Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reacting Particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Onset of Fluidization in MP-PIC Simulations using MFIX-Exa

Fluidized bed reactors are used across a variety of industries, including for energy processes like pyrolysis that result in low-cost energy products. Design and scale-up of fluidized beds is de-risked by modeling and simulation, utilizing tools like NETL’s MFIX-Exa High-Performance Computing (HPC) code for reacting multiphase flow. This report summarizes an investigation into the breadth of problems to which MFIX-Exa may be applied, specifically with regard to low fluid velocities and the onset of fluidization. A simple fluidization study is conducted both experimentally and numerically for particles of interest, then reactor simulations are compared to cold flow experiments for uniform distributor plates. Approaches for modeling bubble caps are also presented.

discrete particle method↗
DOE OSTI2023

Investigation of the Effect of Injected CO 2 on the Morrow B Sandstone through Laboratory Batch Reaction Experiments: Implications for CO 2 Sequestration in the Farnsworth Unit, Northern Texas, USA

About one million tons of CO 2 have been injected into the Farnsworth unit to date. The target reservoir for CO 2 injection is the Morrow B Sandstone, which is primarily made of quartz with lesser amounts of albite, calcite, chlorite, and clay minerals. The impact of CO 2 injection on the mineralogy, porosity, and pore water composition of the Morrow B Sandstone is a major concern. Although numerical modeling studies suggest that porosity changes will be minimal, significant alterations to mineralogy and pore water composition are expected. Given the implications for CO 2 storage effectiveness and risk assessment, it is crucial to verify the accuracy of theoretical model predictions through laboratory experiments. To this end, batch reaction experiments were conducted to model conditions near an injection well in the Morrow B Sandstone and at locations further away, where the CO 2 has been diluted by formation water. The laboratory experiments involved submerging thin sections of both coarse- and fine-grained facies of the Morrow B Sandstone in formation water samples with varying levels of CO 2 . The experiments were conducted at the reservoir temperature of 75 °C. Two experimental runs were conducted, one lasting for 61 days and the other for 72 days. The initial fluid composition used in the second run was the same as in the first. The mineralogy changes in the thin sections were analyzed using SEM and the Tescan Integrated Mineral Analyzer (TIMA), while changes in the composition of the formation water were determined using ICP-AES. During each experiment, a thin layer of white fine-grained particles consisting mainly of dolomite and silica formed on the surface of the thin sections, leading to significant reductions in Ca, Mg, and Sr in the formation water. This outcome is consistent with numerical model predictions that dolomite would be the primary mineral that would react with injected CO 2 and that silica would be oversaturated in the formation water. Changes in mineral abundance in the thin sections themselves were much less systematic than in the theoretical modeling experiments, perhaps reflecting heterogeneities in the mineral grain size surface area to volume ratios and mineral distributions in the thin sections not considered in the numerical models.

58 GEOSCIENCES↗
DOE OSTI2026

The effect of varying powder feedstock chemistry and printing atmosphere on the microstructure of additively manufactured nickel-based ODS alloys: Role on stabilization of cellular structures vs. oxide dispersion formation

Nickel-based alloys have a wide variety of structural applications due to their high corrosion resistance and mechanical strength which depend on solid solution strengthening, or the formation of oxides and/or intermetallic precipitation for their properties. In this study, the microstructure of six Ni–Cr–Y–Ti–Al powder batches designed for the production of oxide dispersion strengthened nickel were compared. These batches varied in chemistry and atomization technique used which included Gas Atomization Reactive Synthesis (GARS). The batches of powder were then consolidated via Additive Manufacturing (AM) Powder Bed Fusion using Laser Beam (PBF-LB) and characterized via transmission electron microscopy to elucidate the influence of powder feedstock (i.e. synthesis methodology and chemistry) on the PBF-LB microstructure. The study investigates (i) how the amount of yttrium and titanium additions in the powder feedstock and the addition of oxygen during the processing (through GARS) affect the microstructure of the powder itself and the AM printed microstructure, and (ii) how the control of oxygen addition in the printing atmosphere during the PBF-LB printing process itself is another important parameter for achieving the formation of the wanted oxide dispersion versus the stabilization of the cellular structure (often observed in AM processed alloys). Microstructural characterization of both powder particles and additively manufactured nickel alloys in this study provide important insights into the movement of yttrium within the material upon solidification, particularly along cell boundaries, and how yttrium behaves depending on alloy chemistry. When a threshold of yttrium content is reached within the system, yttrium consistently reacts to form an intermetallic along cell boundaries instead of forming oxide nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multiphysics Simulation of the Thermal Response of a Nanofibrous Target in a High-Intensity Beam

Nanofibrous structures are of high interest to the fields of engineering and materials science, and investigation of their properties as well as discovery of novel applications for them both constitute lively areas of research. A very promising application of nanofiber mats lies in the field of accelerator technology: beam targets made from nanofiber mats offer a solution to the problem of advancing the "intensity frontier"–-the limit on the beam intensities that can be realized in fixed target experiments and neutrino production facilities. However, testing has shown that the survivability of these nanofiber targets depends strongly on their manufacturing parameters, such as the packing density of fibers. In this work, we will use multiphysics simulations to perform a thermal study on how nanofiber targets react to high intensity beams, so that the dependency of the targets’ lifetime on their construction parameters can be better understood.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Effect of Humidity on the Reactive Uptake of Ammonia and Dimethylamine by Nitrogen-Containing Secondary Organic Aerosol

This study investigated the uptake of ammonia (NH3) by secondary organic aerosol (SOA) particles generated via limonene photooxidation or ozonolysis as well as the uptake of dimethylamine (DMA) by limonene ozonolysis, α-cedrene photooxidation, or toluene photooxidation SOA in an environmental chamber between 0–50% relative humidity. In addition to the acid-base equilibrium uptake, NH3 and DMA can react with SOA carbonyl compounds converting them into nitrogen-containing organic compounds (NOCs). The effective reactive uptake coefficients for the formation of NOCs from ammonia were measured on the order of 10−5. The observed DMA reactive uptake coefficients ranged from 10−5 to 10−4. Typically, the reactive uptake coefficient decreased with increasing relative humidity. This is consistent with NOC formation by a condensation reaction between NH3 or DMA with SOA, which produces water as a product. Ammonia is more abundant in the atmosphere than amines. However, the larger observed reactive uptake coefficient suggests that amine uptake may also be a potential source of organic nitrogen in particulate matter.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Methods and apparatus for additively manufacturing structures using in situ formed additive manufacturing materials

A method of additively manufacturing a structure comprises nuclear reactor comprises disposing a feed material on a surface of a substrate in a reaction vessel, disposing at least one material formulated and configured to react with the feed material in the reaction vessel, and exposing the feed material and the at least one material to energy from an energy source to react the feed material and the at least one material to form an additive manufacturing material and reaction by-products. The additive manufacturing material is separated from the reaction by-products and exposed to energy from the energy source to form inter-granular bonds between particles of the additive manufacturing material and form a layer of a structure comprising the additive manufacturing material. Related apparatuses and methods are disclosed.

van Rooyen, Isabella J.↗
DOE OSTI2022

Cesium intercalation of graphene: A 2D protective layer on alkali antimonide photocathode

Alkali antimonide photocathodes have wide applications in free-electron lasers and electron cooling. The short lifetime of alkali antimonide photocathodes necessitates frequent replacement of the photocathodes during a beam operation. Furthermore, exposure to mediocre vacuum causes loss of photocathode quantum efficiency due to the chemical reaction with residual gas molecules. Theoretical analyses have shown that covering an alkali antimonide photocathode with a monolayer graphene or hexagonal boron nitride protects it in a coarse vacuum environment due to the inhibition of chemical reactions with residual gas molecules. Alkali antimonide photocathodes require an ultra-high vacuum environment, and depositing a monolayer 2D material on it poses a serious challenge. In the present work, we have incorporated a novel method known as intercalation, in which alkali atoms pass through the defects of a graphene thin film to create a photocathode material underneath. Initially, Sb was deposited on a Si substrate, and a monolayer graphene was transferred on top of the Sb film. Heat cleaning around 550–600 °C effectively removed the Sb oxides, leaving metallic Sb underneath the graphene layer. Depositing Cs on top of a monolayer graphene enabled the intercalation process. Atomic force microscopy, Raman spectroscopy, x-ray photoelectron spectroscopy, low energy electron microscopy, and x-ray diffraction measurements were performed to evaluate photocathode formation underneath the monolayer graphene. Our analysis shows that Cs penetrated the graphene and reacted with Sb and formed Cs 3 Sb.

2D materials↗
DOE OSTI2020

An Adaptive-Mesh-Refinement Based Computational Tool for Simulating Catalysis at Mesoscale

In this work, we present a computational tool for mesoscale applications using open-source exascale- computing compatible adaptive-mesh-refinement (AMR) library, AMReX [2]. AMReX is software library that enables development of application solvers with block-structured Cartesian AMR. Our tool has capabilities to include realistic geometry representation, chemical species transport, reactions and thermodynamics that are critical for capturing mesoscale physics. A significant achievement is the ability of our solver to automatically import electron microscopy data in the form of a stereolithography (STL) or pixelated file format (mrc, tiff) without undergoing the tedious task of unstructured mesh generation. This feature allows for rapid simulation of catalyst particles with complex morphologies using an immersed-boundary formulation. The use of AMR allows for higher resolutions at catalyst surface interfaces, which in turn provides an accurate description of surface reactions and transport. Our solver uses a hybrid distributed and shared memory parallelism (OpenMP/GPU-based) with which strong scaling up to 10,000 processors for realistic catalyst particle simulations have been demonstrated.

BIOMASS FUELS,MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Sol–Gel‐Based Advanced Porous Silica Materials for Biomedical Applications

Abstract Porous silica‐based materials have burgeoning applications ranging from fillers and additives, to adsorbents, catalysts, and recently therapeutic agents and vaccines in nanomedicine. The preponderance of these materials is made by sol–gel processing wherein soluble silica precursors are reacted to form amorphous networks composed of siloxane bonds. The facile sol–gel approach allows for an unlimited variety of binary tertiary and more complex chemical compositions including organic ligands and networks resulting in so‐called organic–inorganic hybrid materials. Here, a brief review of the recent progress in sol–gel‐derived silica materials prepared as particles, thin films, biosilica/silica bioreplicas (of molecules, cells and organisms), and their related preparation, properties, and bioapplications is provided. First, it highlights the recent achievements of mesoporous silica nanoparticles in biomedical applications, including therapeutic agent delivery, multimodal imaging and theranostics, and bone tissue engineering and repair. Second, the research in evaporation‐induced self‐assembly (EISA)‐based mesostructured silica thin films and cell‐directed EISA in bio/nano interfaces for various bioapplications, such as bioactive coatings, biosensing, and living cell immobilization, has been reviewed. Third, the pioneering work in biomimetic silicification/immobilization of biomolecules and bio‐organisms and silica bioreplication of complex bio‐organisms is summarized. Finally, it is concluded with personal perspectives on the directions of future work on this field.

Lei, Qi↗
DOE OSTI2022

Facile Surface Coatings for Performance Improvement of NMC811 Battery Cathode Material

High nickel content layered oxide LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) is a promising cathode material with a high theoretical capacity of 200 mAh g -1 for use in high energy density lithium-ion batteries. However, its surface can easily get passivated by LiOH and Li 2 CO 3 due to its surface residual Li 2 O being reacting with ambient moisture and CO 2 . Herein, NMC811 was treated in a 3.0 M solution of lithium bis(fluorosulfonyl)imide (LiFSI) in dimethyl carbonate (DMC) at 60 °C for 8 h, 16 h and 24 h, respectively, resulting in coating of the NMC811 surface with LiF due to the basic nature of those residual lithium salts that react with LiFSI. The facile treatment of NMC811 in LiFSI/DMC not only improves the cycling stability but also enhances the capacity of the Li/NMC811 cells, mainly because of the thinning of the Li 2 CO 3 layer as suggested by cyclic voltammograms and impedance analyses. This method opens a new avenue for activation of passivated NMC811 particles for practical battery applications.

25 ENERGY STORAGE↗
DOE OSTI2020

O 2 -Oxidation of Individual Graphite and Graphene Nanoparticles in the 1200 – 2200 K Range: Particle-to-Particle Variations and the Evolution of the Reaction Rates and Optical Properties

The kinetics for O 2 oxidation of individual graphite and graphene platelet nanoparticles (NPs) were studied as a function of temperature (1200 to 2200 K) at varying oxygen partial pressures, using a single nanoparticle mass spectrometry method. NP temperature (TNP) was measured by measuring the NP thermal emission spectra during the kinetics studies. The initial oxidation efficiency is found to peak in the 1200 to 1500 K range, dropping by an order of magnitude as TNP was increased above 2000 K. There were large NP-to-NP variations in the oxidation rates, attributed to variations in the NP surface structure. In addition, the oxidation efficiencies evolved, non-monotonically, as the NPs reacted, decreasing by factors of between 10 and 300. This evolution of reactivity is attributed to changes in the NP surface structure due to the combination of oxidation and annealing. In conclusion, the optical properties, including wavelength dependence of the emissivity and the absorption cross section for the 532 nm heating laser, also tended to evolve as the NPs oxidized, but differently for each individual NP, presumably reflecting differences in the initial structures and their evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Redox-Based Chemical Looping Large-Scale Air Separation Unit Designs Using Perovskite Material

Oxygen production by means of air separation through redox cycle reactions of Sr 1–x Ca x FeO 3-δ perovskite particles is examined numerically in the context of modular large-scale units. Fixed-bed, multicomponent reactor designs allowing for the recovery of the energy released by the exothermic oxidation (or adsorption) to enhance the endothermic reduction (or desorption) of the perovskite material are considered and compared against a baseline cylindrical packed bed. Numerically, the gas–solid reacting system is approximated as a single-phase reacting gas flow through a porous medium of constant porosity. The redox kinetics account for the oxygen nonstoichiometry of the perovskite, which exhibits a dependence on the temperature and the oxygen partial pressure, in order to describe some mechanisms of the oxygen vacancies. Results show that the spontaneous release of the oxygen from the lattice arrangements, through the thermal management of the heat of the oxidation reaction from the geometrical design of the reactors, can be enhanced up to 4% with respect to the baseline oxygen production of 0.201 g O 2 ·h –1 ·g perovskite –1 with the cylindrical packed bed, in the condition of operations in this work, at 500 °C. Sensitivity to the operation temperature showed that the oxygen production is greatly enhanced by approximately 30% with the increase of the temperature from 500 to 550 °C. We report this result is consistent with experimental observations of faster release of the oxygen from the lattice arrangements of this perovskite at 550 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Detonation Waves in High Explosives

A material at high temperature can react or decompose. For an energetic material, the reaction is exothermic and releases chemical energy that would further increase the temperature. Under some circumstances, when a reaction is triggered, such a reaction can propagate and the material rapidly releases a large amount of energy giving rise to an explosion. Examples of such materials are aerosols, suspensions of solid particles or liquid droplets in a gas; such as coal dust, grain dust and fuel-air explosions. Frequently, explosions are due to accidents. A spectacularly destructive example is the recent explosion of a large quantity of ammonium nitrate (thousands of tons) in Beirut, Lebanon (August 2020); see for example Beirut explosion. Ammonium nitrate is used as a fertilizer. It and the aerosols are not considered to be explosives due to the limited conditions for which an explosion can occur. An aerosol gets the oxidizer from the surrounding air. Burning requires diffusion of the oxidizer to the particle surface where the reaction occurs. A large density of small particles is required for a fast enough reaction to support an explosion. In contrast, an explosive is an energetic material with both fuel and oxidizer mixed on a molecular scale (either premixed gases or within molecules of a solid). This allows fast enough reactions over a wide range of conditions to support a self-propagating reactive wave known as a detonation wave. A detonation wave can be controlled and an explosive used for useful purposes such as in mining, construction, demolition, explosive welding, argon flash lamp, pulsed power using a magnetic flux generator [see also Goforth et al., 2015], jet cutter with shaped charge, explosive art, and generating conditions to study the response of materials at high strain rates and high pressures [see for example, Marsh, 1980]. Explosives are also used in conventional munitions and nuclear weapons. The focus of this book is on the theory and phenomenology of solid high explosives (HEs); in particular, plastic-bonded explosives (PBXs). Some aspects of detonation wave theory are needed to interpret explosive data. Hence, the theory is presented before the detonation wave phenomenology. A familiarity with fluid flow, specifically the notion of shock waves and the shock loci are assumed. In the remainder of this chapter we give a brief overview on the basic properties of detonation waves and PBXs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

On the mechanism of soot nucleation

The mechanism of carbon particulate (soot) inception has been a subject of numerous studies and debates. The article begins with a critical review of prior proposals, proceeds to the analysis of factors enabling the development of a meaningful nucleation flux, and then introduces new ideas that lead to the fulfillment of these requirements. In the new proposal, a rotationally-activated dimer is formed in the collision of an aromatic molecule and an aromatic radical; the two react during the lifetime of the dimer to form a stable, doubly-bonded bridge between them, with the reaction rooted in a five-member ring present on the molecule edge. Several such reactions were examined theoretically and the most promising one generated a measurable nucleation flux. The consistency of the proposed model with known aspects of soot particle nanostructure is discussed. Here, the foundation of the new model is fundamentally the H-Abstraction-Carbon-Addition (HACA) mechanism with the reaction affinity enhanced by rotational excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Computational fluid dynamics modeling and analysis of silica nanoparticle synthesis in a flame spray pyrolysis reactor

Flame Spray Pyrolysis (FSP) is a method for large-scale production of nanoparticles and nanoscale powders employed in a wide range of industrial applications. Particle size and morphology are complex functions of the physicochemical phenomena occurring in the FSP reactor. An extensive study of FSP-related phenomena can be utilized to develop effective strategies for achieving desired particle size/morphology and scaling up the overall yield of an FSP system. In this work, a computational fluid dynamics (CFD) model of an FSP reactor is developed to simulate the coupling of key phenomena involved in the particle synthesis process: liquid spray breakup and evaporation, mixing, combustion, and particle formation/growth of silica nanoparticles. Herein, the particle sizes and their distributions from the CFD simulations are validated against experimental data. Subsequently, the simulations are utilized to investigate the impact of process parameters on the resultant flame dynamics and particle growth. Firstly, the CFD results show that the particle sizes are strongly correlated with the precursor concentration in the solvent. At lower precursor concentrations, the spread of the distribution is relatively insensitive to the value of the concentration. At higher concentrations, the spread is higher as the collision probability between particles is higher. Secondly, increasing the pilot flow rate increases the length of the pilot flames impacting the local ignition location of the spray flame. Lastly, it is shown that the dispersion gas flow rate strongly influences the spray flame shape. This shape can be used for control of particle growth as it helps determine the regions of high temperature and the residence time of the particles in the high temperature region enabling the design and process optimization of the FSP reactor.

42 ENGINEERING↗
DOE OSTI2025

Probing Carbon Mineralization Mechanisms in Pore and Bulk Fluids by Harnessing Architected Calcium Silicates

The ability to synthesize materials with well-controlled pore structures gives us unprecedented control over probing fluid interactions with reactive interfaces and advancing calibrated insights into coupled chemo-morphological interactions. One of the primary challenges in developing crystalline silicate materials lies in achieving ordered pore structures. Existing approaches of producing amorphous mesoporous metal silicates via sol–gel methods and heat-treatment of these materials to produce crystalline phases cause the pore structures in the amorphous phases to collapse. To overcome this challenge, carbon coating of amorphous mesoporous calcium silicate particles is carried out to retain the pore structure, while the material is heated to produce crystalline calcium silicate with calcium sulfate inclusions. The pore diameter in these materials is about 3.9 nm, with a surface area and a pore volume of 28.75 m 2 /g and 0.092 cm 2 /g, respectively. The mechanisms of carbon mineralization are investigated by reacting architected calcium silicate with 1 M Na 2 CO 3 and monitoring the evolution in the structural phases using operando wide-angle X-ray scattering (WAXS) measurements. Formation of stable calcium carbonate polymorph or calcite and metastable calcium carbonate polymorph or vaterite in pore and bulk fluids, respectively, resulting from the reaction between Na 2 CO 3 and CaSiO 3 , are noted. The mechanisms associated with carbon mineralization are delineated using ReaxFF molecular dynamics (MD) simulations. The surface dissolution reaction is initiated by 2H + ions that replace a Ca 2+ ion in the Ca–silicate matrix. Ca 2+ ions in the solution initially react with water to form calcium hydroxide and eventually form calcium (bi)carbonate. A slow and gradual increase in the formation of sodium silicate in the solution resulting from the reactions of silicic acid or the silicon dioxide reaction with sodium hydroxide is noted. When carbon mineralization occurs in environments bearing interfacial fluids, calcite is the dominant calcium carbonate polymorph, as determined using experiments with pore fluids and molecular-scale simulations. In conclusion, these studies provide fundamental insights into the mechanisms underlying the carbon mineralization of calcium silicate informed by experiments and molecular-scale simulations.

Calcium↗
DOE OSTI2022

Field quality of the 4.5 m-long MQXFA pre-series magnets for the HL-LHC Upgrade as observed during magnet assembly

We report that the U.S. High-Luminosity LHC Accelerator Upgrade Project (HL-LHC AUP) is developing MQXFA magnets, a series of 4.5 m long 150 mm aperture high-field Nb 3 Sn quadrupole magnets for the HL-LHC upgrade at CERN. Five pre-series magnets, MQXFA03 through MQXFA07, have been developed. During the magnet assembly stage, we perform magnetic measurements on the coil-pack sub-assembly and magnets after loading to track the field quality for two purposes. First, it serves as a quality assurance tool to check if the magnetic field quality is on track to meet the acceptance criteria. Magnetic measurements are used to understand if magnetic shims are needed to compensate low-order field errors and to meet the field quality targets. Second, the measurements during the assembly stage can also help understand the field quality, especially the geometric field errors, for Nb 3 Sn accelerator magnets. Here we summarize the measurement results of the pre-series MQXFA magnets, including the magnetic axis and twist angle. The results will provide useful feedback for the series production of Nb 3 Sn magnets and on the optimization of field quality of accelerator magnets based on the wind-and-react Nb 3 Sn technology.

43 PARTICLE ACCELERATORS↗