Search NASA⌕ Search

SEARCH · Search NASA

Results for “Size Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Evaporation from thin porous Coatings: Pore size effects and predictive equation for homogeneous coatings

Evaporation of small water droplets on solids is hindered because surface tension pulls the droplet into a spherical cap that has a small perimeter. Our solution is to coat a solid with a very thin, porous layer into which the droplet flows to create a large-area disk with concomitant high rate of evaporation. We investigate evaporation by varying factors that have not been previously considered: pore size and distribution, contact angle, temperature, and relative humidity (RH). A larger pore size resulted in faster evaporation, which we explain through faster transport within the coating. Even faster evaporation occurred for a bilayer structure with small particles on the air side and larger particles on the solid side. Further, the water advancing contact angle had an insignificant effect in the range from < 10° through to 60°. Our results for different pore sizes, temperature, humidity, and contact angle all collapse onto a single curve when appropriately normalized. This validates an equation that can be used for the evaporation from a homogeneous coating that depends only one empirical factor and the droplet volume. Since the volume is often user-controlled, we envisage that this equation can be used to predict evaporation and guide design of fast-drying coatings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

Droplet size effects on NO/x/ formation in a one-dimensional monodisperse spray combustion system

A one-dimensional monodisperse aerosol spray combustion facility is described and experimental results of post flame NO/NO(x) emissions are presented. Four different hydrocarbon fuels were studied: isopropanol, methanol, n-heptane, and n-octane. The results indicate an optimum droplet size in the range of 48-58 microns for minimizing NO/NO(x) production for all of the test fuels. This NO(x) behavior is associated with droplet interactions and the transition from diffusive type of spray burning to that of a prevaporized and premixed case. Decreasing the droplet size results in a trend of increasing droplet interactions, which suppresses temperatures and reduces NO(x). This trend continues until prevaporization effects begin to dominate and the system tends towards the premixed limit. The occurrence of the minimum NO(x) point at different droplet diameters for the different fuels appears to be governed by the extent of prevaporization of the fuel in the spray, and is consistent with theoretical calculations based on each fuel's physical properties.

Sarv, H.↗
DOE OSTI2024

Ideal conductor/dielectric model (ICDM): A generalized technique to correct for finite-size effects in molecular simulations of hindered ion transport

Molecular simulations serve as indispensable tools for investigating the kinetics and elucidating the mechanism of hindered ion transport across nanoporous membranes. In particular, recent advancements in advanced sampling techniques have made it possible to access translocation timescales spanning several orders of magnitude. In our prior study [Shoemaker et al., J. Chem. Theory Comput. 18, 7142 (2022)], we identified significant finite size artifacts in simulations of pressure-driven hindered ion transport through nanoporous graphitic membranes. We introduced the ideal conductor model, which effectively corrects for such artifacts by assuming the feed to be an ideal conductor. In the present work, we introduce the ideal conductor dielectric model (Icdm), a generalization of our earlier model, which accounts for the dielectric properties of both the membrane and the filtrate. Using the Icdm model substantially enhances the agreement among corrected free energy profiles obtained from systems of varying sizes, with notable improvements observed in regions proximate to the pore exit. Moreover, the model has the capability to consider secondary ion passage events, including the transport of a co-ion subsequent to the traversal of a counter-ion, a feature that is absent in our original model. We also investigate the sensitivity of the new model to various implementation details. The Icdm model offers a universally applicable framework for addressing finite size artifacts in molecular simulations of ion transport. It stands as a significant advancement in our quest to use molecular simulations to comprehensively understand and manipulate ion transport processes through nanoporous membranes.

Chemistry↗
NASA NTRS1960

Measurement of Screen-Size Effects on Intensity, Scale, and Spectrum of Turbulence in a Free Subsonic Jet

The results are reported of hot-wire anemometer measurements of the fluctuating longitudinal component of the turbulent velocities in the mean flow downstream of screens in an air jet. These measurements have been analyzed by well-established techniques to give the influence of tile screen mesh size on the turbulent intensity, scale, and the power-spectral-density. The results show a linear dependence of the intensity upon the screen mesh size for locations within the central core of the air jet. The spectral-density curves show that the screens redistribute the turbulent energy from the low frequencies (<1000 cps) to the high frequencies (>1000 cps). The effects of the screens are overwhelmed in the mixing region of the jet flow by the turbulence levels existing there. The large pressure drops occurring across the screens reduce the velocity of the jet as compared to the jet without screens by approximately one-third for the velocity and range of mesh sizes investigated and reported in this report. The turbulence scale is a linear function of distance from the nozzle exit and is somewhat greater than comparable jets without screens.

Howard, Charles D.↗
DOE OSTI2020

Investigating biomass composition and size effects on fast pyrolysis using global sensitivity analysis and CFD simulations

It is notoriously difficult to build an accurate universal model for biomass pyrolysis due to its sensitivity to a wide number of critical material attributes such as chemical species and physical sizes. In this work, a biomass pyrolysis kinetics with 32 heterogeneous reactions and 59 species was implemented in an open-source multiphase computational fluid dynamics (CFD) software MFiX and validated against two different experimental pyrolysis data sets that provided detailed data describing chemical component yields. The reaction scheme was then used to build a surrogate model and assess the sensitivity of pyrolysis yields to feedstock compositions. The sensitivity analysis determined that the yield of bio-char showed a strong positive sensitivity to the carbon-rich lignin and tannin pseudo-species in the reaction scheme while the bio-oil and bio-gas were correlated to oxygen-rich lignin pseudo-species. The reaction scheme was then integrated into a coarse-grained discrete element model to simulate fast pyrolysis in a bubbling fluidized bed over a range of feedstock particle sizes. The reactor simulations showed further sensitivity to particle size and hydrodynamics. Notably, particles under 0.5 mm have small heat transfer limitations but left the reactor before completely converting and thus reduced the bio-oil yield. Results from this study can be used to guide future development of highly accurate models for fast pyrolysis reactors with a variety of feedstock properties and operating conditions.

09 BIOMASS FUELS↗
NASA NTRS1988

Brighter material on Deimos - A particle size effect in a carbonaceous material?

The values obtained for brightness ratios between contiguous bright and dark areas on Deimos from Viking Orbiter images, together with the lack of a significant wavelength dependence of these ratios in the 0.4-0.6-micron range, are presently noted to be consistent with particle size fraction measurements of the Murchison CM meteorite. These data, and a near-coincidence of Deimos absolute reflectances with those of laboratory samples, render the present data consistent with both brighter and darker materials on Deimos being akin to carbonaceous chondrites; the material with smaller average particle size is associated with the brighter patches.

French, L. M.↗
NASA NTRS1993

Finite-size effects on long-range correlations: implications for analyzing DNA sequences

We analyze the fluctuations in the correlation exponents obtained for noncoding DNA sequences. We find prominent sample-to-sample variations as well as variations within a single sample in the scaling exponent. To determine if these fluctuations may result from finite system size, we generate correlated random sequences of comparable length and study the fluctuations in this control system. We find that the DNA exponent fluctuations are consistent with those obtained from the control sequences having long-range power-law correlations. Finally, we compare our exponents for the DNA sequences with the exponents obtained from power-spectrum analysis and correlation-function techniques, and demonstrate that the original "DNA-walk" method is intrinsically more accurate due to reduced noise.

NASA Discipline Cardiopulmonary↗
DOE OSTI2026

Porous reaction-bonded silicon nitride: Size effects for pressureless nitriding of binder jet additively manufactured silicon

The direct nitridation of binder jet additively manufactured silicon to produce porous reaction-bonded silicon nitride was explored to determine the maximum thickness of the sample that could be converted to >99% silicon nitride. The maximum thickness that could be nitrided was investigated by nitriding cubes of increasing physical size on the millimeter scale. Highly porous samples with high conversion ( > 99%) to silicon nitride were achieved in cubes with 35 mm edge length. It was shown that the silicon nitride phase content changes with increasing sample size.

Aguirre, Trevor [ORNL] (ORCID:0000000281469630)↗
DOE OSTI2023

Molecular Dynamics Simulation of Pore-Size Effects on Gas Adsorption Kinetics in Zeolites

Strong gas-mineral interactions or slow adsorption kinetics require a molecular-level understanding of both adsorption and diffusion for these interactions to be properly described in transport models. In this combined molecular simulation and experimental study, noble gas adsorption and mobility is investigated in two naturally abundant zeolites whose pores are similar in size (clinoptilolite) and greater than (mordenite) the gas diameters. Simulated adsorption isotherms obtained from grand canonical Monte Carlo simulations indicate that both zeolites can accommodate even the largest gas (Rn). However, gas mobility in clinoptilolite is significantly hindered at pore-limiting window sites, as seen from molecular dynamics simulations in both bulk and slab zeolite models. Further, experimental gas adsorption isotherms for clinoptilolite confirm the presence of a kinetic barrier to Xe uptake, resulting in the unusual property of reverse Kr/Xe selectivity. Finally, a kinetic model is used to fit the simulated gas loading profiles, allowing a comparison of trends in gas diffusivity in the zeolite pores.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Size effects in 3D–printed polymer–derived, zirconium diboride–reinforced ceramic composites

Preceramic polymers are of interest for use in many manufacturing techniques such as injection molding, ceramic fiber infiltration, and additive manufacturing. However, off-gassing of low molecular weight oligomers occurs when these polymers cure, potentially leading to porosity in the cured part. Here to study how porosity and strength are affected by the size of the printed part, and the presence of a high surface area nano-scale filler, polycarbosilane (PCS) microrods of varying diameter were fabricated via direct ink writing (DIW), an additive manufacturing technique, with two ink formulations containing either zirconium diboride (ZrB 2 ) alone, or ZrB 2 and fumed alumina (FA). Sets of microrods were printed in a range of sizes by using print nozzles of 450, 634, 979, 1 346, or 1 702 μm in diameter, which were thermally cured, pyrolyzed to form ceramic composite microrods, and tested in 3-pt flexure. Porosity increased with increasing diameter, while failure strength decreased. For a given nozzle size, the microrods containing FA displayed lower porosity and higher strength (up to ~500 MPa) compared to the microrods containing only ZrB 2 . Weibull strength analysis was performed on each group of microrods and shows that the addition of FA increased Weibull modulus from 4.63 ± 1.56 to 9.35 ± 0.601. In conjunction with optical microscopy, this analysis indicates two distinct flaw populations in the printed materials, porosity which arises during the curing step and cracking which arises during pyrolysis of the larger specimens.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Asteroid collisions: Target size effects and resultant velocity distributions

To study the dynamic fragmentation of rock to simulate asteroid collisions, we use a 2-D, continuum damage numerical hydrocode which models two-body impacts. This hydrocode monitors stress wave propagation and interaction within the target body, and includes a physical model for the formation and growth of cracks in rock. With this algorithm we have successfully reproduced fragment size distributions and mean ejecta speeds from laboratory impact experiments using basalt, and weak and strong mortar as target materials. Using the hydrocode, we have determined that the energy needed to fracture a body has a much stronger dependence on target size than predicted from most scaling theories. In addition, velocity distributions obtained indicate that mean ejecta speeds resulting from large-body collisions do not exceed escape velocities.

Ryan, Eileen V.↗
DOE OSTI2023

Particle size effect of graphite anodes on performance of fast charging Li-ion batteries

Charging energy-dense lithium-ion batteries (LIBs) with thick graphite electrodes at high current densities are typically accompanied by poor performance and safety issues. The root cause is the onset of Li plating at the surface of graphite when lithiated to a high capacity within a short time period. Here, we investigated the behavior of graphite electrodes with various particle sizes under fast charge operations. Results from the electrochemical characterization on graphite electrodes exhibit the superiority of smaller particles over bigger particles in terms of suppressing the onset of Li plating and growth of plated Li particles. Observations from scanning electron microscopy also corroborate the presence of plated Li in electrodes with big graphite particles and its absence in graphite electrodes with small particles, when the cells were lithiated to 90% of the state of charge (SOC). Further, the improved performance of cells with the small particles might be associated with the low Li-ion concentration at the surface of graphite and thus reduced overpotential in graphite electrodes. The simulated results revealed that, compared to bigger particles, smaller particles have lower surface intercalation at any given cell SOC, which may significantly reduce the overpotential in the graphite electrodes and mitigate the onset of Li plating. This agrees well with experimental observations.

25 ENERGY STORAGE↗
DOE OSTI2020

Pore size effect on selective gas transport in shale nanopores

In shale gas production, gas composition may vary over time. To understand this phenomenon, we use molecular dynamics simulations to study the permeation of CH 4 , C 2 H 6 and their mixture from a source container through a pyrophyllite nanopore driven by a pressure gradient. For a pure gas, the flow rate of CH 4 is always higher than that of C 2 H 6 , regardless of pore size. For a 1:1 C 2 H 6 : CH 4 mixture, however, C 2 H 6 :CH 4 flow rate ratio is higher than the compositional ratio in the container (i.e., 1:1) when the pore size is smaller than ~1.8 nm. The selective transport is caused by the competitive adsorption of C 2 H 6 over CH 4 in the nanopore. The selectivity is also determined by the interplay between the surface diffusion of the adsorbed molecules and the viscous flow in the center of the pore, and it diminishes as the viscous flow becomes to dominate the surface diffusion when the pore size becomes larger than 1.8 nm. Our work shows that compositional differentiation of shale gas in production is a consequence of nanopore confinement and therefore a key characteristic of an unconventional reservoir. Finally, the related compositional information can potentially be used for monitoring the status of a production well such as its recovery rate.

03 NATURAL GAS↗
DOE OSTI2022

Size effects and active state formation of cobalt oxide nanoparticles during the oxygen evolution reaction

Water electrolysis is a key technology to establish CO 2 -neutral hydrogen production. Nonetheless, the near-surface structure of electrocatalysts during the anodic oxygen evolution reaction (OER) is still largely unknown, which hampers knowledge-driven optimization. Here using operando X-ray absorption spectroscopy and density functional theory calculations, we provide quantitative near-surface structural insights into oxygen-evolving CoO x (OH) y nanoparticles by tracking their size-dependent catalytic activity down to 1 nm and their structural adaptation to OER conditions. We uncover a superior intrinsic OER activity of sub-5 nm nanoparticles and a size-dependent oxidation leading to a near-surface Co–O bond contraction during OER. We find that accumulation of oxidative charge within the surface Co 3+ O 6 units triggers an electron redistribution and an oxyl radical as predominant surface-terminating motif. This contrasts the long-standing view of high-valent metal ions driving the OER, and thus, our advanced operando spectroscopy study provides much needed fundamental understanding of the oxygen-evolving near-surface chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Depth and size effects on cosmogenic nuclide production in meteorites

The galactic cosmic particle radiation (GCR) can cause changes in condensed extraterrestrial matter in different ways. It can lose energy via ionization processes of induced nuclear reactions which lead to a wide variety of stable and radioactive cosmogenic nuclides. Heavy particles incur radiation damage in minerals such as olivine and pyroxene. Light particles predominantly tend to induce nuclear reactions, causing the development of a secondary particle cascade of neutrons, protons, pions and gamma-rays and the production of cosmogenic nuclides. Such processes are described by various models, which predict the depth and size dependent production of cosmogenic nuclides.

Englert, P.↗
DOE OSTI2020

Size effect on the growth and pulverization behavior of Si nanodomains in SiO anode

Silicon monoxide (SiO) as a promising silicon-based anode electrode of lithium-ion batteries (LIBs) has been the subject of many recent investigations. However, the complex microstructural features of SiO hinder attempts to link the microstructure changes in SiO with its electrochemical performances upon electrochemical cycling. This study employs X-ray pair distribution function (PDF), with a high-resolution transmission electron microscope (HRTEM), to investigate the microstructure of Si nanodomains in SiO and its structural evolution over the electrochemical cycling process. The experiment results reveal the size evolution of Si nanodomains in SiO during the electrochemical cycling and find it highly dependent on the initial Si domain size in SiO. If the initial Si domain size is too large, the average size of Si nanodomains would increase at first and then decrease after a certain number of cycles, which indicates the pulverization of Si domains after the electrochemical-driven growth of Si nanodomains reaches a critical point. Furthermore, these results suggest that an optimal initial Si nanodomain size of 4-6 nm for SiO anode materials is essential to retard the growth and subsequent pulverization process of Si nanodomains and thus to improve the cyclability of SiO during long-term cycling.

25 ENERGY STORAGE↗
DOE OSTI2024

A strain density function to analyze particle size effects during high velocity impacts of yttria

Here, the impact behavior of a single yttria (Y 2 O 3 ) nanoparticle onto a Y 2 O 3 substrate is studied as a function of particle velocity (300–1200 m/s) and diameter (12–50 nm) using molecular dynamics simulations. To analyze the results, a strain density function is developed to provide both quantitative and qualitative information about the deformation mechanisms that contribute to the final state of the system. This function provides both clear evidence of shear localization and insight into the conditions for which localization occurs during the impact of Y 2 O 3 particles as they approach experimentally relevant sizes. Further analysis shows that localization and fragmentation only occur for Y 2 O 3 impacts with diameters of at least 50 nm, while particles with diameters of 25 nm and smaller deform primarily by amorphization and viscous flow. Implications for the deposition of films of Y 2 O 3 and other rare-earth oxides via the micro cold spray process are discussed.

36 MATERIALS SCIENCE↗
NASA NTRS1998

A Specimen Size Effect on the Fatigue Crack Growth Rate Threshold of IN 718

Fatigue crack growth rate (FCGR) tests were conducted on IN 718 in the solution annealed and aged condition at room temperature in accordance with E647-87. As part of each test, the FCGR threshold was measured using the decreasing Delta K method. A new heat of material was being tested and some of this material was sent to a different laboratory which wanted to use a specimen with a 127 mm width. Threshold data previously had been established on specimens with a width of 50.8 mm. As a check of the laboratory, tests were conducted at room temperature and R equal to 0.1 for comparison with the earlier data. The results were a threshold significantly higher than previously observed. Interchanging of specimen sizes and laboratories showed that the results were not due to a heat-to-heat or lab-to-lab variation. The results to be presented here are those obtained at the original laboratory. Growth rates were measured using the electric potential drop technique at R values of 0.1, 0.7, and 0.9. Compact tension specimen sizes with planer dimensions of 25.4 mm, 50.8 mm, and 127 mm were used. Crack growth rates at threshold were generally below 2.5 X 10(exp -8) mm / cycle. Closure measurements were made on some of the specimens by a manual procedure using a clip gage. When the crack growth rate data for the specimens tested at R equal to 0.1 were plotted as a function of applied Delta K, the thresholds varied with specimen width. The larger the width, the higher the threshold. The thresholds varied from 6.5 MPa-m(exp 1/2) for the 25.4 mm specimen to 15.4 MPa-m(exp 1/2) for the 127 mm specimen. At R equal to 0.7, the 25.4 mm and 50.8 mm specimens had essentially the same threshold, about 2.9 MPa-m(exp 1/2)while the 127 mm specimen had a threshold of 4.5 MPa-m(exp 1/2). When plotted as a function of effective Delta K, the R equal to 0.1 data are essentially normalized. Various aspects of the test procedure will be discussed as well as the results of analysis of the data using some different closure models.

Garr, K. R.↗