Search NASA⌕ Search

SEARCH · Search NASA

Results for “Selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Extraordinary Thermal Stability and Sinter Resistance of Sub-2 nm Platinum Nanoparticles Anchored to a Carbon Support by Selenium

Nanoparticle sintering has long been a major challenge in developing catalytic systems for use at elevated temperatures. Here we report an in situ electron microscopy study of the extraordinary sinter resistance of a catalytic system comprised of sub-2 nm Pt nanoparticles on a Se-decorated carbon support. When heated to 700 °C, the average size of the Pt nanoparticles only increased from 1.6 to 2.2 nm, while the crystal structure, together with the {111} and {100} facets, of the Pt nanoparticles was well retained. Our electron microscopy analyses suggested that the superior resistance against sintering originated from the Pt–Se interaction. Confirmed by energy-dispersive X-ray elemental mapping and electron energy loss spectra, the Se atoms surrounding the Pt nanoparticles could survive the heating. This work not only offers an understanding of the physics behind the thermal behavior of this catalytic material but also sheds light on the future development of sinter-resistant catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Assessment of deep levels with selenium concentration in Cd 1–x Zn x Te 1–y Se y room temperature detector materials

Incorporation of Se into Cd 1–x Zn x Te (CZT) to form the quaternary compound semiconductor Cd 1–x Zn x Te 1–y Se y (CZTS) has proven to be an effective solution for compensating the major flaws associated with CZT, including poor homogeneity and high concentrations of electronically active deep levels that limit the performance of CZT detectors. In order to investigate how deep levels are affected by the Se concentration in CZTS, we performed photoinduced current transient spectroscopy (PICTS) measurements on CZTS crystals grown by the traveling heater method (THM) with 10% atomic Zn and varying atomic percentage of Se from 1.5% to 7.0%. The PICTS scans for up to 4% Se showed an exponential reduction in the capture cross section of deep levels associated with Te secondary phases in conjunction with an increase in a deep level positioned near the mid-gap, which initially increases the electron trapping time before degrading again at higher Se concentrations. The PICTS peaks present in 7% Se were anomalous relative to the other crystals and are expected to originate from transition metal impurities found in the lower-purity CdSe precursor material.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Rechargeable lithium sulfur and/or selenium battery

An electrochemical device includes a cathode comprising a first cathode component of lithium and Se x S y ; and a second cathode component of an alkali metal and/or alkaline earth metal sulfur and/or selenide, different from the first cathode component; an initial discharge product of a polyselenide and/or polysulfide anion charge compensated by an alkali metal and/or alkaline earth metal cation; an anode; a porous separator; and a non-aqueous electrolyte with one or more lithium salts, and one or more solvents; wherein the electrochemical device is a lithium sulfur and/or lithium selenide battery.

Li, Matthew↗
DOE OSTI2023

Flue-Gas Desulfurization Effluent Management using an Innovative Low-Energy Biosorpotion Treatment System to Remove Key Contaminants

Among the most critical water contaminants of concern affecting wide geographical regions and a number of industries and natural systems is selenium. Selenium found in surface, ground and wastewater in originates from natural sources, as well as industrial sources such as petroleum refineries, electronics manufacturing, pesticides, and coal power plants and mining also contribute to selenium contamination in water in the US. At high concentrations, selenium is toxic to human and wildlife. There are a number of technologies that have been used to treat selenium and other similar contaminants in water. Biological treatment of selenium has been used in the past to reduce soluble SeVI and/or SeIV to insoluble Se0, which is then filtered in the same vessel. The insoluble selenium (Se0) is then backwashed from the system and solids are separated for subsequent disposal, if they meet the leaching and water content criteria. In order to promote biological reduction to insoluble Se0, heating of bioreactor is needed in some applications, and excess food source (electron donor) is added so that all selenium can be filtered. An additional disadvantage of these systems is the significant amount of water lost due to extensive and frequent backwash and rinse cycles. When comparing the advantages and energy requirements of the various treatment technologies, RO membrane filtration immediately stands out due to the excessive energy expenditure needed to pump water across the membrane although RO is an effective way to remove selenium. In addition, RO requires extensive pretreatment, such as MF membrane, and frequent maintenance, rendering it an expensive option that may be out of reach for certain applications. In fact, although the performance was good during the pilot testing by the NSMP Working Group for treatment naturally occurring selenium in the surface water, the high electricity requirements and significant reject water stream made it an infeasible alternative. While conventional ion exchange maybe an effective treatment option, it requires frequent regeneration of the resin when applied to highly contaminated water, which leads to several tons of contaminant-laden, high-salinity brine that needs to be disposed off-site each day. One of the water systems in the west coast currently uses ion exchange for selenium treatment and has been trucking selenium laden hazardous brine waste weekly in the last several years. Pneumatic pumping and rinse water pumping required for ion exchange also increase the energy usage. In comparison, adsorption process is a passive treatment system where contaminated water comes in contact with an adsorption media in a vessel. Typically, there is no mixing, backwash, or recycle pumping required, thus significantly reducing the energy usage. A passive single-use adsorption system does not require backwash, thereby generating small amount of process waste, and producing the highest water yield among the alternatives. The energy and water efficiencies, and applicability for SeVI and SeIV are summarized in Table 1. Despite these benefits though, adsorption typically does not work for the most oxidized form of selenium (SeVI). The innovative biosorption process integrates both process to increase the treatment efficiency while minimizing energy, chemical, and time required to treat both SeVI and SeIV. Additional advantages include simple partial biological reduction with reduced on-site waste generation, which lead to water and electricity savings, and less operational need compared to biological treatment alone. This makes biosorption especially suitable for remote areas, where liquid backwash and brine disposal may be cost prohibitive or infeasible.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Reduction of selenite by bacterial exudates

Bacterial reduction of Se(IV) is a significant component of the global selenium cycle, and hence affects the fate and transport of selenium in both natural and contaminated environments. However, it is unknown whether bacterially-produced exudates are capable of reducing selenium independent of bacterial cells. In this study, we measured the rate and extent of Se(IV) reduction by exudates from three bacterial species, and we determined the importance of exudate sulfhydryl sites by conducting parallel experiments after treatment of the exudates with a sulfhydryl-specific blocking molecule. Here, we also conducted experiments with whole cell biomass for each of the three bacterial species to determine the importance of exudate-only reduction relative to whole biomass-promoted reduction. Under our experimental conditions, exudates from Bacillus subtilis and Pseudomonas putida remove Se(IV) from solution after an approximately 20-24 h lag period, but exudates from Shewanella oneidensis are ineffective at Se(IV) removal, except when the cells are grown in the presence of Se(IV). For both B. subtilis and P. putida , pretreatment blocking of the sulfhydryl sites on the exudate molecules dramatically decreases the rate and extent of Se(IV) removal, strongly suggesting that sulfhydryl groups on the exudate molecules play a key role in the Se(IV) reduction mechanism. The behavior of S. oneidensis exudates indicates that up-regulation of the Se(IV) reduction mechanism can occur in response to the Se content of the medium in which the cells grow. Our results demonstrate the capacity of some bacterial exudates to reduce Se(IV), and suggest that the activity of bacterial exudates should be accounted for when modeling selenium cycling in natural and engineered environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Evidence of Buried Junctions in CdSeTe Absorbers

The introduction of selenium band gap gradients has been shown to be a promising path for improving CdTe devices. Controlling maximum selenium concentration during deposition should allow for better device performance. In this work cross-section electron beam induced current (EBIC) maps were measured for CdSeTe/CdTe devices with as-grown selenium concentration between 0 and 20 percent. Measured EBIC profiles show high collection in the middle of the absorber layer, which differs from past EBIC studies of CdSe/CdTe devices. Increasing as-deposited selenium concentrations resulted in increased collection at this mid-absorber location. Combined with a 2-dimensional numerical model, these results suggest a buried homo-junction in the absorber layer of the device. This buried junction may be associated with a number of composition dependent parameters including electron affinity and p-dopability. Understanding this collection profile and its implications for device performance may be key in optimizing CdSeTe/CdTe devices.

CdSeTe↗
DOE OSTI2020

Direct Observation of Methylmercury and Auranofin Binding to Selenocysteine in Thioredoxin Reductase

Selenoenzymes, containing a selenocysteine (Sec) residue, fulfill important roles in biology. The mammalian thioredoxin reductase selenoenzymes are key regulators of antioxidant defense and redox signaling and are inhibited by methylmercury species and by the gold-containing drug auranofin. It has been proposed that such inhibition is mediated by metal binding to Sec in the enzyme. However, direct structural observations of these classes of inhibitors binding to selenoenzymes have been few to date. Here we therefore have used extended X-ray absorption fine structure as a direct structural probe to investigate binding to the selenium site in recombinant rat thioredoxin reductase 1 (TrxR1). The results demonstrate for the first time the direct and complete binding of the metal atom of the inhibitors to the selenium atom in TrxR1 for both methylmercury and auranofin, indicating that TrxR1 inhibition indeed can be attributed to such direct metal–selenium binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

One-step sputtering of MoSSe metastable phase as thin film and predicted thermodynamic stability by computational methods

Abstract We present the fabrication of a MoS 2−x Se x thin film from a co-sputtering process using MoS 2 and MoSe 2 commercial targets with 99.9% purity. The sputtering of the MoS 2 and MoSe 2 was carried out using a straight and low-cost magnetron radio frequency sputtering recipe to achieve a MoS 2−x Se x phase with x = 1 and sharp interface formation as confirmed by Raman spectroscopy, time-of-flight secondary ion mass spectroscopy, and cross-sectional scanning electron microscopy. The sulfur and selenium atoms prefer to distribute randomly at the octahedral geometry of molybdenum inside the MoS 2−x Se x thin film, indicated by a blue shift in the A 1g and E 1 g vibrational modes at 355 cm −1 and 255 cm −1 , respectively. This work is complemented by computing the thermodynamic stability of a MoS 2−x Se x phase whereby density functional theory up to a maximum selenium concentration of 33.33 at.% in both a Janus-like and random distribution. Although the Janus-like and the random structures are in the same metastable state, the Janus-like structure is hindered by an energy barrier below selenium concentrations of 8 at.%. This research highlights the potential of transition metal dichalcogenides in mixed phases and the need for further exploration employing low-energy, large-scale methods to improve the materials’ fabrication and target latent applications of such structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Chalcogen isotopes reveal limited volatile contribution from late veneer to Earth

The origin of Earth’s volatile elements is highly debated. Comparing the chalcogen isotope ratios in the bulk silicate Earth (BSE) to those of its possible building blocks, chondritic meteorites, allows constraints on the origin of Earth’s volatiles; however, these comparisons are complicated by potential isotopic fractionation during protoplanetary differentiation, which largely remains poorly understood. Using first-principles calculations, we find that core-mantle differentiation does not notably fractionate selenium and tellurium isotopes, while equilibrium evaporation from early planetesimals would enrich selenium and tellurium in heavy isotopes in the BSE. The sulfur, selenium, and tellurium isotopic signatures of the BSE reveal that protoplanetary differentiation plays a key role in establishing most of Earth’s volatile elements, and a late veneer does not substantially contribute to the BSE’s volatile inventory.

58 GEOSCIENCES↗