Delta-T curves for measuring magnetic tape link jitter.
Root mean square time delay error with respect to playback time and autocorrelation function of tape recorded sine wave for studying jitter spectra
Cole, J. M.↗
SEARCH · Search NASA
Results for “SINE WAVE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Acquisition time in a first order phase lock loop
Aquisition time parameter for first order phase lock loop with sine wave input in additive Gaussian noise
Schuchman, L.↗
A 20 kHz power oscillator
Circuit providing stable sine wave power up to 10 W supplies small amounts of power at frequency other than 60 Hz. Circuit has Wien bridge oscillator which uses operational amplifier to feed power amplifier stage. Power amplifier stage uses booster amplifier and two discrete transistors for power output.
Sturman, J. C.↗
Tracking analysis of a first order phase- locked loop with two sinewaves modulation
Phase locked-loop tracking with sine wave modulation in Apollo communication systems
Lee, S. Y.↗
Development and performance of pulse-width-modulated static inverter and converter modules
Pulse-width-modulated inverter and converter modules are being developed for modular aerospace electrical power systems. The modules, rate 2.5 kilowatts per module and 10-minute - 150-percent overload, operate from 56 volts dc. The converter module provides two output voltages: a nominal link voltage of 200 volts dc when used with the inverter, and 150 volts dc to a load bus when used separately. The inverter module output is 400-hertz, sinusoidal, three-phase, 120/208 volts. Tests of breadboard models with standard parts and integrated circuits show rated power efficiencies of 71.4 and 85.1 percent and voltage regulation of 5 and 3.1 percent for inverter and converter modules, respectively. Sine-wave output distortion is 0.74 percent.
Pittman, P. F.↗
Response of electroexplosive devices to impulsive waveforms.
The firing characteristics of insensitive electroexplosive devices to certain impulsive waveforms have been investigated. For these waveforms, energy is delivered in a time short compared to the thermal time constant and therefore cooling plays a negligible role. One waveform is a terminated capacitor discharge wherein the regular discharge of a capacitor is terminated at a preset point. Another is a half-sine wave pulse. The theory, design, and application of both impulsive waveform generators are presented together with certain limited experimental observations.
Rosenthal, L. A.↗
Sensor noise in low-level flux-gate magnetometers.
The noise mechanism in a well-designed magnetometer is shown to be due to small-scale magnetic moments which are probably small volumes of the core material that are not oriented by the drive field. Design developments include the sense coil radius and the development of a drive waveform which yields considerably improved performance over the commonly used sine wave drive.
Scouten, D. C.↗
An input adaptive, pursuit tracking model of the human opertor
Developed and evaluated is a simple model of the input adaptive behavior of the human operator (HO) in a pursuit tracking task in which the plant controlled consists of a pure gain. If it is assumed that the HO is approximately an optimal predictor using only position and velocity information, then there is a simple method of computing the values of the model parameters in terms of the autocorrelation function of the input signal. Experimental evidence indicates that the ability of the HO to use velocity information decreases with increasing signal velocity indicating that a biased estimator of the velocity weighting should be used. A suitable approximation is derived which has rapid convergence and low variance. The model thus derived is compared to actual subject transfer functions and is found to be in close agreement. In addition to tracking random processes the model can adapt to and track deterministic signals, such as sine waves, up to approximately the frequency at which human operators begin to track precognitively.
Ware, J. R.↗
Molecular solid-state inverter-converter system
A modular approach for aerospace electrical systems has been developed, using lightweight high efficiency pulse width modulation techniques. With the modular approach, a required system is obtained by paralleling modules. The modular system includes the inverters and converters, a paralleling system, and an automatic control and fault-sensing protection system with a visual annunciator. The output is 150 V dc, or a low distortion three phase sine wave at 120 V, 400 Hz. Input power is unregulated 56 V dc. Each module is rated 2.5 kW or 3.6 kVA at 0.7 power factor.
Birchenough, A. G.↗
A novel laser ranging system for measurement of ground-to-satellite distances
A technique was developed for improving the precision of laser ranging measurements of ground-to-satellite distances. The method employs a mode-locked laser transmitter and utilizes an image converter tube equipped with deflection plates in measuring the time of flight of the laser pulse to a distant retroreflector and back. Samples of the outgoing and returning light pulses are focussed on the photocathode of the image converter tube, whose deflection plates are driven by a high-voltage 120 MHz sine wave derived from a very stable oscillator. From the relative positions of the images produced at the output phosphor by the two light pulses, it is possible to make a precise determination of the fractional amount by which the time of flight exceeds some large integral multiple of the period of the deflection sinusoid.
Golden, K. E.↗
Noncoherent detection of periodic signals
The optimal Bayes detector for a general periodic waveform having uniform delay and additive white Gaussian noise is examined. It is shown that the detector is much more complex than that for the well known cases of pure sine waves (i.e. classical noncoherent detection) and narrowband signals. An interpretation of the optimal processing is presented, and several implementations are discussed. The results have application to the noncoherent detection of optical square waves.
Gagliardi, R. M.↗
An implicit sampling theorem for bounded bandlimited functions
A rigorous proof of the 'strong bias tone' scheme is embodied in the implicit sampling theorem. The representation of signals that are sample functions of possible nonstationary random processes being of principal interest, the proof could not directly invoke results from classical analysis, which depend on the existence of the Fourier transform of the function under consideration; rather, it is based on Zakai's (1965) theorem on the series expansion of functions, band-limited under a suitably extended definition. A practical circuit that restores an approximate version of the signal from its sine-wave-crossings is presented and possible improvements to it are discussed.
Bar-David, I.↗
Development of a 1000V, 200A, low-loss, fast-switching, gate-assisted turn-off thyristor
Feasibility was demonstrated for a thyristor that blocks 1000V forward and reverse, conducts 200A, and turns on in little more than 2 microsec with only 2A of gate drive. Its features include a turn-off time of 3 microsec achieved with 2A of gate assist current of a few microseconds duration and an energy dissipation of only 12 mJ per pulse for a 20 microsec half sine wave, 200A pulse. Extensive theoretical and experimental study of the electrical behavior of thyristors having a fast turn-off time have significantly improved the understanding of the physics of turning thyristor off. Thyristors of two new designs were fabricated and evaluated. The high speed and low power were achieved by a combination of gate amplification, cathode shunting, and gate-assisted turn-off. Two techniques for making this combination practical are described.
Schlegel, E. S.↗
Research study of Beta Cephei variable stars using data from OAO-2
Photometric data from the Wisconsin Experiment package on OAO-2 were obtained for six Beta Cephei variable stars. The data were reduced in accordance with the OAO 2/Wisconsin Experiment Package Photometer Users Guide. For delta Cet and gamma Peg, there were enough data points to form reliable composite light curves at seven or eight ultraviolet wavelengths. The light curves are well represented by sine waves in phase with the blue light curve for each star. The amplitude of the light variation increases with shorter wavelengths. For theta Oph, epsilon Cen, eta Sco, and Lambda Sco, mean magnitudes and light ranges were obtained at several ultraviolet wavelengths. No significant differences were found between the mean, de-reddened ultraviolet colors of the observed stars, and the mean values for standard stars computed by Bottemiller. An attempt to derive a temperature scale from a comparison of the observed ultraviolet colors with Kurucz models was unsuccessful.
Lesh, J. R.↗
Viking 1975 Orbiter Development Test Model/Lander Dynamic Test Model dynamic environmental testing - An overview
The current work presents an overview of the Viking 1975 environmental testing from an engineering standpoint. An extremely large vibration test fixture had to be designed, analyzed, and integrated into a test setup that employed hydrostatic bearings in a new fashion. A vibration control system was also required that would allow for thirty-six channels of sine-wave peak select control from acceleration, force-of-strain transducers. In addition, some 68 channels of peak limiting shutdown capability were needed for backup and monitoring of other data during the forced vibration test. Pretesting included analyses of the fixture design, overturning moment, control system capabilities, and response of the entire spacecraft/fixture/exciter system to the test environment. Closed-loop control for acoustic testing was a necessity due to the fact that the Viking spacecraft took up a major portion of the volume of the 10,000 cu ft chamber. The spacecraft emerged from testing undamaged.
Milder, G.↗
Signal level detector
Frequency-independent circuits measure amplitude of sine waves via Schmitt-trigger circuits, pair of inverters, and two flip-flop stages. Accuracy of unit is limited by Schmitt trigger threshold levels, which depend on temperature and on component variations from unit to unit.
Anderson, T. O.↗
An active thermal compensator for closed-cycle helium refrigerators
A technique was developed for reducing the amplitude of the temperature oscillation in He closed-cyle refrigerators. The device uses a semiconductor diode as a heating element to actively supply a small oscillating input of heat at a point between the laser and the cold-tip to cancel the heat oscillations due to the refrigerator. It was found that the heater diode could drive the temperature of the heat sink more effectively, i.e., with lower current and therefore less heat, if the heat sink was insulated slightly from the rest of the mount. A sine-wave generator was used to drive the programmable supply which provided the offset current to the heater diode. By matching the frequency and phase of the oscillator to that of the refrigerator cycle, and by adjusting the amplitude of the oscillator signal, the temperature fluctuations at the laser could be minimized. Residual fluctuations were about 0.003K peak-to-peak, at an operating temperature of 9.5K.
Jennings, D. E.↗
Development of a 1000V, 200A, low-loss, fast-switching, gate-assisted turn-off thyristor
The results of a program to develop a fast high power thyristor that can operate in switching circuits at frequencies of 10 to 20 kHz with very low power loss are given. Feasibility was demonstrated for a thyristor that blocks 1000V forward and reverse, conducts 200A, turns on in little more than 2 more microseconds with only 2A of gate drive, turns off in 3 microseconds with 2A of gate assist current and has an energy dissipation of only 12 mJ per pulse for a 20 microsecond half sine wave 200A pulse. Data were generated that clearly showed the tradeoffs that can be made between the turn off time and forward drop. The understanding of this relationship is necessary in the selection of deliverable thyristors with turn off times up to 7 microseconds to give improved efficiency in a series resonant dc to dc inverter application.
Schlegel, E. S.↗