Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Venus atmospheric circulation - Known and unknown

Temporally and longitudinally averaged circulation determined from images acquired since 1979 from the Pioneer Venus orbiter has shown significant changes in th meridional flow. The solar-locked structure in the zonal and meridional components of the cloud motions is also observed to change with time. Mechanisms for such changes remain unknown, although planetary waves and a slight modulation of the cloud level have been suggested as explanations. Decomposition of the solar-locked structure into diurnal and semidiurnal components suggests that nightside zonal flow may be 10-20 m/s faster than the average dayside flow. Many aspects of the circulation remain unknown, including the horizontal and vertical structure on the nightside and at levels higher and lower than the UV cloud features, sources, and sinks of UV absorbers, and meridional transports of heat, momentum, and water vapor at different levels.

Limaye, Sanjay Shridhar↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Impacts: Modeling and Observations

This document covers the following topics: Cratering on Titan: Projectiles, Craters and Impact Melt; The Cratering Database: Making Code Jockeys Honest; Popigai Impact Structure Modeling: Morphology and Worldwide Ejecta; Anhydrite EOS and Phase Diagram in Relation to Shock Decomposition; Computational Investigations of the Chesapeake Bay Impact Structure; Hydrocode Simulations of the Chesapeake Bay Impact; Lockne Crater as a Result of Oblique Impact; The Influence of a Deep Shelf Sea on the Excavation and Modification of a Marine-Target Crater, the Lockne Crater, Central Sweden; Pre-Drilling Investigation of the Lake Bosumtwi Impact Crater: Constraints from Geophysics and Numerical Modelling; Central Uplift Formation at the Middlesboro Impact Structure, Kentucky, USA; A SRTM Investigation of Serra da Cangalho Impact Structure, Brazil; Brazilian Impact Craters: A Review; Flynn Creek Impact Structure: New Insights from Breccias, Melt Features, Shatter Cones, and Remote Sensing; The Howell Structure, Lincoln County, Tennessee: A Review of Past and Current Research; After the Chicxulub Impact: Control on Depositional and Diagenetic History of the Cenozoic Carbonate Formations of the Northwestern Yucatan Peninsula, Mexico; Ni Contents by Non-Destructive In-Situ XRF Method of Takamatsu-Kagawa Crater District in Japan; and Akiyoshi Limestone Blocks Transported by the P/T Boundary Event to Japan Islands.

Source record↗
NASA NTRS1987

Structure-borne noise generation and transmission

The structure-borne noise generation and transmission of stiffened and interconnected structures under random loads is presented. The method is based on the transfer matrix for the structural response and on the modal decomposition for the interior acoustic field. The acoustic enclosure is taken to be rectangular in shape of which portion of the boundaries are elastic while the remaining surface is acoustically rigid. Numerical results are presented for a variety of acousto-structural problems.

Lyrintzis, Constantinos S.↗
NASA NTRS1989

An intelligent advisor for the design manager

A design problem is viewed as a complex system divisible into modules. Before the design of a complex system can begin, much time and money are spent in determining the couplings among modules and the presence of iterative loops. This is important because the design manager must know how to group the modules into substems and how to assign subsystems to design teams so that changes in one subsystem will have predictable effects on other subsystems. Determining these subsystems is not an easy, straightforward process and often important couplings are overlooked. Moreover, the planning task must be repeated as new information becomes available or as the design specifications change. The purchase of this research effort is to develop a knowledge-based tool to act as an intelligent advisor for the design manager. This tool identifies the subsystems of a complex design problem, orders them into a well-structured format, and marks the couplings among the subsystems to facilitate the use of multilevel tools. The tool was tested in the decomposition of the COFS (Control of Flexible Structures) mast design which has about 50 modules. This test indicated that this type of approach could lead to a substantial savings by organizing and displaying a complex problem as a sequence of subsystems easily divisible among design teams.

Rogers, James L.↗
NASA NTRS1986

Application of decomposition techniques to the preliminary design of a transport aircraft

A multifaceted decomposition of a nonlinear constrained optimization problem describing the preliminary design process for a transport aircraft has been made. Flight dynamics, flexible aircraft loads and deformations, and preliminary structural design subproblems appear prominently in the decomposition. The use of design process decomposition for scheduling design projects, a new system integration approach to configuration control, and the application of object-centered programming to a new generation of design tools are discussed.

Rogan, J. E.↗
NASA NTRS1993

Optimization by decomposition

An algorithm is presented for solving the structural optimization problem as a set of smaller subproblems that correspond to levels of nested substructures. In all three of the algorithm variants presented, the matching was assisted by means of the behavior and optimum sensitivity derivatives. The algorithm is noted to be intrinsically germane to distributed computing, since the subproblems can be concurrently addressed; the algorithm can also be generalized to those multidisciplinary systems whose subsystems can be arranged into a hierarchy of substructure-like dependencies.

Sobieszczanski-Sobieski, Jaroslaw↗
NASA NTRS2004

CuInS2 Films Deposited by Aerosol-Assisted Chemical Vapor Deposition Using Ternary Single-Source Precursors

Polycrystalline CuInS2 films were deposited by aerosol-assisted chemical vapor deposition using both solid and liquid ternary single-source precursors (SSPs) prepared in-house. Films with either (112) or (204/220) preferred orientation were obtained, and compositional analysis showed that (112)-oriented films contained more copper than (204/220)-oriented films. Using X-ray diffraction, the signature of chalcopyrite structure was often confirmed for (112)-oriented films. The preferred orientation of the film is likely related to the decomposition and reaction kinetics associated with the molecular structure of the precursors at the substrate. Interestingly, the (204/220)-oriented films were always accompanied by a secondary phase, which was identified as an unknown In-rich compound from the results of post-growth annealing, etching experiments, and Raman spectroscopic data. By increasing Cu to In ratio in the film, (112)-oriented films were obtained with a maximum grain size of about 0.5 micrometers, and their X-ray diffractions did not show any observable signature of the In secondary phase. Electrical and optical properties of all the films grown were characterized. They all showed p-type conduction with an electrical resistivity between 0.1 omega cm and 30 omega cm, and an optical band gap of 1.46eV +/- 0.02, as deposited. The material properties of deposited films revealed this methodology of using SSPs for fabricating chalcopyrite-based solar cells to be highly promising.

Jin, Michael H.-C.↗
NASA NTRS2021

Thermal Inspection of a Composite Fuselage Section Using theMethod of Proper Generalized Decomposition

Proper Generalized Decomposition (PGD) is a reduced order modeling technique for the simulation of physical systems whose governing equations depend on boundary conditions, initial conditions, material properties, and geometric parameters. It uses separated representations of system covariates combined with an iterative approximation method known as successive enrichment in order to compute an accurate parameter-dependent approximation to the full governing equations. PGD can also be used as an alternative to the Singular Value Decomposition (SVD) of a matrix and therefore as an alternative to PCA thermography. In this paper PGD was used to analyze data derived from the inspection of a composite fuselage forward section using flash thermography, and the results were compared against the standard PCA approach.

Nondestructive Evaluation↗
NASA NTRS1999

Experimental and Numerical Study of Ammonium Perchlorate Counterflow Diffusion Flames

Many solid rocket propellants are based on a composite mixture of ammonium perchlorate (AP) oxidizer and polymeric binder fuels. In these propellants, complex three-dimensional diffusion flame structures between the AP and binder decomposition products, dependent upon the length scales of the heterogeneous mixture, drive the combustion via heat transfer back to the surface. Changing the AP crystal size changes the burn rate of such propellants. Large AP crystals are governed by the cooler AP self-deflagration flame and burn slowly, while small AP crystals are governed more by the hot diffusion flame with the binder and burn faster. This allows control of composite propellant ballistic properties via particle size variation. Previous measurements on these diffusion flames in the planar two-dimensional sandwich configuration yielded insight into controlling flame structure, but there are several drawbacks that make comparison with modeling difficult. First, the flames are two-dimensional and this makes modeling much more complex computationally than with one-dimensional problems, such as RDX self- and laser-supported deflagration. In addition, little is known about the nature, concentration, and evolution rates of the gaseous chemical species produced by the various binders as they decompose. This makes comparison with models quite difficult. Alternatively, counterflow flames provide an excellent geometric configuration within which AP/binder diffusion flames can be studied both experimentally and computationally.

Smooke, M. D.↗
NASA NTRS1994

The Design Manager's Aid for Intelligent Decomposition (DeMAID)

Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed, the proposed system can be decomposed to identify its hierarchical structure. The design manager's aid for intelligent decomposition (DeMAID) is a knowledge based system for ordering the sequence of modules and identifying a possible multilevel structure for design. Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save considerable money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined.

Rogers, James L.↗
NASA NTRS1990

Substructuring decomposition and controller synthesis

A decentralized design procedure is proposed for the control design for flexible structures. The structure to be controlled is decomposed into several substructures by using a natural decomposition called substructuring decomposition. For each substructure, a subcontroller is designed by using the linear quadratic optimal control theory. Then, a controller synthesis scheme called Substructural Controller Synthesis (SCS) is used to assemble the subcontrollers into a system controller, which is to be used to control the whole structure. A plane truss example is used to illustrate the efficacy of the proposed method.

Su, Tzu-Jeng↗
NASA NTRS1996

Balanced Placement Of Vibration Sensors And Actuators

Mathematical approach that involves Hankel singular values leads to method for estimation of optimal placement of relatively few vibration sensors and actuators in multivariable flexible structure. Approach extends and complements previous developments regarding approximate decomposition, to Hankel singular values, of singular values of controllability and observability grammian matrices of multivariable flexible structure. Mathematical constructs also described in "Designing An Approximately Balanced LQG Compensator" (NPO-19000).

Gawronski, Wodek↗
NASA NTRS2003

CuInS2 Films Deposited by Aerosol-Assisted Chemical Vapor Deposition Using Ternary Single-Source Precursors

Polycrystalline CuInS2 films were deposited by aerosol-assisted chemical vapor deposition using both solid and liquid ternary single-source precursors (SSPs) which were prepared in-house. Films with either (112) or (204/220) preferred orientation, had a chalcopyrite structure, and (112)-oriented films contained more copper than (204/220)-oriented films. The preferred orientation of the film is likely related to the decomposition and reaction kinetics associated with the molecular structure of the precursors at the substrate. Interestingly, the (204/220)-oriented films were always In-rich and were accompanied by a secondary phase. From the results of post-growth annealing, etching experiments, and Raman spectroscopic data, the secondary phase was identified as an In-rich compound. On the contrary, (112)-oriented films were always obtained with a minimal amount of the secondary phase, and had a maximum grain size of about 0.5 micron. Electrical and optical properties of all the films grown were characterized. They all showed p-type conduction with an electrical resistivity between 0.1 and 30 Omega-cm, and an optical band gap of approximately 1.46 eV +/- 0.02, as deposited. The material properties of deposited films revealed this methodology of using SSPs for fabricating chalcopyrite-based solar cells to be highly promising.

Jin, Michael↗
NASA NTRS1984

Noise transmission through aircraft panels

This paper describes analytical and experimental studies of noise transmission through aircraft panels. The theoretical solutions of the governing acoustic-structural equations are developed utilizing modal decomposition and a Galerkin-type procedure. Single, discretely stiffened, and double wall panels are considered. Theoretical predictions are compared with experimental measurements and differences are identified.

Vaicaitis, R.↗
NASA NTRS1985

Noise transmission of double wall composite shells

This paper describes analytical studies of noise transmission of double wall laminated composite cylindrical shells of finite extent. The main objective is to estimate structureborne noise generated by the concentrated random forces. The theoretical solutions of the governing acoustic-structural equations are obtained utilizing modal decomposition. Results indicate that from the viewpoint of noise attenuation the composite shell does not seem to offer advantage over an aluminum shell. However, the orientation of the fibers and the material characteristics of the soft viscoelastic core can be tailored to meet the specific needs of noise attenuation.

Vaicaitis, R.↗
NASA NTRS1986

Vibro-acoustics for Space Station applications

An analytical procedure has been developed to study noise generation in a double wall and single wall cylindrical shell due to mechanical point loads. The objective of this study is to develop theoretical procedures for parametetric evaluation of noise generation andd noise transmission for the habitability modules of the proposed Space Station operation. The solutions of the governing acoustic-structural equations are obtained utilizing modal decomposition. The numerical results include modal frequencies, deflection response spectral densities and interior noise sound pressure levels.

Vaicaitis, R.↗
NASA NTRS1993

Parallel execution of a three-dimensional, chemically reacting, Navier-Stokes code on distributed-memory machines

This paper describes the parallel version of the three-dimensional, chemically reacting, computational fluid dynamics (CFD) code, SPARK. This work was performed on the Intel iPSC/860-based parallel computers. The SPARK code utilizes relatively simple explicit numerical algorithms, but models complex chemical reactions. The code solves the equations over a regular structured mesh so a simple dam decomposition is used to assign work to the individual processors. The explicit nature of the algorithm, combined with the computational intensity of the chemistry calculations, results in a very low communication-to-computation ratio when compared to typical CFD codes. The efficiency of the parallel code is examined and shown to be about 65 percent when the problem size is scaled with the number of processors. Two low-angle wall-jet injection cases are solved to demonstrate the capability of the parallel code for solving large problems efficiently.

Otto, John C.↗
NASA NTRS1993

Computational mechanics analysis tools for parallel-vector supercomputers

Computational algorithms for structural analysis on parallel-vector supercomputers are reviewed. These parallel algorithms, developed by the authors, are for the assembly of structural equations, 'out-of-core' strategies for linear equation solution, massively distributed-memory equation solution, unsymmetric equation solution, general eigen-solution, geometrically nonlinear finite element analysis, design sensitivity analysis for structural dynamics, optimization algorithm and domain decomposition. The source code for many of these algorithms is available from NASA Langley.

Storaasli, O. O.↗