Search NASA⌕ Search

SEARCH · Search NASA

Results for “Remote Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

In-flight radiometric calibration of advanced remote sensing systems

Several methods for the in-flight calibration of advanced remote sensing systems are reviewed. Pre-flight and in-flight detector-based calibration are discussed. Calibration by reference to instrumented ground targets is suggested for current systems. Preliminary data are presented on the accuracy and sensitivity required of measurements of ground targets and the atmosphere between the targets and the sensor to achieve an uncertainty in absolute terms of less than + or - 3 percent in the calibration of Landsat-4 systems.

Kastner, C. J.↗
NASA NTRS1989

A comparison of the Shuttle remote manipulator system and the Space Station Freedom mobile servicing center

The Shuttle Remote Manipulator System is a mature system which has successfully completed 18 flights. Its primary functional design driver was the capability to deploy and retrieve payloads from the Orbiter cargo bay. The Space Station Freedom Mobile Servicing Center is still in the requirements definition and early design stage. Its primary function design drivers are the capabilities: to support Space Station construction and assembly tasks; to provide external transportation about the Space Station; to provide handling capabilities for the Orbiter, free flyers, and payloads; to support attached payload servicing in the extravehicular environment; and to perform scheduled and un-scheduled maintenance on the Space Station. The differences between the two systems in the area of geometric configuration, mobility, sensor capabilities, control stations, control algorithms, handling performance, end effector dexterity, and fault tolerance are discussed.

Taylor, Edith C.↗
NASA NTRS1993

A role for AVIRIS in the Landsat and Advanced Land Remote Sensing Systems program

As a calibrated imaging spectrometer flying at a 20 km altitude, AVIRIS may contribute to the Landsat and the Advanced Land Remote Sensing System efforts. These contributions come in the areas of: (1) on-orbit calibration, (2) specification of new spectral bands, (3) validation of algorithms, and (4) investigation of an imaging spectrometer of the Advanced Land Remote Sensing System.

Green, Robert O.↗
NASA NTRS1993

A Role for AVIRIS in the Landsat and Advanced Land Remote Sensing System Program

As a calibrated imaging spectrometer flying at a 20 km altitude, AVIRIS may contribute to the Landsat and the Advanced Land Remote Sensing System efforts. These contributions come in the areas of: 1) on-orbit calibration, 2) specification of new spectral bands, 3) validation of algorithms and 4) investigation of an imaging spectrometer for the Advance Land Remote Sensing System.

AVIRIS↗
NASA NTRS1980

Shuttle remote manipulator system hardware test facility

The shuttle remote manipulator (RMS) is designed and built for operations in a zero gravity environment. As such, the ground test facility for the integrated RMS must simulate conditions which support verification of the overall system performance. In order to allow ground test operations, a test facility was constructed with an area of 60 ft. x 120 ft. and extremely tight tolerances on floor flatness and slope. An air bearing support structure was designed for the RMS to operate with 4 degrees of freedom. The RMS system test facility and systems tests conducted to date are described.

Wagner-Bartak, C. G.↗
NASA NTRS1986

Noise in remote-sensing systems - The effect on classification error

Several types of noise in remote-sensing systems are treated. The purpose is to provide enhanced understanding of the relationship of noise sources to both analysis results and sensor design. The context of optical sensors and spectral pattern recognition analysis methods is used to enable tractability for quantitative results. First, the concept of multispectral classification is reviewed. Next, stochastic models are discussed for both signals and noise, including thermal, shot and quantization noise along with atmospheric effects. A model enabling the study of the combined effect of these sources is presented, and a system performance index is defined. Theoretical results showing the interrelated effects of the noise sources on system performance are given. Results of simulations using the system model are presented for several values of system parameters, using some noise parameters of the Thematic Mapper scanner as an illustration. Results show the relative importance of each of the noise sources on system performance, including how sensor noise interacts with atmospheric effects to degrade accuracy.

Landgrebe, D. A.↗
NASA NTRS1991

Active vibration damping of the Space Shuttle Remote Manipulator System

The feasibility of providing active damping augmentation of the Space Shuttle Remote Manipulator System (RMS) following normal payload-handling operations is investigated. The approach used in the analysis is described and the results from both linear and nonlinear performance analyses of candidate laws are presented, demonstrating that significant improvement in the RMS dynamic response can be achieved through active control using measured RMS tip acceleration data for feedback.

Scott, Michael A.↗
NASA NTRS1991

Active vibration damping of the Space Shuttle remote manipulator system

The feasibility of providing active damping augmentation of the Space Shuttle Remote Manipulator System (RMS) following normal payload handling operations is investigated. The approach used in the analysis is described, and the results for both linear and nonlinear performance analysis of candidate laws are presented, demonstrating that significant improvement in the RMS dynamic response can be achieved through active control using measured RMS tip acceleration data for feedback.

Scott, Michael A.↗
NASA NTRS1994

International Space Station alpha remote manipulator system workstation controls test report

Previous development testing for the space station remote manipulator system workstation controls determined the need for hardware controls for the emergency stop, brakes on/off, and some camera functions. This report documents the results of an evaluation to further determine control implementation requirements, requested by the Canadian Space Agency (CSA), to close outstanding review item discrepancies. This test was conducted at the Johnson Space Center's Space Station Mockup and Trainer Facility in Houston, Texas, with nine NASA astronauts and one CSA astronaut as operators. This test evaluated camera iris and focus, back-up drive, latching end effector release, and autosequence controls using several types of hardware and software implementations. Recommendations resulting from the testing included providing guarded hardware buttons to prevent accidental actuation, providing autosequence controls and back-up drive controls on a dedicated hardware control panel, and that 'latch on/latch off', or on-screen software, controls not be considered. Generally, the operators preferred hardware controls although other control implementations were acceptable. The results of this evaluation will be used along with further testing to define specific requirements for the workstation design.

Ehrenstrom, William A.↗
NASA NTRS1987

Mobile remote manipulator vehicle system

A mobile remote manipulator system is disclosed for assembly, repair and logistics transport on, around and about a space station square bay truss structure. The vehicle is supported by a square track arrangement supported by guide pins integral with the space station truss structure and located at each truss node. Propulsion is provided by a central push-pull drive mechanism that extends out from the vehicle one full structural bay over the truss and locks drive rods into the guide pins. The draw bar is now retracted and the mobile remote manipulator system is pulled onto the next adjacent structural bay. Thus, translation of the vehicle is inchworm style. The drive bar can be locked onto two guide pins while the extendable draw bar is within the vehicle and then push the vehicle away one bay providing bidirectional push-pull drive. The track switches allow the vehicle to travel in two orthogonal directions over the truss structure which coupled with the bidirectional drive, allow movement in four directions on one plane. The top layer of this trilayered vehicle is a logistics platform. This platform is capable of 369 degees of rotation and will have two astronaut foot restraint platforms and a space crane integral.

Bush, Harold G.↗
NASA NTRS2001

Ground-Based Icing Condition Remote Sensing System Definition

This report documents the NASA Glenn Research Center activities to assess and down select remote sensing technologies for the purpose of developing a system capable of measuring icing condition hazards aloft. The information generated by such a remote sensing system is intended for use by the entire aviation community, including flight crews. air traffic controllers. airline dispatchers, and aviation weather forecasters. The remote sensing system must be capable of remotely measuring temperature and liquid water content (LWC), and indicating the presence of super-cooled large droplets (SLD). Technologies examined include Profiling Microwave Radiometer, Dual-Band Radar, Multi-Band Radar, Ka-Band Radar. Polarized Ka-Band Radar, and Multiple Field of View (MFOV) Lidar. The assessment of these systems took place primarily during the Mt. Washington Icing Sensors Project (MWISP) in April 1999 and the Alliance Icing Research Study (AIRS) from November 1999 to February 2000. A discussion of the various sensing technologies is included. The result of the assessment is that no one sensing technology can satisfy all of the stated project goals. Therefore a proposed system includes radiometry and Ka-band radar. A multilevel approach is proposed to allow the future selection of the fielded system based upon required capability and available funding. The most basic level system would be the least capable and least expensive. The next level would increase capability and cost, and the highest level would be the most capable and most expensive to field. The Level 1 system would consist of a Profiling Microwave Radiometer. The Level 2 system would add a Ka-Band Radar. The Level 3 system would add polarization to the Ka-Band Radar. All levels of the system would utilize hardware that is already under development by the U.S. Government. However, to meet the needs of the aviation community, all levels of the system will require further development. In addition to the proposed system, it is also recommended that NASA continue to foster the development of Multi-Band Radar and airborne microwave radiometer technologies.

Reehorst, Andrew L.↗
NASA NTRS1975

Television systems for remote manipulation

An analytical and experimental study was conducted to specify a video system for remote manipulation in space. An operator function analysis identified two basic characteristics, work volume and element relationship, which define four manipulation tasks chosen for examination. A visual function analysis developed a set of elemental scene parameters which grouped the visual dimensions into major areas of influence. Simulation testing was conducted with a four degree-of-freedom motion frame which allowed an operator to perform the manipulation tasks. Four video systems were included in the simulation testing: a black and white and a color monoscopic system, a stereoscopic system, and a black and white two-view system. A sequential experimental plan first provided an overall analysis of the effects of tasks, scene parameters, and video systems. This was followed by a detailed experimental examination of the critical dimensions identified in the first experiment. Results are discussed in terms of a recommended TV system.

Crooks, W. H.↗
NASA NTRS1973

Study to design and develop remote manipulator system

Human performance measurement techniques for remote manipulation tasks and remote sensing techniques for manipulators are described for common manipulation tasks, performance is monitored by means of an on-line computer capable of measuring the joint angles of both master and slave arms as a function of time. The computer programs allow measurements of the operator's strategy and physical quantities such as task time and power consumed. The results are printed out after a test run to compare different experimental conditions. For tracking tasks, we describe a method of displaying errors in three dimensions and measuring the end-effector position in three dimensions.

Hill, J. W.↗
NASA NTRS1974

Study to design and develop remote manipulator system

Modeling of human performance in remote manipulation tasks is reported by automated procedures using computers to analyze and count motions during a manipulation task. Performance is monitored by an on-line computer capable of measuring the joint angles of both master and slave and in some cases the trajectory and velocity of the hand itself. In this way the operator's strategies with different transmission delays, displays, tasks, and manipulators can be analyzed in detail for comparison. Some progress is described in obtaining a set of standard tasks and difficulty measures for evaluating manipulator performance.

Hill, J. W.↗
NASA NTRS1989

Shuttle remote manipulator system mission preparation and operations

The preflight planning, analysis, procedures development, and operations support for the Space Transportation System payload deployment and retrieval missions utilizing the Shuttle Remote Manipulator System are summarized. Analysis of the normal operational loads and failure induced loads and motion are factored into all procedures. Both the astronaut flight crews and the Mission Control Center flight control teams receive considerable training for standard and mission specific operations. The real time flight control team activities are described.

Smith, Ernest E., Jr.↗
NASA NTRS1988

Ocean color remote sensing systems - Radiometric requirements

A methodology for specifying the radiometric requirements for ocean color remote sensing systems is described. Consideration is given to the noise equivalent radiance, the saturation radiance, the polarization sensitivity, and the calibration and stability. The degree of polarization across a scan line for the CZCS and MODIS orbits is presented.

Gordon, Howard R.↗
NASA NTRS2005

NASA Icing Remote Sensing System Comparisons From AIRS II

NASA has an on-going activity to develop remote sensing technologies for the detection and measurement of icing conditions aloft. A multiple instrument approach is the current emphasis of this activity. Utilizing radar, radiometry, and lidar, a region of supercooled liquid is identified. If the liquid water content (LWC) is sufficiently high, then the region of supercooled liquid cloud is flagged as being an aviation hazard. The instruments utilized for the current effort are an X-band vertical staring radar, a radiometer that measures twelve frequencies between 22 and 59 GHz, and a lidar ceilometer. The radar data determine cloud boundaries, the radiometer determines the sub-freezing temperature heights and total liquid water content, and the ceilometer refines the lower cloud boundary. Data is post-processed with a LabVIEW program with a resultant supercooled LWC profile and aircraft hazard identification. Individual remotely sensed measurements gathered during the 2003-2004 Alliance Icing Research Study (AIRS II) were compared to aircraft in-situ measurements. Comparisons between the remote sensing system s fused icing product and in-situ measurements from the research aircraft are reviewed here. While there are areas where improvement can be made, the cases examined indicate that the fused sensor remote sensing technique appears to be a valid approach.

Reehorst, Andrew L.↗