Search NASA⌕ Search

SEARCH · Search NASA

Results for “Snowflakes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High temporal resolution estimates of Arctic snowfall rates emphasizing gauge and radar-based retrievals from the MOSAiC expedition

This article presents the results of snowfall rate and accumulation estimates from a vertically pointing 35-GHz radar and other sensors deployed during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition. The radar-based retrievals are the most consistent in terms of data availability and are largely immune to blowing snow. The total liquid-equivalent accumulation during the snow accumulation season is around 110 mm, with more abundant precipitation during spring months. About half of the total accumulation came from weak snowfall with rates less than approximately 0.2 mmh–1. The total snowfall estimates from a Vaisala optical sensor aboard the icebreaker are similar to those from radar retrievals, though their daily and monthly accumulations and instantaneous rates varied significantly. Compared to radar retrievals and the icebreaker optical sensor data, measurements from an identical optical sensor at an ice camp are biased high. Blowing snow effects, in part, explain differences. Weighing gauge measurements significantly overestimate snowfall during February–April 2020 as compared to other sensors and are not well suited for estimating instantaneous snowfall rates. The icebreaker optical disdrometer estimates of snowfall rates are, on average, relatively little biased compared to radar retrievals when raw particle counts are available and appropriate snowflake mass-size relations are used. These counts, however, are not available during periods that produced more than a third of the total snowfall. While there are uncertainties in the radar-based retrievals due to the choice of reflectivity-snowfall rate relations, the major error contributor is the uncertainty in the radar absolute calibration. The MOSAiC radar calibration is evaluated using comparisons with other radars and liquid water cloud–drizzle processes observed during summer. Overall, this study describes a consistent, radar-based snowfall rate product for MOSAiC that provides significant insight into Central Arctic snowfall and can be used for many other purposes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Pathways for Nucleation and Growth in Confined Spaces and at Interfaces

Mineral crystallization is central to myriad natural processes from the formation of snowflakes to stalagmites, but the molecular-scale mechanisms are often far more complex than models reflect. Feedbacks between the hydro-, bio-, and geo-spheres drive complex crystallization processes that challenge our ability to observe and quantify them, motivating an expansion of crystallization theories. Here, in this article, we discuss how the driving forces and timescales of nucleation are influenced by factors ranging from simple geometric confinement to distinct interfacial solution structures involving solvent organization, electrical double layers, and surface charging effects. Taken together, these ubiquitous natural phenomena can preserve metastable intermediates, drive precipitation of undersaturated phases, and modulate crystallization in time and space.

biosphere↗
DOE OSTI2017

Mapping of orthogonal 2D flux coordinates for two nearby magnetic X-points to logically rectangular domains

The behavior of plasmas in configurations with magnetic null points is of potential interest for a number of systems. Such nulls, sometimes referred to as X-points, a name strictly valid only for wellseparated nulls where magnetic separatrices cross at a right angle, may occur in only one component of the magnetic field, such as the poloidal field in a tokamak. Numerical simulations are often used to study and predict turbulence and transport in such systems. For cases with strong magnetic field such that the ion and electron gyro-frequencies are much larger that particle collision frequencies, there is a strong anisotropy in the plasma transport along the magnetic field compared to across the field. Because of the strong anisotropy, it is often advantageous for simulations to use a coordinate system based on magnetic flux surfaces together with a coordinate orthogonal to the flux surfaces. This report presents the topological considerations needed to construct the mapping on an orthogonal flux-surface mesh onto a logically rectangular domain often used in simulation codes of the divertor region of tokamaks having two nearby X-points, thus extending the mapping now common single-null or well-separated double nullpoint cases with one null located at the top and bottom of the device. This extension is especially relevant to study the capability of snowflake divertors in tokamaks for reducing the peak heat flux of exhaust plasma on the target plates [1-3]. The analysis presented here follows the analytic description of the poloidal magnetic field, B pol , near two closely-spaced X-points given by Ryutov [1-3]. This analysis is applicable to experimental devices where the two X-points are generated by distributed poloidal field coils and the plasma core current. This analytic description is used to identify topological features of an orthogonal mesh. A key parameter that specifies the various topology changes is the poloidal angle between the primary X-point and the second X-point, and the changes are associated with a set of critical angles. Understanding these changes leads to the final step in the mesh construction by identifying the locations of various regions or patches in configuration space and in a corresponding logically rectangular index space. UEDGE [4] and other 2-D fluid plasma simulation codes [5-7] describe the edge plasma of toroidally symmetric tokamak configurations with one or more X-points in a divertor region. The 2-D spatial mesh is usually based on a magnetic configuration produced by an MHD equilibrium code such as EFIT and written out as one or more “eqdsk” files. As illustrated in Fig. 1, the domain of the simulated plasma consists of several flux tubes bounded by poloidal magnetic flux surfaces. The number and spacing of the flux surfaces defines the “radial” resolution of the mesh. The “radial” direction is locally orthogonal to flux surfaces; the “poloidal” direction is locally parallel to flux surfaces. The “poloidal” resolution of the mesh is defined by the number of cells in the poloidal direction between adjacent flux surfaces. For boundary plasma transport codes used for tokamak configurations such as UEDGE it is convenient, though not necessary, to assume that all flux tubes have the same number of poloidal cells so the mesh is logically rectangular in index space, but does possess internal boundaries linking different sub-rectangles in the computational domain. The following sections of this report describe indexing schemes that map tokamak magnetic configurations with one or more x-points in the divertor region(s) onto a rectangular index space. Simulation results from the UEDGE code illustrate the schemes for a few configurations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Parameterization of arctic hydrometeor physics using new precipitation measurement technologies: Final Report

Predictions of precipitation are highly sensitive to the accuracy of parameterized growth and sedimentation processes, especially in remote regions such as the Arctic where observations are scarce. The goal of this study was to combine measurements of meteorological conditions and retrievals from passive and active remote sensors to provide refined parameterizations of precipitation properties and processes with a particular focus on the Arctic. To accomplish the project goals, new instrumentation was used from the Oliktok Point Mobile Facility and the Utqiagvik (Barrow) North Slope of Alaska ARM site focusing in particular on Multi-Angle Snowflake Camera (MASC) data. The MASC is the first device able to automatically photograph precipitation particles in free-fall from multiple angles while simultaneously measuring their fall speed. The MASC installed at the ARM Oliktok Point and Utqiagvik facilities was used to examine the nature of Arctic precipitation, taking particular advantage of the unique suite of precipitation, meteorological, and remote sensing instrumentation that is available at the high latitude sites. Combined with radiometer data we were able to explore the relationship between precipitation particle characteristics and the clouds where the snow is created. Ground-based wind measurements provided detailed data on turbulence. Further theoretical work explored the physical mechanisms controlling precipitation size distributions, the physics determining hydrometeor fallspeed, and the existence of general solutions to the Navier-Stokes equations for falling particles. Outreach work introduced hydrometeor classification to classrooms across the United States.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Assessing Several Modeling Approaches in Depletion Studies of a TRISO-Fueled Microreactor

The impact of MCNP6 depletion resolution on core lifetime is examined in the context of the Snowflake microreactor with explicit TRISO fuel. The change in core lifetime and isotope mass as a result of different tracked isotopes, timesteps, and spatial regions is discussed. Calculation speed of a prototype MCNP delta tracking module is compared to a reactivity equivalent physical transformation (RPT). Using a single depletion material underpredicts core lifetime by 15%, and the resolution necessary to converge isotope mass greatly depends on the specific isotope, in addition to the size (and location) of the depletion region. The prototype delta tracking module decreases the CPU time of explicit TRISO criticality calculations by 30%, but does not always result in a speedup when used with depletion. Significant depletion speedup is obtained using RPT (50% faster), and all isotope masses agreed within three percent.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Targeted Observations of Blowing Snow during SAIL (SAIL-TOBS) Field Campaign Report

Blowing snow research at high-latitude U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility observatories and mobile campaigns demonstrated the need for ground truth during falling and blowing snow events. The purpose of the Targeted Observations of Blowing Snow during SAIL (SAIL-TOBS) field campaign was to affordably deploy additional instruments to observe mixed-phase and frozen hydrometeors, including falling and blowing snow, during the second winter of the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign. Instruments included two installations of the Open Snowflake Camera for Research and Education (OSCRE), one at the Gothic, Colorado main site (second ARM Mobile Facility [AMF2]) and a second at the Kettle Ponds external field site in support of the Study of Precipitation, the Lower Atmosphere and Surface for Hydrometeorology (SPLASH) campaign. Two FlowCapt FC4 acoustic mass flux sensors were also deployed at AMF2 in proximity to OSCRE on top of the instrumented hill (Figure 1).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Estimating total attenuation using Rayleigh targets at cloud top: applications in multilayer and mixed-phase clouds observed by ground-based multifrequency radars

At millimeter wavelengths, attenuation by hydrometeors, such as liquid droplets or large snowflakes, is generally not negligible. When using multifrequency ground-based radar measurements, it is common practice to use the Rayleigh targets at cloud top as a reference in order to derive attenuation-corrected reflectivities and meaningful dual-frequency ratios (DFRs). By capitalizing on this idea, this study describes a new quality-controlled approach that aims at identifying regions of cloud where particle growth is negligible. The core of the method is the identification of a “Rayleigh plateau”, i.e., a large enough region near cloud top where the vertical gradient of DFR remains small. By analyzing co-located Ka–W band radar and microwave radiometer (MWR) observations taken at two European sites under various meteorological conditions, it is shown how the resulting estimates of differential path-integrated attenuation (ΔPIA) can be used to characterize hydrometeor properties. When the ΔPIA is predominantly produced by cloud liquid droplets, this technique alone can provide accurate estimates of the liquid water path. When combined with MWR observations, this methodology paves the way towards profiling the cloud liquid water, quality-flagging the MWR retrieval for rain and drizzle contamination, and/or estimating the snow differential attenuation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Triple-frequency radar retrieval of microphysical properties of snow

Abstract. An algorithm based on triple-frequency (X, Ka, W) radar measurements that retrieves the size, water content and degree of riming of ice clouds is presented. This study exploits the potential of multi-frequency radar measurements to provide information on bulk snow density that should underpin better estimates of the snow characteristic size and content within the radar volume. The algorithm is based on Bayes' rule with riming parameterised by the “fill-in” model. The radar reflectivities are simulated with a range of scattering models corresponding to realistic snowflake shapes. The algorithm is tested on multi-frequency radar data collected during the ESA-funded Radar Snow Experiment For Future Precipitation Mission. During this campaign, in situ microphysical probes were mounted on the same aeroplane as the radars. This nearly perfectly co-located dataset of the remote and in situ measurements gives an opportunity to derive a combined multi-instrument estimate of snow microphysical properties that is used for a rigorous validation of the radar retrieval. Results suggest that the triple-frequency retrieval performs well in estimating ice water content (IWC) and mean mass-weighted diameters obtaining root-mean-square errors of 0.13 and 0.15, respectively, for log 10IWC and log 10Dm. The retrieval of the degree of riming is more challenging, and only the algorithm that uses Doppler information obtains results that are highly correlated with the in situ data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Overview of the TCV tokamak program: Scientific progress and facility upgrades

The TCV tokamak is augmenting its unique historical capabilities (strong shaping, strong electron heating) with ion heating, additional electron heating compatible with high densities, and variable divertor geometry, in a multifaceted upgrade program designed to broaden its operational range without sacrificing its fundamental flexibility. The TCV program is rooted in a three-pronged approach aimed at ITER support, explorations towards DEMO, and fundamental research. A 1 MW, tangential neutral beam injector (NBI) was recently installed and promptly extended the TCV parameter range, with record ion temperatures and toroidal rotation velocities and measurable neutral-beam current drive. ITER-relevant scenario development has received particular attention, with strategies aimed at maximizing performance through optimized discharge trajectories to avoid MHD instabilities, such as peeling-ballooning and neoclassical tearing modes. Experiments on exhaust physics have focused particularly on detachment, a necessary step to a DEMO reactor, in a comprehensive set of conventional and advanced divertor concepts. The specific theoretical prediction of an enhanced radiation region between the two X-points in the low-field-side snowflake-minus configuration was experimentally confirmed. Fundamental investigations of the power decay length in the scrape-off layer (SOL) are progressing rapidly, again in widely varying configurations and in both D and He plasmas; in particular, the double decay length in L-mode limited plasmas was found to be replaced by a single length at high SOL resistivity. Experiments on disruption mitigation by massive gas injection and electron-cyclotron resonance heating (ECRH) have begun in earnest, in parallel with studies of runaway electron generation and control, in both stable and disruptive conditions; a quiescent runaway beam carrying the entire electrical current appears to develop in some cases. Developments in plasma control have benefited from progress in individual controller design and have evolved steadily towards controller integration, mostly within an environment supervised by a tokamak profile control simulator. TCV has demonstrated effective wall conditioning with ECRH in He in support of the preparations for JT-60SA operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1979

A numerical model of the Martian polar cap winds

An investigation of the Martian polar cap winds and their response to a variety of factors is carried out by numerical experiments based on a zonally symmetric primitive equation model. The seasonal thermal forcing, mass exchange between polar caps and atmosphere, large-scale topography, and polar cap size are discussed, noting that topography has a small effect, but the circulation intensity increases with cap size. The model results show that surface winds near the edge of a retreating polar cap are enhanced, and that the surficial wind indicators near the south pole are formed during spring and those near the north pole during winter. It is suggested that the high-latitude dune fields in the northern hemisphere are formed when the terrain is covered by frost, and that the saltating particles are 'snowflakes' which formed by the mechanism proposed by Pollack (1976). The model results for the winter simulation compare favorably with general circulation model (GCM) calculations.

Haberle, R. M.↗
NASA NTRS1983

Anomalous bulk viscosity of two-phase fluids and implications for planetary interiors

The irreversible entropy production is calculated for the imposition of a pressure perturbation on a two-phase medium composed of a dilute suspension of droplets (or snowflakes) and a liquid phase of other materials. An absence of metastability is assumed, allowing the relaxation to be dominated by the solute finite diffusivity. The fluid medium was found to display a behavior suggestive of a bulk viscosity near 10 trillion P, a finding that is significant for studies of dissipation in planetary cores for tidal or seismic disturbances. A minimum quality factor for acoustic or tidal pressure oscillations and the accompanying frequency are calculated. An example is provided in terms of helium rain clouds in the deep interiors of giant planets. Additionally, a tidal quality factor of 10 to the 15th is found necessary to account for Io volcanism and resurfacing on Enceladus.

Stevenson, D. J.↗
NASA NTRS1984

'Fluffy' Type A Ca-, Al-rich inclusions in the Allende meteorite

Inclusions called 'fluffy' Type A's or FTA's in the Allende meteorite are examined as possible candidates for relict vapor-solid condensate grains, remaining from the original solar nebula. Type A inclusions are characterized by abundant melilite and absence of primary anorthite and titaniferous pyroxene. Fluffy Type A's were probably loosely bound clumps of crystals drifting in the solar nebula, analogous to dustballs or snowflakes. Polished thin sections of all samples were studied optically and with a JEOL JSM-35 scanning electron microscope. It is reasonably clear that neither whole FTA's nor constituent nodules of the coarser grained ones were ever molten. Despite solid-state recrystallization which has affected these inclusions to varying degrees, the coarser grained material remaining in many of them is probably a relic of vapor-solid condensation in the solar nebula.

Macpherson, G. J.↗
NASA NTRS1989

Dendrites, viscous fingers, and the theory of pattern formation

Recent developments in the theory of pattern formation in dendritic crystal growth and viscous fingering in fluids are reviewed. Consideration is given to the discovery that weak capillary forces act as singular perturbations which lead to selection mechanisms in dendritic crystal growth and fingering patterns. Other topics include the conventional thermodynamic model of the solidification of a pure substance from its melt, fingering instability, pattern selection, the solvability theory, dendritic growth rates, the bubble effect discovered by Couder et al. (1986), the dynamics of pattern-forming systems, and snowflake formation.

Langer, J. S.↗
NASA NTRS1989

Artificial gravity Mars spaceship

Experience gained in the study of artificial gravity for a manned trip to Mars is reviewed, and a snowflake-configured interplanetary vehicle cluster of habitat modules, descent vehicles, and propulsion systems is presented. An evolutionary design is described which permits sequential upgrading from five to nine crew members, an increase of landers from one to as many a three per mission, and an orderly, phased incorporation of advanced technologies as they become available.

Clark, Benton C.↗
NASA NTRS1993

Your GAS experiment and the media or why does that other can get all of the publicity?

NASA has flown almost 100 Get Away Special (GAS) cans. Only a few of them are remembered by the general public, including the 'snowflakes in space' from STS-6, 'ants in space' from STS-7, and CanDO from STS-57. Why do some GAS cans get all of the publicity, while others are barely mentioned in press conferences, press kits, and on NASA Select during the mission? How can you make sure your GAS can gets as much attention as the others on your flight? And why is it important for you to make sure the public finds out about your activities? Writer Philip Chien has covered the space program since 1983, and is a regular participant in GAS press conferences. This paper will use STS-57 as a case study showing why some GAS cans got more publicity than others. The paper will offer advice for upcoming GAS payloads and how to prepare your press kits and other handouts.

Chien, Philip↗
NASA NTRS2000

Spring and Summer Changes at the South Pole as Seen by the Mars Orbiter Camera

The Mars Orbiter Camera (MOC) on the Mars Global Surveyor (MGS) spacecraft has been able to follow individual features as the CO2 frost disappears and exposes the material underneath. Because the orbit of MGS is inclined at an angle of 93 degrees relative to the equator, the spacecraft gets especially good coverage of the ring at 87 degrees latitude. The following is a list of phenomena that have been seen during the spring and summer at the South Pole: (1) Circular depressions that are approximately ten meters deep and hundreds of meters in diameter. They are found only within the residual polar cap, the part that survives the summer. The high areas between the depressions are flat-topped mesas whose sides are concave circular arcs. In some places the depressions form patterns that exhibit north-south symmetry, suggesting some control by sunlight; (2) Dark layers that are exposed on the walls of the mesas. Each layer is at most a few meters thick. The dark layers might accumulate during climatic episodes of high atmospheric dust content, or they might accumulate during the annual cycling of dusty CO2; (3) Albedo differences that develop during the summer within the residual cap. These include subtle darkening of the floors of the depressions relative to the mesas and occasional major darkening of the floors, especially near the edge of the cap. The floors and mesas form a distinct stratum, suggesting they represent a distinct compositional boundary. For instance the floors may be water and the mesas may be CO2; (4) Small dark features that appear in spring on the seasonal frost outside the residual cap. Some of the features have parallel tails that are clearly shaped by the wind. Others are more symmetric, like dark snowflakes, with multiple branching arms. After the CO2 frost has disappeared the arms are seen as troughs and the centers as topographic lows; (5) Polygons whose sides are dark troughs. Those that are outside the residual cap seem to disappear when the frost disappears. The polygons and the dark snowflakelike structures may be related, and suggest that CO2 frost may form cohesive slabs; (6) Irregular depressions outside the residual cap. They look like degraded versions of the circular depressions inside the residual cap, and may be a remnant of the cap's changing location; and (7) Areas of burial and exhumation of circular depressions. Thomas et al. give an example with a sharp boundary: On one side the depressions are buried and on the other side they are exposed. In other cases there are rounded troughs up to one kilometer wide, which are dark in summer and appear to have eroded down below the floor of the circular depressions.

Ingersoll, A. P.↗
NASA NTRS2002

Simulation of TRMM Microwave Imager Brightness Temperature using Precipitation Radar Reflectivity for Convective and Stratiform Rain Areas over Land

Rain is highly variable in space and time. In order to measure rainfall over global land with satellites, we need observations with very high spatial resolution and frequency in time. On board the Tropical Rainfall Measuring Mission (TRMM) satellite, the Precipitation Radar (PR) and Microwave Imager (TMI) are flown together for the purpose of estimating rain rate. The basic method to estimate rain from PR has been developed over the past several decades. On the other hand, the TMI method of rain estimation is still in the state development, particularly over land. The objective of this technical memorandum is to develop a theoretical framework that helps relate the observations made by these two instruments. The principle result of this study is that in order to match the PR observations with the TMI observations in convective rain areas, a mixed layer of graupel and supercooled water drops above the freezing level is needed. On the other hand, to match these observations in the stratiform region, a layer of snowflakes with appropriate densities above the freezing level, and a melting layer below the freezing level, are needed. This understanding can lead to a robust rainfall estimation technique from the microwave radiometer observations.

Prabhakara, C.↗
NASA NTRS2008

A Physical Model to Estimate Snowfall over Land using AMSU-B Observations

In this study, we present an improved physical model to retrieve snowfall rate over land using brightness temperature observations from the National Oceanic and Atmospheric Administration's (NOAA) Advanced Microwave Sounder Unit-B (AMSU-B) at 89 GHz, 150 GHz, 183.3 +/- 1 GHz, 183.3 +/- 3 GHz, and 183.3 +/- 7 GHz. The retrieval model is applied to the New England blizzard of March 5, 2001 which deposited about 75 cm of snow over much of Vermont, New Hampshire, and northern New York. In this improved physical model, prior retrieval assumptions about snowflake shape, particle size distributions, environmental conditions, and optimization methodology have been updated. Here, single scattering parameters for snow particles are calculated with the Discrete-Dipole Approximation (DDA) method instead of assuming spherical shapes. Five different snow particle models (hexagonal columns, hexagonal plates, and three different kinds of aggregates) are considered. Snow particle size distributions are assumed to vary with air temperature and to follow aircraft measurements described by previous studies. Brightness temperatures at AMSU-B frequencies for the New England blizzard are calculated using these DDA calculated single scattering parameters and particle size distributions. The vertical profiles of pressure, temperature, relative humidity and hydrometeors are provided by MM5 model simulations. These profiles are treated as the a priori data base in the Bayesian retrieval algorithm. In algorithm applications to the blizzard data, calculated brightness temperatures associated with selected database profiles agree with AMSU-B observations to within about +/- 5 K at all five frequencies. Retrieved snowfall rates compare favorably with the near-concurrent National Weather Service (NWS) radar reflectivity measurements. The relationships between the NWS radar measured reflectivities Z(sub e) and retrieved snowfall rate R for a given snow particle model are derived by a histogram matching technique. All of these Z(sub e)-R relationships fall in the range of previously established Z(sub e)-R relationships for snowfall. This suggests that the current physical model developed in this study can reliably estimate the snowfall rate over land using the AMSU-B measured brightness temperatures.

Kim, Min-Jeong↗