Search NASA⌕ Search

SEARCH · Search NASA

Results for “Symmetry relations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Determination of forces in a magnetic bearing actuator - Numerical computation with comparison to experiment

Calculations of the forces exerted on a journal by a magnetic bearing actuator are presented, along with comparisons to experimentally measured forces. The calculations are based on two-dimensional solutions for the flux distribution in the metal parts and free space, using finite but constant permeability in the metals. Above a relative permeability of 10,000 the effects of changes in permeability are negligible, but below 10,000 decreases in permeability cause significant decreases in the force. The calculated forces are shown to depend on the metal permeability more strongly when the journal is displaced from its centered position. The predicted forces in the principal attractive direction are in good agreement with experiment when a relatively low value of permeability is chosen. The forces measured normal to the axis of symmetry when the journal is displaced from that axis, however, are significantly higher than predicted by theory, even with a value of relative permeability larger than 5000. These results indicate a need for further work including nonlinear permeability distributions.

Knight, J. D.↗
NASA NTRS1972

Profiles of emission lines in Be stars.

Study of the broadening functions resulting from a gaseous ring in circular motion around a star according to Kepler's law. When the distribution in the gaseous ring has a circular symmetry in the equatorial plane, the broadening profile is related to the surface density distribution along the radius by an integral equation which can be transformed into the Abel integral equation and solved analytically. Profiles corresponding to gaseous rings with a uniform density distribution but different widths are used to illustrate the general properties of the profile broadened by the gaseous ring in circular motion. The emission profile has also been studied for cases in which the circular motion does not follow Kepler's law.

Huang, S. S.↗
NASA NTRS1994

HST ultraviolet spectropolarimetry of NGC 1068

We present multiaperture spectropolarimetric observations of the Seyfert 2 galaxy NGC 1068. The nuclear region of NGC 1068 was observed with three apertures (4.3 sec x 1.4 sec., 1.0 sec., and 0.3 sec.) by the Hubble Space Telescope (HST). These ultraviolet data allow us to study the scattered, nuclear light without the complication of polarization dilution caused by strong unpolarized starlight. In particular, we can determine the mechanism of the scattering and the size scale of the scattering region. Our data confirm the findings of Antonicci & Miller (1985) and Code et al. (1993). Shortward of 2700 A, the continuum polarization is constant, P is approximately 16%, at a position angle of 97 deg, indicating electron scattering as the mechanism for the polarization. In addition, the narrow-line emission is much less polarized than the continuum, and two broad lines, Mg II lambda lambda 2796, 2804 and C III lambda 1909, are seen in polarized flux Ly-alpha and C IV are not included in our spectral region). The total flux data also indicate that from approximately 2200 A to approximately 3000 A, the spectrum of NGC 1068 is strongly affected by blended Fe II emission. These polarimetry data are explained by the occulation/reflection model proposed by Antonucci & Miller (1985). According to this model, NGC 1068 harbors a Seyfert 1 nucleus which is obscured along the line of sight by an opaque torus. The symmetry axis of the torus is alinged with the radio axis. Radiation from the broad-line region and feature continuum source can escape along the poles of the torus where it is scattered to us. This scattered light receives a partial linear polarization, perpendicular to the symmetry axis of the torus. Our measurements of the relative fluxes and polarized fluxes in the three apertures indicated that the scattering region is spatially extended on a scale of approximatley 1 sec. Also, in the 0.3 sec aperture, and to a lesser extent in the 1.0 sec aperture, the polarization is is somewhat higher, and the position angle somewhat lower, than in largest aperture. Presumably, isolating the central part of the relecting region results in less geometrical cancellation of the polarization and an angle indicative of the location of the innermost scattering paricles.

Antonucci, Robert↗
NASA NTRS2004

Improved Phase-Mask Fabrication of Fiber Bragg Gratings

An improved method of fabrication of Bragg gratings in optical fibers combines the best features of two prior methods: one that involves the use of a phase mask and one that involves interference between the two coherent laser beams. The improved method affords flexibility for tailoring Bragg wavelengths and bandwidths over wide ranges. A Bragg grating in an optical fiber is a periodic longitudinal variation in the index of refraction of the fiber core. The spatial period (Bragg wavelength) is chosen to obtain enhanced reflection of light of a given wavelength that would otherwise propagate relatively unimpeded along the core. Optionally, the spatial period of the index modulation can be made to vary gradually along the grating (such a grating is said to be chirped ) in order to obtain enhanced reflection across a wavelength band, the width of which is determined by the difference between the maximum and minimum Bragg wavelengths. In the present method as in both prior methods, a Bragg grating is formed by exposing an optical fiber to an ultraviolet-light interference field. The Bragg grating coincides with the pattern of exposure of the fiber core to ultraviolet light; in other words, the Bragg grating coincides with the interference fringes. Hence, the problem of tailoring the Bragg wavelength and bandwidth is largely one of tailoring the interference pattern and the placement of the fiber in the interference pattern. In the prior two-beam interferometric method, a single laser beam is split into two beams, which are subsequently recombined to produce an interference pattern at the location of an optical fiber. In the prior phase-mask method, a phase mask is used to diffract a laser beam mainly into two first orders, the interference between which creates the pattern to which an optical fiber is exposed. The prior two-beam interferometric method offers the advantage that the period of the interference pattern can be adjusted to produce gratings over a wide range of Bragg wavelengths, but offers the disadvantage that success depends on precise alignment and high mechanical stability. The prior phase-mask method affords the advantages of compactness of equipment and relative insensitivity to both misalignment and vibration, but does not afford adjustability of the Bragg wavelength. The present method affords both the flexibility of the prior two-beam interferometric method and the compactness and stability of the prior phase-mask method. In this method (see figure), a laser beam propagating along the x axis is normally incident on a phase mask that lies in the (y,z) plane. The phase of light propagating through the mask is modulated with a spatial periodicity, p, along the y axis chosen to diffract the laser light primarily to first order at the angle . (The zero-order laser light propagating along the x axis can be used for alignment and thereafter suppressed during exposure of the fiber.) The diffracted light passes through a concave cylindrical lens, which converts the flat diffracted wave fronts to cylindrical ones, as though the light emanated from a line source. Then two parallel flat mirrors recombine the diffracted beams to form an interference field equivalent to that of two coherent line sources at positions A and B (virtual sources). The interference pattern is a known function of the parameters of the apparatus and of position (x,y) in the interference field. Hence, the tilt, wavelength, and chirp of the Bragg grating can be chosen through suitable adjustments of the apparatus and/or of the position and orientation of the optical fiber. In particular, the Bragg wavelength can be adjusted by moving the fiber along the x axis, and the bandwidth can be modified over a wide range by changing the fiber tilt angle or by moving the phase mask and/or the fiber. Alignment is easy because the zero-order beam defines the x axis. The interference is relatively stable and insensitive to the mechanical vibration because of the gh symmetry and compactness of the apparatus, the fixed positions of the mirrors and lens, and the consequent fixed positions of the two virtual line sources, which are independent of the translations of the phase mask and the laser relative to the lens.

Grant, Joseph↗
NASA NTRS2021

The Double-Drained Drop: Symmetric Draining of Liquids from Containers with Interior Corners

An analytic solution is found for the late stage draining of a wetting capillary liquid from an interior corner. The solution exploits the symmetry of volumetric sink conditions at opposing ends of such a `double-drained' interior corner flow with applications ranging from liquid recovery in microfluidic devices on earth to liquid fuels scavenging in large fuel tanks aboard spacecraft. At long times t, the liquid depth is h~t^n, the liquid volume is V~ t^(2n), and the maximum volumetric liquid removal rate is Q~t^(2n-1), where n =-1. Representative experiments are conducted at larger length scales aboard the International Space Station and at microfluidic length scales in a terrestrial laboratory. Both sets of experiments confirm the solutions. We show that the approach offers a method to predict maximum drain rates from related geometries where a single drain location provides the required symmetry. We also show that the `fixed length' solution is one of many practical similarity solutions to the governing nonlinear evolution equation for the transient liquid profile along the interior corner. Exponential asymptotic Fourier series solutions are also found for partial corner fillling as well as draining.

microgravity↗
NASA NTRS1992

Squeezed states, time-energy uncertainty relation, and Feynman's rest of the universe

Two illustrative examples are given for Feynman's rest of the universe. The first example is the two-mode squeezed state of light where no measurement is taken for one of the modes. The second example is the relativistic quark model where no measurement is possible for the time-like separation fo quarks confined in a hadron. It is possible to illustrate these examples using the covariant oscillator formalism. It is shown that the lack of symmetry between the position-momentum and time-energy uncertainty relations leads to an increase in entropy when the system is different Lorentz frames.

Han, D.↗
NASA NTRS1981

Numerical analysis of turbulent coaxial flow with internal heat generation

A computational method with which to obtain a physical understanding of the turbulent field of two coaxial jets entering an axisymmetric chamber is developed. Even the laminar field of this flow is quite complicated. This is due to the many different domains which exist in the field especially in the entrance region. Physically, three regions may be identified: the wall region, the initial region near the axis of symmetry and the mixing region. Advancing downstream, these regions change relative size with the ratio of the two jets' mass fluxes as the main parameter. The turbulent field of these flows is much more complicated due to the difference in the effective transport coefficients and turbulence level from region to region. However, being aware beforehand of the complications and the different regions of this field, the appropriate turbulence model and numerical scheme can be adjusted to treat the problem.

Lin, A.↗
NASA NTRS1984

On the nature of the baryon asymmetry

Whether the baryon asymmetry in the universe is a locally varying or universally fixed number is examined with focus on the existence of a possible matter antimatter domain structure in the universe arising from a GUT with spontaneous CP symmetry breaking. Theoretical considerations and observational data and astrophysical tests relating to this fundamental question are reviewed.

Stecker, F. W.↗
NASA NTRS1992

Antipodal hotspot pairs on the earth

The results of statistical analyses performed on three published hotspot distributions suggest that significantly more hotspots occur as nearly antipodal pairs than is anticipated from a random distribution, or from their association with geoid highs and divergent plate margins. The observed number of antipodal hotspot pairs depends on the maximum allowable deviation from exact antipodality. At a maximum deviation of not greater than 700 km, 26 to 37 percent of hotspots form antipodal pairs in the published lists examined here, significantly more than would be expected from the general hotspot distribution. Two possible mechanisms that might create such a distribution include: (1) symmetry in the generation of mantle plumes, and (2) melting related to antipodal focusing of seismic energy from large-body impacts.

Rampino, Michael R.↗
NASA NTRS1994

Water tunnel flow visualization study of a 4.4 percent scale X-31 forebody

A water-tunnel test of a 4.4 percent-scale, forebody-only model of the X-31 aircraft with different forebody strakes and nosebooms has been performed in the Flow Visualization Facility at the NASA Dryden Flight Research Center. The focus of the study was to determine the relative effects of the different configurations on the stability and symmetry of the high-angle-of-attack forebody vortex flow field. The clean, noseboom-off configuration resisted the development of asymmetries in the primary vortices through 70 deg angle of attack. The wake of the X-31 flight test noseboom configuration significantly degraded the steadiness of the primary vortex cores and promoted asymmetries. An alternate L-shaped noseboom mounted underneath the forebody had results similar to those seen with the configuration, enabling stable, symmetrical vortices up to 70 deg angle of attack. The addition of strakes near the radome tip along the waterline increased the primary vortex strength while it simultaneously caused the vortex breakdown location co move forward. Forebody strakes did not appear to significantly reduce the asymmetries in the forebody vortex field in the presence of the flight test noseboom.

Cobleigh, Brent R.↗
NASA NTRS2011

Effects of Notch Misalignment and Tip Radius on Displacement Field in V-Notch Rail Shear Test as Determined by Photogrammetry

Evolution of the 3D strain field during ASTM-D-7078 v-notch rail shear tests on 8-ply quasi-isotropic carbon fiber/epoxy laminates was determined by optical photogrammetry using an ARAMIS system. Specimens having non-optimal geometry and minor discrepancies in dimensional tolerances were shown to display non-symmetry and/or stress concentration in the vicinity of the notch relative to a specimen meeting the requirements of the standard, but resulting shear strength and modulus values remained within acceptable bounds of standard deviation. Based on these results, and reported difficulty machining specimens to the required tolerances using available methods, it is suggested that a parametric study combining analytical methods and experiment may provide rationale to increase the tolerances on some specimen dimensions, reducing machining costs, increasing the proportion of acceptable results, and enabling a wider adoption of the test method.

Hill, Charles S.↗
NASA NTRS2011

Thermal Structure of Titan's Troposphere and Middle Atmosphere

The thermal structure of Titan's atmosphere is reviewed, with particular emphasis on recent Cassini-Huygens results. Titan's has a similar troposphere-stratosphere-mesosphere pattern like Earth, but with a much more extended atmosphere, because of the weaker gravity, and also much lower temperatures, because of its greater distance from the sun. Titan's atmosphere exhibits an unusually large range in radiative relaxation times. In the troposphere, these are long compared to seasonal time scales, but in the stratosphere they are much shorter than a season. An exception is near the winter pole, where the stratospheric relaxation times at 100-170 km become comparable to the seasonal time scale; at the warm stratopause, they are comparable to a Titan day. Hence, seasonal behavior in the troposphere should be muted, but significant in the stratosphere. This is reflected in the small meridional contrast observed in temperatures in the troposphere and the large stratospheric contrasts noted above. A surprising feature of the vertical profiles of temperature is the abrupt transition between these regimes in at high northern latitudes in winter, where the temperatures in the lower stratosphere exhibit a sudden drop with increasing altitude. This could be a radiative effect, not associated with spatial variations in gaseous opacity, but rather from an optically thick condensate at thermal-infrared wavelengths. A curious aspect of Titan's middle atmosphere is that the axis of symmetry of the temperature field is tilted by several degrees relative to the rotational axis of the moon itself. Whether this is driven by solar heating or gravitational perturbations is not known. Titan's surface exhibits weak contrasts in temperature, approximately 3 K in the winter hemisphere. At low latitudes, there is evidence of a weak nocturnal boundary layer on the morning terminator, which is not radiatively controlled, but can be explained in terms of vertical mixing with a small eddy viscosity.

Flasar, F. M.↗
NASA NTRSDate not supplied

Mixed-Domain Charge Transport in S-Se Alloys as a Li-S Battery Cathode Material

Lithium-sulfur batteries are emerging candidate systems for the next-generation long-range electric aircraft application owing to their potential to deliver high energy density per weight. Their cathodes are to be made primarily with sulfur, but sulfur by itself has much too low electron conductivity to serve as a useful cathode. An idea that has been suggested to overcome this bottleneck is to alloy sulfur with selenium in the hope that electron mobility, which is thought to improve charge transport at some expense of increased weight and reduced energy density. However, understanding of these alloy structures and their transport mechanism is insufficient, and electron mobility at varying degrees of selenium content is not well charted, which are critical for determining the optimum selenium content and testing whether this strategy is generally feasible. The difficulty of computationally characterizing these alloy systems is rooted in the structure. The structures of both sulfur and selenium exhibit eight-atom rings that pack together in various orientations to form their respective crystals. For one, because these crystals (and presumably their alloys as well) feature multiple polymorphs such that their structural coherence is rather unclear. Secondly, these are also relatively large systems (32 atoms per cell) with low-symmetry, which complicate computation both in terms of accuracy and efficiency. Thirdly, such semi-molecular, semi-crystalline structures lead to a combination of band-transport characteristics and hopping-transport characteristics, each of which is a domain with its own physics and set of computational, theoretical challenges. In addition, there is a general dearth of experimental transport data for sulfur-selenium alloys. In this study, we make a comprehensive attempt to tackle this problem using a wide array of first-principles methods. We generate special quasirandom structures to simulate alloy structures, and compute their first-principles Raman spectra for comparison with experimental data to ensure their structural soundness. We then proceed to use recently developed, state-of-the-art tool (AMSET) in order to efficiently compute electronic mobilities under band transport of pure sulfur, pure selenium, as well as their alloys of various compositions at a reasonable accuracy. We then sample numerous dimer configurations of nearest-neighbor eight-atom-ring-pairs and compute electronic hopping rates between them, which yields hopping mobility. A combination of these efforts lead to a general mapping of electron transport behaviors throughout the alloy range. Preliminary results show that introduction of selenium into sulfur initially damages electron mobility due to disorder but eventually improves it beyond that of pure sulfur with additional selenium content, ultimately peaking at the pure-selenium limit. Band transport dominates for holes in sulfur and electrons in selenium, but in all other cases, hopping transport is dominant. Ongoing efforts include determination of charge concentration and conductivity, as well as performing multiphysics modeling to determine the optimum selenium content for best tradeoff between conductivity and energy density for aircraft range.

Junsoo Park↗
NASA NTRS1989

Distortions in memory for visual displays

Systematic errors in perception and memory present a challenge to theories of perception and memory and to applied psychologists interested in overcoming them as well. A number of systematic errors in memory for maps and graphs are reviewed, and they are accounted for by an analysis of the perceptual processing presumed to occur in comprehension of maps and graphs. Visual stimuli, like verbal stimuli, are organized in comprehension and memory. For visual stimuli, the organization is a consequence of perceptual processing, which is bottom-up or data-driven in its earlier stages, but top-down and affected by conceptual knowledge later on. Segregation of figure from ground is an early process, and figure recognition later; for both, symmetry is a rapidly detected and ecologically valid cue. Once isolated, figures are organized relative to one another and relative to a frame of reference. Both perceptual (e.g., salience) and conceptual factors (e.g., significance) seem likely to affect selection of a reference frame. Consistent with the analysis, subjects perceived and remembered curves in graphs and rivers in maps as more symmetric than they actually were. Symmetry, useful for detecting and recognizing figures, distorts map and graph figures alike. Top-down processes also seem to operate in that calling attention to the symmetry vs. asymmetry of a slightly asymmetric curve yielded memory errors in the direction of the description. Conceptual frame of reference effects were demonstrated in memory for lines embedded in graphs. In earlier work, the orientation of map figures was distorted in memory toward horizontal or vertical. In recent work, graph lines, but not map lines, were remembered as closer to an imaginary 45 deg line than they had been. Reference frames are determined by both perceptual and conceptual factors, leading to selection of the canonical axes as a reference frame in maps, but selection of the imaginary 45 deg as a reference frame in graphs.

Tversky, Barbara↗
NASA NTRS1976

Engineering flowfields and heating rates for highly swept wing leading edges

An engineering flow model is developed (and verified experimentally) which describes the flowfield that arises when a supersonic stream encounters a wedge/cylinder configuration whose angles are such that the flow includes only weak shock waves. A numerical code using the perfect gas relations is used to describe the flow in the plane of symmetry inboard of the shock interaction region. Theoretical surface-pressure and heat-transfer distributions are computed for freestream velocities ranging from 1167 to 7610 m/sec. Nondimensionalization of the heat-transfer rates in terms of local flow parameters produced a correlation of Stanton number as a function of the local Reynolds number, which is independent of the freestream flow conditions and of the surface temperature.

Bertin, J. J.↗
NASA NTRS1977

Vesta - The first pyroxene band from new spectroscopic measurements

Spectral reflectance measurements of asteroid 4 Vesta were obtained using a silicon vidicon spectrometer with a resolution of 2 to 4 thousandths of a micron. A flow chart illustrating the data reduction procedure is given, and the location, absorptivity, and bandwidth of an absorption band detected in the near infrared region are described. The absorption band has been interpreted as due to electronic absorptions in ferrous iron in sixfold coordination in the pyroxene, pigeonite. The heightened spectral resolution obtained from the silicon vidicon imaging system permits determination of the relative calcium content of the pyroxene (10 to 12%). Furthermore, the symmetry of the absorption band implies an absence of olivine, which is commonly associated with pyroxene in terrestrial and meteoritic mineral samples. Support for these conclusions is found in spectral analyses of pyroxene, as well as in spectral reflectance measurements of 4 Vesta obtained by other observers.

Mcfadden, L. A.↗
NASA NTRS2003

[Probing Planck-scale Physics with a Ne-21/He-3 Zeeman Maser]

The Ne-21/He-3 Zeeman maser is a recently developed device which employs co-located ensembles of Ne-21 and He-3 atoms to provide sensitive differential measurements of the noble gas nuclear Zeeman splittings as a function of time, thereby greatly attenuating common-mode systematic effects such as uniform magnetic field variations. The Ne-21 maser will serve as a precision magnetometer to stabilize the system's static magnetic field, while the He-3 maser is used as a sensitive probe for violations of CPT and Lorentz symmetry by searching for small variations in the 3He maser frequency as the spatial orientation of the apparatus changes due to the rotation of the Earth (or placement on a rotating table). In the context of a general extension of the Standard Model of particle physics, the Ne-21/He-3 maser will provide the most sensitive search to date for CPT and Lorentz violation of the neutron: better than 10(exp -32) GeV, an improvement of more than an order of magnitude over past experiments. This exceptional precision will offer a rare opportunity to probe physics at the Planck scale. A future space-based Ne-21/He-3 maser or related device could provide even greater sensitivity to violations of CPT and Lorentz symmetry, and hence to Planck-scale physics, because of isolation from dominant systematic effects associated with ground-based operation, and because of access to different positions in space-time.

Source record↗
NASA NTRS1991

A constitutive relation for the viscous flow of an oriented fiber assembly

A constitutive relation for an equivalent, homogeneous fluid is developed for the anisotropic viscous flow of an oriented assembly of discontinuous fibers suspended in a viscous fluid. The anisotropic viscous compliance matrix can be expressed in terms of three constants by assuming the equivalent fluid to be incompressible and the microstructure to have axial symmetry (transversely isotropic). By means of a micromechanics analysis, the three terms of the constitutive relation are expressed in terms of the viscosity of the matrix fluid, the fiber aspect ratio, and the fiber volume fraction. A comparison of the viscosity terms reveals that the elongational viscosity in the fiber direction varies as the square of the fiber aspect ratio and a complex function of the fiber volume fraction. Furthermore, the ratio of the axial elongational viscosity to the transverse elongational viscosity and both axial and transverse shear viscosities was shown to be 10 exp 4 - 10 exp 6 for fiber aspect ratio of 100-1000, except at extreme values of the fiber volume fraction.

Pipes, R. B.↗