Search NASA⌕ Search

SEARCH · Search NASA

Results for “Redox Reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

What do Coulombic Efficiency and Capacity Retention Truly Measure? A Deep Dive into Cyclable Lithium Inventory, Limitation Type, and Redox Side Reactions

Here, the battery performance metrics of Coulombic efficiency (CE) and capacity retention (CR) are derived in terms of cycling current and side-reaction currents at each electrode. A cyclable lithium inventory (CLI) framework is developed to explain the fundamental differences between inventory-limited and site-limited cells. The otherwise unmeasurable oxidation and reduction side-reaction currents are expressed in terms of cycling current, CE, and CR for both limitation types. Important conclusions regarding cyclable lithium inventory, limitation type, and the interpretation of CE and CR are discussed. From the framework, CE depends on either the oxidation side-reaction current or the reduction side-reaction current, but not both. CE and CR depend on cell limitation type and are increased by faster cycling. Experiments are presented to support the framework and demonstrate that cells can transition between limitation types. These conclusions are presented in terms of lithium-ion batteries, but this framework may be extended to describe other battery systems.

25 ENERGY STORAGE↗
DOE OSTI2025

In-Situ FTIR Detection of Transition Metal (TM)-Ion Dissolution From Cathodes in Li-Ion Batteries

Transition metal (TM) ions, commonly Ni and Mn, play a crucial role in Li-ion battery cathodes as the reaction centers for rapid redox reactions. A major challenge with TM-based cathodes is capacity degradation, particularly at higher operating voltages. This degradation is closely linked to the dissolution of TMs from the cathode materials and their subsequent deposition on the anode. This process not only modifies the surface structure of the cathode but, more significantly, alters the SEI composition on the anode [1-2]. The dissolution of TMs cations into a liquid electrolyte from cathode materials, such as Mn-ion dissolution from Mn-rich cathode (LMR), is detrimental to the cycling performance of Li-ion batteries [3-4]. Much attention has been paid to this issue but there remains a lack of characterization techniques which can detect the TM-ion dissolution from the cathode during electrochemical measurements. In our study, we use in-situ ATR-FTIR as an effective technique to probe the TM-ion dissolution from the cathode. We have first demonstrated the detrimental effects of TM ions on the electrochemical performance of Li-ion batteries by adding a small amount of TM salt (50 mM Mn(PF6)) to the electrolyte of a Li-ion coin cell with LFP and graphite electrode. We observed a rapid capacity fade after the first delithiation cycle. To investigate TM ion dissolution, we established a baseline IR spectrum for various TM solvation states (such as Mn and Ni) by measuring concentration-dependent IR spectra. This baseline spectrum helps us detect TM ion dissolution during battery cycling. In this work, we discuss in detail the effect of TM ions on the electrochemical performance of Li-ion batteries and the detection of TM ions during battery cycling using in-situ FTIR spectroscopy. We will compare TM dissolution between coated and uncoated cathodes to examine the effect of cathode coatings to mitigate degradation due to TM dissolution and cross-over from cathode to anode. References: (1) Zhan, C.; Wu, T.; Lu, J.; Amine, K. Dissolution, migration, anddeposition of transition metal ions in Li-ion batteries exemplified byMn-based cathodes - a critical review. Energy Environ. Sci. 2018, 11,243-257. (2) Jung, R.; Linsenmann, F.; Thomas, R.; Wandt, J.; Solchenbach,S.; Maglia, F.; Stinner, C.; Tromp, M.; Gasteiger, H. A. Nickel,Manganese, and Cobalt Dissolution from Ni-Rich NMC and TheirEffects on NMC622-Graphite Cells. J. Electrochem. Soc. 2019, 166,A378-A389. (3) Zhao, L.; Chenard, E.; Capraz, O. O.; Sottos, N. R.; White, S.R. Direct Detection of Manganese Ions in Organic Electrolyte by UV-Vis Spectroscopy. J. Electrochem. Soc. 2018, 165, A345-A348 (4) Zhang, Y.; Hu, A.; Xia, D.; Hwang, S.; Sainio, S.; Nordlund, D.;Michel, F. M.; Moore, R. B.; Li, L.; Lin, F. Operando characterization and regulation of metal dissolution and redeposition dynamics nearbattery electrode surface. Nat. Nanotechnol. 2023, 18, 790.

25 ENERGY STORAGE↗
DOE OSTI2023

An exploratory steady–state redox model of photosynthetic linear electron transport for use in complete modelling of photosynthesis for broad applications

A photochemical model of photosynthetic electron transport (PET) is needed to integrate photophysics, photochemistry, and biochemistry to determine redox conditions of electron carriers and enzymes for plant stress assessment and mechanistically link sun-induced chlorophyll fluorescence to carbon assimilation for remotely sensing photosynthesis. Towards this goal, we derived photochemical equations governing the states and redox reactions of complexes and electron carriers along the PET chain. These equations allow the redox conditions of the mobile plastoquinone pool and the cytochrome b 6 f complex (Cyt) to be inferred with typical fluorometry. The equations agreed well with fluorometry measurements from diverse C 3 /C 4 species across environments in the relationship between the PET rate and fraction of open photosystem II reaction centres. We found the oxidation of plastoquinol by Cyt is the bottleneck of PET, and genetically improving the oxidation of plastoquinol by Cyt may enhance the efficiency of PET and photosynthesis across species. Redox reactions and photochemical and biochemical interactions are highly redundant in their complex controls of PET. Although individual reaction rate constants cannot be resolved, they appear in parameter groups which can be collectively inferred with fluorometry measurements for broad applications. The new photochemical model developed enables advances in different fronts of photosynthesis research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Uncovering the Critical Role of Ni on Surface Lattice Stability in Anionic Redox Active Li 1.2 Ni 0.2 Mn 0.6 O 2

Anionic redox reaction (ARR) can provide extra capacity beyond transition metal (TM) redox in lithium-rich TM oxide cathodes. Practical ARR application is much hindered by the structure instability, particularly at the surface. Oxygen release has been widely accepted as the ringleader of surficial structure instability. However, the role of TM in surface stability has been much overlooked, not to mention its interplay with oxygen release. Herein, TM dissolution and oxygen release are comparatively investigated in Li 1.2 Ni 0.2 Mn 0.6 O 2 . Ni is verified to detach from the lattice counter-intuitively despite the overwhelming stoichiometry of Mn, facilitating subsequent oxygen release of the ARR process. Intriguingly, surface reorganization occurs following regulated Ni dissolution, enabling the stabilization of the surface and elimination of oxygen release in turn. Accordingly, a novel optimization strategy is proposed by adding a relaxation step at 4.50 V within the first cycle procedure. Battery performance can be effectively improved, with voltage decay suppressed from 3.44 mV/cycle to 1.60 mV/cycle, and cycle stability improved from 66.77% to 90.01% after 100 cycles. This work provides new perspectives for clarifying ARR surface instability and guidance for optimizing ARR performance.

25 ENERGY STORAGE↗
DOE OSTI2024

Unleashing the Potential of Fast Charging Batteries: Leveraging Anion Redox Chemistry in Ni- and Co-Free Cathodes

Designing Li-ion battery cathodes free from critical raw materials such as Co and Ni has a huge technological and societal impact. Though anion redox-based Li-rich oxide cathodes allow designing Co and Ni free cathode compositions, the Li-rich oxides witnessed voltage fade, voltage hysteresis, and irreversible oxygen release despite their high capacity. Conversely, anion redox through highly covalent chalcogenides (S/Se) is emerging due to the improved covalency between metal d and ligand p bands. Here, we investigate the tuning of multi-chalcogen (S/Se) p-band and redox-active metal d-band in a model Li-rich chalcogen composition Li 1.13 Ti 0.57 Fe 0.3 S 2-y Se y (y = 0 - 1) through in-depth electrochemical, X-ray spectroscopy, and DFT-based electronic structure investigations. Introducing the appropriate amount of Se p band character in anion redox sulfides increases interlayer distance and metal - ligand covalency without modifying the original crystal structure, promoting significant electrochemical reversibility through mixed anionic (Se 2- /Se n- , S 2- /S n- , wherein n<2) and cationic (Fe 2+ /Fe 3+ ) redox reactions. Here we show the detailed Fe, S, and Se redox contributions during Li insertion/extraction through X-ray Absorption (XAS) and Hard X-ray Photoemission Spectroscopy (HAXPES) measurements. The orbital tuning approach improves rate capability for more than 10 C charge-discharge rate, exhibiting more than 50% of its original capacity obtained at C/20 rate. The buffer cation in the lattice (Ti 4+ ) remains electrochemically inactive even after significant Se p-band introduction in the sulfide framework. Overall, this work takes advantage of multi-anion redox chemistry to uncover practically demanding fast charging-discharging characteristics in intercalation cathodes. The obtained knowledge of this design can be extended to other oxide and chalcogen cathodes for high performance Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Unveiling the High-valence Oxygen Degradation Across the Delithiated Cathode Surface

Charge compensation on anionic redox reaction (ARR) has been promising to realize extra capacity beyond transition metal redox in battery cathodes. The practical development of ARR capacity has been hindered by high-valence oxygen instability, particularly at cathode surfaces. However, the direct probe of surface oxygen behavior has been challenging. Here, the electronic states of surface oxygen are investigated by combining mapping of resonant Auger electronic spectroscopy (mRAS) and ambient pressure X-ray photoelectron spectroscopy (APXPS) on a model LiCoO 2 cathode. The mRAS verified that no high-valence oxygen can sustain at cathode surfaces, while APXPS proves that cathode electrolyte interphase (CEI) layer evolves and oxidizes upon oxygen gas contact. In conclusion, this work provides valuable insights into the high-valence oxygen degradation mode across the interface. Oxygen stabilization from surface architecture is proven a prerequisite to the practical development of ARR active cathodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Latticed-Confined Conversion Chemistry of Battery Electrode

The electrochemical conversion reaction, usually featured by multiple redox processes and high specific capacity, holds great promise in developing high energy rechargeable battery technologies. However, the complete structural change accompanied by spontaneous atomic migration and volume variation during the charge/discharge cycle leads to electrode disintegration and performance degradation, therefore severely restricting the application of conventional conversion-type electrodes. Herein, latticed-confined conversion chemistry is proposed, where the “intercalation-like” redox behavior is realized on the electrode with a “conversion-like” high capacity. By delicately formulating the high-entropy compounds, the pristine crystal structure can be preserved by the inert lattice framework, thus enabling an ultra-high initial Coulombic efficiency of 92.5% and a long cycling lifespan over a thousand cycles after the quasistatic charge–discharge cycle. This lattice-confined conversion chemistry unfolds a ubiquitous insight into the localized redox reaction and sheds light on developing high-performance electrodes toward next-generation high-energy rechargeable batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Manganese-Rich Sandstones as an Indicator of Ancient Oxic Lake Water Conditions in Gale Crater, Mars

Manganese has been observed on Mars by the NASA Curiosity rover in a variety of contexts and is an important indicator of redox processes in hydrologic systems on Earth. Within the Murray formation, an ancient primarily fine-grained lacustrine sedimentary deposit in Gale crater, Mars, have observed up to 45× enrichment in manganese and up to 1.5× enrichment in iron within coarser grained bedrock targets compared to the mean Murray sediment composition. This enrichment in manganese coincides with the transition between two stratigraphic units within the Murray: Sutton Island, interpreted as a lake margin environment, and Blunts Point, interpreted as a lake environment. On Earth, lacustrine environments are common locations of manganese precipitation due to highly oxidizing conditions in the lakes. Here, we explore three mechanisms for ferromanganese oxide precipitation at this location: authigenic precipitation from lake water along a lake shore, authigenic precipitation from reduced groundwater discharging through porous sands along a lake shore, and early diagenetic precipitation from groundwater through porous sands. All three scenarios require highly oxidizing conditions and we discuss oxidants that may be responsible for the oxidation and precipitation of manganese oxides. This work has important implications for the habitability of Mars to microbes that could have used Mn redox reactions, owing to its multiple redox states, as an energy source for metabolism.

58 GEOSCIENCES↗
DOE OSTI2024

Manganese-rich sandstones as an indicator of ancient oxic lake water conditions in Gale crater, Mars

Manganese has been observed on Mars by the NASA Curiosity rover in a variety of contexts and is an important indicator of redox processes in hydrologic systems on Earth. Within the Murray formation, an ancient primarily fine-grained lacustrine sedimentary deposit in Gale crater, Mars, have observed up to 45× enrichment in manganese and up to 1.5× enrichment in iron within coarser grained bedrock targets compared to the mean Murray sediment composition. This enrichment in manganese coincides with the transition between two stratigraphic units within the Murray: Sutton Island, interpreted as a lake margin environment, and Blunts Point, interpreted as a lake environment. On Earth, lacustrine environments are common locations of manganese precipitation due to highly oxidizing conditions in the lakes. Here, we explore three mechanisms for ferromanganese oxide precipitation at this location: authigenic precipitation from lake water along a lake shore, authigenic precipitation from reduced groundwater discharging through porous sands along a lake shore, and early diagenetic precipitation from groundwater through porous sands. All three scenarios require highly oxidizing conditions and we discuss oxidants that may be responsible for the oxidation and precipitation of manganese oxides. This work has important implications for the habitability of Mars to microbes that could have used Mn redox reactions, owing to its multiple redox states, as an energy source for metabolism.

58 GEOSCIENCES↗
DOE OSTI2021

Oxygen redox chemistry in P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 cathode for high-energy Na-ion batteries

Owing to the abundance of raw material reserves and low cost, Na-ion batteries (NIBs) have successfully gained widespread attention from academic and industrial communities in the past few decades. However, the insufficient cathode energy density is still one of the critical bottlenecks restricting the development of NIBs. Following a strategy of introducing Li+ into the transition-metal (TM) layer to enhance the oxygen redox reaction, a novel layered cathode material P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 (NLFMO) was designed and successfully synthesized. This NLFMO cathode not only delivers a large initial reversible capacity of 207.3 mA h g -1 , but also shows a good cycling performance (104.2 mA h g -1 after 80 cycles) and rate capability (126.2 mA h g -1 at 1C). The ultrahigh capacity is contributed by both cationic (Fe 3+ /Fe 4+ and Mn 3+ /Mn 4+ ) and partially reversible anionic redox (O 2- /O n- ) reactions, revealed by in situ X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) techniques. Moreover, no detrimental P2–O2 phase transition was observed in ex situ X-ray diffraction (XRD) patterns, confirming the high structural stability during Na + deintercalation/intercalation processes. These results provide valuable information about the high-energy density layered cathode materials based on anionic redox reactions for NIBs.

25 ENERGY STORAGE↗
DOE OSTI2021

LaNi x Fe 1– x O 3–δ as a Robust Redox Catalyst for CO 2 Splitting and Methane Partial Oxidation

The current study reports LaNi 0.5 Fe 0.5 O 3–δ as a robust redox catalyst for CO 2 splitting and methane partial oxidation at relatively low temperatures (~700 °C) in the context of a hybrid redox process. Specifically, perovskite-structured LaNi x Fe 1–x O 3–δ (LNFs) with nine different compositions (x = 0.05–0.5) were prepared and investigated. Among the samples evaluated, LaNi 0.4 Fe 0.6 O 3–δ and LaNi 0.5 Fe 0.5 O 3–δ showed superior redox performance, with ~90% CO 2 and methane conversions and >90% syngas selectivity. The standalone LNFs also demonstrated performance comparable to that of LNF promoted by mixed conductive Ce 0.85 Gd 0.1 Cu 0.05 O 2–δ (CGCO). Long-term testing of LaNi 0.5 Fe 0.5 O 3–δ indicated that the redox catalyst gradually loses its activity over repeated redox cycles, amounting to approximately 0.02% activity loss each cycle, averaged over 500 cycles. This gradual deactivation was found to be reversible by deep oxidation with air. Further characterizations indicated that the loss of activity resulted from a slow accumulation of iron carbide (Fe 3 C and Fe 5 C 2 ) phases, which cannot be effectively removed during the CO 2 splitting step. Reoxidation with air removed the carbide phases, increased the availability of Fe for the redox reactions via solid-state reactions with La 2 O 3 , and decreased the average crystallite size of La 2 O 3 . As a result, reactivating the redox catalyst periodically, e.g., once every 40 cycles, was shown to be highly effective, as confirmed by operating the redox catalyst over 900 cumulative cycles while maintaining satisfactory redox performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Proton-coupled electron transfer across benzimidazole bridges in bioinspired proton wires

Designing molecular platforms for controlling proton and electron movement in artificial photosynthetic systems is crucial to efficient catalysis and solar energy conversion. The transfer of both protons and electrons during a reaction is known as proton-coupled electron transfer (PCET) and is used by nature in myriad ways to provide low overpotential pathways for redox reactions and redox leveling, as well as to generate bioenergetic proton currents. Herein, we describe theoretical and electrochemical studies of a series of bioinspired benzimidazole-phenol (BIP) derivatives and a series of dibenzimidazole-phenol (BI 2 P) analogs with each series bearing the same set of terminal proton-accepting (TPA) groups. The set of TPAs spans more than 6 pK a units. These compounds have been designed to explore the role of the bridging benzimidazole(s) in a one-electron oxidation process coupled to intramolecular proton translocation across either two (the BIP series) or three (the BI 2 P series) acid/base sites. These molecular constructs feature an electrochemically active phenol connected to the TPA group through a benzimidazole-based bridge, which together with the phenol and TPA group form a covalent framework supporting a Grotthuss-type hydrogen-bonded network. Infrared spectroelectrochemistry demonstrates that upon oxidation of the phenol, protons translocate across this well-defined hydrogen-bonded network to a TPA group. The experimental data show the benzimidazole bridges are non-innocent participants in the PCET process in that the addition of each benzimidazole unit lowers the redox potential of the phenoxyl radical/phenol couple by 60 mV, regardless of the nature of the TPA group. Using a series of hypothetical thermodynamic steps, density functional theory calculations correctly predicted the dependence of the redox potential of the phenoxyl radical/phenol couple on the nature of the final protonated species and provided insight into the thermodynamic role of dibenzimidazole units in the PCET process. This information is crucial for developing molecular “dry proton wires” with these moieties, which can transfer protons via a Grotthuss-type mechanism over long distances without the intervention of water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Fe-single atom catalysts facilitate fast electron transfer with MoS 2 /SnS 2 cathodes in lithium–sulfur batteries

Lithium–sulfur batteries (LSBs) emerge as promising next-generation energy storage systems offering cost-effectiveness, environmental friendliness, and high theoretical energy density. The practical implementation of LSBs faces significant hindrances due to the shuttle effect and sluggish redox reactions. To address these challenges, single-atom catalyst (SAC) based combination materials from d-block elements can offer increased active catalytic sites, rapid charge transfer, accelerated electron migration, and fast sulfur redox conversion kinetics of lithium polysulfides (LiPSs). In this study, we fabricated three different LSB cathodes: pure S, S@MoS 2 /SnS 2 , and S@Fe–MoS 2 /SnS 2 . These cathodes were then used to explore the cycle life, capacity, rate capability, and redox kinetic reactions of LiPSs while assessing the influence of Fe-SACs on their performance. As a result, LSBs with S@Fe–MoS 2 /SnS 2 cathodes demonstrate an extended cycle life of 1000 cycles at a C-rate of 0.2C, maintaining a capacity close to 500 mA h g −1 , the highest initial discharge capacity of 1622 mA h g −1 and 1066 mA h g −1 at 0.05C and 0.2C, and excellent rate capabilities of 708 mA h g −1 and 558 mA h g −1 at 1C and 2C, respectively. The synergistic effect of the Fe-SAC-based combination cathode (S@Fe–MoS 2 /SnS 2 ) creates plentiful adsorptive and highly active catalytic sites, resulting in substantially enhanced capacity for adsorbing soluble long-chain LiPSs. This facilitates ultra-fast redox kinetics, surpassing the performance of the S@MoS 2 /SnS 2 and pure S cathodes. In the ex situ analysis, results from powder X-ray diffraction (XRD) to observe the new phase, soft X-ray absorption spectroscopy (XAS) to investigate the electronic structure, and hard X-ray photoelectron microscopy (HAXPES) with different energies (900 eV, 2000 eV, and 6000 eV) to track the chemical-state evolution of Fe-SACs in MoS 2 /SnS 2 cathodes displayed notable electrochemical reversibility involving S 8 ⇄ LiPSs ⇄ Li 2 S conversion even after 1000 cycles. Additionally, in situ, operando Raman analysis can unveil a novel catalytic mechanism of Fe-SACs in MoS 2 /SnS 2 “facilitating rapid electron transfer” during the discharge and charge processes of LSBs involving the conversion of S 8 ⇄ long-chain LiPSs ⇄ Li 2 S 2 /Li 2 S. This study elucidates the working mechanism of Fe-SAC cathodes, offering insights into overcoming the shuttle effect and facilitating sulfur redox kinetics to advance commercial LSBs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

CeTi 2 O 6 —A Promising Oxide for Solar Thermochemical Hydrogen Production

A large entropy of reduction is crucial in achieving materials capable of high-efficiency solar thermochemical hydrogen (STCH) production through two-step thermochemical water splitting cycles. We have recently demonstrated that the onsite electronic entropy of reduction attains an extreme value of 4.26 kB at 1500 K in Ce 4+ → Ce 3+ redox reactions, which explains the high performance and uniqueness of CeO 2 as an archetypal STCH material. However, ceria requires high temperatures (T > 1500 °C) to achieve a reasonable reduction extent because of its large reduction enthalpy, which is a major obstacle in practical applications. Therefore, new materials with a large entropy of reduction and lower reduction enthalpy are required. Here, we perform a systematic screening to search for Ce 4+ -based oxides which possess thermodynamics superior to CeO 2 for STCH production. We first search the Inorganic Crystal Structure Database (ICSD) and literature for Ce 4+ -based oxides and subsequently use density functional theory to compute their reduction enthalpies (i.e., oxygen vacancy formation energies). Here, we find that CeTi 2 O 6 with the brannerite structure is the most promising candidate for STCH because it possesses three essential characteristics of an STCH material: (i) a smaller reduction enthalpy compared to ceria yet large enough to split water, (ii) a high thermal stability, as reported experimentally, and (iii) a large entropy of reduction associated with Ce 4+ → Ce 3+ redox. Our proposed design strategy suggests that further exploration of Ce 4+ oxides for STCH production is warranted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Aqueous TiO 2 Nanoparticles React by Proton-Coupled Electron Transfer

Redox reactions of aqueous colloidal TiO 2 4 nm nanoparticles (NPs) have been examined, including both citratecapped and uncapped NPs (c-TiO 2 and uc-TiO 2 ). Photoreduction gave stable blue colloidal c-TiO 2 R NPs with 10–60 electrons per particle. Equilibration of these reduced NPs with soluble redox reagents such as methylviologen (MV 2+ ) provided measurements of the colloid reduction potential as a function of pH. The potentials of c-TiO 2 from pH 2–9 varied linearly with pH, with a slope of –60 ± 5 mV/pH. Estimates of the potential at pH 12 were consistent with extrapolating that line to high pH. The reduction potentials did not correlate with the zeta potentials (ζ) or the surface charge of the NPs across this pH range. Similar reduction potentials were observed for c- and uc-TiO 2 at low pH even though they have quite different ζ potentials. These results show that the common surface-charging explanation of the pH dependence is not tenable in these systems. Oxidation of reduced c-TiO 2 R with the electron-transfer oxidant potassium triiodide (KI 3 ) occurred with a significant drop in pH, showing that protons were released when the electrons were removed from the NPs. Smaller pH drops were observed for the proton-coupled electron transfer (PCET) reagents O 2 (air) and 4-MeO-TEMPO (4-methoxy-2,2,6,6-tetramethylpiperine-1-oxy radical). The difference in the number of protons released with KI 3 vs O 2 and 4-MeO-TEMPO was roughly one proton per electron removed. Thus, the thermodynamically preferred reactivity of these colloidal TiO 2 NPs is PCET over the pH 2–13 range studied. The measured redox potentials refer to the chemical process TiO 2 + H + + e – → TiO 2 ·e – ,H + ; and therefore they do not correspond with an electronic energy such as a conduction band edge or flat band potential. The 1e – /1H + stoichiometry means that the TiO 2 reduction potentials correspond to a TiO 2 –H bond dissociation free energy (BDFE), determined to be 49 ± 2 kcal mol –1 . The PCET description is consistent with the pH dependence of E(TiO 2 /TiO 2 ·e – ,H + ), the release of protons upon oxidation, the lack of correlation with ζ potentials, the similarity of capped and uncapped NPs, and the small change in the potential and BDFE from the first to the last electron/proton pair (H atom) removed. Furthermore, this behavior is suggested to be the norm for redox-active oxide/water interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrochemically-assisted removal of cadmium ions by redox active Cu-based metal-organic framework

An electrochemically-assisted wastewater treatment using Faradaic materials offers a promising technique for the selective removal of hazardous substances. Here, we demonstrate the reversible capture and release of cadmium ions in aqueous solutions, using a redox-active metal-organic framework (MOF) electrode. As-synthesized copper-based MOF (Cu-MOF-74; copper 2,5-dihydroxyterephthalate) is a highly attractive candidate for Faradaic electrosorption due to its large surface area, water stability, and redox-active metal nodes. Our work demonstrates the reversible capture and release of Cd 2+ ions assisted by the electrochemical redox reaction of Cu 2+ /Cu + within the MOF structure. Combined material characterization and electrosorption tests were carried out to determine the operational conditions for maximizing adsorption capacity, energy efficiency, and material stability, thus leading to excellent electrosorption (>100 mg g -1 ) and regeneration efficiency (>90%). This study demonstrates the feasibility of leveraging MOFs containing redox-active metal nodes for the selective separation of toxic cations, and paves the way for promising future applications of these 3-D porous structures for wastewater treatment and environmental remediation.

42 ENGINEERING↗
DOE OSTI2021

Effective kinetics driven by dynamic concentration gradients under coupled transport and reaction

Biogeochemical reaction kinetics are generally established from batch reactors where concentrations are uniform. In natural systems, many biogeochemical processes are characterized by spatially and temporally variable concentration gradients that often occur at scales which are not resolved by field measurements or biogeochemical and reactive transport models. Yet, it is not clear how these sub-scale chemical gradients affect reaction kinetics compared to batch kinetics. Here we investigate this question by studying the paradigmatic case of localized pulses of solute reacting with a solid or a dissolved species in excess. Additionally, we consider non-linear biogeochemical reactions, representative of mineral dissolution, adsorption and redox reactions, which we quantify using simplified power-law kinetics. The combined effect of diffusion and reaction leads to effective kinetics that differ quantitatively and qualitatively from the batch kinetics. Depending on the nonlinearity (reaction order) of the local kinetics, these effects lead to either enhancement or decrease of the overall reaction rate, and result in a rich variety of reaction dynamics. We derive analytical results for the effective kinetics, which are validated by comparison to direct numerical simulations for a broad range of Damköhler numbers and reaction order. Our findings provide new insights into the interpretation of imperfectly mixed lab experiments, the effective kinetics of field systems characterized by intermittent reactant release and the integration of sub-scale concentration gradients in reactive transport models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗