Search NASA⌕ Search

SEARCH · Search NASA

Results for “TCs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High Temperature Irradiation-Resistant Thermocouple Qualification (Test Results Report)

This is a qualification report for the high-temperature irradiation-resistant thermocouple (HTIR-TC) developed by Nuclear Energy Enabling Technologies Advanced Sensors and Instrumentation program. Utilizing the Advanced Gas Reactor (AGR) 5/6/7 test conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory, the HTIR-TCs measured temperatures upwards of 1500°C during accident conditions. The HTIR TCs are thus qualified to perform and withstand an 18-month refueling cycle typical of nuclear power plants at the normal operating temperature, with a drift of less than ±1%. The HTIR-TC is also qualified for incorporating into a test fixture during new fuels tests.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

High-temperature irradiation-resistant thermocouple instability model for in-pile reactor use

This article presents an instability model for the high-temperature irradiation-resistant thermocouple (HTIR-TC). Here the term instability defines the superposition of both drift and inhomogeneity of TC thermoelements occurring simultaneously. The HTIR-TC is an advanced thermocouple (TC) that uses the refractory metals niobium and molybdenum as sensing thermoelements for generating electromotive force (EMF) in a field of neutrons and at temperatures upward of 1,600°C. In the Advanced Gas Reactor (AGR) 5/6/7 tests conducted at Idaho National Laboratory’s Advanced Test Reactor (ATR), the HTIR-TCs showed low to moderate instability throughout the life of the test. The instability model reveals that HTIR-TCs can, when the operating temperature of the reactor fuel is normal, maintain performance throughout an 18-month refueling cycle typical of nuclear power plants, reflecting an instability of less than ±1%. The HTIR-TC is also qualified for incorporation into a test fixture during the testing of new fuels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Electron Scattering from 1-Methyl-5-Nitroimidazole: Cross-Sections for Modeling Electron Transport through Potential Radiosensitizers

In this study, we present a complete set of electron scattering cross-sections from 1-Methyl-5-Nitroimidazole (1M5NI) molecules for impact energies ranging from 0.1 to 1000 eV. This information is relevant to evaluate the potential role of 1M5NI as a molecular radiosensitizers. The total electron scattering cross-sections (TCS) that we previously measured with a magnetically confined electron transmission apparatus were considered as the reference values for the present analysis. Elastic scattering cross-sections were calculated by means of two different schemes: The Schwinger multichannel (SMC) method for the lower energies (below 15 eV) and the independent atom model-based screening-corrected additivity rule with interferences (IAM-SCARI) for higher energies (above 15 eV). The latter was also applied to calculate the total ionization cross-sections, which were complemented with experimental values of the induced cationic fragmentation by electron impact. Double differential ionization cross-sections were measured with a reaction microscope multi-particle coincidence spectrometer. Using a momentum imaging spectrometer, direct measurements of the anion fragment yields and kinetic energies by the dissociative electron attachment are also presented. Cross-sections for the other inelastic channels were derived with a self-consistent procedure by sampling their values at a given energy to ensure that the sum of the cross-sections of all the scattering processes available at that energy coincides with the corresponding TCS. This cross-section data set is ready to be used for modelling electron-induced radiation damage at the molecular level to biologically relevant media containing 1M5NI as a potential radiosensitizer. Nonetheless, a proper evaluation of its radiosensitizing effects would require further radiobiological experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Time–Concentration Superposition for Linear Viscoelasticity of Polymer Solutions

The concentration dependence of linear viscoelastic properties of polymer solutions is a well-studied topic in polymer physics. Dynamic scaling theories allow qualitative predictions of polymer solution rheology, but quantitative predictions are still limited to model polymers. Meanwhile, the scaling properties of non-model polymer solutions must be determined experimentally. In present paper, the time–concentration superposition (TCS) of experimental data is shown to be a robust procedure for studying the concentration scaling properties of binary and ternary polymer solutions. TCS can not only identify whether power law scaling may exist or not, and over which concentration range, but also unambiguously estimate the concentration scaling exponents of linear viscoelastic properties for a range of non-model polymer solutions.

42 ENGINEERING↗
DOE OSTI2024

DCMIP2016: the tropical cyclone test case

This paper describes and analyzes the Reed–Jablonowski (RJ) tropical cyclone (TC) test case used in the 2016 Dynamical Core Model Intercomparison Project (DCMIP2016). This intermediate-complexity test case analyzes the evolution of a weak vortex into a TC in an idealized tropical environment. Reference solutions from nine general circulation models (GCMs) with identical simplified physics parameterization packages that participated in DCMIP2016 are analyzed in this study at 50 km horizontal grid spacing, with five of these models also providing solutions at 25 km grid spacing. Evolution of minimum surface pressure (MSP) and maximum 1 km azimuthally averaged wind speed (MWS), the wind–pressure relationship, radial profiles of wind speed and surface pressure, and wind composites are presented for all participating GCMs at both horizontal grid spacings. While all TCs undergo a similar evolution process, some reach significantly higher intensities than others, ultimately impacting their horizontal and vertical structures. TCs simulated at 25 km grid spacings retain these differences but reach higher intensities and are more compact than their 50 km counterparts. These results indicate that dynamical core choice is an essential factor in GCM development, and future work should be conducted to explore how specific differences within the dynamical core affect TC behavior in GCMs.

Willson, Justin L.↗
DOE OSTI2025

Disentangling atmospheric, hydrological, and coupling uncertainties in compound flood modeling within a coupled Earth system model

Compound riverine and coastal flooding is usually driven by complex interactions among meteorological, hydrological, and ocean extremes. However, existing efforts to model this phenomenon often do not integrate hydrological processes across atmosphere–land–river–ocean systems, leading to substantial uncertainties that have not been fully examined. To bridge this gap, we leverage the new capabilities of the Energy Exascale Earth System Model (E3SM) that enable a multi-component framework that integrates coastally refined atmospheric, terrestrial, and oceanic components. We evaluate compound uncertainties arising from two-way land–river–ocean coupling in E3SM and track the cascading meteorological and hydrological uncertainties through ensemble simulations over the Delaware River basin and estuary during Hurricane Irene (2011). Our findings highlight the importance of two-way river–ocean coupling to compound flood modeling and demonstrate E3SM's capability in capturing compound flood extent near the coast, with a hit rate over 0.75. Our study shows the growing uncertainties that transition from atmospheric forcings to flood distribution and severity. Furthermore, an analysis based on artificial neural networks is used to assess the roles of hydrological drivers, such as infiltration and soil moisture, in the generation of compound flooding. The response of compound floods to tropical cyclones (TCs) is found to be susceptible to these often overlooked drivers. For instance, the flooded area could increase more than 2-fold (∼2.4) if Hurricane Irene were preceded by an extreme antecedent soil moisture condition (AMC). The results not only support the use of a multi-component framework for interactive flooding processes, but also underscore the necessity of broader definitions of compound flooding that encompass the simultaneous occurrence of intense precipitation, storm surge, and high AMC during TCs.

Feng, Dongyu [Pacific Northwest National Laborator↗
DOE OSTI2024

Future North Atlantic tropical cyclone intensities in thermodynamically modified historical environments

Tropical cyclones (TCs) rank as the deadliest and most financially crippling natural disasters in the United States for the last half-century. It is imperative to assess potential shifts in TC intensity within the paradigm of an evolving climate. In this study, we have modeled the intensities of 620 historical TC events in the North Atlantic Basin using the Risk Analysis Framework for Tropical Cyclones (RAFT)'s deep learning intensity model. By applying a thermodynamic warming signal extrapolated from Global Climate Models, we rerun historical events under eight different future climate scenarios, providing a spectrum of potential TC intensity outcomes. One of the future simulations indicates a staggering 43% increase in the number of major hurricanes, underscoring the critical impact of climate change on TC intensity. Additionally, an interactive dashboard has been created to enable users to explore individual storm simulations and understand the influence of future climate signals on environmental conditions of TC development and resulting TC intensities. This dataset and the user-friendly tool offer invaluable resources for systematic exploration of the discrete effects that changes in the air-sea thermodynamic state have on the intensities of TCs.

Climate Change↗
DOE OSTI2023

AGR-5/6/7 Thermal Model with Non-uniform Gas Gaps

Fuel compact temperatures are a crucial factor in assessing irradiation performance of the Tristructural isotropic fuel particles. In the absence of direct measurement, fuel compact temperatures were calculated using a three-dimensional finite element thermal model, which is subject to simulation uncertainty. The most dominant factor in uncertainty of calculated fuel temperature is the gas gap uncertainty due to the nub-to-shell clearance because of fabrication error. A revision to the thermal model was made to examine the most probable offset position for four different dates of interest. The offset position options varied in magnitude and azimuthal direction of offset of the holder top and bottom position. The best-fit offset of the holder is estimated based on the minimum root mean square error of residuals for all operational thermocouples (TCs). From these results, the following conclusions were made: 1) During earlier cycles (162A – 164A) when numerous TCs were still operational, the best-fit offset distance varied in range [0.002 – 0.0035 in.] for both the top and bottom holder while offset azimuthal direction varied widely, especially for the holder bottom. 2) Holder offset led to slightly lower Capsule 1 average temperature, but wider temperature variation (lower minimum and higher peak fuel temperatures). 3) The maximum offset of 0.006 in. to the northwest direction for both the top and bottom holder yielded a much higher temperature than the original peak fuel temperature, which increased from 1422 to 1557 ? (or 135 ? increase). This could be one of the reasons for massive particle failure near the end of Cycle 165A. 4) Even though, the highest temperature at the TC-1-7 tip reached slightly higher than 1000?, the temperature along the TC wire reached as high as 1335? assuming a holder offset of 0.006 in. to the northwest. Consequently, at this temperature nickel from this TC wire could cause particle failures in Capsule 1.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

AGR-5/6/7 Capsule 1 Temperature Re-analysis_Grant Hawkes_Final

Slides for Gas-Cooled Reactor AGR-5/6/7 Thermal Model with Non-Uniform Gas Gaps. Includes investigation of offset through modeling and experimental results, ABAQUS finite element model created for the entire test train, Capsule 1 information, Three irradiation dates to compare the thermal model with the working thermocouples (TCs), Offset distances and direction of offset for the top and bottom of the graphite holder with computer runs, determination of offset by the root mean square error (RMSE) between the TCs and model predtictions, and the results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

HDG-1 Experiment Irradiation Monitoring Data Qualification Final Report

SUMMARY The U.S. Department of Energy (DOE) Advanced Reactor Technologies (ART) Graphite Research and Development (GRD) Program is conducting a series of six experiments to quantify the effects of irradiation on nuclear-grade graphite. This report documents the qualification of irradiation monitoring data for the fifth experiment, High Dose Graphite-1 (HDG-1). Qualified monitoring data are required by the ART program to support the design and licensing of the first high-temperature reactor (HTR) nuclear plant. Data are classified as Qualified if they meet the usage requirements described in the experiment planning and quality assurance (QA) documents, Failed if they do not meet those requirements and provide no usable information, or Trend if they do not fully meet all requirements but still provide useful information subject to an assessment of how any deficiencies may affect a particular use of the data. HDG-1 irradiation began with Advanced Test Reactor (ATR) Cycle 168B on August 24, 2020, and concluded after Cycle 173C on January 27, 2025. The HDG-1 capsule was removed from the reactor core twice—during core internal change (CIC) Cycle 170A and powered axial locator mechanism (PALM) Cycle 172A—to prevent overheating of the graphite specimens during high-power PALM cycles. The capsule was therefore irradiated during a total of seven normal ATR cycles: 168B, 169A, 171A, 171B, 173A, 173B, and 173C. Irradiation monitoring data evaluated in this report include thermocouple (TC) temperature, gas flow rate, gas moisture, gas pressure, specimen load, and graphite stack displacement. Temperature. A total of 14,508,065 TC temperature records were captured. Of these, 13,901,785 (95.8%) are Qualified and 606,280 (4.2%) are Failed. The principal source of failed temperature data was the instrument failure of TC-9 (Zone 2) on June 24, 2024, and TC-10 (Zone 1) on July 5, 2024, near the end of Cycle 173A, which resulted in 595,554 Failed readings. An additional 379 missing values and 10,347 slightly negative values from TC-13 during ATR outages are also Failed. Neither TC-9 nor TC-10 was used as a temperature-control TC, and their failures did not compromise capsule condition monitoring. Correlation analysis of all 13 TCs found no evidence of virtual junction formation. Control chart analysis revealed clear downward drift of approximately 80°C for TC-6 (Zone 3) relative to other stable TCs, and possible downward drift of approximately 60°C for TC-13 relative to the Zone 5 control TC (TC-1), though TC-13 remained consistent with the Zone 2 control TC (TC-12). Gas flow. A total of 20,088,090 gas flow rate records were captured. Of these, 19,941,463 (99.3%) are Qualified and 146,627 (0.7%) are Failed due to missing values. All argon, helium, and total gas flow data were within expected ranges throughout the irradiation. Gas moisture. A total of 1,116,005 outlet gas moisture values were captured. Of these, 1,101,421 (98.7%) are Qualified and 14,584 (1.3%) are Failed, comprising 14,556 out-of-range values and 28 missing values. The out-of-range moisture values exceeded 22,000 ppmv for approximately 1 week at the beginning of Cycle 173A, when accumulated moisture evaporated after the capsule was retrieved from water storage during PALM Cycle 172A and reinserted into the east flux trap. Moisture levels returned to below 25 ppmv for the remaining three cycles, and the transient high-moisture event did not affect the integrity of specimen irradiation. Gas pressure. A total of 7,812,035 gas pressure values were captured. Of these, 6,642,048 (85.0%) are Qualified and 1,169,987 (15.0%) outlet pressure values are Failed, comprising 718,537 zero outlet pressure values due to sensor failure from Cycle 168B through Cycle 171B, 54,550 missing values, and 396,900 too-low outlet pressure values, ranging from 1.1 to 1.6 psia after sensor replacement during Cycle 173A. Load. A total of 6,696,030 load values were captured. Of these, 6,694,580 (99.98%) are Qualified and 1,450 (0.02%) are Failed due to missing values. Applied loads to the six specimen stacks were stable throughout the irradiation. Stack displacement. A total of 6,696,030 displacement values were captured. Of these, 5,713,297 (85.32%) are Qualified and 3,781 (0.06%) are Failed due to missing values. Stack displacement increased consistently throughout the irradiation, reaching approximately 3.08 in. for Channels 5 and 6 by the end of irradiation. 978,952 (14.62%) substantially elevated displacements observed for Channel 6 beginning in Cycle 171A and for Channel 5 beginning in Cycle 173A are assigned Trend status. Raising pressure. A total of 1,115,999 raising pressure values were captured. Of these, 1,115,430 (99.95%) are Qualified and 569 (0.05%) are Failed due to missing values. Ram pressure. A total of 6,696,030 ram pressure values were captured. Of these, 6,692,249 (99.95%) are Qualified and 3,484 (0.05%) are Failed due to missing values. Stack raising was perf

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Low and moderate x gluon contribution to exclusive Compton scattering processes

We revisit the high energy semi-classical description of the exclusive processes DVCS, TCS, and Double DVCS by explicitly keeping track of the Feynman x dependence in both the hard and the hadronic matrix elements. This is achieved by a modification of the standard shock wave approximation to derive the effective Feynman rules, which leads to a generic expression on which we then perform a partial twist expansion to get rid of quantities suppressed by the proper physical scales. We obtain a compact factorized master formula that can be used to investigate the Bjorken limit at leading twist. In particular, we recover the full one-loop result in the collinear limit for pure gluon exchange with the target. Finally, we discuss the subtleties in taking the simultaneous collinear and small x limit.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

A new method for predicting hurricane rapid intensification based on co-occurring environmental parameters

Abstract Tropical cyclones (TCs) that undergo Rapid Intensification (RI) can pose serious socioeconomic threats and can potentially result in major damaging impacts along coastal areas. Considering the complexity of various physical mechanisms that play a role in RI and its relatively low probability of occurrence, predicting RI remains a major operational challenge. In this study, we propose a simple deterministic binary classification model based on the co-occurrence of environmental parameters (MCE) to predict an RI event. More specifically, the model determines the possibility of RI based on a simple count of the number of environmental predictors deemed favorable and unfavorable. We compare our model results to logistic regression (LR) and decision tree (DT) models, well-trained using the same set of environmental predictors. Results reveal that at an RI threshold of 30 kt, the MCE exhibits a critical success index score of 0.233 which is 14% higher than DT and LR model performances. When tested at multiple RI thresholds, the MCE displays relatively higher skill scores across multiple metrics. By simultaneously evaluating the favorability of predictors, the MCE is able to comparatively reduce the number of false alarms predicted when certain predictors are unfavorable toward RI. Interpreting these model results to gain a physical understanding of how co-occurring environmental parameters can affect RI, we highlight future directions for using models based on the MCE approach to understand and predict TC RI as well as other meteorological extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Low embodied energy and carbon, high lifetime silicon boules via a combined chemical vapor deposition/float zone process

This work evaluates a new process route to making float zone (Fz)-quality silicon wafers using a combination of computational fluid dynamics (CFD) modeling and technoeconomic analysis. Our analysis finds that the new process competes with Czochralski (Cz)-grown wafers on a levelized cost of energy system level. The new process also decreases embodied energy and carbon of silicon photovoltaics (PV) by ~6x circumventing the energy-costly Siemens process used in polycrystalline silicon (poly-Si) production plants to generate feedstock for Fz and Cz boules. Instead of using poly-Si from the Siemens process to feed crystallization, the new process uses the high-purity, trichlorosilane (TCS) precursor gas to grow a poly-Si feed rod in-situ during a modified Fz1,2 boule growth process. The gas-to-boule float zone process enables opportunity to produce high-purity (low metals and oxygen content), uniformly doped single crystal silicon boules and wafers with high bulk lifetimes (τ bulk > 15 ms) to enable higher efficiency cells (>27 %) with fewer known degradation mechanisms than Czochralski (Cz)-grown wafers. These benefits reduce the levelized cost of electricity (LCOE) of PV-produced electricity. Here we show the results of our CFD and chemical modeling of the process to prove feasibility and economic viability.

14 SOLAR ENERGY↗
DOE OSTI2021

An assessment of tropical cyclones in North American $\mathrm{CORDEX}$ $\mathrm{WRF}$ simulations

This work presents an assessment of tropical cyclones (TCs) in the 25 km and 50 km resolution reanalysis-forced and baseline and future (RCP8.5) global climate model (GCM) forced simulations produced for the North American branch of the international Coordinated Regional climate Downscaling Experiment (NA-CORDEX) using the Weather Research and Forecasting (WRF) model. A set of complementary 12 km resolution simulations produced as a part of a different project is also included in this assessment. Before examining the projections from the GCM-driven simulations, the ability of the simulations to minimally produce a realistic spatial distribution of historical TC occurrence was assessed in simulations forced by reanalysis and the three different GCMs used herein. Then, projections for occurrence, TC related mean precipitation and precipitation intensity, storm duration, the intensity measured by minimum pressure and maximum wind speed, storm size, and translation speed were examined. Several of these characteristics show little to no change in the future in trend or in distribution across the ensemble. However, many simulations suggest a westward shift or increase in TC occurrence over the East Pacific basin and a decrease in occurrence over the Caribbean and Gulf of Mexico. Increases (decreases) in total storm-related precipitation are projected where TC occurrence increases (decreases). TC precipitation intensity is found to increase in all simulations over the East Pacific, but projections are mixed over the North Atlantic. Finally, the ensemble projects a distribution shift towards more intense TC over the East Pacific, and a shift toward faster translation speeds over the North Atlantic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A Satellite-Derived Upper-Ocean Stratification Data Set for the Tropical North Atlantic With Potential Applications for Hurricane Intensity Prediction

Upper-ocean stratification strongly impacts vertical mixing and the heat flux between the ocean and atmosphere, especially under extreme conditions of tropical cyclones (TCs). Knowledge of prestorm stratification is important for accurate TC intensity prediction. In situ observations of the tropical ocean have significantly increased in the past decade. However, they are still too sparse to resolve ocean stratification variability in near-real time and on small spatial scales. Here, in this study, based on long-term observations and an ocean reanalysis data set from 2004–2017, we investigate the possibility of retrieving upper-ocean stratification from sea surface temperature (SST), sea surface salinity (SSS), and sea surface height (SSH) using a simple regression method. It is found that more than 90% of the mean seasonal cycle and about 30% to 80% of temperature and salinity stratification anomalies can be reconstructed using surface data from either observations or an ocean reanalysis. Simple regression can be used with satellite observations to create a high-resolution, near-real-time-gridded ocean stratification data set that successfully reproduces both the large and mesoscale variability of ocean stratification. When used in a simple expression for TC-induced SST cooling, the satellite-derived stratification shows improvements over an ocean analysis in terms of variance explained of SST cooling, offering promise as a near-real-time indicator of the ocean's impact on TC intensification.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The Influence of Ocean Coupling on Simulated and Projected Tropical Cyclone Precipitation in the HighResMIP–PRIMAVERA Simulations

This study aims to quantify the impacts of atmosphere–ocean coupling on simulated and projected tropical cyclone (TC) precipitation globally. We used global climate model (GCM) simulations over 1950–2050 from the High Resolution Model Intercomparison Project (HighResMIP) and compared its fully coupled atmosphere–ocean GCMs (AOGCMs) with atmosphere-only GCMs (AGCMs). We find that ocean coupling generally leads to decreased TC precipitation over ocean and land. Large-scale sea surface temperature (SST) biases are critical drivers of the precipitation difference, with secondary contributions from local TC–ocean feedbacks via SST cold wakes. The two driving factors, attributed to ocean coupling in the AOGCMs, influence TC precipitation in association with decreased TC intensity and specific humidity. The AOGCMs and AGCMs consistently project TC precipitation increases in 2015–2050 relative to 1950–2014 over ocean for all basins, and for landfalling TCs in the North Atlantic and western North Pacific.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Drivers of Phytoplankton Variability in and Near the Pearl River Estuary, South China Sea During Typhoon Hato (2017): A Numerical Study

The Pearl River estuary-coastal system in the Northern South China Sea is frequently affected by tropical cyclones (TCs) every year. Previous in-situ and remote sensing studies have found typhoons can enhance phytoplankton biomass and induce blooms in this region. However, the mechanistic links between phytoplankton blooms and typhoons have not been well elucidated due to the interplay of multiple processes along the land-ocean-atmosphere interfaces. Unravelling these interactions will have to rely on an integrated modelling system. In this work, we constructed a realistic, 3-dimensional, land-ocean-atmosphere modelling system with the marine ecosystem and sediment components for the China Great Bay Area. By using the integrated modelling system, we quantitatively investigated phytoplankton response to hydrological conditions variations under Typhoon Hato (2017), a strong typhoon case. Passive tracer experiments showed that with high river discharge induced by heavy rainfall, the residence time of Lingding Bay is as short as 15-day, less than half of that under the climatological discharge. The increase in freshwater pulse washed out the phytoplankton biomass within Lingding Bay. While for the offshore region, the source and sink terms analysis showed that the increase of phytoplankton biomass in the first week was because of the uplift of nutrient-rich subsurface water, while in the second week was because of the seaward propagated nearshore high phytoplankton biomass water. While riverine nutrients support phytoplankton growth in the third week, a large part of phytoplankton biomass was lost to zooplankton grazing, showing the system shifted from the bottom-up control to the top-down control.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

An Energetic Diagnostic of Tropical Cyclone Size in f –Plane Simulations

As a major feature of tropical cyclones (TCs), controlling factors of TC outer size or size scaling remains a fundamental scientific question. The Rossby deformation radius and a natural extent associated with potential intensity have been proposed as two scalings of TC size. But neither of them satisfactorily captures the sensitivity of TC size to sea surface temperature (SST) in idealized f-plane simulations. Inspired by the studies of the Hadley circulation, here we proposed a new TC scaling based on an energetic diagnostic scaling. TC size is primarily a ratio of the secondary circulation strength to subsidence velocity, further determined by the total atmospheric heating in the ascending area, the gross moist stability, the diabatic cooling, and the dry static stability. The former two is based on the moist energetic budget applied to the whole storm structure, while the latter two is based on the dry thermodynamic budget applied to the subsidence areas. The new scaling well captured the sensitivity of TC size to SST in idealized f-plane simulations, partly resulted from expanded ascending area, increased surface moisture deficit, and weakened subsidence with increased SST.

58 GEOSCIENCES↗