Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spalling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Shock-induced twinning/detwinning and spall failure in Cu–Ta nanolaminates at atomic scales

Here, this study provides new insights into the role of interfaces on the deformation and failure mechanisms in shock-loaded Cu–Ta–Cu trilayer system. The thickness of the Ta layer, piston velocities, and shock pulse durations were varied to explore the impact of impedance mismatch and loading conditions on spallation behavior and twin formation. It was found that the interfaces play a crucial role in the dynamic response of these multilayered systems since secondary reflection waves generated at the interfaces significantly affected the peak stress and pressure profiles, influencing void nucleation and failure modes. In the trilayer systems, failure predominantly occurred at interfaces and within the Ta layer, with void nucleation sites and twinning behavior being markedly different compared to single-crystal Cu and Ta. Increasing the Ta layer thickness modified the wave interactions, leading to different failure locations. Higher piston velocities were associated with increased spall strength by enhancing wave interactions and void formation, particularly at the interfaces and within the Ta layer, under specific configurations. Additionally, shorter shock pulse durations facilitated earlier initiation of the release fan, reducing twin formation and altering the failure dynamics by accelerating twin annihilation and pressure release.

36 MATERIALS SCIENCE↗

Improving Performance of III-V Solar Cells Grown on Spalled Germanium with Ex Situ Substrate Planarization

Controlled spalling allows removal of devices and provides an opportunity for cost reduction through substrate reuse. However, the fracture-based process can leave behind morphological surface features, notably river lines, that can disrupt epitaxial growth and degrade device performance. We investigate the viability of various wet etch chemistries to planarize river lines to ensure high-quality device growth and performance without mechanical repolishing, and so maintain a route towards cost-effective reuse. Etching in a HF: HNO 3 :CH 3 COOH solution effectively planarizes river lines and produces a surface that yields devices with equivalent performance to those grown on epi-ready Ge wafer surfaces. Further studies will focus on optimizing etch composition, temperature, and time to minimize material removal while maintaining a suitable surface for high-quality epitaxy.

germanium↗

A spall and diffraction study of nanosecond pressure release across the iron ε-α phase boundary

The extreme response of polycrystalline iron at high pressures and high strain rates is revealed by means of high-power laser pulses. The compression portion of the pulse coupled with x-ray diffraction identifies the expected body-centered cubic (α) to hexagonal close packed (ε) displacive transformation. Upon release, observation shows that the complete reverse transformation takes approximately 8 ns and that the structure returns to its initial microstructural configuration, in a reversible transformation path. This is in good agreement with molecular dynamics (MD) simulations which predict an inverse dependence between transformation time and strain rate. The grain size is reduced from μm to nm range during compression and begins increasing back to the original grain size on decompression. The kinetics of the transition is dictated by heterogenous nucleation as it follows the Johnson-Mehl-Avrami-Kolmogorov equation with the appropriate time exponent of ~1. This is confirmed by MD simulations which also identify profuse twinning and dislocation generation. Here, the tensile pulse generated upon reflection at the free surface is captured by time-resolved free surface velocity measurements from which a peak tensile stress of 7 GPa is obtained, in stark contrast with its quasi-static value of ~200 MPa. At these strain rates, the strength of grain interiors, which is determined by twinning and slip exceeds the strength of the boundaries, and failure initiates preferentially in the latter.

36 MATERIALS SCIENCE↗

(U) PAGOSA Sample Problems. Spall and Damage

Our principal motivation for putting together these samples was to have a document on fracture modeling in PAGOSA accessible to a new user of the code. To this end, the samples emphasize basic principles and provide a broad overview of fracture modeling. Version 17.2 of PAGOSA was used in all the simulations. The associated Input Reference Manual is LA-CP-14-20250 (November 2014).

36 MATERIALS SCIENCE↗

Skew photonic Doppler velocimetry to investigate the expansion of a cloud of droplets created by micro-spalling of laser shock-melted metal foils

Dynamic fragmentation in the liquid state after shock-induced melting, usually referred to as micro-spallation, is an issue of great interest for both basic and applied sciences. Recent efforts have been devoted to the characterization of the resulting ejecta, which consist in a cloud of fine molten droplets. Major difficulties arise from the loss of free surface reflectivity at shock breakout and from the wide distribution of particle velocities within this cloud. We present laser shock experiments on tin and aluminium, to pressures ranging from about 70 to 160 GPa, with complementary diagnostics including a photonic Doppler velocimeter set at a small tilt angle from the normal to the free surface, which enables probing the whole cloud of ejecta. The records are roughly consistent with a one-dimensional theoretical description accounting for laser shock loading, wave propagation, phase transformations, and fragmentation. The main discrepancies between measured and calculated velocity profiles are discussed in terms of edge effects evidenced by transverse shadowgraphy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Standard Operating Procedure (SOP) Repair Of Cracks And Spalls Within The Concrete Facade Covering The Runit Island Waste Containment Structure

The concrete repair shall be performed using a combination of pre-packaged cement-based mortar (Structural Concrete® V/O) supplied by Five Star Products, Inc., and CRACKBOND® products from Adhesive Technology Corp., Pompano Beach, Florida. Five Star Structural Concrete® V/O is a high strength, rapid setting, one component, permanent concrete repair material used primarily for vertical and overhead structural repairs. The material produces a repair which is dimensionally stable, develops an integral bond to existing concrete, and restores structural integrity within hours of placement (Five Star DESIGN-A-SPEC™ Guidelines). The CRACKBOND® family of products are two component, high strength structural epoxy formulations specifically designed to repair cracks in concrete.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Repair of Cracks and Spalls within the Concrete Façade Covering the Runit Island Waste Containment Structure (V.2.0)

The concrete repair shall be performed using a combination of pre-packaged cement-based mortar (Structural Concrete® V/O) supplied by Five Star Products, Inc., and CRACKBOND® products from Adhesive Technology Corp., Pompano Beach, Florida. Five Star Structural Concrete® V/O is a high strength, rapid setting, one component, permanent concrete repair material used primarily for vertical and overhead structural repairs. The material produces a repair which is dimensionally stable, develops an integral bond to existing concrete, and restores structural integrity within hours of placement (Five Star DESIGN-A-SPEC™ Guidelines). The CRACKBOND® family of products are two component, high strength structural epoxy formulations specifically designed to repair cracks in concrete.

54 ENVIRONMENTAL SCIENCES↗