SEARCH · Search NASA

Results for “Regression model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Determining the response of sea level to atmospheric pressure forcing using TOPEX/POSEIDON data

The static response of sea level to the forcing of atmospheric pressure, the so-called inverted barometer (IB) effect, is investigated using TOPEX/POSEIDON data. This response, characterized by the rise and fall of sea level to compensate for the change of atmospheric pressure at a rate of -1 cm/mbar, is not associated with any ocean currents and hence is normally treated as an error to be removed from sea level observation. Linear regression and spectral transfer function analyses are applied to sea level and pressure to examine the validity of the IB effect. In regions outside the tropics, the regression coefficient is found to be consistently close to the theoretical value except for the regions of western boundary currents, where the mesoscale variability interferes with the IB effect. The spectral transfer function shows near IB response at periods of 30 degrees is -0.84 +/- 0.29 cm/mbar (1 standard deviation). The deviation from = 1 cm /mbar is shown to be caused primarily by the effect of wind forcing on sea level, based on multivariate linear regression model involving both pressure and wind forcing. The regression coefficient for pressure resulting from the multivariate analysis is -0.96 +/- 0.32 cm/mbar. In the tropics the multivariate analysis fails because sea level in the tropics is primarily responding to remote wind forcing. However, after removing from the data the wind-forced sea level estimated by a dynamic model of the tropical Pacific, the pressure regression coefficient improves from -1.22 +/- 0.69 cm/mbar to -0.99 +/- 0.46 cm/mbar, clearly revealing an IB response. The result of the study suggests that with a proper removal of the effect of wind forcing the IB effect is valid in most of the open ocean at periods longer than 20 days and spatial scales larger than 500 km.

Fu, Lee-Lueng↗

NASA NTRS1992

A new model for estimating total body water from bioelectrical resistance

Estimation of total body water (T) from bioelectrical resistance (R) is commonly done by stepwise regression models with height squared over R, H(exp 2)/R, age, sex, and weight (W). Polynomials of H(exp 2)/R have not been included in these models. We examined the validity of a model with third order polynomials and W. Methods: T was measured with oxygen-18 labled water in 27 subjects. R at 50 kHz was obtained from electrodes placed on the hand and foot while subjects were in the supine position. A stepwise regression equation was developed with 13 subjects (age 31.5 plus or minus 6.2 years, T 38.2 plus or minus 6.6 L, W 65.2 plus or minus 12.0 kg). Correlations, standard error of estimates and mean differences were computed between T and estimated T's from the new (N) model and other models. Evaluations were completed with the remaining 14 subjects (age 32.4 plus or minus 6.3 years, T 40.3 plus or minus 8 L, W 70.2 plus or minus 12.3 kg) and two of its subgroups (high and low) Results: A regression equation was developed from the model. The only significant mean difference was between T and one of the earlier models. Conclusion: Third order polynomials in regression models may increase the accuracy of estimating total body water. Evaluating the model with a larger population is needed.

Siconolfi, S. F.↗

NASA NTRS1975

Plant, soil, and shadow reflectance components of row crops

Data from the first Earth Resource Technology Satellite (LANDSAT-1) multispectral scanner (MSS) were used to develop three plant canopy models (Kubelka-Munk (K-M), regression, and combined K-M and regression models) for extracting plant, soil, and shadow reflectance components of cropped fields. The combined model gave the best correlation between MSS data and ground truth, by accounting for essentially all of the reflectance of plants, soil, and shadow between crop rows. The principles presented can be used to better forecast crop yield and to estimate acreage.

Richardson, A. J.↗

NASA NTRSDate not supplied

BEAST: Expanding Sustainable Data Infrastructure for High-Enthalpy Facilities

Reproducible, data-driven thermal protection system (TPS) research requires that experimental records from high-enthalpy testing be consistently structured, traceable, and accessible across campaigns and institutions. In practice, however, arcjet and plasma facilities data remain largely fragmented: raw diagnostics are stored in ad hoc formats, material sample histories are disconnected from test conditions, and metadata standards are absent, precluding systematic cross-campaign analysis and long-term reuse. BEAST (Backend for Experiment Analysis, Storage, and Traceability) is an open-source, web-based platform that addresses these limitations by providing a unified, queryable infrastructure for high-enthalpy ground-test data [1]. First presented at the 15th Ablation Workshop [2], BEAST has since undergone significant development. The platform ingests and structures multi-channel time-series diagnostics, facility configurations, and material property records within a common provenance model, ensuring end-to-end traceability from raw sensor acquisition to reduced experimental quantities. A versioned material library links specimen identity and processing history to the specific runs in which each sample was tested. An integrated modeling workbench enables training and evaluation of regression models directly on archived experimental data, supporting condition interpolation and the construction of empirical material response databases. Beyond its original deployment at NASA Ames Research Center, BEAST has been designed to be facility-agnostic, with ongoing efforts to extend its adoption to other facilities. Its modular architecture accommodates heterogeneous diagnostic setups and facility types, and its future open-source distribution allows institutions to build on a common data standard rather than maintaining isolated, bespoke solutions. BEAST is further integrated within a broader ecosystem of companion tools: arcjetCV [3] extracts recession rates and shock standoff distances from high-speed video using computer vision, and miniSTARscan [4] provides sub-minute, portable photogrammetric surface reconstruction of test articles before and after exposure. All tools share a common data schema, enabling seamless ingestion of surface geometry, imagery, and time-series data into a single, coherent experimental record.

Database↗

NASA NTRSDate not supplied

BEAST: Expanding Sustainable Data Infrastructure for High-Enthalpy Facilities

Database↗

NASA NTRS2021

Flood Monitoring and Crop Damage Assessment

In recent years, the occurrence and impact of inland and coastal flood events have become more frequent and damaging, especially within agricultural fields, due to the global climate change and consistent sea level rise. Monitoring and measuring the magnitude of flood events in a timely manner and assessing the subsequent crop damages accurately are precursors in minimizing detrimental consequences that could potentially lead to a global food security crisis. Traditional gauge-based measurements with sophisticated hydrological models are capable of monitoring flood events precisely but limited within the smaller spatial extent, time-consuming, and costly. In recent decades, advancement in airborne- and satellite-based remote sensing technologies offering products at a daily global spatial extent with various spectral resolution helps address the shortcomings of the traditional in situ approaches in flood monitoring. Furthermore, the methods such as classification and band ratioing using remote sensing products are simple and effective in assessing flood-induced agricultural damages. The combination of remote sensing products and geographic information systems along with the current development in web mapping, users now can get near real-time flood monitoring and crop damage assessments, albeit dependent upon the quality of available data. A case study to quantify the impact of the 2011 Missouri Mississippi River flooding on the surrounding cornfield was performed through a regression model. The model was trained using historical daily NDVI and corn yield across Nebraska and Missouri, and the overall accuracy in estimating corn yield was about 90%. The method implemented in this localized case study could be extended at a larger geographical scale.

Flood monitoring↗

NASA NTRS2002

Kernel Partial Least Squares for Nonlinear Regression and Discrimination

This paper summarizes recent results on applying the method of partial least squares (PLS) in a reproducing kernel Hilbert space (RKHS). A previously proposed kernel PLS regression model was proven to be competitive with other regularized regression methods in RKHS. The family of nonlinear kernel-based PLS models is extended by considering the kernel PLS method for discrimination. Theoretical and experimental results on a two-class discrimination problem indicate usefulness of the method.

Rosipal, Roman↗

NASA NTRS2021

Extreme Lows of Wheat Production in Brazil

Wheat production in Brazil is insufficient to meet domestic demand and falls drastically in response to adverse climate events. Multiple, agro-climate-specific regression models, quantifying regional production variability, were combined to estimate national production based on past climate, cropping area, trend-corrected yield, and national commodity prices. Projections with five CMIP6 climate change models suggest extremes of low wheat production historically occurring once every 20 years would become up to 90% frequent by the end of this century, depending on representative concentration pathway, magnified by wheat and in some cases by maize price fluctuations. Similar impacts can be expected for other crops and in other countries. This drastic increase in frequency in extreme low crop production with climate change will threaten Brazil's and many other countries progress toward food security and abolishing hunger.

Brazil↗

NASA NTRS1984

Soil temperature extrema recovery rates after precipitation cooling

From a one dimensional view of temperature alone variations at the Earth's surface manifest themselves in two cyclic patterns of diurnal and annual periods, due principally to the effects of diurnal and seasonal changes in solar heating as well as gains and losses of available moisture. Beside these two well known cyclic patterns, a third cycle has been identified which occurs in values of diurnal maxima and minima soil temperature extrema at 10 cm depth usually over a mesoscale period of roughly 3 to 14 days. This mesoscale period cycle starts with precipitation cooling of soil and is followed by a power curve temperature recovery. The temperature recovery clearly depends on solar heating of the soil with an increased soil moisture content from precipitation combined with evaporation cooling at soil temperatures lowered by precipitation cooling, but is quite regular and universal for vastly different geographical locations, and soil types and structures. The regularity of the power curve recovery allows a predictive model approach over the recovery period. Multivariable linear regression models alloy predictions of both the power of the temperature recovery curve as well as the total temperature recovery amplitude of the mesoscale temperature recovery, from data available one day after the temperature recovery begins.

Welker, J. E.↗

NASA NTRS1999

The Fringe-Imaging Skin Friction Technique PC Application User's Manual

A personal computer application (CXWIN4G) has been written which greatly simplifies the task of extracting skin friction measurements from interferograms of oil flows on the surface of wind tunnel models. Images are first calibrated, using a novel approach to one-camera photogrammetry, to obtain accurate spatial information on surfaces with curvature. As part of the image calibration process, an auxiliary file containing the wind tunnel model geometry is used in conjunction with a two-dimensional direct linear transformation to relate the image plane to the physical (model) coordinates. The application then applies a nonlinear regression model to accurately determine the fringe spacing from interferometric intensity records as required by the Fringe Imaging Skin Friction (FISF) technique. The skin friction is found through application of a simple expression that makes use of lubrication theory to relate fringe spacing to skin friction.

Zilliac, Gregory G.↗

NASA NTRS2009

Fault Diagnostics and Prognostics for Large Segmented SRMs

We report progress in development of the fault diagnostic and prognostic (FD&P) system for large segmented solid rocket motors (SRMs). The model includes the following main components: (i) 1D dynamical model of internal ballistics of SRMs; (ii) surface regression model for the propellant taking into account erosive burning; (iii) model of the propellant geometry; (iv) model of the nozzle ablation; (v) model of a hole burning through in the SRM steel case. The model is verified by comparison of the spatially resolved time traces of the flow parameters obtained in simulations with the results of the simulations obtained using high-fidelity 2D FLUENT model (developed by the third party). To develop FD&P system of a case breach fault for a large segmented rocket we notice [1] that the stationary zero-dimensional approximation for the nozzle stagnation pressure is surprisingly accurate even when stagnation pressure varies significantly in time during burning tail-off. This was also found to be true for the case breach fault [2]. These results allow us to use the FD&P developed in our earlier research [3]-[6] by substituting head stagnation pressure with nozzle stagnation pressure. The axial corrections to the value of the side thrust due to the mass addition are taken into account by solving a system of ODEs in spatial dimension.

Luchinsky, Dmitry↗

NASA NTRS1994

Empirical Modeling of Plant Gas Fluxes in Controlled Environments

As humans extend their reach beyond the earth, bioregenerative life support systems must replace the resupply and physical/chemical systems now used. The Controlled Ecological Life Support System (CELSS) will utilize plants to recycle the carbon dioxide (CO2) and excrement produced by humans and return oxygen (O2), purified water and food. CELSS design requires knowledge of gas flux levels for net photosynthesis (PS(sub n)), dark respiration (R(sub d)) and evapotranspiration (ET). Full season gas flux data regarding these processes for wheat (Triticum aestivum), soybean (Glycine max) and rice (Oryza sativa) from published sources were used to develop empirical models. Univariate models relating crop age (days after planting) and gas flux were fit by simple regression. Models are either high order (5th to 8th) or more complex polynomials whose curves describe crop development characteristics. The models provide good estimates of gas flux maxima, but are of limited utility. To broaden the applicability, data were transformed to dimensionless or correlation formats and, again, fit by regression. Polynomials, similar to those in the initial effort, were selected as the most appropriate models. These models indicate that, within a cultivar, gas flux patterns appear remarkably similar prior to maximum flux, but exhibit considerable variation beyond this point. This suggests that more broadly applicable models of plant gas flux are feasible, but univariate models defining gas flux as a function of crop age are too simplistic. Multivariate models using CO2 and crop age were fit for PS(sub n), and R(sub d) by multiple regression. In each case, the selected model is a subset of a full third order model with all possible interactions. These models are improvements over the univariate models because they incorporate more than the single factor, crop age, as the primary variable governing gas flux. They are still limited, however, by their reliance on the other environmental conditions under which the original data were collected. Three-dimensional plots representing the response surface of each model are included. Suitability of using empirical models to generate engineering design estimates is discussed. Recommendations for the use of more complex multivariate models to increase versatility are included.

Cornett, Jessie David↗

NASA NTRSDate not supplied

Exploring Flooded Fraction Prediction through Machine Learning Models Focusing on Medical Infrastructure in the Southeast U.S. Coastal Areas

Rising sea levels due to climate change increasingly threaten medical infrastructure through flooding. This study develops machine learning models to predict flood exposure for 11,508 medical facilities in the southeastern coastal regions of the United States by integrating datasets including meteorological, hydrological, topographic, and geological data, the Natural Risk Index, and historical flood records from NASA, HIFLD, and FEMA. Six regression models, namely Linear Regression, Support Vector Regression, Random Forest, k-Nearest Neighbors, XGBoost, and Artificial Neural Networks, are trained using 16 explanatory variables identified through literature review and correlation analysis. Data preprocessing employs the SMOGN for class imbalance and Winsorization for outliers. Model performance is evaluated using MAE, MSE, and RMSE, with Random Forest and XGBoost models achieving the highest performance (MSE of 2.58e-5 and 3.69e-5, respectively). This multifactorial approach allows the models to capture complex flood-influencing relationships, enhancing adaptability and performance across geographic regions. Future work focuses on expanding across the U.S. and developing a near real-time flood monitoring system.

Jihoon Chung↗

NASA NTRS2020

Review: Strategies for Using Satellite-Based Products in Modeling PM2.5 and Short-Term Pollution Episodes

Short-term air pollution episodes motivate improved understanding of the association between air pollution and acute morbidity and mortality episodes, and triggers required mitigation plans. A variety of methods have been employed to estimate exposure to air pollution episodes, including GIS-based dispersion models, interpolation between sparse monitoring sites, land-use regression models, optimization models, line- or area-dispersion plume models, and models using information from imaging satellites, often including land-use and meteorological variables. There has been increasing use of satellite-borne aerosol products for assessing short-term air quality events. They provide better spatial coverage, but currently at the price of low temporal coverage and rather crude spatial resolution. This brief review of using satellite data for modeling short-term air quality and pollution events. The review can be pursued as a practical guide for modeling air quality with satellite-based products, as it includes important questions that should be considered in both the study design as well as the model development stages. Progress in this field is detailed and includes published models and their use in environmental and health studies. Both current and future satellite-borne capabilities are covered. It also provides links to access and download relevant datasets and some R code for data processing and modeling.

Meytar Sorek-Hamer↗

NASA NTRS2020

A Statistical Model to Predict the Extratropical Transition of Tropical Cyclones

This paper introduces a logistic regression model for the extratropical transition(ET) of tropical cyclones in the North Atlantic and the Western North Pacific, using elastic net regularization to select predictors and estimate coefficients.Predictors are chosen from the 1979-2017 best track and reanalysis datasets, and verification is done against the tropical/extratropical labels in the best track data. In an independent test set, the model skillfully predicts ET at lead times up to two days, with latitude and sea surface temperature as its most important predictors. At a lead time of 24 h, it predicts ET with a Matthews correlation coefficient of 0.4 in the North Atlantic, and 0.6 in the Western North Pacific. It identifies 80% of storms undergoing ET in the North Atlantic, and 92% of those in the Western North Pacific. 90% of transition time errors are less than 24 h. Select examples of the model's performance on individual storms illustrate its strengths and weaknesses.Two versions of the model are presented: an "operational model" that may provide baseline guidance for operational forecasts, and a "hazard model"that can be integrated into statistical TC risk models. As instantaneous diagnostics for tropical/extratropical status, both models' zero lead time predictions perform about as well as the widely used Cyclone Phase Space (CPS) in the Western North Pacific and better than the CPS in the North Atlantic, and predict the timings of the transitions better than CPS in both basins.

Melanie Bieli↗

NASA NTRS1984

Exploring the use of structural models to improve remote sensing agricultural estimates

Satellite estimates of agricultural characteristics often are not sufficiently precise for reliable use in small geographical regions. The precision of estimates of agricultural characteristics such as crop proportions and leaf area indexes can be increased by modeling ground observations as a function of satellite estimates. Linear regression models using least squares estimators of the model parameters are most often advocated as an appropriate methodology; however, least squares estimation requires that the predictor variables are measured without error, an unreasonable assumption for this application. An alternative estimation methodology which assumes that both the response variables (ground observations) and the predictor variables (satellite estimates) are measured with error involves the use of linear structural models. The application of linear structural models to the estimation of agricultural characteristics using satellite spectral measurements is examined.

Gunst, R. F.↗

NASA NTRS2014

A New Hybrid Spatio-temporal Model for Estimating Daily Multi-year PM2.5 Concentrations Across Northeastern USA Using High Resolution Aerosol Optical Depth Data

The use of satellite-based aerosol optical depth (AOD) to estimate fine particulate matter PM(sub 2.5) for epidemiology studies has increased substantially over the past few years. These recent studies often report moderate predictive power, which can generate downward bias in effect estimates. In addition, AOD measurements have only moderate spatial resolution, and have substantial missing data. We make use of recent advances in MODIS satellite data processing algorithms (Multi-Angle Implementation of Atmospheric Correction (MAIAC), which allow us to use 1 km (versus currently available 10 km) resolution AOD data.We developed and cross validated models to predict daily PM(sub 2.5) at a 1X 1 km resolution across the northeastern USA (New England, New York and New Jersey) for the years 2003-2011, allowing us to better differentiate daily and long term exposure between urban, suburban, and rural areas. Additionally, we developed an approach that allows us to generate daily high-resolution 200 m localized predictions representing deviations from the area 1 X 1 km grid predictions. We used mixed models regressing PM(sub 2.5) measurements against day-specific random intercepts, and fixed and random AOD and temperature slopes. We then use generalized additive mixed models with spatial smoothing to generate grid cell predictions when AOD was missing. Finally, to get 200 m localized predictions, we regressed the residuals from the final model for each monitor against the local spatial and temporal variables at each monitoring site. Our model performance was excellent (mean out-of-sample R(sup 2) = 0.88). The spatial and temporal components of the out-of-sample results also presented very good fits to the withheld data (R(sup 2) = 0.87, R(sup)2 = 0.87). In addition, our results revealed very little bias in the predicted concentrations (Slope of predictions versus withheld observations = 0.99). Our daily model results show high predictive accuracy at high spatial resolutions and will be useful in reconstructing exposure histories for epidemiological studies across this region.

Air pollution↗

NASA NTRS1974

Geometrical geodesy techniques in Goddard earth models

The method for combining geometrical data with satellite dynamical and gravimetry data for the solution of geopotential and station location parameters is discussed. Geometrical tracking data (simultaneous events) from the global network of BC-4 stations are currently being processed in a solution that will greatly enhance of geodetic world system of stations. Previously the stations in Goddard earth models have been derived only from dynamical tracking data. A linear regression model is formulated from combining the data, based upon the statistical technique of weighted least squares. Reduced normal equations, independent of satellite and instrumental parameters, are derived for the solution of the geodetic parameters. Exterior standards for the evaluation of the solution and for the scale of the earth's figure are discussed.

Lerch, F. J.↗