SEARCH · Search NASA

Results for “Stowage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Study of astronaut restraints and mobility aids in a weightless shirtsleeve environment

A study, established to produce needed information about manual performance limits in intravehicular weightlessness such as the motions induced by the astronaut's direct application of force against the body of the vehicle or an object to be moved, is presented. Using both conventional and water immersion techniques, it was possible to develop realistic time estimates for astronaut station-to-station translation in Skylab, to simulate and analyze specific Skylab tasks involving force application and motion dynamics, and to evaluate certain thresholds of force application in weightlessness. The study was divided into three tasks. The first related to locomotion and verification or modification of present Skylab translation timelines. In all cases, translation times were less than the Skylab timelines indicated. The second task studied mass handling and transfer. Specifically, this involved measurement of the astronaut's ability to relocate the Skylab food lockers to stowage levels of three different heights and his ability to transfer the M509 PSS bottles between the OWS and the recharge station. The third task helped define the physical limits of man's ability to perform Skylab translation tasks under weightless conditions.

Loats, H. L., Jr.↗

NASA NTRS1972

A Flying Ejection Seat

To increase aircrewmen's chances for safe rescue in combat zones, the armed forces are investigating advanced escape and rescue concepts that will provide independent flight after ejection and thus reduce the risk of capture. One of the candidate concepts is discussed; namely, a stowable autogyro that serves as the crewman's seat during normal operations and automatically converts to a flight vehicle after ejection. Discussed are (1) the mechanism subsystems that the concept embodies to meet the weight and cockpit-packaging constraints and (2) tests that demonstrated the technical feasibility of the stowage, deployment, and flight operation of the rotor lift system.

Hollrock, R. H.↗

NASA NTRS1973

Rear Steering Inoperative: Apollo 16 Mission

The inoperative condition of the rear steering system of the lunar roving vehicle (Apollo 16) during the initial drive to the modular equipment stowage assembly was investigated. The front and rear steering systems are described, and the failure analyzed. It is concluded that an open circuit must have occurred either in the hand controller potentiometer or between the potentiometer wiper and the summing node.

Source record↗

NASA NTRS1972

The Skylab orbital laboratory.

The Skylab orbital laboratory is described in terms of spacecraft design features, the experiment programs, and the schedule of planned missions. Attention is given to flight and crew operations, rescue measures, the Multiple Docking Adapter, the Airlock Module, the Workshop, the Apollo Telescope Mount, Saturn V booster, Command and Service Modules, the life support system, thermal and environmental control, electrical power, attitude and pointing control, instrumentation and communications, crew equipment, provisions, and stowage.

Schneider, W. C.↗

NASA NTRS1973

Apollo 14 and Apollo 16 heavy-particle dosimetry experiments.

Doses of heavy particles at positions inside the command modules of Apollo missions 8, 12, 14, and 16 correlate well with the calculated effects of solar modulation of the primary cosmic radiation. Differences in doses at different stowage positions indicate that the redistribution of mass within the spacecraft could enhance safety from the biological damage that would otherwise be expected on manned, deep-space missions.

Fleischer, R. L.↗

NASA NTRS1973

Free-flying teleoperator requirements and conceptual design.

A teleoperator, as defined by NASA, is a remotely controlled cybernetic man-machine system designed to augment and extend man's sensory, manipulative, and cognitive capabilities. Teleoperator systems can fulfill an important function in the Space Shuttle program. They can retrieve automated satellites for refurbishment and reuse. Cargo can be transferred over short or large distances and orbital operations can be supported. A requirements analysis is discussed, giving attention to the teleoperator spacecraft, docking and stowage systems, display and controls, propulsion, guidance, navigation, control, the manipulators, the video system, the electrical power, and aspects of communication and data management. Questions of concept definition and evaluation are also examined.

Onega, G. T.↗

NASA NTRS1973

Crew interface specifications development functions, phase 3A

The findings and data products developed during the crew interface specification study for inflight maintenance and stowage functions are presented. Guidelines are provided for improving the present progress of defining, controlling, and managing the flight crew requirements. The following data products were developed: (1) description of inflight maintenance management process, (2) specifications for inflight maintenance management requirements, and (3) suggested inflight maintenance data processing reports for logistics management.

Carl, J. G.↗

NASA NTRS1973

Method of and device for determining the characteristics and flux distribution of micrometeorites

A micrometeorite impact sensing method of and device for determining the characteristics and flux distribution of micrometeorites are discussed. The method consists of exposing to the micrometeorite environment, a panel of sheet material of a thickness to be punctured by impacting micrometeorites and then scanning the panel with a scanner which produces an output representing the number and size of the puncture holes in the panel. After, exposure, the panel is scanned for puncture holes by illuminating one side of the panel and retracting the panel into its stowage container past a photoelectric scanner which produces an output representing the incident light.

Meissinger, H. F.↗

NASA NTRS1974

Spacelab soft mockup comparative evaluation

An assessment of two proposed Spacelab configurations with diameters of 14 and 12 feet was conducted by using two inexpensive wooden mockups containing cardboard fixtures. Also examined was an alternate mounting arrangement for the 12-foot diameter configuration, taking advantage of conforming equipment racks to the cylinder walls. A volume comparison of the three configurations was made using a life sciences payload which is considered to be one of the more voluminous payloads. It was found that crew volume in the 12-foot baseline configuration appeared marginal for the life sciences payload, especially where crewmen were engaged in activities with competing demands. The 12-foot configurations of life sciences payloads offered little margin for stowage or equipment growth. Increased demands would necessitate longer module lengths. Similar results could be expected with other large volume payloads.

Watters, H.↗

NASA NTRS1974

MSFC Skylab Orbital Workshop, volume 4

The design and development of specific systems on the Skylab Orbital Laboratory are discussed. The subjects considered are: (1) pressure garment conditioning system, (2) stowage system, (3) ground support equipment systems, and (4) marking systems illustrations of the system components are provided. Results of performance tests are discussed.

Source record↗

NASA NTRS1974

Space shuttle/food system study. Volume 2, Appendix F: Flight food and primary packaging

The analysis and selection of food items and primary packaging, the development of menus, the nutritional analysis of diet, and the analyses of alternate food mixes and contingency foods is reported in terms of the overall food system design for space shuttle flight. Stowage weights and cubic volumes associated with each alternate mix were also evaluated.

Source record↗

NASA NTRS1974

Space shuttle/food system study. Volume 2, appendix E: Alternate flight systems analysis

The functional requirements of stowage, preparation, serving, consumption, and cleanup were applied to each of the five food mixes selected for study in terms of the overall design of the space shuttle food system. The analysis led to a definition of performance requirements for each food mix, along with a definition of equipment to meet those requirements. Weight and volume data for all five systems, in terms of food and packaging, support equipment, and galley installation penalties, are presented.

Source record↗

NASA NTRS1975

Simulation of man-machine interaction on shuttle payload manipulator

The main objective of this simulation was to evaluate the feasibility of a simplified control system for a remote manipulator for space shuttle payloads. The motion commanded by the operator through the control system to the six degree of freedom manipulator approximates that of a backhoe. Compatibility of low arm damping, heavy payloads, small clearances in the shuttle cargo bay and stringent mission timelines were evaluated. The effects of various devices to enhance visual cues were evaluated. Phase I of the simulation was capture of a payload flying free in space relative to the shuttle. Phase II was simulation of cargo stowage into a mockup of the space shuttle cargo bay. A shuttle remote manipulator control station mockup including TV monitors and hand controllers is used in the simulation. Results evaluating various parameters of the control system and the task, including arm flexibility, are presented.

Hookway, R. O.↗

NASA NTRS1975

Design synthesis of the SEPS

This paper summarizes the most current configuration of the Solar Electric Propulsion Stage (SEPS) design resulting from the synthesis of key tradeoff analyses. The baseline SEPS is a 21-kW propulsion-power vehicle using the Shuttle/Interim Upper Stage (IUS) launch vehicle for planetary and geosynchronous missions. The trade analyses supporting the baseline configuration include ion thruster array pattern, solar array stowage concepts, and number of thrusters and power processors (PP). In addition, an integrated thermal control and structural system was optimized and designed to meet flight loads and dynamics requirements. Payload provisions, mercury propellant refueling, and design compatibility of the SEPS and Shuttle/IUS are presented.

Horio, S. P.↗

NASA NTRS1975

Waste management system

The function of the waste management system was to control the disposition of solid and liquid wastes and waste stowage gases. The waste management system consisting of a urine subsystem and a fecal subsystem is described in detail and its overall performance is evaluated. Recommendations for improvement are given.

Richard L. Sauer↗

NASA NTRS1976

Space shuttle Ku-band integrated rendezvous radar/communications system study

The results are presented of work performed on the Space Shuttle Ku-Band Integrated Rendezvous Radar/Communications System Study. The recommendations and conclusions are included as well as the details explaining the results. The requirements upon which the study was based are presented along with the predicted performance of the recommended system configuration. In addition, shuttle orbiter vehicle constraints (e.g., size, weight, power, stowage space) are discussed. The tradeoffs considered and the operation of the recommended configuration are described for an optimized, integrated Ku-band radar/communications system. Basic system tradeoffs, communication design, radar design, antenna tradeoffs, antenna gimbal and drive design, antenna servo design, and deployed assembly packaging design are discussed. The communications and radar performance analyses necessary to support the system design effort are presented. Detailed derivations of the communications thermal noise error, the radar range, range rate, and angle tracking errors, and the communications transmitter distortion parameter effect on crosstalk between the unbalanced quadriphase signals are included.

Source record↗

NASA NTRS1976

A mobile planetary lander utilizing elastic loop suspension

Efforts to increase the cost effectiveness of future lunar and planetary rover missions have led to the mobile lander concept, which replaces the landing legs of a soft-lander craft with a compact mobility system of sufficient strength to withstand the landing impact. The results of a mobile lander conceptual design effort based on existing NASA-Viking '75 hardware are presented. The elastic loop concept, developed as a post-Apollo rover technology, is found to meet stringent stowage, traction, power and weight requirements.

Trautwein, W.↗

NASA NTRS1976

The Evolution of the Viking Landing Gear

The primary function of the landing gear is to dissipate touchdown energy in a controlled fashion that minimizes the landing shock for onboard components while maximizing ground clearance and the probability of landing stability over the range of possible surface and touchdown parameter variations. Many other mission requirements and constraints were translated into the evolving Viking landing gear design as they arose. Hence, design considerations included such factors as prelaunch heat sterilization and noncontamination of the Martian landing site, gear stowage and deployment, terminal descent engine shutdown initiation, structural load attenuation, hard/soft landing surface capability, reliability, weight, and post-landed stability.

Pohlen, J. C.↗