycling waste polymer to high-value products are discussed. Finally, we outline key directions to make vinyl polymer depolymerization scalable, efficient, and economically viable.
Free-radical polymerizations are used for a wide range of applications but are detrimentally impacted by the presence of oxygen. Zinc phthalocyanines have been previously used as singlet oxygen generators to excite radical-consuming ground-state triplet oxygen into its less reactive singlet state prior to photoexcitation of a photoinitiator. We report for the first time that polymerization can be achieved via irradiation of UV band of phthalocyanine and that photosensitization and photoinitiation can be independently achieved via irradiation of its two distinct absorption bands to reduce oxygen inhibition and initiate polymerization without the need for additional treatment. We propose a mechanism for this unique photoinitiation phenomenon and verify its feasibility via computational and experimental approaches. This new class of dual-photosensitive molecules shows promising utility in applications that are adversely impacted by the presence of oxygen, such as coatings and stereolithography.
Synthetic methods to control the structure of materials at sub–micron scales are typically based on the self–assembly of structural building blocks with precise size and morphology. On the other hand, many living systems can generate structure across a broad range of length scales in one step directly from macromolecules, using phase separation. Here, we introduce and control structure at the nano– and microscales through polymerization in the solid state, which has the unusual capability of both triggering and arresting phase separation. In particular, we show that atom transfer radical polymerization (ATRP) enables control of nucleation, growth, and stabilization of phase–separated poly–methylmethacrylate (PMMA) domains in a solid polystyrene (PS) matrix. ATRP yields durable nanostructures with low size dispersity and high degrees of structural correlations. Furthermore, we demonstrate that the length scale of these materials is controlled by the synthesis parameters.
The Fuel Resources program of the Fuel Cycle Research and Development program of the Office of Nuclear Energy (NE) has focused on assuring that nuclear fuel resources are available in the United States for a long term. An immense source of uranium is seawater, which contains an estimated amount of 4.5 billion tonnes of dissolved uranium. Extraction of the uranium resource in seawater can provide a price cap and ensure centuries of uranium supply for future nuclear energy production. NE initiated a multidisciplinary program with participants from national laboratories, universities, and research institutes to enable technical breakthroughs related to uranium recovery from seawater. The goal is to develop advanced adsorbents to make the seawater uranium recovery technology a cost competitive, viable technology. Under this program, Oak Ridge National Laboratory (ORNL) has developed several novel adsorbents, which enhanced the uranium capacity 4-5 times from the state-of-the art Japanese adsorbents. Uranium exists uniformly at a concentration of ~3.3 ppb in seawater. Because of the vast volume of the oceans, the total estimated amount of uranium in seawater is approximately 1000 times larger than its amount in terrestrial resources. However, due to the low concentration, a significant challenge remains for making the extraction of uranium from seawater a commercially viable alternative technology. The biggest challenge for this technology to overcome to efficiently reduce the extraction cost is to develop adsorbents with increased uranium adsorption capacity. Two major approaches were investigated for synthesizing novel adsorbents with enhanced uranium adsorption capacity. One method utilized conventional radiation induced graft polymerization (RIGP) to synthesize adsorbents on high-surface area trunk fibers and the other method utilized a chemical grafting technique, atom-transfer radical polymerization (ATRP). Both approaches have shown promising uranium extraction capacities: RIGP adsorbent achieved 5.00 ± 0.15 g U/kg-ads., while ATRP adsorbent achieved 6.56 ± 0.33 g U/kg-ads., after 56 days of seawater exposure. These achieved values are the highest adsorption capacities ever reported for uranium extraction from seawater. The study successfully demonstrated new fiber materials with sorption capacity at 5.0 g-U/kg adsorbent under marine testing conditions. Further optimization, investigation of other new materials as well as deepening our understanding will develop adsorbents that have even higher uranium adsorption capacity, increased selectivity, and faster kinetics.
Modern day synthesis protocols of methacrylate monolithic polymer adsorbent are based on existing polymerization blueprint without a thorough understanding of the dynamics of pore structure and formation. This has resulted in unproductiveness of polymer adsorbent consequently affecting purity and recovery of final product, productivity, retention time and cost effectiveness of the whole process. The problems magnified in monolith scaling-up where internal heat buildup resulting from external heating and high exothermic polymerization reaction was reflected in cracking of the adsorbent. We believe that through careful and precise control of the polymerization kinetics and parameters, it is possible to prepare macroporous methacrylate monolithic adsorbents with controlled pore structures despite being carried out in an unstirred mould. This research involved the study of the effect of scaling-up on pore morphology of monolith, in other words, porous polymethacrylate adsorbents that were prepared via bulk free radical polymerization process by imaging the porous morphology of polymethacrylate with scanning electron microscope.
Polystyrene–poly(methyl methacrylate)–polylactide (PS–PMMA–PLA) triblock bottlebrush copolymer with nearly symmetric volume fractions was synthesized by grafting from a symmetrical triblock backbone and the resulting melt was characterized by scanning electron microscopy and small-angle X-ray scattering. The copolymer backbone was prepared by sequential reversible addition–fragmentation chain transfer (RAFT) polymerization of solketal methacrylate (SM), 2-(bromoisobutyryl)ethyl methacrylate (BIEM), and 5-(trimethylsilyl)-4-pentyn-1-ol methacrylate (TPYM). PMMA branches were grafted by atom transfer radical polymerization from the poly(BIEM) segment, PS branches were grafted by RAFT polymerization from the poly(TPYM) block after installment of the RAFT agents, while PLA side chains were grafted from the deprotected poly(SM) block. The resulting copolymer was found to exhibit a lamellae morphology with a domain spacing of 79 nm. Differential scanning calorimetry analysis indicated that PMMA was preferentially mixing with PS while phase separating from PLA domains.
Photoluminescent nanosized quasi-spherical polymeric assemblies prepared by the hydrothermal reaction of polyacrylonitrile (PAN), ht-PLP PAN , were demonstrated to have the ability to photo-induce atom transfer radical polymerization (ATRP) catalyzed by low, parts per million concentrations of Cu II complex with tris(2-pyridylmethyl)amine (TPMA). Such photo induced ATRP reactions of acrylate and methacrylate monomers were performed in water or organic solvents, using ht-PLP PAN as the photo-cocatalyst under blue or green light irradiation. Mechanistic studies indicate that ht-PLP PAN helps to sustain the polymerization by facilitating the activation of alkyl bromide species by two modes: 1) green or blue light-driven photoreduction of the Cu II catalyst to the activating Cu I form, and 2) direct activation of dormant alkyl bromide species which occurs only under blue light. The photoreduction of the Cu II complex by ht-PLP PAN was confirmed by linear sweep voltammetry performed under illumination. Analysis of the polymerization kinetics in aqueous media indicated even though Cu I complexes comprised only 1–1.4% of all Cu species at equilibrium, they exhibited high activation rate constant and activated the alkyl bromide initiators five to six orders of magnitude faster than ht-PLP PAN .
BACKGROUND: Although the lignins and lignans, both monolignol-derived coupling products, account for nearly 30% of the organic carbon circulating in the biosphere, the biosynthetic mechanism of their formation has been poorly understood. The prevailing view has been that lignins and lignans are produced by random free-radical polymerization and coupling, respectively. This view is challenged, mechanistically, by the recent discovery of dirigent proteins that precisely determine both the regiochemical and stereoselective outcome of monolignol radical coupling. RESULTS: To understand further the regulation and control of monolignol coupling, leading to both lignan and lignin formation, we sought to clone the first genes encoding dirigent proteins from several species. The encoding genes, described here, have no sequence homology with any other protein of known function. When expressed in a heterologous system, the recombinant protein was able to confer strict regiochemical and stereochemical control on monolignol free-radical coupling. The expression in plants of dirigent proteins and proposed dirigent protein arrays in developing xylem and in other lignified tissues indicates roles for these proteins in both lignan formation and lignification. CONCLUSIONS: The first understanding of regiochemical and stereochemical control of monolignol coupling in lignan biosynthesis has been established via the participation of a new class of dirigent proteins. Immunological studies have also implicated the involvement of potential corresponding arrays of dirigent protein sites in controlling lignin biopolymer assembly.
Synthetic polymeric nanofiltration membrane processes offer an alternate low-energy option to energy-intensive distillation to fractionate similar size organic solvents for chemical, petroleum, food and biotechnology industries. Here, in this study, we synthesize and test a new class of structure-by-design hydrophilic polymeric brush membranes, that address the limitations of commercial polymer membranes, are tunable and exhibit commercially relevant filtration performance. Because these brush membranes are grafted by Single Electron Transfer-Living Radical Polymerization (SET-LRP) and replace statistically random phase inversion or interfacial polymerization used for synthesizing commercial polymer membranes, their porous structure can be remodeled by varying their morphology and chemistry. We graft hydroxyethyl methacrylate (HEMA) brush structures with short and long crosslinkers, demonstrate two competing phenomena - pore stiffening and opening - and obtain high selectivity at reasonable permeability for commercially relevant methanol/toluene separation. This new class of stable, tunable, and scalable membranes offers exciting opportunities to reduce energy for separation of organic solvents.
Flow chemistry offers high reaction yield, kinetic control, improved safety, reliability, scalability, and greater degree of process control. Herein, hyperbranched polymer-grafted silica microparticles (HP-SMPs) are synthesized in a commercially available flow reactor through atom transfer radical polymerization. Initiator-anchored silica microparticles are obtained by in situ silanization in the flow reactor. Hyperbranched poly[2-(dimethylamino)ethylmethacrylate] chains are grafted onto the initiator-anchored SMPs through inimer–monomer ratio control. To demonstrate the efficiency and universality of this approach in grafting polymers onto SMPs, multiple hyperbranched polymeric structures are obtained by varying the inimer concentration. Dye absorption test is conducted to demonstrate the potential applications of HP-SMPs.
Here, two photon polymerization (TPP) is a precise, reliable, and increasingly popular technique for rapid prototyping of micro-scale parts with sub-micron resolution. The materials of choice underlying this process are predominately acrylic resins cross-linked via free-radical polymerization. Due to the nature of the printing process, the derived parts are only partially cured and the corresponding mechanical properties, i.e. modulus and ultimate strength, are lower than if the material were cross-linked to the maximum extent. Herein, post-print curing via UV-driven radical generation, is demonstrated to increase the overall degree of cross-linking of low density, TPP-derived structures.
We have assigned the vibrational spectra of Os 1 and Os 2 complexes of propene, butene, and acetylene, and have used them for the assignment of the vibrational frequencies of surface alkenes and alkynes. We have measured the rates of H• transfer from (C 5 R 5 )Cr(CO) 3 H to olefins of many structural types, and have learned that even one substituent on the carbon to which the H• is transferred slows down the reaction considerably. We have shown that these Cr hydrides are useful catalysts for chain transfer during radical polymerization reactions. We have determined the strengths of several M–H bonds (in particular Cr–H ones), and have confirmed that the hydrides of first-row transition metals are particularly useful for generating radicals. We have used H• transfer to terminal methylenes to generate radicals that cyclize. We have shown that (C 5 R 5 )Cr(CO) 3 H can be regenerated under H 2 and is therefore catalytic, but that (P–P)V(CO) 4 H cannot be regenerated from H 2 and therefore can only be used stoichiometrically for radical generation. (The V-H bonds are weaker than the Cr–H ones, and the H• transfer to an olefin is therefore faster.) We have found that, under five atm of H 2 pressure, cobaloximes catalyze H• transfer; they efficiently remove an H• from cyclized radicals, and therefore can be used to catalyze the cycloisomerization of some olefins. We have explored the one- and two-electron oxidation of (Ph 3 P) 6 Cu 6 H 6 . One-electron oxidation (which is reversible) generates a cation radical, whereas two-electron oxidation generates loss of a hydride (i.e., two electrons and a proton). We have found that the hydricity of (Ph 3 P) 6 Cu 6 H 6 is between 36 and 50 kcal/mol. We have shown that uncongested organic radicals (i.e., TEMPO) can catalyze H• transfer from (C 5 R 5 )Cr(CO) 3 H to congested radicals like Ar 3 C•. We have examined the one-electron oxidation of [CpV(CO 3 H] – , and have inferred from the results that the reduction of alkyl iodides with [CpV(CO 3 H] – occurs by one-electron transfer. We have been able to use that reagent to catalyze radical cyclizations from H 2 and appropriate alkyl iodides.
Herein, we describe polymerized ionic liquids, demonstrate the synthesis of polymerized ionic liquids, and demonstrate the polymerization of triazolium monomers. One embodiment shows the polymeriazation of the triazolium monomers with bis(trifluoromethanesulfonyl)imide anions. In another embodiment we show the feasibility of copolymerizing with commodity monomers such as styrene using free radical polymerization techniques.
The goal of this study is to use ABA triblock copolymers with central bottlebrush B segments and crystalline linear chain A segments to demonstrate the effect of side chains on the formation and mechanical properties of physical networks cross-linked by crystallites. For this purpose, a series of bottlebrush copolymers was synthesized consisting of central amorphous bottlebrush polymer segments with a varying degree of polymerization (DP) of poly(n-butyl acrylate) (PnBA) side chains and linear tail blocks of crystallizable poly(octadecyl acrylate-stat-docosyl acrylate) (poly(ODA-stat-DA)). The materials were generated by sequential atom transfer radical polymerization (ATRP) steps starting with a series of bifunctional macroinitiators followed by the growth of two ODA-stat-DA linear-chain tails and eventually growing poly(nBA) side chains with increasing DPs. Crystallization of the poly(ODA-stat-DA) tails resulted in a series of reversible physical networks with bottlebrush strands bridging crystalline cross-links. They displayed very low moduli of elasticity of the order of 10 3 –10 4 Pa. These distinct properties are due to the bottlebrush architecture, wherein densely grafted side chains play a dual role by facilitating disentanglement of the network strands and confining crystallization of the linear-chain tails. This combination leads to physical cross-linking of supersoft networks without percolation of the crystalline phase. The cross-link density was effectively controlled by the DP of the side chains with respect to the DP of the linear tails (n A ). Furthermore, shorter side chains allowed for crystallization of the linear tails of neighboring bottlebrushes, while steric repulsion between longer side chains hindered the phase separation and crystallization process and prevented network formation.