Search NASA⌕ Search

SEARCH · Search NASA

Results for “SATELLITE ORIENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Ring retroreflector system consisting of cube-corner reflectors with special coating

The ring retroreflector system (RS) consisting of cubecorner reflectors (CCRs) with a special coating of reflecting surfaces, intended for uniaxially Earth-oriented navigation satellites, is considered. The error of distance measurement caused by both the laser pulse delay in the CCR and its spatial position (CCR configuration) is studied. It is shown that the ring RS, formed by the CCR with a double-spot radiation pattern, allows the distance measurement error to be essentially reduced. (nanogradient dielectric coatings and metamaterials)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE ENGINEERING DESIGN OF THE ORBITING ASTRONOMICAL OBSERVATORY

The Orbiting Astronomical Observatory (OAO) is designed to provide an accurately stabilized, unmanned platform for astronomical observations from well above the earth's atmosphere. Of primary immediate interest is the observation of stellar radiation in the ultraviolet range, which is severely limited even in balloon experiments because of absorption in the ozone layers. The OAO is a 3600-pound spacecraft that will be placed in orbit by an Atlas Agena D. It can handle optical systems up to 48 inches in diameter, 10 feet in length, weighing 1000 pounds. The key design requirements of the spacecraft are discussed. The reasons behind the configuration are then explained, followed by a discussion of the major subsystems showing how they have been designed to meet the exacting requirements astronomical observation.

SATELLITE INSTRUMENTATION↗

A Passive Gravitational Attitude Control System for Satellites

It is shown how the gravity-gradient effect may be utilized to design a long-lived, earth-pointing satellite attitude control system which requires no fuel supplies, attitude sensors or active control equipment. This two-body system is provided with a magnetic hysteresis damper which effectively damps out oscillations (librations) about the local vertical. The long rods, which must be extended in space from coiled up metal tapes, provide the required large moments of inertia and possess adequate rigidity and sufficient strength to endure the rigors of the extension process. The system is compatible with the requirements of multiple satellite launchings from a single last-stage vehicle. Analysis indicates that the gravitational torques are sufficient to keep the disturbing effects of solar radiation pressure, residual magnetic dipole moments, orbit eccentricity, rod curvature, eddy currents, and meteorite impacts within tolerable limits. It is believed that the high-performance, earth-pointing system described and analyzed in this paper represents an essential step in the development of high-capacity communications satellites requiring long life.

GRAVITY↗

NIMBUS-7 ERB MATGEN Science Document

The ERB algorithms and computer software data flow used to convert sensor data into equivalent radiometric data are described in detail. The NIMBUS satellite location, orientation and sensor orientation algorithms are given. The computer housekeeping and data flow and sensor/data status algorithms are also given.

Soule, H. V.↗

Data management for JGOFS: Theory and design

The Joint Global Ocean Flux Study (JGOFS), currently being organized under the auspices of the Scientific Committee for Ocean Research (SCOR), is intended to be a decade long internationally coordinated program. The main goal of JGOFS is to determine and understand on a global scale the processes controlling the time-varying fluxes of carbon and associated biogenic elements in the ocean and to evaluate the related exchanges with the atmosphere, sea floor and continental boundaries. 'A long-term goal of JGOFS will be to establish strategies for observing, on long time scales, changes in ocean biogeochemical cycles in relation to climate change'. Participation from a large number of U.S. and foreign institutions is expected. JGOFS investigators have begun a set of time-series measurements and global surveys of a wide variety of biological, chemical and physical quantities, detailed process-oriented studies, satellite observations of ocean color and wind stress and modeling of the bio-geochemical processes. These experiments will generate data in amounts unprecedented in the biological and chemical communities; rapid and effortless exchange of these data will be important to the success of JGOFS.

Flierl, Glenn R.↗

Other Planetary Systems: The View From Our Neighborhood

The structure and contents of the Solar System offer an initial model for other planetary systems in this and other galaxies. Our knowledge of the bodies in the Solar System and their physical conditions has grown enormously in the three decades of planetary exploration. Parallel to the uncovering of new facts has been a great expansion of our understanding of just how these conditions came to be. Telescopic studies and missions to all the planets (except Pluto) have shown spectacular and unexpected diversity among those planets, their satellites, the asteroids, and the comets. Highlights include the organic-rich crust of comets, volcanic activity on planetary satellites, randomly oriented magnetic fields of the major planets, the existence of a huge population of planetesimals just beyond Neptune, dramatic combinations of exogenic and endogenic forces shaping the solid bodies throughout the Solar System, and much more. Simultaneously, computational, laboratory, and conceptual advances have shown that the Solar System is not fully evolved either dynamically or chemically. The discovery of clearly identified interstellar (presolar) material in the meteorites and comets connects us directly with the matter in the molecular cloud from which the Solar System originated. At the same time, an increased understanding of the chemistry of comets and the impact history of the planets has demonstrated the dependence of the origin and evolution of life on Earth on powerful exogenic factors. This presentation summarizes some of the new knowledge of the Solar System and proposes specific character ist ics that may be observed in (or used as criteria for identification of) extrasolar planetary systems.

Cruikshank, Dale P.↗

The mass and density of the dwarf planet (225088) 2007 OR10

The satellite of (225088) 2007 OR10 was discovered on archival Hubble Space Telescope images and along with new observations with the WFC3 camera in late 2017 we have been able to determine the orbit. The orbit's notable eccentricity, e ≈ 0.3, may be a consequence of an intrinsically eccentric orbit and slow tidal evolution, but may also be caused by the Kozai mechanism. Dynamical considerations also suggest that the moon is small, D(eff) < 100 km. Based on the newly determined system mass of 1.75 ·10^21 kg, 2007 OR10 is the fifth most massive dwarf planet after Eris, Pluto, Haumea and Makemake. The newly determined orbit has also been considered as an additional option in our radiometric analysis, provided that the moon orbits in the equatorial plane of the primary. Assuming a spherical shape for the primary this approach provides a size of 1230 ± 50 km, with a slight dependence on the satellite orbit orientation and primary rotation rate chosen, and a bulk density of 1.75 ± 0.07 g/cu.cm for the primary. A previous size estimate that assumed an equator-on configuration (1535(−225,+75) km) would provide a density of 0.92(−0.14,+0.46) g/cu.cm, unexpectedly low for a 1000 km-sized dwarf planet.

Csaba Kiss↗

The Implementation of Satellite Control System Software Using Object Oriented Design

NASA established the Small Explorer (SMEX) program in 1988 to provide frequent opportunities for highly focused and relatively inexpensive space science missions that can be launched into low earth orbit by small expendable vehicles. The development schedule for each SMEX spacecraft was three years from start to launch. The SMEX program has produced five satellites; Solar Anomalous and Magnetospheric Particle Explorer (SAMPEX), Fast Auroral Snapshot Explorer (FAST), Submillimeter Wave Astronomy Satellite (SWAS), Transition Region and Coronal Explorer (TRACE) and Wide-Field Infrared Explorer (WIRE). SAMPEX and FAST are on-orbit, TRACE is scheduled to be launched in April of 1998, WIRE is scheduled to be launched in September of 1998, and SWAS is scheduled to be launched in January of 1999. In each of these missions, the Attitude Control System (ACS) software was written using a modular procedural design. Current program goals require complete spacecraft development within 18 months. This requirement has increased pressure to write reusable flight software. Object-Oriented Design (OOD) offers the constructs for developing an application that only needs modification for mission unique requirements. This paper describes the OOD that was used to develop the SMEX-Lite ACS software. The SMEX-Lite ACS is three-axis controlled, momentum stabilized, and is capable of performing sub-arc-minute pointing. The paper first describes the high level requirements which governed the architecture of the SMEX-Lite ACS software. Next, the context in which the software resides is explained. The paper describes the benefits of encapsulation, inheritance and polymorphism with respect to the implementation of an ACS software system. This paper will discuss the design of several software components that comprise the ACS software. Specifically, Object-Oriented designs are presented for sensor data processing, attitude control, attitude determination and failure detection. The paper addresses the benefits of the OOD versus a conventional procedural design. The final discussion in this paper will address the establishment of the ACS Foundation Class (AFC) Library. The AFC is a large software repository, requiring a minimal amount of code modifications to produce ACS software for future projects, saving production time and costs.

Anderson, Mark O.↗

Model-based satellite acquisition and tracking

A model-based optical processor is introduced for the acquisition and tracking of a satellite in close proximity to an imaging sensor of a space robot. The type of satellite is known in advance, and a model of the satellite (which exists from its design) is used in this task. The model base is used to generate multiple smart filters of the various parts of the satellite, which are used in a symbolic multi-filter optical correlator. The output from the correlator is then treated as a symbolic description of the object, which is operated upon by an optical inference processor to determine the position and orientation of the satellite and to track it as a function of time. The knowledge and model base also serves to generate the rules used by the inference machine. The inference machine allows for feedback to optical correlators or feature extractors to locate the individual parts of the satellite and their orientations.

Casasent, David↗

Satellite dual antenna pointing system

A satellite antenna pointing system for separately pointing separated transmit and receive high gain antenna systems includes means for separately and sequentially applying a beacon signal to the transmit and receive antenna systems and a broad beam width antenna which has a coverage area greater than the overall coverage region of the spot beam antenna systems. The system includes ground stations located at or near the periphery of the overall coverage region adapted to receive these beacon signals. At a central control station these beacon signals are compared to provide first signals proportional to the ratio of said beacon signals received from said transmit antenna system and said broad beam width antenna and second signals proportional to the ratio of said beacon signals received from said satellite receive antenna system and said broad beam width antenna. The central station generates from said first signals transmit antenna control signals which are sent to the satellite to control the orientation of said transmit antenna system. Likewise, the central control station generates from the second signals receiver antenna control signals which are applied to the satellite to control the orientation of the satellite receive antenna system.

Keigler, John E.↗

The application of image processing to satellite navigation

Given the locations of several landmarks on a satellite acquired image and their true geographic coordinates, the position and orientation of the satellite can be determined. Two methods for automatically locating the image coordinates of specified landmarks are described. The first, a particularly fast sequential similarity detection algorithm for template matching was originally described by Nagel and Rosenfeld. The second method involves iteratively resampling the picture function in the vicinity of the anticipated landmark. A variety of other speedup methods is also described. An application to SMS imagery is envisioned.

Hord, R. M.↗

Satellite Motion Effects on Current Collection in Low Earth Orbit

Results from the Tethered Satellite System (TSS) missions unambiguously show that the electrodynamic tether system produced 2 to 3 times the predicted current levels in the tether. The pre-mission predictions were based on the well-known Parker-Murphy (PM) model, which describes the collection of current by an electrically biased satellite in the ionospheric plasma. How the TSS satellite was able to collect 2-3 times the PM current has remained an open question. In the present study, self-consistent potential and motional effects are introduced into the Thompson and Dobrowolny sheath models. As a result, the magnetic field aligned sheath-an essential variable in determining current collection by a satellite-is derived and is shown to be explicitly velocity dependent. The orientation of the satellite's orbital motion relative to the geomagnetic field is also considered in the derivation and a velocity dependent expression for the collected current is obtained. The resulting model provides a realistic treatment of current collection by a satellite in low earth orbit. Moreover, the predictions, using the appropriate parameters for TSS, are in good agreement with the tether currents measured during the TSS-1R mission.

Zhang, T. X.↗