Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shaker”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1970

XB-70 aerodynamic, geometric, mass, and symmetric structural mode data

XB-70-1 mass, structural, and aerodynamic data were updated to reflect as closely as possible the characteristics of the airplane at three specific flight conditions which were actually flown; a nominal Mach number of 0.90 at an altitude of 25,000 feet (two cases) and a nominal Mach number of 1.6 at an altitude of 40,000 feet (one case). In-flight response characteristics at a number of points on the vehicle were obtained by exciting a pair of shaker vanes on the nose of the airplane. Data were recorded with the basic stability augmentation system (SAS) operating both alone and together with the identical location of accelerometer and force (ILAF) structural mode control system. Detailed total vehicle weight, mass characteristics, structural frequencies, generalized masses, all aerodynamic data used in the present analyses, and a description of the actual mode shapes are tabulated and presented.

Wykes, J. H.↗
NASA NTRS1972

Actuator participation in a bending mode identification system

A hydraulic actuator designed for a thrust vector control system used as a shaker for a vehicle to determine the bending mode frequencies is described. The actuator is used as the prime mover and the frequency sensor for the flexible vehicle in a test tower. Advantages in using the actuator piston position with respect to a commanded position to obtain the bending mode frequencies are shown.

Thompson, Z.↗
NASA NTRS1973

Dynamic testing of complex structures

Response of structure is determined under impulses large enough to create severe strains. Electrodynamic shaker can provide impulses to nearly any point on structure and can deliver repeated pulses of varying force and duration.

Birs, C.↗
NASA NTRS1972

Effect of vertical active vibration isolation on tracking performance and on ride qualities

An investigation to determine the effect on pilot performance and comfort of an active vibration isolation system for a commercial transport pilot seat is reported. The test setup consisted of: a hydraulic shaker which produced random vertical vibration inputs; the active vibration isolation system; the pilot seat; the pilot control wheel and column; the side-arm controller; and a two-axis compensatory tracking task. The effects of various degrees of pilot isolation on short-term (two-minute) tracking performance and comfort were determined.

Dimasi, F. P.↗
NASA NTRS1973

Vibration

Man's reactions to vibration are emphasized rather than his reactions to the vibrational characteristics of vehicles. Vibrational effects studies include: performance effects reflected in tracking proficiency, reaction time, visual impairment, and other measures related to man's ability to control a system; physiological reactions; biodynamic responses; subjective reactions; and human tolerance limits. Technological refinements in shaker systems and improved experimental designs are used to validate the data.

Hornick, R. J.↗
NASA NTRS1974

Forced vibrations of multi-component compliant tanks and feedlines

An analytical and experimental research program was performed to investigate the effects of flexible tanks and lines and the total system dynamic response of a simple physical system which had some of the essential features of a liquid-fueled launch vehicle. Several vessel-wall materials were used to obtain a range of elastic moduli. Water was used to simulate the fuel and an electromagnetic shaker provided external excitation such as might originate from a rocket-propulsion system. Experimental data were compared to values obtained from mathematical models for the many degree-of-freedom lumped-mass representation.

Smith, H. W.↗
NASA NTRS1974

The response of rotating machinery to external random vibration

A high-speed turbogenerator employing gas-lubricated hydrodynamic journal and thrust bearings was subjected to external random vibrations for the purpose of assessing bearing performance in a dynamic environment. The pivoted-pad type journal bearings and the step-sector thrust bearing supported a turbine-driven rotor weighing approximately twenty-one pounds at a nominal operating speed of 36,000 rpm. The response amplitudes of both the rigid-supported and flexible-supported bearing pads, the gimballed thrust bearing, and the rotor relative to the machine casing were measured with capacitance type displacement probes. Random vibrations were applied by means of a large electrodynamic shaker at input levels ranging between 0.5 g (rms) and 1.5 g (rms). Vibrations were applied both along and perpendicular to the rotor axis. Response measurements were analyzed for amplitude distribution and power spectral density. Experimental results compare well with calculations of amplitude power spectral density made for the case where the vibrations were applied along the rotor axis. In this case, the rotor-bearing system was treated as a linear, three-mass model.

Tessarzik, J. M.↗
NASA NTRS1973

A novel triaxial vibration test technique

The present work examines the circumstances under which simultaneous multiaxial vibration testing may be desirable, the testing techniques and equipment required to make it feasible, and the type of results that may be obtained together with some practical limitations to the techniques. Two schemes for performing vibration testing simultaneously or sequentially along three mutually perpendicular axes are considered and the most promising, involving a 'floating' technique, is presented in some detail. Practical problems associated with jig design and system resonances, cross-coupling between the various degrees of freedom, secondary loads on shaker elements, and system drift, are considered and workable solutions proposed. A simple simulation of multiaxial testing of a 1.1-pound inertia-simulated model of an Apollo command module is presented.

Wignot, J. E.↗
NASA NTRS1975

Two-directional active damper

Damper system to be used in studies of payload isolation technology is suitable as a laboratory apparatus. It provides easily adjustable damping and acts as multichannel shaker system.

Chang, C. S.↗
NASA NTRS1975

A flight investigation of oscillating air forces: Equipment and technique

The equipment and techniques are described which are to be used in a project aimed at measuring oscillating air forces and dynamic aeroelastic response of a swept wing airplane at high subsonic speeds. Electro-hydraulic inertia type shakers installed in the wing tips will excite various elastic airplane modes while the related oscillating chordwise pressures at two spanwise wing stations and the wing mode shapes are recorded on magnetic tape. The data reduction technique, following the principle of a wattmeter harmonic analyzer employed by Bratt, Wight, and Tilly, utilizes magnetic tape and high speed electronic multipliers to record directly the real and imaginary components of oscillatory data signals relative to a simple harmonic reference signal. Through an extension of this technique an automatic flight-flutter-test data analyzer is suggested in which vector plots of mechanical admittance or impedance would be plotted during the flight test.

Reed, W. H., III↗
NASA NTRS1975

Modal test - Measurement and analysis requirements

Data from the Viking Orbiter Modal Test Program are used to illustrate modal test measurement and analysis requirements. The test was performed using a multiple shake dwell technique where data were acquired one channel at a time and recorded on paper tape. Up to ten shakers were used simultaneously, with a complete set of data consisting of 290 strain-gage readings and 125 accelerometer readings. The data analysis provided information sufficient to minimize errors in the data. The list of analyses in order of value is orthogonality, residual mass, frequency sweep, data checks to assure good test data, multilevel trends, global kinetic energy, and global strain energy.

Wada, B. K.↗
NASA NTRS1976

Flight flutter testing technology at Grumman

Analysis techniques used in the automated telemetry station (ATS) for on line data reduction are encompassed in a broad range of software programs. Concepts that form the basis for the algorithms used are mathematically described. The control the user has in interfacing with various on line programs is discussed. The various programs are applied to an analysis of flight data which includes unimodal and bimodal response signals excited via a swept frequency shaker and/or random aerodynamic forces. A nonlinear response error modeling analysis approach is described. Preliminary results in the analysis of a hard spring nonlinear resonant system are also included.

Perangelo, H. J.↗
NASA NTRS1977

Thermally Driven Oscillations and Wave Motion of a Liquid Drop

In the state of Leidenfrost boiling, liquid drops are observed to vibrate in a variety of modal patterns. Theories are presented which predict the frequency of oscillation and show that the observed model patterns of drops correspond to the minimum energy oscillatory excitation state. High-speed photographic techniques were used to record these motions and substantiate the theories. An incipient temperature was also found for water drops in film boiling below which free oscillations do not exist. In addition to these oscillations, photographic sequences are presented which show that wave motion can exist along the circumference of the drop. Following the study of free oscillations, the system was mounted on a shaker table and the drop subjected to a range of forced frequencies and accelerations.

Baumeister, K. J.↗
NASA NTRS1977

Thermally driven oscillations and wave motion of a liquid drop

In the state of Leidenfrost boiling, liquid drops are observed to vibrate in a variety of modal patterns. Theories are presented which predict the frequency of oscillation and show that the observed modal patterns of drops correspond to the minimum energy oscillatory excitation state. High-speed photographic techniques were used to record these motions and substantiate the theories. An incipient temperature was also found for water drops in film boiling below which free oscillations do not exist. In addition to these oscillations, photographic sequences are presented which show that wave motion can exist along the circumference of the drop. Following the study of free oscillations, the system was mounted on a shaker table and the drop subjected to a range of forced frequencies and accelerations.

Baumeister, K. J.↗
NASA NTRS1979

Experimental Investigation of Launch Vehicle Transient Input Simulation in Payload Tests

The technique of electronically simulating the structural dynamics of a launch vehicle in transient tests of payloads using multiple vibration excitation systems was investigated. The development of computer programs to determine transfer functions, synthesize shaker forcing functions, and control vibration exciters is described. A demonstration test using the techniques was described and results are presented. The evaluation of the potential for applying this technique to large Shuttle payloads is discussed.

Rader, P.↗
NASA NTRS1979

An experimental study of propeller-induced structural vibration and interior noise

This paper presents results of tests conducted to study fuselage sidewall dynamics and their effects on the cabin interior noise of a twin-engine, propeller-driven, light aircraft. Data on the dynamic behavior were obtained by slowly sweeping the RPM of one of the engines while the aircraft was stationary on the ground. This technique allowed frequency response plots of the sidewall structural accelerations to be obtained. These accelerations are compared to similar results from a test using a mechanical shaker in order to evaluate the structural dynamic response caused by the harmonics of the propeller blade passage tone. The dynamic response of the fuselage sidewall is also discussed as a noise transmission mechanism. A second mechanism for noise transmission through the fuselage sidewall was investigated by opening the copilot's window. The results illustrate the complex nature of the noise transmission mechanisms and the importance of correctly assessing noise paths.

Howlett, J. T.↗
NASA NTRS1980

Active damping of modal vibrations by force apportioning

Force apportioning, a method of active structural damping based on that used in modal vibration testing of isolating modes by multiple shaker excitation, was analyzed and numerically simulated. A distribution of as few forces as possible on the structure is chosen so as to maximally affect selected vibration modes while minimally exciting all other modes. The accuracy of numerical simulations of active damping, active damping of higher-frequency modes, and studies of imperfection sensitivity are discussed. The computer programs developed are described and possible refinements of the research are examined.

Hallauer, W. L., Jr.↗
NASA NTRS1979

Noninvasive measures of bone bending rigidity in the monkey /M. nemestrina/

The in vivo bending rigidity and bone mineral content of monkey ulnae and tibiae were measured. Bending rigidity in the anteroposterior plane was measured by an impedance probe technique. Forced vibrations of the bones were induced with an electromechanical shaker, and force and velocity at the driving point were determined. The responses over the range of 100-250 Hz were utilized to compute the bending rigidity. Bone mineral content in the cross section was determined by a photon absorption technique. Seventeen male monkeys (Macaca nemestrina) weighing 6-14 kg were evaluated. Bending rigidity was correlated with the mineral content of the cross section, with a correlation coefficient of 0.899. Two monkeys were evaluated during prolonged hypodynamic restraint. Restraint produced regional losses of bone most obviously in the proximal tibia. The local bone mineral content declines 17 to 24% and the average bending rigidity declines 12 to 22%. Changes in bones leading to a reduction in mineral content and stiffness are discussed.

Young, D. R.↗