Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Observation of the shock-induced β-Sn to b.c.t.-Sn transition using time-resolved X-ray diffraction

Time-resolved X-ray diffraction measurements have been carried out here on dynamically compressed Sn up to a maximum pressure of ~13 GPa at the European Synchrotron Radiation Facility. The phase transition from β-Sn to body-centered tetragonal (b.c.t.) Sn has been observed using synchrotron X-ray diffraction for the first time undergoing shock compression and release. Following maximum compression, the sample releases to lower pressures for several nanoseconds until the reverse transition occurs. The data are in good agreement with previous shock boundaries that indicate that the β-Sn phase is stable ~2 GPa higher than the static boundary upon compression and the b.c.t.-Sn phase is stable ~1 GPa lower upon release. The transition to the high-pressure phase reveals a loss of texture in the X-ray diffraction data from the `quasi' single-crystal β-Sn structure to a more powder-like Debye–Scherrer ring.

36 MATERIALS SCIENCE↗

Magneto-transport study on Sn-rich Sn 1–x Ge x thin films enabled by CdTe buffer layer

α-Sn, generally known as gray tin, has attracted significant scientific interest due to its potential to host novel topological phases. Studying the transport properties of α-Sn thin films grown on the InSb substrate has been challenging, as the InSb substrate also significantly contributes to the transport properties. In this article, we report a novel approach to epitaxially grow α-Sn thin films on an InSb substrate with a resistive buffer layer of CdTe. Thin films of α–Sn 1–x Ge x (x = 0, 0.025) alloy of 15 nm thickness have been grown using molecular beam epitaxy. The high quality of the samples has been determined through high-resolution x-ray diffraction. The CdTe buffer layer has high resistance and acts as an insulating virtual substrate, which significantly suppresses contribution from InSb. Magnetotransport measurements show clear Shubnikov–de Hass oscillations in α–Sn 1–x Ge x (x = 0, 0.025) thin films. A change in oscillation frequency is observed upon alloying with Ge, implying a modification in the electronic structure and demonstrating the effectiveness of the CdTe buffer layer approach. Furthermore, this work provides a new approach that enables the electronic transport characterization of the α–Sn 1–x Ge x alloy system, which enables the study of the topological quantum states using electronic transport and their device applications.

36 MATERIALS SCIENCE↗

The infrared echo of a type II supernova with a circumstellar dust shell - Applications to SN 1979c and SN 1980k

Merrill (1980) and Telesco et al. (1981) have reported observations according to which supernovae developed a thermal infrared excess about 7-9 months after visual maximum. The two supernovae involved are SN 1979c in NGC 4321 and SN 1980k in NGC 6946. The infrared behavior of these supernovae is almost identical to that observed in several novae. The present investigation is concerned with the question whether the thermal infrared radiation from SN 1979c and SN 1980k could have been emitted by dust particles which were present in a circumstellar shell prior to the supernova event. The obtained results confirm the suggestion of Bode and Evans (1980) that the thermal emission from SN 1979c may have originated from preexisting dust present in a circumstellar shell and heated up by the UV-visual output of the supernova. The thermal infrared emission from SN 1980k may have a similar origin.

Dwek, E.↗

Pillared Sn‐MWW Prepared by a Solid‐State‐Exchange Method and its Use as a Lewis Acid Catalyst

Abstract Pillared Sn‐MWW (Sn‐MWW(SP)‐SSE) was prepared through a solid‐state‐exchange (SSE) route. The pillared structure was inherited from pillared B‐MWW, and Sn was inserted in the framework by boron leaching and solid‐state‐exchange with tin tetrachloride pentahydrate. The Sn‐MWW(SP)‐SSE with framework Sn sites exhibits Lewis acidity and good catalytic performance for the Baeyer–Villiger oxidation, and mono‐ and disaccharide isomerizations.

Ren, Limin↗

Influence of Sn{sup 4+} and Sn{sup 4+}/Mg{sup 2+} doping on structural features and visible absorption properties of {alpha}-Fe{sub 2}O{sub 3} hematite

Pure, Sn-doped and Mg/Sn co-doped {alpha}-Fe{sub 2}O{sub 3} hematite samples were synthesized by precipitation process. Fe{sub 2}O{sub 3} is the most popular red mineral pigment which is used largely in traditional ceramics, tar and concrete. The compounds were characterized by powder X-ray diffraction (XRD), scanning transmission electronic microscopy (energy dispersive X-ray cartography), Moessbauer spectroscopy, magnetic investigations versus temperature and visible-NIR spectroscopy. Both {sup 57}Fe and {sup 119}Sn Moessbauer analyses combined with rietveld XRD refinements are the ideal techniques to characterize tin-iron oxides. Hence, thanks to these techniques it was shown how the synthesis temperature influences directly the grain size and the dopants concentration limit which can be incorporated into the host hematite matrix. The stabilization of these tetravalent and divalent dopants into the hematite framework leads to reduce the crystal growth and to limit the (AF) ordering due to the formation of cationic vacancies. The study of the Morin magnetic transition emphasizes this demonstration. In a second part, the influence of the dopants incorporation on the material color was investigated in order to show which key parameters allow improving the red color saturation of iron oxides. In order to improve the red color of the hematites, it was shown that the introduction of cationic vacancies-limiting the octahedral distortion thanks to the interruption of the dissymmetric metal-metal orbital coupling-is the key point. Vacancies are created by Sn{sup 4+}, doping for an increase of the introduced Sn{sup 4+} concentration; it acts to the detriment of the color saturation. - Graphical Abstract: Sn-doped or Sn/Mg-doped Fe{sub 2}O{sub 3} hematites, were analyzed by X-ray diffraction refinement, Moessbauer spectroscopy, magnetic characterization and TEM investigations. Their color is correlated to the doping ions concentration.

36 MATERIALS SCIENCE↗

A photoactive titanate with a stereochemically active Sn lone pair: Electronic and crystal structure of Sn{sub 2}TiO{sub 4} from computational chemistry

TiO{sub 2} remains the most widely studied metal oxide for photocatalytic reactions. The standard approach to reduce the band gap of titania, for increasing the absorption of visible light, is anion modification. For example the formation of an oxynitride compound, where the nitrogen 2p states decrease the binding energy of the valence band. We demonstrate that cation modification can produce a similar effect through the formation of a ternary oxide combining Ti and an ns{sup 2} cation, Sn(II). In Sn{sub 2}TiO{sub 4}, the underlying Ti 3d conduction states remain largely unmodified and an electronic band gap of 2.1 eV (590 nm) is predicted by hybrid density functional theory. Our analysis indicates a strong potential for Sn{sub 2}TiO{sub 4} in visible-light driven photocatalysis, which should prove superior to the alternative (SnO{sub 2}){sub 1-x}(TiO{sub 2}){sub x} solid-solution. - Graphical abstract: Sn{sub 2}TiO{sub 4} is predicted to be a semiconductor with potential for bipolar conductivity and visible-light photocatalysis. Highlights: Black-Right-Pointing-Pointer Tin titanate adopts the Pb{sub 3}O{sub 4} crystal structure with a sterically active Sn(II) lone pair. Black-Right-Pointing-Pointer Tin titanate is thermodynamically stable with respect to TiO{sub 2} and SnO. Black-Right-Pointing-Pointer Tin titanate is predicted have a band gap of 590 nm, ideal for photocatalytic applications.

36 MATERIALS SCIENCE↗

Thermoelectric properties of p-type Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2}

The thermoelectric properties of Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2} (4≤m≤16, −0.1≤x≤0.3, 1/3≤y≤2/3, 0.2≤z≤0.4; Lead Antimony Silver Tellurium Tin, LASTT-m) compositions were investigated in the temperature range of 300 to ~670 K. All samples crystallize in the average NaCl-type structure without any noticeable second phase and exhibit very narrow bandgaps of <0.1 eV. We studied a range of m values, silver concentrations (x), Pb/Sn ratios (y), and antimony concentrations (z) to determine their effects on the thermoelectric properties. The samples were investigated as melt grown polycrystalline ingots. Varying the Ag contents, the Pb/Sn ratios, and the Sb contents off-stoichiometry allowed us to control the electrical conductivity, the Seebeck coefficient, and the thermal conductivity. The electrical conductivity tends to decrease with decreasing m values. The highest ZT of ~1.1 was achieved at ~660 K for Ag{sub 0.9}Pb{sub 5}Sn{sub 5}Sb{sub 0.8}Te{sub 12} mainly due to the very low lattice thermal conductivity of ~0.4 W/(m K) around 660 K. Also, samples with charge-balanced stoichiometries, Ag(Pb{sub 1−y}Sn{sub y}){sub m}SbTe{sub m+2}, were studied and found to exhibit a lower power factor and higher lattice thermal conductivity than the Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2} compositions. - Graphical abstract: The Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2} system defines a complex and flexible class of tunable thermoelectric class of materials with high performance.

36 MATERIALS SCIENCE↗

A phase width for CaGaSn. Crystal structure of mixed intermetallic Ca{sub 4}Ga{sub 4+x}Sn{sub 4−x} and SmGa{sub x}Sn{sub 3−x}, stability, geometry and electronic structure

X-ray single-crystal structure has been established for new compositions in intermetallic systems of tin and gallium. Crystals were successfully obtained in alloys prepared from elements. The structure of SmGaSn{sub 2} (cubic Pm3̄m, a=4.5778(8) Å, Z=1, R1=0.012) is described with atomic disorder at all Sn/Ga positions and the structure of Ca{sub 4}Ga{sub 4.9}Sn{sub 3.1} (hexagonal, P6{sub 3}/mmc, a=4.2233(9), c=17.601(7) Å, Z=1, R1=0.062) raises an interesting question about existence of a composition domain for CaGaSn. Finally, Ca{sub 4}Ga{sub 4.9}Sn{sub 3.1} should be considered as a particular composition of Ca{sub 4}Ga{sub 4+x}Sn{sub 4−x}, a compound assumed to exist in the range x ~ 0−1. Partial atomic ordering characterizes the Sn/Ga puckered layers of hexagons whose geometries are analyzed and discussed comparatively with analogous arrangements in AlB{sub 2} related hexagonal compounds. The study is supported by rigid band model and DFT calculations performed for different experimental and hypothetic arrangements. - Graphical abstract: A phase width for Ca{sub 4}Ga{sub 4+x}Sn{sub 4−x} belonging to the hexagonal YPtAs structure-type. - Highlights: • Single crystals of mixed tin gallium ternary intermetallics were obtained. • Partial ordering at metal sites and phase width are evidenced for Ca{sub 4}Ga{sub 4+x}Sn{sub 4−x}. • Layer deviation to flatness is studied comparatively with related structures. • Geometry and stability analyses based on DFT calculations are provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Specific heat of Nb{sub 3}Sn: The case for a single gap

The important influence of multiple gaps in the superconductivity of MgB{sub 2} and Fe-based compounds, especially because of the possibility that manipulation of a second gap can significantly raise the upper critical field H{sub c2}, has refocused attention on Nb{sub 3}Sn because anomalies in both specific heat and point-contact tunneling studies have led to the proposal that Nb{sub 3}Sn is also a two-gap superconductor. Here, we search for evidence of the second gap in a careful study of the influence of the homogenization temperature on the sample uniformity. We show that it is very difficult to fabricate samples that are both homogeneous and stoichiometric. We find so-called “second-gap” anomalies disappear only after high temperature and long-term annealing. Such a well-annealed sample shows only a strong, electron-phonon-coupled, single-gap behavior. In contrast, samples reacted and annealed at lower temperatures, as in the earlier two-gap studies, show small chemical composition variations of the A15 phase. We propose that the second gap sightings are actually due to variation of T{sub c} within very difficult-to-fully homogenize samples. A curiosity of the A15 Nb{sub 3}Sn phase is that almost any mixture of Nb and Sn tries to form a stoichiometric A15 composition, but the residue of course contains off-stoichiometric A15, Nb, and other phases when the Nb:Sn ratio departs from the true 3:1 stoichiometry.

36 MATERIALS SCIENCE↗

Electronic structure and thermoelectric properties of p-type Ag-doped Mg₂Sn and Mg₂Sn{sub 1-x}Si{sub x} (x=0.05, 0.1)

An experimental and theoretical study of p-type Ag-doped Mg₂Sn and Mg₂Sn{sub 1-x}Si{sub x} (x=0.05, 0.1) is presented. Band structure calculations show that behavior of Ag in Mg₂Sn depends on the site it occupies. Based on Bloch spectral functions and density of states calculations, we show that if Ag substitutes for Sn, it is likely to form a resonant level; if it substitutes for Mg, a rigid-band-like behavior is observed. In both cases, the doped system should exhibit p-type conductivity. Experimentally, thermoelectric, thermomagnetic, and galvanomagnetic properties are investigated of p-type Mg₂Sn{sub 1–x}Si{sub x} (x=0, 0.05, 0.1) samples synthesized by a co-melting method in sealed crucibles. Ag effectively dopes the samples p-type, and thermoelectric power factors in excess of 20μW cm⁻¹K⁻² are observed in optimally doped samples. From the measured Seebeck coefficient, Nernst coefficient, and mobility, we find that the combination of acoustic phonon scattering, optical phonon scattering and defect scattering results in an energy-independent scattering rate. No resonant-like increase in thermopower is observed, which correlates well with electronic structure calculations assuming the location of Ag on Mg site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic layer epitaxy of kagome magnet Fe 3 Sn 2 and Sn-modulated heterostructures

Magnetic materials with kagome crystal structure exhibit rich physics, such as frustrated magnetism, skyrmion formation, topological flat bands, and Dirac/Weyl points. Until recently, most studies on kagome magnets have been performed on bulk crystals or polycrystalline films. Here, we report the atomic layer molecular beam epitaxy synthesis of high-quality thin films of topological kagome magnet Fe 3 Sn 2 . The structural and magnetic characterization of Fe 3 Sn 2 on epitaxial Pt(111) identifies highly ordered films with c-plane orientation and an in-plane magnetic easy axis. Studies on the local magnetic structure by anomalous Nernst effect imaging reveal in-plane oriented micrometer size domains. Superlattice structures consisting of Fe 3 Sn 2 and Fe 3 Sn are also synthesized by atomic layer molecular beam epitaxy, demonstrating the ability to modulate the sample structure at the atomic level. The realization of high-quality films by atomic layer molecular beam epitaxy opens the door to explore the rich physics of this system and investigate novel spintronic phenomena by interfacing Fe 3 Sn 2 with other materials.

36 MATERIALS SCIENCE↗

Spectra of two very old supernovae - SN 1986J and SN 1980K

Spectra are presented for SN 1986J in NGC 891, observed 4 and 7 years after the explosion, and SN 1980K, observed 9 years after maximum light. A narrow-line and a broad-line component are noted in SN 1986J; these are respectively attributed to a circumstellar shell and the actual stellar interior (without hydrogen). SN 1980K continues to emit in very broad lines. Comparison with earlier observations suggests that this SN halted its exponential flux decline in the early 1980s, and is currently emitting at a constant rate. In both SNs studies, the identity of the energy source which sustains emission remains uncertain.

Leibundgut, Bruno↗

Direct analysis of the broad-line SN 2019ein: connection with the core-normal SN 2011fe

Type Ia supernovae (SNe Ia) are important cosmological probes and contributors to galactic nucleosynthesis, particularly of the iron group elements. To improve both their reliability as cosmological probes and to understand galactic chemical evolution, it is vital to understand the binary progenitor system and explosion mechanism. The classification of SNe Ia into Branch groups has led to some understanding of the similarities and differences among the varieties of observed SNe Ia. Branch groups are defined by the pseudo-equivalent widths of the two prominent Si ii lines, leading to four distinct groups: core-normal (CN), shallow-silicon, cool, and broad-line (BL). However, partly due to small sample size, little work has been done on the BL group. We perform direct spectral analysis on the pre-maximum spectra of the BL SN 2019ein, comparing and contrasting to the CN SN 2011fe. Both SN 2019ein and SN 2011fe were first observed spectroscopically within 2 d of discovery, allowing us to follow the spectroscopic evolution of both SNe in detail. We find that the optical depths of the primary features of both the CN and BL SNe are very similar, except that there is a Doppler shift between them. We further examine the BL group and show that for nine objects with pre-maximum spectra in the range (–6)–(–2) d with respect to B-maximum all the emission peaks of the Si ii λ6355 line of BL are blueshifted pre-maximum, suggesting a possible classification criterion.

79 ASTRONOMY AND ASTROPHYSICS↗

Rapidity distributions of Z = 1 isotopes and the nuclear symmetry energy from Sn+Sn collisions with radioactive beams at 270 MeV/nucleon

The rapidity distributions of hydrogen isotopes emitted from central collisions of neutron-rich 132 Sn+ 124 Sn and neutron-deficient 108 Sn+ 112 Sn systems at 270 MeV/nucleon were investigated at RIKEN-RIBF. The data are compared with antisymmetrized molecular dynamics (AMD) calculations and the rapidity distributions can be reproduced after adjusting the in-medium nucleon-nucleon cross sections. The double ratios between the two reaction systems taken for the relative yields of deuteron to proton (d/p) and triton to proton (t/p) are further examined in the midrapidity domain, where the adjustments in the AMD calculations do not affect much on them. The d/p and t/p double ratios at midrapidity agree well with the ratio of the system neutron numbers and its squared value, respectively, and the rapidity dependence of these double ratios is consistent with a picture of partial mixing of colliding nuclei. By comparing with the AMD model which shows a strong symmetry energy dependence of the t/p double ratio, the experimental result in the midrapidity domain favors the calculation with a symmetry-energy slope parameter around L = 46 MeV rather than L = 108 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Surface studies of crystalline and amorphous Zn-In-Sn-O transparent conducting oxides

X-ray and ultraviolet photoelectron spectroscopy (UPS) studies were made of in situ RF magnetron-sputtered crystalline (c) and amorphous (a) Zn–In–Sn–O (ZITO) thin films, ex situ pulsed laser deposited c- and a-ZITO thin films, and bulk ZITO ceramics. Cosubstitution of Zn and Sn for In results in an increase of the In core level binding energy at a given Fermi level compared to that measured in undoped and Sn-doped In 2 O 3 (ITO). In plots of work function vs. Fermi level, in situ c-ZITO and a-ZITO films have low ionization potentials (7.0–7.7 eV) that are similar to undoped In 2 O 3 . In contrast, dry-air-annealed in situ films, ex situ films, and bulk ceramics have higher ionization potentials (7.7–8.1 eV) that are more similar to ITO and match well with previous work on air-exposed surfaces. Kelvin Probe measurements were made of select a-ZITO films exposed to air and ultraviolet/ozone-treated so as to measure work functions under conditions commonly employed for device fabrication. Results (4.8–5.3 eV) were in good agreement with the UPS work functions of oxygen-exposed materials and with literature values. Lastly, a parallelogram plot of work function vs. Fermi level shows that a wider range of work functions is achievable in ZITO materials as compared to other transparent conducting oxides (Sb-doped SnO 2 , Al-doped ZnO, Sn-doped In 2 O 3 ), making ZITO more versatile for applications.

Proffit, Diana E↗

Ca Metal Batteries and Sn Anode Alloying: Resolving Misconceptions in Ca–Sn Alloy Formation

Ca metal anode suffers from surface passivation and struggles to effectively plate and strip in conventional Ca electrolytes, making the development of alloy anode for calcium metal battery essential. This work systematically and carefully evaluates the electrochemical formation and feasibility of the Sn anode and its possibility of alloying with Ca using a combination of cyclic voltammetry, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction (XRD), and synchrotron transmission X-ray microscopy (TXM). Electrochemical measurements and SEM/EDS analyses indicate apparent Ca alloy formation. However, detailed XRD and TXM characterization reveal substantial lithium-ion involvement when lithium metal is employed as the reference electrode, even in electrolytes with high Ca salt concentrations. These findings highlight a significant risk of misinterpretation: Although limited Ca–Sn alloying may occur, the faster kinetics of Li + can dominate the alloying process, leading to a Li-driven reactions at the Sn anode. In contrast, cells constructed with Ca metal as both reference and counter electrodes exhibit distinct redox features only during the initial cycles, followed by rapid cell failure. The high oxidation currents induce severe Ca passivation, occurring nearly concurrently with Sn dealloying. Overall, this study provides critical insight into the practical limitations and common experimental artifacts associated with Ca metal battery systems and underscores the necessity for rigorous cell design and cautious interpretation when evaluating alloy chemistry in multivalent Ca-based batteries.

36 MATERIALS SCIENCE↗