SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Calibration technique detects minute laminar-type discontinuities in thin metal strip stock. Patterns of plastic tape are preselected to include minutely calculated discontinuities and the tape is applied to the strip stock to intercept the incident sonic beam.
Two tools facilitate chemical stripping of insulation on flat conductor cabling. A tape pressing tool and a taping fixture apply adhesive lead tape with the proper amount of pressure to protect the remaining insulation from the chemical stripping solution.
Stripping and low-energy collisions of H atoms on O and N molecules, showing target ionization to projectile stripping ratio dependence on ionization potential
This paper describes a dual beam thruster that has been designed, constructed, and tested. The system is suitable for two-axes attitude control and is comprised of two orthogonal strips, each capable of producing 0.30 mlb thrust and beam deflections of more than plus or minus 20 deg. The nominal specific impulse for the thruster is 5000 sec, and the thrust level from each strip can be varied from 0 to 100%. Neutralizer filaments that were developed and life tested over 2000 hours producing more than 40 mA of electron emission per watt of input power are also discussed. The system power required for clean ionizers is approximately 200 W.
There are no author-identified significant results in this report. Analysis of the strip mine records and aerial photos in the test site (five counties in southeastern Ohio) indicate rapidly increasing stripping in the past few years. The mines are large enough to be detected and their gross characteristics observed in the ERTS-1 imagery. Progress in adapting the Bendix ground station to handling ERTS-1 computer compatible tapes is described.
The elastostatic plane problem of an infinite strip containing two symmetrically located internal cracks perpendicular to the boundary is formulated in terms of a singular integraL equation with the derivative of the crack surface displacement as the density function. The solution of the problem is obtained for various crack geometries and for uniaxial tension applied to the strip away from the crack region. The limiting case of the edge cracks is then considered in some detail. The fundamental function of the integral equation is obtained and a numerical technique for solving the singular integral equations with this particular type of fundamental function which is characteristic of the edge cracks is described. The stress intensity factor for the complete range of net ligament-to-width ratio is calculated. The results also include the solution of the edge crack problem in an elastic half plane.
The author has identified the following significant results. Computer techniques were applied to process ERTS tapes acquired over coal mining operations in southeastern Ohio on 21 August 1972 and 3 September 1973. ERTS products obtained included geometrically correct map overlays showing stripped earth, partially reclaimed earth, water, and natural vegetation. Computer-generated tables listing the area covered by each land-water category in square kilometers and acres were produced. By comparing these mapping products, the study demonstrates the capability of ERTS to monitor changes in the extent of stripping, success of reclamation, and the secondary effects of mining on the environment.
The elastostatic plane problem of an infinite strip containing two symmetrically located internal cracks perpendicular to the boundary is formulated in terms of a singular integral equation with the derivative of the crack surface displacement as the density function. The solution of the problem is obtained for various crack geometries and for uniaxial tension applied to the strip away from the crack region. The limiting case of the edge cracks is then considered in some detail. The fundamental function of the integral equation is obtained and a numerical technique for solving the singular integral equations with this particular type of fundamental function which is characteristic of the edge cracks is described. The stress-intensity factor for the complete range of net ligament-to-width ratio is calculated. The results also include the solution of the edge crack problem in an elastic half plane.
Energy spectra of nearly stripped carbon and oxygen nuclei were observed during several solar particle events indicating a systematic deviation of these spectra from a simple power law. The spectra bend below 100 keV per nucleon and the degree of turn-over are highly correlated with the size of the flare, as measured by the event averaged flux of 130 to 220 keV protons. The energy spectra of helium computed for the same time periods do not show a similar feature. A large variability of the alpha/CNO ratio from event to event (from 2 to about 20 at 40 keV per nucleon) is found, and, in all cases examined, the carbon and oxygen nuclei are nearly fully stripped. These results are interpreted as evidence for storage of energetic ions in hot (T sub e is approximatey 1.5 million K) coronal regions, followed by strong adiabatic deceleration.
Various existing unsteady aerodynamic strip theories which have been developed in the past for both fixed and rotary wing aeroelastic analyses are modified in the paper so as to make them applicable to the coupled flap-lag-torsional aeroelastic problem of a rotor blade in hover. These corrections are primarily due to constant angle of attack, constant inflow and variable free stream velocity due to lead-lag motion. Next, the modified strip theories are incorporated in a coupled flap-lag-torsional aeroelastic analysis of the rotor blade in hover and the sensitivity of the aeroelastic stability boundaries to the aerodynamic assumptions is examined.
The plane elastostatic problem of internal and edge cracks in an infinite orthotropic strip is considered. The problems for the material types 1 and 2 are formulated in terms of singular integral equations. For the symmetric case the stress intensity factors are calculated and are compared with the isotropic results. The results show that because of the dependence of the Fredholm kernels on the elastic constants, unlike the crack problem for an infinite plane, in the strip the stress intensity factors are dependent on the elastic constants and are generally different than the corresponding isotropic results.
A technique is described for calculating the stress intensity factors in a strip under bending by treating the strip as a two-dimensional continuum rather than a simple beam in evaluating the crack surface tractions used for the solution of the perturbation problem.
The plane elastostatic problem of internal and edge cracks in an infinite orthotropic strip is considered. The problems for the material types I and II are formulated in terms of singular integral equations. For the symmetric case the stress intensity factors are calculated and are compared with the isotropic results. The results show that because of the dependence of the Fredholm kernels on the elastic constants, unlike the crack problem for an infinite plane, in the strip the stress intensity factors are dependent on the elastic constants and are generally different from the corresponding isotropic results.
Three laser wire strippers have been built for the stripping of Kapton-insulated wire, the baseline wire of the space shuttle orbiter. The strippers are: (1) a bench-model stripper powered with a cw CO2 10.6-micron laser, (2) a hand-held stripper powered with a cw 1.06-micron Nd-YAG laser with an output of 5-7 watts, and (3) a hand-held stripper with a five-inch-long CO2 laser inside the stripping head.
The plane elastostatic problem of internal and edge cracks in an infinite orthotropic strip is considered. The problems for the material types I and II are formulated in terms of singular integral equations. For the symmetric case the stress-intensity factors are calculated and are compared with the isotropic results. The results show that because of the dependence of the Fredholm kernels on the elastic constants in the strip (unlike the crack problem for an infinite plane) the stress-intensity factors are dependent on the elastic constants and are generally different from the corresponding isotropic results
The problem of a semi infinite strip containing an edge crack is considered. It is assumed that the strip is loaded by a frictionless rigid wedge pressed into the crack. The resulting crack contact problem is formulated in terms of a system of singular integral equations. The behavior of the solution near the singular points is studied in detail. A series of numerical examples are given and the results are compared with those obtained by the method of boundary collocation and by the simple beam theory.
The author has identified the following significant results. LANDSAT imagery and supplementary aircraft photography of the New River drainage basin were subjected to a multilevel analysis using conventional photointerpretation methods, densitometric techniques, multispectral analysis, and statistical tests to determine the accuracy of LANDSAT-1 imagery for measuring strip mines of common size. The LANDSAT areas were compared with low altitude measurements. The average accuracy over all the mined land sample areas mapped from LANDSAT-1 was 90%. The discrimination of strip mine subcategories is somewhat limited on LANDSAT imagery. A mine site, whether active or inactive, can be inferred by lack of vegetation, by shape, or image texture. Mine ponds are difficult or impossible to detect because of their small size and turbidity. Unless bordered and contrasted with vegetation, haulage roads are impossible to delineate. Preparation plants and refuge areas are not detectable. Density slicing of LANDSAT band 7 proved most useful in the detection of reclamation progress within the mined areas. For most state requirements for year-round monitoring of surface mined land, LANDSAT is of limited value. However, for periodic updating of regional surface maps, LANDSAT may provide sufficient accuracies for some users.
The operation of mechanical and thermal strippers and the early development of laser wire strippers are reviewed. NASA sponsored development of laser wire stripping for space shuttle includes bench-type strippers as well as an advanced portable hand-held stripper which incorporates a miniaturized carbon dioxide laser and a rotating optics unit with a gas-jet assist and debris exhaust. Drives and controls girdle the wire and slit the remaining slug without manual assistance. This unit can strip wire sizes 26 through 12 gage. A larger-capacity hand-held unit for wire sizes through 1/0 gage was built using a neodynium-doped yttrium aluminum garnet (Nd:YAG) laser. The hand-held units have a flexible umbilical cable to an accompanying cart that carries the power supply, gas supply, cooling unit, and the controls.