Acceptance testing - Space vehicle design criteria /structures/
Standardization of structural acceptance tests conducted on flight hardware
Source record↗
SEARCH · Search NASA
Results for “Structures, Design and Test”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Loading tests of a wing structure for a hypersonic aircraft
Room-temperature loading tests were conducted on a wing structure designed with a beaded panel concept for a Mach 8 hypersonic research airplane. Strain, stress, and deflection data were compared with the results of three finite-element structural analysis computer programs and with design data. The test program data were used to evaluate the structural concept and the methods of analysis used in the design. A force stiffness technique was utilized in conjunction with load conditions which produced various combinations of panel shear and compression loading to determine the failure envelope of the buckling critical beaded panels The force-stiffness data did not result in any predictions of buckling failure. It was, therefore, concluded that the panels were conservatively designed as a result of design constraints and assumptions of panel eccentricities. The analysis programs calculated strains and stresses competently. Comparisons between calculated and measured structural deflections showed good agreement. The test program offered a positive demonstration of the beaded panel concept subjected to room-temperature load conditions.
Fields, R. A.↗
Influence of specimen design and test procedure on results of buckling tests of shell structures.
Shell structures buckling test data dependence on specimen design and test procedure, discussing stress concentrations, materials selection and strain gages
Peterson, J. P.↗
Design, analysis, and testing of a hybrid scale structural dynamic model of a Space Station
The impracticality of testing the fully-assembled on-orbit configurations of future large erectable space platforms fosters an increased reliance on other means for verifying predicted structural dynamic performance. One option is scale modeling. This paper discusses the design of a hybrid scale dynamic test model of the Freedom Space Station and its associated suspension system. Hybrid scaling laws are reviewed, followed by scale factor trades, component design examples, and an analytical evaluation of the overall model fidelity. Component and subassembly test results from a six-bay hybrid scale model truss are presented. Potential interactions of gravity and the suspension system with the free-free dynamics of the scale model are investigated. Suspension system design parameters, such as the number, location, mass, and stiffness of the suspension devices are traded to minimize undesirable interactions and form the basis for an overall suspension system concept for the scale model.
Gronet, Marc J.↗
Automatic Parametric Testing Of Integrated Circuits
Computer program for parametric testing saves time and effort in research and development of integrated circuits. Software system automatically assembles various types of test structures and lays them out on silicon chip, generates sequency of test instructions, and interprets test data. Employs self-programming software; needs minimum of human intervention. Adapted to needs of different laboratories and readily accommodates new test structures. Program codes designed to be adaptable to most computers and test equipment now in use. Written in high-level languages to enhance transportability.
Jennings, Glenn A.↗
Optimum structural design based on reliability and proof-load testing
Proof-load test eliminates structures with strength less than the proof load and improves the reliability value in analysis. It truncates the distribution function of strength at the proof load, thereby alleviating verification of a fitted distribution function at the lower tail portion where data are usually nonexistent.
Shinozuka, M.↗
A comparison of controller designs for an experimental flexible structure
Control systems design and hardware testing are addressed for an experimental structure that displays the characteristics of a typical flexible spacecraft. The results of designing and implementing various control design methodologies are described. The design methodologies under investigation include linear quadratic Gaussian control, static and dynamic dissipative controls, and H-infinity optimal control. Among the three controllers considered, it is shown, through computer simulation and laboratory experiments on the evolutionary structure, that the dynamic dissipative controller gave the best results in terms of vibration suppression and robustness with respect to modeling errors.
Lim, K. B.↗
Effects of Structural Flexibility on Spacecraft Control Systems
Design and test criteria regarding structural flexibility effects on spacecraft stability and control systems
Source record↗
Analysis, design, and testing of a low cost, direct force command linear proof mass actuator for structural control
In this paper, the design, analysis, and test of a low cost, linear proof mass actuator for vibration control is presented. The actuator is based on a linear induction coil from a large computer disk drive. Such disk drives are readily available and provide the linear actuator, current feedback amplifier, and power supply for a highly effective, yet inexpensive, experimental laboratory actuator. The device is implemented as a force command input system, and the performance is virtually the same as other, more sophisticated, linear proof mass systems.
Slater, G. L.↗
Assessment of space vehicle aeroacoustic- vibration prediction, design, and testing
Space vehicle structural vibration induced by acoustic and aerodynamic noise
Fuller, C. M.↗
Design, fabrication, and test of lightweight shell structure, phase 2
Explore the source record for details and available documents.
Source record↗
Construction and testing of simple airfoils to demonstrate structural design, materials choice, and composite concepts
The objective of this educational exercise is to have students build and evaluate simple wing structures, and in doing so, learn about materials choices and lightweight construction methods. A list of equipment and supplies and the procedure for the experiment are presented.
Bunnell, L. Roy↗
AN INVESTIGATION OF STRUCTURAL CONCEPTS FOR A MACH 3 PLUS SUPERSONIC TRANSPORT WING
Structural design, fabrication and testing of a wing panel for mach 3 plus supersonic transport aircraft
STRUCTURAL DESIGN↗
Test Structures For Bumpy Integrated Circuits
Cross-bridge resistors added to comb and serpentine patterns. Improved combination of test structures built into integrated circuit used to evaluate design rules, fabrication processes, and quality of interconnections. Consist of meshing serpentines and combs, and cross bridge. Structures used to make electrical measurements revealing defects in design or fabrication. Combination of test structures includes three comb arrays, two serpentine arrays, and cross bridge. Made of aluminum or polycrystalline silicon, depending on material in integrated-circuit layers evaluated. Aluminum combs and serpentine arrays deposited over steps made by polycrystalline silicon and diffusion layers, while polycrystalline silicon versions of these structures used to cross over steps made by thick oxide layer.
Buehler, Martin G.↗
Approach for Structurally Clearing an Adaptive Compliant Trailing Edge Flap for Flight
The Adaptive Compliant Trailing Edge (ACTE) flap was flown on the National Aeronautics and Space Administration (NASA) Gulfstream GIII testbed at the NASA Armstrong Flight Research Center. This smoothly curving flap replaced the existing Fowler flaps creating a seamless control surface. This compliant structure, developed by FlexSys Inc. in partnership with the Air Force Research Laboratory, supported NASA objectives for airframe structural noise reduction, aerodynamic efficiency, and wing weight reduction through gust load alleviation. A thorough structures airworthiness approach was developed to move this project safely to flight. A combination of industry and NASA standard practice require various structural analyses, ground testing, and health monitoring techniques for showing an airworthy structure. This paper provides an overview of compliant structures design, the structural ground testing leading up to flight, and the flight envelope expansion and monitoring strategy. Flight data will be presented, and lessons learned along the way will be highlighted.
flight test↗
Design, Fabrication and Test of Composite Curved Frames for Helicopter Fuselage Structure
Aspects of curved beam effects and their importance in designing composite frame structures are discussed. The curved beam effect induces radial flange loadings which in turn causes flange curling. This curling increases the axial flange stresses and induces transverse bending. These effects are more important in composite structures due to their general inability to redistribute stresses by general yielding, such as in metal structures. A detailed finite element analysis was conducted and used in the design of composite curved frame specimens. Five specimens were statically tested and compared with predicted and test strains. The curved frame effects must be accurately accounted for to avoid premature fracture; finite element methods can accurately predict most of the stresses and no elastic relief from curved beam effects occurred in the composite frames tested. Finite element studies are presented for comparative curved beam effects on composite and metal frames.
Lowry, D. W.↗
Four experimental demonstrations of active vibration control for flexible structures
Laboratory experiments designed to test prototype active-vibration-control systems under development for future flexible space structures are described, summarizing previously reported results. The control-synthesis technique employed for all four experiments was the maximum-entropy optimal-projection (MEOP) method (Bernstein and Hyland, 1988). Consideration is given to: (1) a pendulum experiment on large-amplitude LF dynamics; (2) a plate experiment on broadband vibration suppression in a two-dimensional structure; (3) a multiple-hexagon experiment combining the factors studied in (1) and (2) to simulate the complexity of a large space structure; and (4) the NASA Marshall ACES experiment on a lightweight deployable 45-foot beam. Extensive diagrams, drawings, graphs, and photographs are included. The results are shown to validate the MEOP design approach, demonstrating that good performance is achievable using relatively simple low-order decentralized controllers.
Phillips, Doug↗
Integrated Optical Design Analysis (IODA): New Test Data and Modeling Features
A general overview of the capabilities of the IODA ("Integrated Optical Design Analysis") exchange of data and modeling results between thermal, structures, optical design, and testing engineering disciplines. This presentation focuses on new features added to the software that allow measured test data to be imported into the IODA environment for post processing or comparisons with pretest model predictions. software is presented. IODA promotes efficient
Moore, Jim↗