Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reactor physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Development of Reactor Physics Benchmark Evaluations for Power Burst Facility Experiments

The PBF is an open vessel with a closed loop water cooling system that can handle up to 28MW of heat generation during steady state operations. This project details the facility characteristics relevant to performing simulation benchmarks for the intent of inclusion in the International Reactor Physics Experiment Evaluation Project (IRPhEP).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Transient Test Reactor Physics Workshop - May 2016

This Workshop was conducted in conjunction with the PHYSOR Conference being held in Sun Valley, Idaho, USA from May 1st -5th, 2016. The intent was to conduct a technical exchange on transient test reactor physics and modeling techniques used to support the Idaho National Laboratory TREAT facility and CABRI (CEA/IRSN) of France. Currently, several parallel programs are independently supporting critical aspects of TREAT physics analysis. Successful implementation will require active collaboration across programmatic boundaries to ensure the transfer of critical information as well as coordination and prioritization of activities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reactor Physics Scoping and Characterization Study on Implementation of TRIGA Fuel in the Advanced Test Reactor

The Advanced Test Reactor (ATR), under the Reduced Enrichment for Research and Test Reactors (RERTR) Program and the Global Threat Reduction Initiative (GTRI), is conducting feasibility studies for the conversion of its fuel from a highly enriched uranium (HEU) composition to a low enriched uranium (LEU) composition. These studies have considered a wide variety of LEU plate-type fuels to replace the current HEU fuel. Continuing to investigate potential alternatives to the present HEU fuel form, this study presents a preliminary analysis of TRIGA® fuel within the current ATR fuel envelopes and compares it to the functional requirements delineated by the Naval Reactors Program, which includes: greater than 4.8E+14 fissions/s/g of 235 U, a fast to thermal neutron flux ratio that is less than 5% deviation of its current value, a constant cycle power within the corner lobes, and an operational cycle length of 56 days at 120 MW. Other parameters outside those put forth by the Naval Reactors Program which are investigated herein include axial and radial power profiles, effective delayed neutron fraction, and mean neutron generation time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Application of MCNP6.2 Unstructured Mesh Geometry Capabilities to the Study of Heavy Ion Single Event Effect on Microelectronic Devices and the Reactor Physics Analysis - 25691

Unstructured meshes allow irregular or complex geometries to be modeled precisely in Monte Carlo radiation transport codes. Through this capability, it is possible to share an unstructured mesh model between multiple codes that use unstructured mesh geometry and thus improving coupled multi-physics simulations. In this work, unstructured meshes are used to model energy deposition from heavy ion strikes for single event effects on microelectronic devices as well as neutron flux mapping of nuclear reactor configurations. In each case, MCNP6.2's unstructured mesh functionality and applicability to the problem is demonstrated and analyzed. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Transient Reactor Physics Experiment with High-Fidelity, 3-D Flux Measurements for Validation and Verification

This project led to the design and construction of a system of novel micro-pocket fission detectors (MPFDs) and their deployment as part of a series of steady-state and transient experiments at the University of Wisconsin Nuclear Reactor (UWNR). The data acquired during these experiments is intended for use in validation of reactor-physics models, including those developed as part of the NEAMS Toolkit (e.g., PROTEUS) and others. Part of the work led to a completely new computational model of UWNR based on Python-automated input generation for both MCNP and Serpent, and preliminary efforts have been made to develop a mesh for models in PROTEUS and other deterministic tools.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reactor physics analysis of a new Accident Tolerant Fuel called Fuel-in-Fibers

Fuel-in-Fibers (F-in-F) is an Accident Tolerant Fuel (ATF) concept aimed at significantly increasing the fission product retention capability of nuclear fuel at high temperatures, similar to another ATF concept, Fully Ceramic Microencapsulated Fuel (FCM). FCM, however, when implemented in a conventional Pressurized Water Reactor (PWR) fuel geometry, is not able to maintain an 18-month fuel cycle length and remain below the proliferation enrichment limit of 20 w/o 235 U using the standard cycle reload strategy. The F-in-F enrichment is decreased by putting the fuel in a cylindrical fiber instead of a spherical particle in order to increase the volume fraction of fuel in the pellet. The fibers are created with a direct manufacturing process that allows for the minimization of the volume occupied by the SiC matrix and the maximization of uranium loading via direct deposition of high density fuels like uranium nitride (UN). The full core reactor physics simulation showed that when the F-in-F design used UN as a fuel, it only required enrichments of 6% to maintain an 18-month fuel cycle length. Based on a full core analysis when compared to the current reference fuel for a standard 4-loop Westinghouse PWR, F-in-F has a similar steady state thermal hydraulic and neutronic performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Study on Reactor Physical Module Method Used in THR Simulator

In order to apply heat in winter 5 MW low temperature nuclear test heating reactor (THR) was designed by Institute of nuclear and new energy technology, Tsinghua University, China. This test reactor is a model for the large-scale nuclear heating reactor (NHR). The primary loop in NHR is integrated nature circulation. Integrated nature circulation improved the safety of the reactor. Under the serious environment problem, the nuclear heat is one of the means of solving the pollution problem in China. So, the study on NHR comes to be important and necessary. The simulator is a good tool to study the transient status and understand the feature in a reactor. There were many studies on the NHR simulator but the point physical model was always selected before. The aim of the work in this paper is to build three dimension reactor physical module which can be used in THR simulator. It is the base for the study on NHR simulator.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reactor Physics Methods and Preconceptual Core Design Analyses for Conversion of the Advanced Test Reactor to Low-Enriched Uranium Fuel Annual Report for Fiscal Year 2012

Under the current long-term DOE policy and planning scenario, both the ATR and the ATRC will be reconfigured at an appropriate time within the next several years to operate with low-enriched uranium (LEU) fuel. This will be accomplished under the auspices of the Reduced Enrichment Research and Test Reactor (RERTR) Program, administered by the DOE National Nuclear Security Administration (NNSA). At a minimum, the internal design and composition of the fuel element plates and support structure will change, to accommodate the need for low enrichment in a manner that maintains total core excess reactivity at a suitable level for anticipated operational needs throughout each cycle while respecting all control and shutdown margin requirements and power distribution limits.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Benchmark Analysis of the HTR-10 with the MAMMOTH Reactor Physics Application

This report documents a set of benchmarks used to validate the Serpent and MAMMOTH neutron transport models of the HTR-10 reactor developed at Idaho National Laboratory. The high-fidelity Serpent Monte Carlo models of the HTR-10 critical and full core configurations include both random, discrete distributions of TRISO particles in the pebbles and random, discrete pebble distributions in the pebble bed core. The Serpent results agree very well with the critical and control rod worth measurements provided in the International Re- actor Physics Experiment Evaluation Project (IRPhEP) report if the ENDF/B-VII.r1 data- set is used. These Serpent models are subsequently used to prepare cross sections and flux tallies in a 10 coarse energy group structure for the MAMMOTH Reactor Physics MOOSE- based application. We find that MAMMOTH can reproduce the Monte Carlo solution for the HTR-10 reactor by using the PJFNK-SPH equivalence method. In all cases studied, the MAMMOTH results are within 120 pcm of the Monte Carlo reference calculation and the maximum errors in neutron absorption and generation rates are within 0.536% and 0.215% from the reference calculation, respectively. A set of benchmark exercises from the International Atomic Energy Agency (IAEA) HTR-10 benchmark in IAEA-TECDOC-1382 were conducted including parts B1 (critical), B2 (temperature coefficient) and B3 (control rod worth). The results we obtain for the critical core are in excellent agreement with the expected value and we confirm that with ENDF/B-VII.r1 data we match the critical eigen- value keff=1 to within 100 pcm. Our temperature coefficient calculation is consistent with the VSOP results generated by the German participants. The Chinese and South African VSOP models produce lower temperature coefficients, a fact that was noted in the original IAEA benchmark, but for which no explanation was provided. Both a full and single control rod worth calculations with Serpent and MAMMOTH agree well with the results from the IAEA benchmark. Finally, and most importantly, this work demonstrates that MAM- MOTH can recover the Monte Carlo high-fidelity solutions to an excellent accuracy using the PJFNK-SPH method. This sets the stage for the ultimate goal of using MAMMOTH in transient, multi-physics scenarios where correction of the cross sections is obtained for steady-state conditions and then used in the transient scenario for which no Monte-Carlo solution is available.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Extending the subspace hybrid method for eigenvalue problems in reactor physics calculation

This paper presents an innovative hybrid Monte-Carlo-Deterministic method denoted by the SUBSPACE method designed for improving the efficiency of hybrid methods for reactor analysis applications. The SUBSPACE method achieves its high computational efficiency by taking advantage of the existing correlations between desired responses. Recently, significant gains in computational efficiency have been demonstrated using this method for source driven problems. Within this work the mathematical theory behind the SUBSPACE method is introduced and extended to address core wide level k-eigenvalue problems. The method's efficiency is demonstrated based on a three-dimensional quarter-core problem, where responses are sought on the pin cell level. The SUBSPACE method is compared to the FW-CADIS method and is found to be more efficient for the utilized test problem because of the reason that the FW-CADIS method solves a forward eigenvalue problem and an adjoint fixed-source problem while the SUBSPACE method only solves an adjoint fixed-source problem. Based on the favorable results obtained here, we are confident that the applicability of Monte Carlo for large scale reactor analysis could be realized in the near future. (authors)

97 MATHEMATICS AND COMPUTING↗

Results of a Neutronic Simulation of HTR-Proteus Core 4.2 using PEBBED and other INL Reactor Physics Tools: FY-09 Report

The Idaho National Laboratory’s deterministic neutronics analysis codes and methods were applied to the computation of the core multiplication factor of the HTR-Proteus pebble bed reactor critical facility. A combination of unit cell calculations (COMBINE-PEBDAN), 1-D discrete ordinates transport (SCAMP), and nodal diffusion calculations (PEBBED) were employed to yield keff and flux profiles. Preliminary results indicate that these tools, as currently configured and used, do not yield satisfactory estimates of keff. If control rods are not modeled, these methods can deliver much better agreement with experimental core eigenvalues which suggests that development efforts should focus on modeling control rod and other absorber regions. Under some assumptions and in 1D subcore analyses, diffusion theory agrees well with transport. This suggests that developments in specific areas can produce a viable core simulation approach. Some corrections have been identified and can be further developed, specifically: treatment of the upper void region, treatment of inter-pebble streaming, and explicit (multiscale) transport modeling of TRISO fuel particles as a first step in cross section generation. Until corrections are made that yield better agreement with experiment, conclusions from core design and burnup analyses should be regarded as qualitative and not benchmark quality.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

IAEA Coordinated Research Project on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis

The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of HTGR design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The predictive capability of coupled neutronics/thermal-hydraulics and depletion simulations for reactor design and safety analysis can be assessed with sensitivity analysis (SA) and uncertainty analysis (UA) methods. Uncertainty originates from errors in physical data, manufacturing uncertainties, modelling and computational algorithms. (The interested reader is referred to the large body of published SA and UA literature for a more complete overview of the various types of uncertainties, methodologies and results obtained). SA is helpful for ranking the various sources of uncertainty and error in the results of core analyses. SA and UA are required to address cost, safety, and licensing needs and should be applied to all aspects of reactor multi-physics simulation. SA and UA can guide experimental, modelling, and algorithm research and development. Current SA and UA rely either on derivative-based methods such as stochastic sampling methods or on generalized perturbation theory to obtain sensitivity coefficients. Neither approach addresses all needs. In order to benefit from recent advances in modelling and simulation and the availability of new covariance data (nuclear data uncertainties) extensive sensitivity and uncertainty studies are needed for quantification of the impact of different sources of uncertainties on the design and safety parameters of HTGRs. Only a parallel effort in advanced simulation and in nuclear data improvement will be able to provide designers with more robust and well validated calculation tools to meet design target accuracies. In February 2009, the Technical Working Group on Gas-Cooled Reactors (TWG-GCR) of the International Atomic Energy Agency (IAEA) recommended that the proposed Coordinated Research Program (CRP) on the HTGR Uncertainty Analysis in Modelling (UAM) be implemented. This CRP is a continuation of the previous IAEA and Organization for Economic Co-operation and Development (OECD)/Nuclear Energy Agency (NEA) international activities on Verification and Validation (V&V) of available analytical capabilities for HTGR simulation for design and safety evaluations. Within the framework of these activities different numerical and experimental benchmark problems were performed and insight was gained about specific physics phenomena and the adequacy of analysis methods.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Report on Reactor Physics Assessment of Candidate Accident Tolerant Fuel Cladding Materials in LWRs

This work focuses on ATF concepts being researched at Oak Ridge National Laboratory (ORNL), expanding on previous studies of using alternate cladding materials in pressurized water reactors (PWRs). The neutronic performance of two leading alternate cladding materials were assessed in boiling water reactors (BWRs): iron-chromium-aluminum (FeCrAl) cladding, and silicon carbide (SiC)-based composite cladding. This report fulfills ORNL Milestone M3FT-15OR0202332 within the fiscal year 2015 (FY15).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗