Results for “Significance Determination Process” — Page 6

NASA NTRS1993

Preliminary OARE absolute acceleration measurements on STS-50

On-orbit Orbital Acceleration Research Experiment (OARE) data on STS-50 was examined in detail during a 2-day time period. Absolute acceleration levels were derived at the OARE location, the orbiter center-of-gravity, and at the STS-50 spacelab Crystal Growth Facility. The tri-axial OARE raw acceleration measurements (i.e., telemetered data) during the interval were filtered using a sliding trimmed mean filter in order to remove large acceleration spikes (e.g., thrusters) and reduce the noise. Twelve OARE measured biases in each acceleration channel during the 2-day interval were analyzed and applied to the filtered data. Similarly, the in situ measured x-axis scale factors in the sensor's most sensitive range were also analyzed and applied to the data. Due to equipment problem(s) on this flight, both y- and z- axis sensitive range scale factors were determined in a separate process (using the OARE maneuver data) and subsequently applied to the data. All known significant low-frequency corrections at the OARE location (i.e., both vertical and horizontal gravity-gradient, and rotational effects) were removed from the filtered data in order to produce the acceleration components at the orbiter's center-of-gravity, which are the aerodynamic signals along each body axes. Results indicate that there is a force of unknown origin being applied to the Orbiter in addition to the aerodynamic forces. The OARE instrument and all known gravitational and electromagnetic forces were reexamined, but none produce the observed effect. Thus, it is tentatively concluded that the Orbiter is creating the environment observed.

Blanchard, Robert C.↗

NASA NTRS2013

What Are Space Exposure Histories Telling Us about CM Carbonaceous Chondrites?

Chondrites are chemically primitive and carbonaceous (C) chondrites are potentially the most primitive among them because they mostly escaped thermal metamor-phism that affected the other chondrite groups and ratios of their major, non-volatile and most of the volatile elements are similar to those of the Sun. Therefore, C chondrites are ex-pected to retain a good record of the origin and early history of the solar system. Carbonaceous chondrites are chemically differentiated from other chondrites by their high Mg/Si ratios and refractory elements, and have experienced various degrees of aqueous alteration. They are subdivided into eight subgroups (CI, CM, CO, CV, CK, CR, CB and CH) based on major element and oxygen isotopic ratios. Their elemental ratios spread over a wide range though those of ordinary and enstatite chondrites are relatively uniform. It is critical to know how many sepa-rate bodies are represented by the C chondrites. In this study, CM chondrites, the most abundant carbona-ceous chondrites, are examined. They are water-rich, chon-drule- and CAI-bearing meteorites and most of them are brec-cias. High-temperature components such as chondrules, iso-lated olivine and CAIs in CMs are frequently altered and some of them are replaced by clay minerals and surrounded by sul-fides whose Fe was derived from mafic silicates. On the basis of degrees of aqueous alteration, CMs have been classified into subtypes from 1 to 2, although Rubin et al. [1] assigned subtype 1 to subtype 2 and subtype 2 to subtype 2.6 using various petrologic properties. The classification is based on petrographic and mineralogic properties. For example, though tochilinite (2[(Fe, Mg, Cu, Ni[])S] 1.57-1.85 [(Mg, Fe, Ni, Al, Ca)(HH)2]) clumps are produced during aqueous alteration, they disappear and sulfide appears with increasing degrees of aqueous alteration. Cosmic-ray exposure (CRE) age measurements of CM chondrites reveal an unusual feature. Though CRE ages of other chondrite groups range from several Myr to tens of Myr, CMs exposure ages are not longer than 7 Myr with one-third of the CM having less than 1 Myr CRE age. For those CM chondrites that have CRE ages <1 Myr, there are two discern-able CRE peaks. Because a CRE age reflects how long a me-teorite is present as a separate body in space, the peaks pre-sumably represent collisional events on the parent body (ies) [2]. In this study we defined 4 distinct CRE age groups of CMs and systematically characterized the petrography in each of the 4 CRE age groups to determine whether the groups have significant petrographic differences, with such differences probably reflecting different parent body (asteroid) geological processing, or multiple original bodies.

Takenouchi, A.↗

NASA NTRS2014

On the Relationship between Cosmic Ray Exposure Ages and Petrography of CM Chondrites

Carbonaceous (C) chondrites are potentially the most primitive among chondrites because they mostly escaped thermal metamorphism that affected the other chondrite groups. C chondrites are chemically distinguished from other chondrites by their high Mg/Si ratios and refractory elements, and have experienced various degrees of aqueous alteration. They are subdivided into eight subgroups (CI, CM, CO, CV, CK, CR, CB and CH) based on major element and oxygen isotopic ratios. Their elemental ratios vary over a wide range, in contrast to those of ordinary and enstatite chondrites which are relatively uniform. It is critical to know how many separate bodies are represented by the C chondrites. In this study we defined 4 distinct cosmic-ray exposure (CRE) age groups of CMs and systematically characterized the petrography in each of the 4 CRE age groups to determine whether the groups have significant petrographic differences with such differences probably reflecting different parent body (asteroid) geological processing, or multiple original bodies. We have reported the results of a preliminary grouping at the NIPR Symp. in 2013 [3], however, we revised the grouping and here report our new results.

Takenouchi, A.↗

NASA NTRS2014

Results of Propellant Mixing Variable Study Using Precise Pressure-Based Burn Rate Calculations

A designed experiment was conducted in which three mix processing variables (pre-curative addition mix temperature, pre-curative addition mixing time, and mixer speed) were varied to estimate their effects on within-mix propellant burn rate variability. The chosen discriminator for the experiment was the 2-inch diameter by 4-inch long (2x4) Center-Perforated (CP) ballistic evaluation motor. Motor nozzle throat diameters were sized to produce a common targeted chamber pressure. Initial data analysis did not show a statistically significant effect. Because propellant burn rate must be directly related to chamber pressure, a method was developed that showed statistically significant effects on chamber pressure (either maximum or average) by adjustments to the process settings. Burn rates were calculated from chamber pressures and these were then normalized to a common pressure for comparative purposes. The pressure-based method of burn rate determination showed significant reduction in error when compared to results obtained from the Brooks' modification of the propellant web-bisector burn rate determination method. Analysis of effects using burn rates calculated by the pressure-based method showed a significant correlation of within-mix burn rate dispersion to mixing duration and the quadratic of mixing duration. The findings were confirmed in a series of mixes that examined the effects of mixing time on burn rate variation, which yielded the same results.

Stefanski, Philip L.↗

NASA NTRS1987

Superthermal electron processes in the upper atmosphere of Uranus: Aurora and electroglow

Strong ultraviolet emissions from the upper atmosphere of Uranus suggest that both auroral and electroglow phenomena are of significant aeronomical consequences in the structure of the upper atmosphere. Combined modeling and data analysis were performed to determine the effect of electroglow and auroral phenomena on the global heat and atomic hydrogen budgets in the Uranus upper atmosphere. The results indicate that the auroral and electroglow heat sources are not adequate to explain the high exospheric temperature observed at Uranus, but that the atomic hydrogen supplied by these processes is more than sufficient to explain the observations. The various superthermal electron distributions modeled have significantly different efficiencies for the various processes such as UV emission, heating, ionization, and atomic hydrogen production, and produce quite different H2 band spectra. However, additional information on the UV spectra and global parameters is needed before modeling can be used to distinguish between the possible mechanisms for electroglow.

Waite, J. H., Jr.↗

NASA NTRS1988

Superthermal electron processes in the upper atmosphere of Uranus - Aurora and electroglow

Strong ultraviolet emissions from the upper atmosphere of Uranus suggest that both auroral and electroglow phenomena are of significant aeronomical consequences in the structure of the upper atmosphere. Combined modeling and data analysis were performed to determine the effect of electroglow and auroral phenomena on the global heat and atomic hydrogen budgets in the Uranus upper atmosphere. The results indicate that the auroral and electroglow heat sources are not adequate to explain the high exospheric temperature observed at Uranus, but that the atomic hydrogen supplied by these processes is more than sufficient to explain the observations. The various superthermal electron distributions modeled have significantly different efficiencies for the various processes such as UV emission, heating, ionization, and atomic hydrogen production, and produce quite different H2 band spectra. However, additional information on the UV spectra and global parameters is needed before modeling can be used to distinguish between the possible mechanisms for electroglow.

Waite, J. H., Jr.↗

NASA NTRS2016

Risk of Performance Decrement and Crew Illness Due to an Inadequate Food System

NASA is preparing for long duration manned missions beyond low-Earth orbit that will be challenged in several ways, including long-term exposure to the space environment, impacts to crew physiological and psychological health, limited resources, and no resupply. The food system is one of the most significant daily factors that can be altered to improve human health, and performance during space exploration. Therefore, the paramount importance of determining the methods, technologies, and requirements to provide a safe, nutritious, and acceptable food system that promotes crew health and performance cannot be underestimated. The processed and prepackaged food system is the main source of nutrition to the crew, therefore significant losses in nutrition, either through degradation of nutrients during processing and storage or inadequate food intake due to low acceptability, variety, or usability, may significantly compromise the crew's health and performance. Shelf life studies indicate that key nutrients and quality factors in many space foods degrade to concerning levels within three years, suggesting that food system will not meet the nutrition and acceptability requirements of a long duration mission beyond low-Earth orbit. Likewise, mass and volume evaluations indicate that the current food system is a significant resource burden. Alternative provisioning strategies, such as inclusion of bioregenerative foods, are challenged with resource requirements, and food safety and scarcity concerns. Ensuring provisioning of an adequate food system relies not only upon determining technologies, and requirements for nutrition, quality, and safety, but upon establishing a food system that will support nutritional adequacy, even with individual crew preference and self-selection. In short, the space food system is challenged to maintain safety, nutrition, and acceptability for all phases of an exploration mission within resource constraints. This document presents the evidence for the Risk of Performance Decrement and Crew Illness Due to an Inadequate Food System and the gaps in relation to exploration, as identified by the NASA Human Research Program (HRP). The research reviewed here indicates strategies to establish methods, technologies, and requirements that increase food stability, support adequate nutrition, quality, and variety, enable supplementation with grow-pick-and-eat salad crops, ensure safety, and reduce resource use. Obtaining the evidence to establish an adequate food system is essential, as the resources allocated to the food system may be defined based on the data relating nutritional stability and food quality requirements to crew performance and health.

Douglas, Grace L.↗

NASA NTRS1993

Airflow sensing system

Disclosed is an airflow sensing system for determining the type of airflow flowing over a flight surface. A hot film sensor is driven by a constant voltage feedback circuit that maintains the voltage across the sensor at a predetermined level. A signal processing circuit receives an output signal of the feedback circuit and determines whether the output signal is indicative of laminar, transitional or turbulent airflow. Transitional airflow is distinguished from turbulent airflow by a signal having significant energy in a low-frequency passband from 50-80 Hz. The signal processing circuit drives a three-color LED display to provide a visual indication of the type of airflow being sensed.

Gelbach, Herman R.↗

NASA NTRS2014

User Needs and Assessing the Impact of Low Latency NASA Earth Observation Data Availability on Societal Benefit

Since the advent of NASA's Earth Observing System, knowledge of the practical benefits of Earth science data has grown considerably. The community using NASA Earth science observations in applications has grown significantly, with increasing sophistication to serve national interests. Data latency, or how quickly communities receive science observations after acquisition, can have a direct impact on the applications and usability of the information. This study was conducted to determine how users are incorporating NASA data into applications and operational processes to benefit society beyond scientific research, as well as to determine the need for data latency of less than 12 h. The results of the analysis clearly show the significant benefit to society of serving the needs of the agricultural, emergency response, environmental monitoring and weather communities who use rapidly delivered, accurate Earth science data. The study also showed the potential of expanding the communities who use low latency NASA science data products to provide new ways of transforming data into information. These benefits can be achieved with a clear and consistent NASA policy on product latency.

NASA↗

NASA NTRS1975

Apollo experience report: Spacecraft relative motion and recontact analyses

Potential collision or accidental recontact problems between the spacecraft and other space vehicles (or components) existed during most of the Apollo missions. These problems were identified before each Apollo flight, and appropriate solutions for eliminating or minimizing the chance of collision were determined through relative motion analyses. A summary of the identification, solution, and analysis process for some of the more significant of these separation problems is presented. In addition, the scope of responsibility, the development of the study effort, and the computer simulation development, which supported the analysis process, are described.

Mcadams, R. E.↗

NASA NTRS1984

Performance evaluation and geologic utility of LANDSAT-4 TM and MSS data

Radiometric calibration accuracy of TM data, radiometric comparison of A-, B-, and P-format data, and geometric registration accuracy of the TM data at enlarged scales were analyzed. Radiometric analysis of the Wind River Basin, Wyoming scene demonstrates that the TM system can be used to extract image reflectance spectra from ground targets following calibration of the system. It was also demonstrated that: (1) image DN (radiance values) vs. ground reflectance calibration scatterplots yield parameters which can be used to constrain atmospheric models and can determine TM radiometric sensitivity; (2) no significant degradation occurs as a result of radiometric and geometric correction by SCROUNGE processing; and (3) TM data can be enlarged to 1:24000 with no major geometric distortions or misregistration problems to USGS topographic maps.

Paylor, E. D.↗

NASA NTRS1987

Perennial N2 supersaturation in an Antarctic lake

The results of a study are reported which, for the first time, documents the supersaturation of N2 in a lake. Dissolved N2 levels of 145 percent and 163 percent were determined for Antarctica's Lake Hoare from samples taken just below the ice cover and at a depth of 12 m, respectively. The relative importance of biological and abiological sources is reflected in the ratio of N2 concentration to O2 concentration. In Lake Hoare this ratio was 1.20 at the ice/water interface and 1.05 at 12 m, considerably different from the ratio in equilibrium with air (about 1.8). Based on these results, it is determined that about half of the net O2 production in the lake is the result of biological processes. The significance of these results for the putative ice-covered paleolakes in the canyon regions of Mars is discussed.

Wharton, Robert A., Jr.↗

NASA NTRS1992

Transient loads analysis for space flight applications

A significant part of the flight readiness verification process involves transient analysis of the coupled Shuttle-payload system to determine the low frequency transient loads. This paper describes a methodology for transient loads analysis and its implementation for the Spacelab Life Sciences Mission. The analysis is carried out using two major software tools - NASTRAN and an external FORTRAN code called EZTRAN. This approach is adopted to overcome some of the limitations of NASTRAN's standard transient analysis capabilities. The method uses Data Recovery Matrices (DRM) to improve computational efficiency. The mode acceleration method is fully implemented in the DRM formulation to recover accurate displacements, stresses, and forces. The advantages of the method are demonstrated through a numerical example.

Thampi, S. K.↗

NASA NTRS2003

Plasmaspheric Mass Loss and Refilling as a Result of a Magnetic Storm

Using the sounding measurements from the radio plasma imager on IMAGE, and a plasma density inversion algorithm, we derive the plasma density profiles along the magnetic field in a few L-shells every 14 hours at magnetic local noon before, during, and after the March 31,2001 magnetic storm. An empirical model of the plasmaspheric plasma density distribution is derived as a reference using the measurements before the storm. During the storm, the equatorial plasma was substantially depleted in a range of L-shells. The flux tubes were refilled after the storm. The filling ratio, the equatorial plasma density normalized by its quiet-time value before the storm, is introduced to assess the time evolution of the depletion and refilling processes. The depletion, more than two thirds of the quiet time content, appeared to occur rather quickly after the storm onset, as determined by the limited temporal resolution of the measurements. The refilling proceeded, although more slowly than the depletion process, significantly faster than the theoretical prediction of a 3-day time scale. Dynamic structures are observed in situ and confirmed by the extreme ultraviolet imager (EUV) measurements.

Reinisch, B. W.↗

NASA NTRSDate not supplied

L'Ralph's Advanced Thermal Model Correlation Using Veritrek

Thermal model correlation uses data from thermal balance tests to better estimate uncertain input parameter values. During the correlation process, input parameters are modified in an iterative manner which can become computationally expensive since this requires that the high-fidelity thermal model be run for each iteration. Depending on the number of thermal balance test points there can be many sets of correlation parameters that satisfy correlation criteria; and having enough data to ascertain the best set of correlation parameters to use, further increases the computational expense. Reduced-order models (ROMs) provide computationally efficient surrogates of high-fidelity models and are often built to reduce development cycle times and cost. By leveraging the speed of reduced-order models and the Correlation Analysis feature in the Veritrek software, the typical computational expense of a traditional thermal model correlation process can be significantly reduced and having access to hundreds of thousands of iteration results provides an advanced means of intelligently determining the best set of correlation parameters to use. The L’Ralph thermal team at NASA Goddard Space Flight Center explored the use of the Veritrek software for their thermal model correlation efforts. The ROM that was created allowed for the variation of 15 input parameters to match 70 temperature sensor readouts from 3 thermal balance plateus and required 125 runs of the high-fidelity Thermal Desktop® model to generate a ROM that could predict the detailed model’s results to within 0.2 K (RMS). The ROM was then used to find dozens of plausible correlation parameter values based on L’Ralph instrument test data within a few seconds. By providing several plausible correlation parameter combinations, Veritrek allowed the thermal team to explore different uncertain parameter value combinations and provided insight into how deterministic each input parameter was. This allowed for a more confident decision on the best set of correlation parameters to use, compared to traditional model correlation techniques. In this presentation, the L’Ralph thermal team will be presenting their experience with the Veritrek software and how the software was utilized to provide additional insights during the correlation process.

Daniel Bae↗

NASA NTRSDate not supplied

L'Ralph's Advanced Thermal Model Correlation Using Veritrek

Thermal model correlation uses data from thermal balance tests to better estimate uncertain input parameter values. During the correlation process, input parameters are modified in an iterative manner which can become computationally expensive since this requires that the high-fidelity thermal model be run for each iteration. Depending on the number of thermal balance test points there can be many sets of correlation parameters that satisfy correlation criteria; and having enough data to ascertain the best set of correlation parameters to use, further increases the computational expense. Reduced-order models (ROMs) provide computationally efficient surrogates of high-fidelity models and are often built to reduce development cycle times and cost. By leveraging the speed of reduced-order models and the Correlation Analysis feature in the Veritrek software, the typical computational expense of a traditional thermal model correlation process can be significantly reduced and having access to hundreds of thousands of iteration results provides an advanced means of intelligently determining the best set of correlation parameters to use. The L’Ralph thermal team at NASA Goddard Space Flight Center explored the use of the Veritrek software for their thermal model correlation efforts. The ROM that was created allowed for the variation of 15 input parameters to match 70 temperature sensor readouts from 3 thermal balance plateus and required 125 runs of the high-fidelity Thermal Desktop® model to generate a ROM that could predict the detailed model’s results to within 0.2 K (RMS). The ROM was then used to find dozens of plausible correlation parameter values based on L’Ralph instrument test data within a few seconds. By providing several plausible correlation parameter combinations, Veritrek allowed the thermal team to explore different uncertain parameter value combinations and provided insight into how deterministic each input parameter was. This allowed for a more confident decision on the best set of correlation parameters to use, compared to traditional model correlation techniques. In this presentation, the L’Ralph thermal team will be presenting their experience with the Veritrek software and how the software was utilized to provide additional insights during the correlation process. "

Daniel Bae↗

NASA NTRS2010

Phenylethynyl Terminated Imide (PETI) Composites Made by High Temperature Vartm

The use of composites as primary structures on aerospace vehicles has increased dramatically over the past decade. As these advanced structures increase in size and complexity, their production costs have grown significantly. A major contributor to these manufacturing costs is the requirement of elevated pressures, during high temperature processing, to create fully consolidated composite parts. Recently, NASA Langley has licensed a series of low viscosity Phenyl Ethynyl Terminated Imide, PETI, oligomers that possess a wide processing window to allow for Resin Transfer Molding, RTM, processing. These resins, PETI-8 and PETI-330, demonstrate void fractions of approx.1% under elevated pressure consolidation. However, when used with a standardized thermal curing cycle in a High Temperature Vacuum Assisted RTM (HT-VARTM) process, they display undesirable void contents in excess of 7%. It was determined previously that under the thermal cycles used for laminate fabrication, the phenylethynyl endcap underwent degradation leading to volatile evolution. Modifications to the processing cycle used in the laminate fabrication have reduced the void content significantly (typically less than 3%) for carbon fiber biaxially woven fabric. For carbon fiber uniaxial fabric, void contents of less than 2% have been obtained using both PETI-8 and PETI-330. The resins were infused into carbon fiber preforms at 260 C and cured between 316 C and 371 C. Photomicrographs of the panels were taken and void contents were determined by acid digestion. Mechanical properties of the panels were determined at both room and elevated temperatures. These include short beam shear and flexure tests. The results of this work are presented herein.

Ghose, Sayata↗

NASA NTRS1991

An evaluation of GTAW-P versus GTA welding of alloy 718

Mechanical properties were evaluated to determine statistically whether the pulsed current gas tungsten arc welding (GTAW-P) process produces welds in alloy 718 with room temperature structural performance equivalent to current Space Shuttle Main Engine (SSME) welds manufactured by the constant current GTAW-P process. Evaluations were conducted on two base metal lots, two filler metal lots, two heat input levels, and two welding processes. The material form was 0.125-inch (3.175-mm) alloy 718 sheet. Prior to welding, sheets were treated to either the ST or STA-1 condition. After welding, panels were left as welded or heat treated to the STA-1 condition, and weld beads were left intact or machined flush. Statistical analyses were performed on yield strength, ultimate tensile strength (UTS), and high cycle fatigue (HCF) properties for all the post welded material conditions. Analyses of variance were performed on the data to determine if there were any significant effects on UTS or HCF life due to variations in base metal, filler metal, heat input level, or welding process. Statistical analyses showed that the GTAW-P process does produce welds with room temperature structural performance equivalent to current SSME welds manufactured by the GTAW process, regardless of prior material condition or post welding condition.

Gamwell, W. R.↗