Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scramjet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Initial wind tunnel tests at Mach 4 and 7 of a hydrogen-burning, airframe-integrated scramjet

A research investigation of a new, fixed-geometry, hydrogen-burning scramjet engine concept, designed for total airframe integration, is currently in progress. Two heavily instrumented engine models incorporate inlet and combustor designs developed previously in component tests. Initial tests of these subscale engine models are being conducted in ground facilities at conditions simulating flight at Mach numbers 4 and 7. The scramjet test results which are presented include inlet performance, ignition/reaction aids, inlet-combustor interactions, and engine performance in terms of thrust balance measurements and internal pressure and heating rate distributions. The relationship of these results to flight engine performance is discussed.

Guy, R. W.↗
NASA NTRS1979

Combustor modelling for scramjet engines

A system of computer programs is being developed to analyse and predict the complex flow fields found in hydrogen-fueled scramjet combustors. Each program is designed to solve the governing equation system for the type of flow present in a particular combustor region. A two-dimensional parabolic program has been found to be valuable in the development and experimental evaluation of turbulence and chemistry models for supersonic flow, and in the development of a program to model supersonic flow downstream of the fuel injection struts by means of solutions to the three-dimensional parabolic Navier-Stokes equations and species equations. A partially elliptic code has been derived to account for local subsonic flow regions, and fully elliptic programs have been developed by the consideration of streamwise diffusion effects for the recirculating flow fields near transverse fuel injectors. The programs are currently being applied to problems of scramjet engine development.

Drummond, J. P.↗
NASA NTRS1980

Conceptual model of turbulent flameholding for scramjet combustors

New concepts and approaches to scramjet combustor design are presented. Blowoff was from failure of the recirculation-zone (RZ) flame to reach the dividing streamline (DS) at the rear stagnation zone. Increased turbulent exchange across the DS helped flameholding due to forward movement of the flame anchor point inside the RZ. Modeling of the blowoff phenomenon was based on a mass conservation concept involving the traverse of a flame element across the RZ and a flow element along the DS. The scale required to achieve flameholding, predicted by the model, showed a strong adverse effect of low pressure and low fuel equivalence ratio, moderate effect of flight Mach number, and little effect of temperature recovery factor. Possible effects of finite rate chemistry on flameholding and flamespreading in scramjets are discussed and recommendations for approaches to engine combustor design as well as for needed research to reduce uncertainties in the concepts are made.

Huber, P. W.↗
NASA NTRS1980

Flameholding characteristics of a swept-strut H2 fuel-injector for scramjet applications

A series of direct-connect tests are conducted which simulate the flow around the center swept-strut fuel-injector of a scramjet engine module. The experimental geometry includes both perpendicular and parallel fuel injectors which are swept with respect to the upstream flow direction in a manner simulating the flow geometry in the combustion region of the scramjet module. Seven different strut injector geometries are evaluated for their performance, flameholding, and inlet-combustor interaction characteristics. The most efficient combustion process is exhibited by the configuration having the deepest step with perpendicular injector orifices located 3.5 to 4.5 step heights downstream from the step. However, long centerbody and staged injection configurations perform as equally well as the deep step configuration when evaluating only the amount of perpendicular fuel injection. Since the staged injection configuration exhibits the lowest ignition and flameholding limit, it is suggested that the optimum injection configuration should incorporate a deep step with staged injection in order to improve the low temperature autoignition-flameholding characteristics.

Northam, G. B.↗
NASA NTRS1981

Numerical study of a scramjet engine flow field

A computer program has been developed to analyze the turbulent reacting flow field in a two-dimensional scramjet engine configuration. The program numerically solves the full two-dimensional Navier-Stokes and species equations in the engine inlet and combustor, allowing consideration of flow separation and possible inlet-combustor interactions. The current work represents an intermediate step towards development of a three-dimensional program to analyze actual scramjet engine flow fields. Results from the current program are presented that predict the flow field for two inlet-combustor configurations, and comparisons of the program with experiment are given to allow assessment of the modeling that is employed.

Drummond, J. P.↗
NASA NTRS1982

Three-dimensional inviscid analysis of the scramjet inlet flow field

A computer code has been developed to analyze the inviscid flow field in a supersonic combustion ramjet (scramjet) inlet. The code uses the three-dimensional Euler equations in full conservation form to describe the inlet flow. An algebraic numerical coordinate transformation is used to generate a set of boundary-fitted curvilinear coordinates. The governing equations are solved by a time-asymptotic, unsplit, two-step, finite-difference method. This method is highly efficient on the vector processing computers for which the current code is written. Detailed results are presented for two scramjet inlet configurations over a range of Mach numbers. The calculated results are compared with the available experimental and theoretical results.

Kumar, A.↗
NASA NTRS1983

Numerical analysis of a scramjet inlet flow field using the three-dimensional Navier-Stokes equations

A computer program has been developed to analyze supersonic combustion ramjet (scramjet) inlet flow fields. The program solves the three-dimensional Euler or Navier-Stokes equations in full conservation form by a well-known explicit, predictor-corrector technique. Turbulence is modeled by an algebraic eddy-viscosity model. Detailed laminar and turbulent flow results are presented for a symmetric wedge corner and a comparison is made with the available experimental results to allow assessment of the program. Results are then presented for an actual scramjet inlet configuration.

Kumar, A.↗
NASA NTRS1985

Computational analysis of scramjet dual mode operation

One critical element in the design of a Scramjet is the detailed understanding of the complex flow field in the engine during various phases of operation. One area of interest is the computation of chemically reacting flows in the vicinity of flame holders. The characteristics of a method for solving the Navier-Stokes equations with chemical reactions are proposed. Also of interest are the flame holding characteristics of simple ramp and rearward facing steps. Both of these configurations are considered candidates for Scramjet flame holders.

Source record↗
NASA NTRS1985

Langley Mach 4 scramjet test facility

An engine test facility was constructed at the NASA Langley Research Center in support of a supersonic combustion ramjet (scramjet) technology development program. Hydrogen combustion in air with oxygen replenishment provides simulated air at Mach 4 flight velocity, pressure, and true total temperature for an altitude range from 57,000 to 86,000 feet. A facility nozzle with a 13 in square exit produces a Mach 3.5 free jet flow for engine propulsion tests. The facility is described and calibration results are presented which demonstrate the suitability of the test flow for conducting scramjet engine research.

Earl H Andrews Jr.↗
NASA NTRS1987

Silane as an ignition aid in scramjets

This paper presents the results of experiments on silane/hydrogen combustion in a scramjet model configured as a constant area duct with a central injector. Intake flow conditions were created by free piston shock tunnels with simulated flight speeds ranging between 1.4 and 4.2 km/s. Intake conditions were restricted to three nominal Mach numbers. Boundary layer heating appeared to be responsible for ignition at low temperature, high Mach number conditions. Concentration of silane in hydrogen was varied, as well as intake temperature and pressure. Results indicated that silane in concentrations as low as 2.5 percent in hydrogen, was effective as a fuel additive for scramjets at conditions where hydrogen alone could not support combustion. An unsteady effect was observed as the intake temperature approached the lower limit for combustion. The combustion temperature limit rose significantly as the intake pressure was reduced to low levels. Computer simulations using a one dimensional premixed analysis suggested that although silane enhanced the combustion process, it was strongly dependent on the initial concentration of free radical oxygen. Results from the simulations were comparable to experimental results for some conditions.

Morris, N. A.↗
NASA NTRS1987

A mixing augmentation technique for hypervelocity scramjets

The paper discusses mixing problems in hypervelocity scramjet combustors. Techniques for providing turbulence and/or mixing enhancement are described. One such technique, the oscillating shock interaction, is studied numerically and options for producing oscillatory shock waves for mixing augmentation in scramjet combustors are discussed.

Kumar, A.↗
NASA NTRS1987

Test flow calibration study of the Langley Arc-Heated Scramjet Test Facility

The test flow at the exits of two square cross-section contoured nozzles with nominal exit Mach numbers of 4.7 and 6 has been studied as calibration data for the NASA-Langley Arc-Heated Scramjet Test Facility over simulated flight conditions from Mach 5.5 (at altitudes from 98,600-128,000 ft) to Mach 7 (at altitudes from 108,000-149,000 ft). Nozzle exit contour maps of measured thermodynamic properties, calculated Mach number, and calculated mass flow are used to determine the mass flow approaching the inlets of various scramjet engines. Good agreement is found between experimentally measured facility total mass flow and facility total mass flow determined by integration of the nozzle exit mass flow contours.

Thomas, Scott R.↗
NASA NTRS1987

Hydrogen scramjet with sidewall injection - Shock tunnel simulations

A free-piston shock tunnel has been used to obtain test data on a scramjet combustion chamber with sidewall injection. The results obtained indicate that combustion was strongly influenced by a region of fuel whose temperature was held below its ignition temperature by wall-cooling effects; this increased the fraction of unburned fuel and resulted in a significant loss of specific impulse. Aerodynamic heating would keep the walls above hydrogen ignition temperature in an actual scramjet powerplant, however. Maximum specific impulse was obtained with a combination of parallel and transverse injection in a long combustion chamber, followed by a dual stage expansion.

Morgan, R. G.↗
NASA NTRS1988

An analytical study of the hydrogen-air reaction mechanism with application to scramjet combustion

A chemical kinetic mechanism for the combustion of hydrogen has been assembled and optimized by comparing the observed behavior as determined in shock tube and flame studies with that predicted by the mechanism. The reactions contained in the mechanism reflect the current state of knowledge of the chemistry of the hydrogen/air system, and the assigned rate coefficients are consistent with accepted values. It was determined that the mechanism is capable of satisfactorily reproducing the experimental results for a range of conditions relevant to scramjet combustion. Calculations made with the reaction mechanism for representative scramjet combustor conditions at Mach 8, 16, and 25 showed that chemical kinetic effects can be important and that combustor models which use nonequilibrium chemistry should be used in preference to models that assume equilibrium chemistry. For the conditions examined the results also showed the importance of including the HO2 chemistry in the mechanism. For Mach numbers less than 16, the studies suggest that an ignition source will most likely be required to overcome slow ignition chemistry. At Mach 25, the initial temperature and pressure was high enough that ignition was rapid and the presence of an ignition source did not significantly affect reaction rates.

Jachimowski, Casimir J.↗
NASA NTRS1986

Hydrogen scramjet with side wall injection

Preliminary results are presented from an experimental evaluation of a hydrogen-burning wall-injection scramjet engine, performed in the free-piston shock tunnel at the Australian National University. The advantages of scramjet propulsion for high-Mach-number high-altitude flight are reviewed, and the need for an alternative to injection struts is indicated. Pressure profiles and heat-transfer measurements for constant-area and diverging ducts are presented graphically and characterized in detail. The ability of the injected flow to shield the chamber wall from the heat of the freestream flow is demonstrated. The extrapolation of the shock-tunnel results to flight conditions, however, is made difficult by the fact that a significant amount of fuel passes through a quenched zone without burning, seriously degrading overall performance.

Morgan, R. G.↗
NASA NTRS1988

Wave processes in scramjet thrust generation

The investigation explores the steady, supersonic expansion and compression wave processes involved in generating thrust from a combustion jet in a two-dimensional scramjet. Two types of thrust generating wave are produced by the jet. The first is the injection compression waves associated with injection and combustion of the fuel, and the second is the expansion interaction waves associated with interaction between the exhaust nozzle expansion and the jet. Analysis shows that the strength of a wave is not modified by crossing the jet, which implies that, with a given flow configuration, the jets in a multiple jet combustion array produce thrust independently of one another. Shock tunnel experiments with hydrogen fuel and three simple scramjet configurations are used to identify the two types of waves, to confirm the effect on a wave of crossing the jet, and to demonstrate the influence of the basic, fuel-off flow configuration on the effects produced by the waves.

Stalker, R. J.↗
NASA NTRS1987

High Reynolds number heat transfer to the cold walls of a model scramjet

The results of simultaneous heat transfer and pressure measurements at the walls of three different configurations of a model scramjet are presented. The heat transfer results are compared with results empirically predicted from the pressure measurements. It is shown that the measured heat transfer rate is comparable with, or lower than, that predicted for a laminar boundary layer. A mathematical model is proposed for the film-cooling effect observed when a hydrogen fuel is injected along a wall of the scramjet. In this mathematical model, the heat transfer rate is shown to be insensitive to the velocity profile in the insulating layer of fuel. The model suggests that the cooling layer is turbulent and that 90 percent of the fuel is mixed with the air.

Paull, A.↗
NASA NTRS1988

Inlet starting predictions for sidewall-compression scramjet inlets

While inlet capture, total pressure recovery, and compression are important performance parameters in the design of scramjet inlets, the inlet must be capable of starting. An analytical, inviscid method has been developed that provides first order starting information for sidewall-compression scramjet inlets and trends have been established for some of the parameters that affect inlet starting. These parameters include sidewall contraction ratio, cowl position, Mach number, sweep angle, fuel injection struts, and sidewall and strut compression angles. Results from the parametric study are compared with data from both no-strut and two-strut inlet models.

Trexler, Carl A.↗