Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPACE BUS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

SS focused technology: Gateways and NOS's

The extensions and enhancements of the fiber optic data bus technology supported by the Space Station Focused Technology Program are discussed. This includes the operating software for the network called the Network Operating System (NOS); gateways and bridges for multiple network topologies; and very large scale topology implimentations to shrink the size and power of the Bus Interface Unit (BIU) down to more manageable dimensions. CMOS is being investigated for the lower speed (parallel) logic. Gallium arsendide is being studied for the high speed (serial) logic.

Hartenstein, R.↗
NASA NTRS1990

A model-based approach to the symbolic control of space subsystems

A multilayered approach to the symbolic control of complex electromechanical assemblies, such as spaceborne thermal, power, and life subsystems, is discussed. An example of this approach is given in some recent tests of the Thermal Expert System (TEXSYS) in control of the Boeing Aerospace Thermal Bus System (BATBS), a prototype two-phase Space Station Freedom thermal bus. The BATBS hardware requires read-update-act cycles of under a minute, and it is subject to dynamic reconfiguration while operating. These performance requirements are addressed by layering model-based expert system software on a conventional numerical data acquisition and control system. TEXSYS test results demonstrate both nominal control and fault recovery actions with the BATBS. Dynamic modification of the symbolic model used in this approach is compared to that of a classical numerical adaptive controller.

Glass, B. J.↗
NASA NTRS1991

Multipurpose satellite bus (MPS)

The Naval Postgraduate School Advanced Design Project sponsored by the Universities Space Research Association Advanced Design Program is a multipurpose satellite bus (MPS). The design was initiated from a Statement of Work (SOW) developed by the Defense Advanced Research Projects Agency (DARPA). The SOW called for a 'proposal to design a small, low-cost, lightweight, general purpose spacecraft bus capable of accommodating any of a variety of mission payloads. Typical payloads envisioned include those associated with meteorological, communication, surveillance and tracking, target location, and navigation mission areas.' The design project investigates two dissimilar missions, a meteorological payload and a communications payload, mated with a single spacecraft bus with minimal modifications. The MPS is designed for launch aboard the Pegasus Air Launched Vehicle (ALV) or the Taurus Standard Small Launch Vehicle (SSLV).

Source record↗
NASA NTRS1991

TEXSYS - A large scale demonstration of model-based real-time control of a Space Station subsystem

A hybrid approach to qualitative and temporal reasoning, using a device-oriented model-based representation in conjunction with both consistency-based and classification diagnosis methods, can be effectively used to monitor and control a complex electromechanical system. An example of this approach is given in some recent tests of the Thermal Expert System (TEXSYS) in control of the Boeing Aerospace Thermal Bus System (BATBS), a prototype two-phase Space Station Freedom thermal bus. The constraints of realtime performance and changing target hardware led to significant changes in the initial approach, including a reduction in the use of deep structural reasoning and the addition of temporal reasoning capabilities. TEXSYS test results show the successful completion of both nominal control and fault recovery actions with the BATBS.

Glass, B. J.↗
NASA NTRSDate not supplied

BioSentinel: Forging the path for Deep Space CubeSat Missions

The BioSentinel mission was launched in 2022 aboard the SLS launch vehicle as part of the Artemis-I campaign and continues mission operations into 2024. The 6U CubeSat has been characterizing deep space radiation at large distances from Earth. This presentation gives a status of the mission performance to date, as well as some of the lessons learned from project. BioSentinel has achieved unprecedented performance as an SLS secondary payload due to preparation, planning, and a robust design. Pre-launch antenna and interface testing with both DSN and ESA confirmed command and data pathways and allowed for operational flexibility in the critical early hours post-deployment. Mission Operations simulations prior to launch identified potential risks and trained operators to respond in flight, preparing the team to react quickly and successfully to detumble the spacecraft and enter a power-positive state. The spacecraft would not have survived without the inclusion of the trailblazing 3D-printed composite cold gas propulsion system. The non-standard tank geometry enabled efficient use of the limited space available in the CubeSat form factor as well as the capability to detumble the spacecraft and manage momentum for extended mission durations, while providing sufficient margin to execute potential delta-V maneuvers. Following the conclusion of the primary science mission, the Linear Energy Transfer (LET) Spectrometer has continued to collect solar and galactic radiation data from its unique location in heliocentric orbit. The free space dataset offered by the BioSentinel LET is a valuable source of data for both model validation and future mission planning. As the spacecraft travels farther from Earth it is poised to provide longitudinally distributed measurements of solar particle events during solar maximum. NASA Ames led development of the BioSentinel spacecraft to operate for long durations in deep space. The novel subsystems and COTS components that comprise the BioSentinel bus can serve as a template for future deep space missions, while the lessons the team has learned from well over a year of continuous operations will enable improved performance in the generation of deep space CubeSat missions.

BioSentinel↗
NASA NTRS1982

"Ruggedized" Microcomputer Bus

"Ruggedized" version of the STD microcomputer bus withstands rigors of space-flight. Could be used as a basis for microcomputers in other hazardous environments, including those at high and low temperatures, those in vacuum, or those subject to extreme shock and vibration.

Budney, T. J.↗
NASA NTRS2009

Alert Notification System Router

The Alert Notification System Router (ANSR) software provides satellite operators with notifications of key events through pagers, cell phones, and e-mail. Written in Java, this application is specifically designed to meet the mission-critical standards for mission operations while operating on a variety of hardware environments. ANSR is a software component that runs inside the Mission Operations Center (MOC). It connects to the mission's message bus using the GMSEC [Goddard Space Flight Center (GSFC) Mission Services Evolution Center (GMSEC)] standard. Other components, such as automation and monitoring components, can use ANSR to send directives to notify users or groups. The ANSR system, in addition to notifying users, can check for message acknowledgements from a user and escalate the notification to another user if there is no acknowledgement. When a firewall prevents ANSR from accessing the Internet directly, proxies can be run on the other side of the wall. These proxies can be configured to access the Internet, notify users, and poll for their responses. Multiple ANSRs can be run in parallel, providing a seamless failover capability in the event that one ANSR system becomes incapacitated.

Gurganus, Joseph↗
NASA NTRS2001

Determination of an Optimal Commercial Data Bus Architecture for a Flight Data System

NASA/Marshall Space Flight Center (MSFC) is continually looking for methods to reduce cost and schedule while keeping the quality of work high. MSFC is NASA's lead center for space transportation and microgravity research. When supporting NASA's programs several decisions concerning the avionics system must be made. Usually many trade studies must be conducted to determine the best ways to meet the customer's requirements. When deciding the flight data system, one of the first trade studies normally conducted is the determination of the data bus architecture. The schedule, cost, reliability, and environments are some of the factors that are reviewed in the determination of the data bus architecture. Based on the studies, the data bus architecture could result in a proprietary data bus or a commercial data bus. The cost factor usually removes the proprietary data bus from consideration. The commercial data bus's range from Versa Module Eurocard (VME) to Compact PCI to STD 32 to PC 104. If cost, schedule and size are prime factors, VME is usually not considered. If the prime factors are cost, schedule, and size then Compact PCI, STD 32 and PC104 are the choices for the data bus architecture. MSFC's center director has funded a study from his discretionary fund to determine an optimal low cost commercial data bus architecture. The goal of the study is to functionally and environmentally test Compact PCI, STD 32 and PC 104 data bus architectures. This paper will summarize the results of the data bus architecture study.

Crawford, Kevin↗
NASA NTRS2005

Measurement of the Shear Lift Force on a Bubble in a Channel Flow

Two-phase flow systems play vital roles in the design of some current and anticipated space applications of two-phase systems which include: thermal management systems, transfer line flow in cryogenic storage, space nuclear power facilities, design and operation of thermal bus, life support systems, propulsion systems, In Situ Resource Utilization (ISRU), and space processes for pharmaceutical applications. The design of two-phase flow systems for space applications requires a clear knowledge of the behaviors of the dispersed phase (bubble), its interaction with the continuous phase (liquid) and its effect on heat and mass transfer processes, The need to understand the bubble generation process arises from the fact that for all space applications, the size and distribution of bubbles are extremely crucial for heat and mass transfer control. One important force in two-phase flow systems is the lift force on a bubble or particle in a liquid shear flow. The shear lift is usually overwhelmed by buoyancy in normal gravity, but it becomes an important force in reduced gravity. Since the liquid flow is usually sheared because of the confining wall, the trajectories of bubbles and particles injected into the liquid flow are affected by the shear lift in reduced gravity. A series of experiments are performed to investigate the lift force on a bubble in a liquid shear flow and its effect on the detachment of a bubble from a wall under low gravity conditions. Experiments are executed in a Poiseuille flow in a channel. An air-water system is used in these experiments that are performed in the 2.2 second drop tower. A bubble is injected into the shear flow from a small injector and the shear lift is measured while the bubble is held stationary relative to the fluid. The trajectory of the bubble prior, during and after its detachment from the injector is investigated. The measured shear lift force is calculated from the trajectory of the bubble at the detachment point. These values for the shear lift are then compared with the theoretical predictions from various published works on shear lift in the open literature, which include asymptotic solutions at low bubble Reynolds number, potential flow predictions and numerical studies that deal with intermediate bubble Reynolds numbers.

Nahra, Henry K.↗
NASA NTRS2018

Large Satellite Bus Reliability

NASA is proposing to build a small space station in Cis-lunar orbit called Deep Space Gateway (DSG). At the heart of the DSG is the Power and Propulsion Element (PPE) which is conceptually similar to previously designed and operated satellite buses. A satellite bus is composed of the satellite spacecraft infrastructure minus the payload, and generally includes power, propulsion, avionics, and guidance, navigation and control. In November of 2017, five companies were awarded contracts by NASA to research PPE designs. In order to better understand the reliability of large satellite buses which may be the starting point of the PPE, NASA used Weibull analysis to evaluate spacecraft with similar masses and design life to the PPE. In addition, a subset of the large satellites which had satellite buses manufactured by any one of the five companies was also evaluated. This paper provides the results of the reliability analysis and compares the reliability of the general population of large satellites to the reliability associated with large satellite buses manufactured by the five companies currently studying PPE options.

Bus↗
NASA NTRS2014

BioSentinel: Enabling CubeSat-Scale Biogical Research Beyond Low Earth Orbit

The introduction of the Space Launch System will provide NASA with a new means of access to space beyond low Earth orbit (LEO), creating opportunities for scientific research in a range of spacecraft sizes. This presentation describes the preliminary design of the BioSentinel spacecraft, a CubeSat measuring 10cm x 20cm x 30cm, which has been manifested for launch on the maiden voyage of the Space Launch System in 2017. BioSentinel will provide the first direct experimental data from a biological study conducted beyond LEO in over forty years, which in turn will help to pave the way for future human exploration missions. The combination of an advanced biology payload with standard spacecraft bus components required for operation in deep space within a CubeSat form factor poses a unique challenge, and this paper will describe the early design trades under consideration. The baseline spacecraft design calls for the biology payload to occupy four cube-units of volume (denoted 4U), with all spacecraft bus components occupying the remaining 2U.

Space Biology↗
NASA NTRS1975

Modular bus and payload designs for the Shuttle era

The Space Shuttle, in combination with the Interim Upper Stage, will provide an economical means of placing payloads in geostationary orbit in the 1980s. This paper summarizes a recent study of multidiscipline applications payloads for Shuttle-IUS launch. Various concepts for modular 'bus' spacecraft structures and payload groupings based on equipment commonality are considered. Several bus and payload configurations, ranging from 160 to 1600 kg, are developed. A typical payload is described in some detail. The payload consists of equipment at 400 MHz for search and rescue and data collection, at 1.5 and 15 GHz for aeronautical, maritime, and land mobile communications, at 40 and 90 GHz for millimeter wave communications, and at other bands for meteorological radiometry, electromagnetic environment measurements, and interferometry.

Durrani, S. H.↗
NASA NTRS2015

Townes Group Activities from 1983-2000: Personal Recollections of William Danchi

I arrived in Berkeley in October 1983 as a post-doc, and my appointment was at the Space Sciences Laboratory (SSL). During that time the group was very large, with multiple activities led by Charlie himself and also by Senior Fellows such as John Lacy, Dan Jaffe, and Al Betz at the top of the hill at Space Sciences. Another significant contingent of the Townes group was housed in Birge Hall on campus, led by Reinhard Genzel when he was an Assistant Professor in the Physics Department. Although the group encompassed two separate locations, it functioned as one large group. Either we rode with Charlie up and down the hill, or (if we were concerned about our safety!) we took the bus.

Space Sciences Laboratory (SSL)↗
NASA NTRS1990

Space Station thermal control system evolution

The thermal control system (TCS) for the space station assembly complete configuration includes a two-phase central thermal bus with a supplemental body mounted radiator system. Evolution of the space station from a heat rejection capacity of 75 kW to 300 kW will require scars to expand the thermal fluid distribution network, equipment replacement to enable greater thermal transport capacity, and enlargement of the heat rejection subsystem for increased heat rejection. The TCS requirements for assembly completion and growth are presented along with a review of the basic structure of the active and passive thermal control systems which include provisions for growth.

Bullock, Richard L.↗
NASA NTRS2015

BioSentinel: Mission Development of a Radiation Biosensor to Gauge DNA Damage and Repair Beyond Low Earth Orbit on a 6U Nanosatellite.

We are designing and developing a "6U" (10 x 22 x 34 cm; 14 kg) nanosatellite as a secondary payload to fly aboard NASA's Space Launch System (SLS) Exploration Mission (EM) 1, scheduled for launch in late 2017. For the first time in over forty years, direct experimental data from biological studies beyond low Earth orbit (LEO) will be obtained during BioSentinel's 12- to 18- month mission. BioSentinel will measure the damage and repair of DNA in a biological organism and allow us to compare that to information from onboard physical radiation sensors. In order to understand the relative contributions of the space environment's two dominant biological perturbations, reduced gravity and ionizing radiation, results from deep space will be directly compared to data obtained in LEO (on ISS) and on Earth. These data points will be available for validation of existing biological radiation damage and repair models, and for extrapolation to humans, to assist in mitigating risks during future long-term exploration missions beyond LEO. The BioSentinel Payload occupies 4U of the spacecraft and will utilize the monocellular eukaryotic organism Saccharomyces cerevisiae (yeast) to report DNA double-strand-break (DSB) events that result from ambient space radiation. DSB repair exhibits striking conservation of repair proteins from yeast to humans. Yeast was selected because of 1) its similarity to cells in higher organisms, 2) the well-established history of strains engineered to measure DSB repair, 3) its spaceflight heritage, and 4) the wealth of available ground and flight reference data. The S. cerevisiae flight strain will include engineered genetic defects to prevent growth and division until a radiation-induced DSB activates the yeast's DNA repair mechanisms. The triggered culture growth and metabolic activity directly indicate a DSB and its successful repair. The yeast will be carried in the dry state within the 1-atm P/L container in 18 separate fluidics cards with each card having 16 independent culture microwells, with integral microchannels and filters to supply nutrients and reagents, confine the yeast to the wells, and enable optical measurement. The measurement subsystem will monitor each subgroup of culture wells continuously for several weeks, optically tracking DSBtriggered cell growth and metabolism. BioSentinel will also include physical radiation sensors based on the TimePix sensor, as implemented by JSC's RadWorks group, which record individual radiation events including estimates of their linear-energytransfer (LET) values. Radiation-dose and LET data will be compared directly to the rate of DSB-and-repair events measured by the S. cerevisiae biosentinels. The spacecraft bus will operate in a deep space environment with functions that include command and data handling, communications, power generation (via deployable solar panels) and storage, and attitude determination-and-control system with micropropulsion. Development of the BioSentinel spacecraft will mature and prove multiple nanosatellite advances in order to function well beyond LEO: Communications from distances of ≥ 500,000 km; Autonomous attitude control, momentum management, and safe mode of nanosatellites in deep space; Shielding-, hardening-, design-, and software-derived radiation tolerance for electronics; Reliable functionality for 12 - 18 months of key subsystems for biofluidics, memory, communications, power, etc.; Close integration of living biological radiation event monitors with miniature physical radiation spectrometers; Biological measurement of solar particle events beyond Earth orbit In addition to providing the first biological results from beyond LEO in over 4 decades, BioSentinel will provide an adaptable small-satellite instrument platform to perform a range of human-exploration-relevant measurements that characterize the biological consequences of multiple outer space environments. BioSentinel is being developed under NASA's Advanced Exploration Systems program.

DNA damage↗
NASA NTRSDate not supplied

Implementation of a Hybrid Edge Node-Centroid Node Approach for the Generation of Reduced Thermal Models

Reduced thermal models are often required for delivery to organizations that manage observatory or launch models at the highest levels of assembly. However, the effort to generate reduced models, and verify against their detailed counterparts, is a challenge that has not yet been conclusively solved. Higher level organizations often place a limit on the number of nodes for delivered models with the assumption that smaller models generally result in less computation time. However, the burden of producing and verifying the accuracy of the reduced models is placed primarily on the lower-level organizations, which in turn consumes resources needed to produce these models. Limiting the total number of allowable nodes may also prevent users from taking full advantage of software capabilities that allow for faster generation of models, such as finite elements, which generally require more nodes than older centroid based models. A methodology using Thermal Desktop was described in 2010 which used: (1) finite elements and edge nodes for a conduction matrix, (2) centroid nodes for capacitance and radiative computations, and (3) the super network feature to produce a conduction matrix based only on the centroid nodes. At that time, the methodology was clear, but the implementation would have had to be done manually; however, with the inclusion of the OpenTD Application Programming Interface, this methodology can now be implemented programmatically and for the first time, be a viable approach for the generation of reduced models. The approach was implemented and developed at the NASA Goddard Space Flight Center (GSFC) for the Capture, Containment, and Return System (CCRS) payload on the Earth Return Orbiter (ERO) as part of the Mars Sample Return mission, resulting in the TCYEE tool. ERO features a spacecraft bus provided by Airbus through the European Space Agency with node limitations on the delivered CCRS model provided by GSFC. TCYEE was used to generate the reduced model for this delivery and the predictions compared favorably to the detailed model currently in use for the thermal performance evaluation. Furthermore, TCYEE is being explored for potential use on the Roman Space Telescope (RST) for the generation of reduced models for delivery to the launch provider, which also has node limit requirements on the RST observatory model for use in launch simulation analyses. This paper describes the methodology, its implementation, and compares the performance of reduced models generated by TCYEE to their detailed counterparts.

Thermal Desktop↗
NASA NTRS2008

Replication of Space-Shuttle Computers in FPGAs and ASICs

A document discusses the replication of the functionality of the onboard space-shuttle general-purpose computers (GPCs) in field-programmable gate arrays (FPGAs) and application-specific integrated circuits (ASICs). The purpose of the replication effort is to enable utilization of proven space-shuttle flight software and software-development facilities to the extent possible during development of software for flight computers for a new generation of launch vehicles derived from the space shuttles. The replication involves specifying the instruction set of the central processing unit and the input/output processor (IOP) of the space-shuttle GPC in a hardware description language (HDL). The HDL is synthesized to form a "core" processor in an FPGA or, less preferably, in an ASIC. The core processor can be used to create a flight-control card to be inserted into a new avionics computer. The IOP of the GPC as implemented in the core processor could be designed to support data-bus protocols other than that of a multiplexer interface adapter (MIA) used in the space shuttle. Hence, a computer containing the core processor could be tailored to communicate via the space-shuttle GPC bus and/or one or more other buses.

Ferguson, Roscoe C.↗