Search NASA⌕ Search

SEARCH · Search NASA

Results for “THEORIES - SIMILITUDE - KARMAN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Studies of a flat wake rotor theory

A computer code was developed at Princeton University to calculate the velocity components in the flow field near a lifting rotor. The induced velocity components in the rotor flow field predicted by this theory are compared with experiment. It appears that on balance, this relatively simple theory gives a reasonable prediction of the average induced velocities in a rotor flow and is quite suitable for such applications as estimating the influence of the rotor wake on the tail surfaces of rotorcraft. The theory predicts that significant induced velocity components are present in all three flow directions in the wake at a lifting rotor. It should be noted , however, that there are a few experimental measurements of the longitudinal and lateral induced velocity components in the rotor wake. This theory, known as the flat wake theory, is essentially the rotary wing analog of Prandtl's lifting line theory. The theory is described in this report. Calculations based on the theory are presented and compared with a modern free wake theory.

Curtiss, H. C., Jr.↗
NASA NTRS1994

A Semantic Theory of Abstractions: A Preliminary Report

In this paper we present a semantic theory of abstractions based on viewing abstractions as interpretations between theories. This theory captures important aspects of abstractions not captured in the theory of abstractions presented by Giunchiglia and Walsh. Instead of viewing abstractions as syntactic mappings, we view abstractions as a two step process: the intended domain model is first abstracted and then a set of (abstract) formulas is constructed to capture the abstracted domain model. Viewing and justifying abstractions as model level transformations is both natural and insightful. We provide a precise characterization of the abstract theory that exactly implements the intended abstraction, and show that this theory, while being axiomatizable, is not always finitely axiomatizable. A simple corollary of the latter result disproves a conjecture made by Tenenberg that if a theory is finitely axiomatizable, then predicate abstraction of that theory leads to a finitely axiomatizable theory.

Nayak, P. Pandurang↗
NASA NTRS2009

Refined Zigzag Theory for Laminated Composite and Sandwich Plates

A refined zigzag theory is presented for laminated-composite and sandwich plates that includes the kinematics of first-order shear deformation theory as its baseline. The theory is variationally consistent and is derived from the virtual work principle. Novel piecewise-linear zigzag functions that provide a more realistic representation of the deformation states of transverse-shear-flexible plates than other similar theories are used. The formulation does not enforce full continuity of the transverse shear stresses across the plate s thickness, yet is robust. Transverse-shear correction factors are not required to yield accurate results. The theory is devoid of the shortcomings inherent in the previous zigzag theories including shear-force inconsistency and difficulties in simulating clamped boundary conditions, which have greatly limited the accuracy of these theories. This new theory requires only C(sup 0)-continuous kinematic approximations and is perfectly suited for developing computationally efficient finite elements. The theory should be useful for obtaining relatively efficient, accurate estimates of structural response needed to design high-performance load-bearing aerospace structures.

Tessler, Alexander↗
NASA NTRS1982

Nonlinear constitutive theory for turbine engine structural analysis

A number of viscoplastic constitutive theories and a conventional constitutive theory are evaluated and compared in their ability to predict nonlinear stress-strain behavior in gas turbine engine components at elevated temperatures. Specific application of these theories is directed towards the structural analysis of combustor liners undergoing transient, cyclic, thermomechanical load histories. The combustor liner material considered in this study is Hastelloy X. The material constants for each of the theories (as a function of temperature) are obtained from existing, published experimental data. The viscoplastic theories and a conventional theory are incorporated into a general purpose, nonlinear, finite element computer program. Several numerical examples of combustor liner structural analysis using these theories are given to demonstrate their capabilities. Based on the numerical stress-strain results, the theories are evaluated and compared.

Thompson, R. L.↗
NASA NTRS1984

Magnetohydrodynamic and gasdynamic theories for planetary bow waves

The observed properties of bow waves and the associated plasma flows are outlined, along with those features identified that can be described by a continuum magnetohydrodynamic flow theory as opposed to a more detailed multicomponent particle and field plasma theory. The primary objectives are to provide an account of the fundamental concepts and current status of the magnetohydrodynamic and gas dynamic theories for solar wind flow past planetary bodies. This includes a critical examination of: (1) the fundamental assumptions of the theories; (2) the various simplifying approximations introduced to obtain tractable mathematical problems; (3) the limitations they impose on the results; and (4) the relationship between the results of the simpler gas dynamic-frozen field theory and the more accurate but less completely worked out magnetohydrodynamic theory. Representative results of the various theories are presented and compared. A number of deficiencies, ambiguities, and suggestions for improvements are discussed, and several significant extensions of the theory required to provide comparable results for all planets, their satellites, and comets are noted.

Spreiter, J. R.↗
NASA NTRS1989

On the relationship between matched filter theory as applied to gust loads and phased design loads analysis

A theoretical basis and example calculations are given that demonstrate the relationship between the Matched Filter Theory approach to the calculation of time-correlated gust loads and Phased Design Load Analysis in common use in the aerospace industry. The relationship depends upon the duality between Matched Filter Theory and Random Process Theory and upon the fact that Random Process Theory is used in Phased Design Loads Analysis in determining an equiprobable loads design ellipse. Extensive background information describing the relevant points of Phased Design Loads Analysis, calculating time-correlated gust loads with Matched Filter Theory, and the duality between Matched Filter Theory and Random Process Theory is given. It is then shown that the time histories of two time-correlated gust load responses, determined using the Matched Filter Theory approach, can be plotted as parametric functions of time and that the resulting plot, when superposed upon the design ellipse corresponding to the two loads, is tangent to the ellipse. The question is raised of whether or not it is possible for a parametric load plot to extend outside the associated design ellipse. If it is possible, then the use of the equiprobable loads design ellipse will not be a conservative design practice in some circumstances.

Zeiler, Thomas A.↗
NASA NTRS1993

A theory for the fracture of thin plates subjected to bending and twisting moments

Stress fields near the tip of a through crack in an elastic plate under bending and twisting moments are reviewed assuming both Kirchhoff and Reissner plate theories. The crack tip displacement and rotation fields based on the Reissner theory are calculated. These results are used to calculate the J-integral (energy release rate) for both Kirchhoff and Reissner plate theories. Invoking Simmonds and Duva's (1981) result that the value of the J-integral based on either theory is the same for thin plates, a universal relationship between the Kirchhoff theory stress intensity factors and the Reissner theory stress intensity factors is obtained for thin plates. Calculation of Kirchhoff theory stress intensity factors from finite elements based on energy release rate is illustrated. It is proposed that, for thin plates, fracture toughness and crack growth rates be correlated with the Kirchhoff theory stress intensity factors.

Hui, C. Y.↗
NASA NTRS1996

Origins of life: a comparison of theories and application to Mars

The field of study that deals with the origins of life does not have a consensus for a theory of life's origin. An analysis of the range of theories offered shows that they share some common features that may be reliable predictors when considering the possible origins of life on another planet. The fundamental datum dealing with the origins of life is that life appeared early in the history of the Earth, probably before 3.5 Ga and possibly before 3.8 Ga. What might be called the standard theory (the Oparin-Haldane theory) posits the production of organic molecules on the early Earth followed by chemical reactions that produced increased organic complexity leading eventually to organic life capable of reproduction, mutation, and selection using organic material as nutrients. A distinct class of other theories (panspermia theories) suggests that life was carried to Earth from elsewhere--these theories receive some support from recent work on planetary impact processes. Other alternatives to the standard model suggest that life arose as an inorganic (clay) form and/or that the initial energy source was not organic material but chemical energy or sunlight. We find that the entire range of current theories suggests that liquid water is the quintessential environmental criterion for both the origin and sustenance of life. It is therefore of interest that during the time that life appeared on Earth we have evidence for liquid water present on the surface of Mars.

Review, Academic↗
NASA NTRS2005

Advanced Small Perturbation Potential Flow Theory for Unsteady Aerodynamic and Aeroelastic Analyses

An advanced small perturbation (ASP) potential flow theory has been developed to improve upon the classical transonic small perturbation (TSP) theories that have been used in various computer codes. These computer codes are typically used for unsteady aerodynamic and aeroelastic analyses in the nonlinear transonic flight regime. The codes exploit the simplicity of stationary Cartesian meshes with the movement or deformation of the configuration under consideration incorporated into the solution algorithm through a planar surface boundary condition. The new ASP theory was developed methodically by first determining the essential elements required to produce full-potential-like solutions with a small perturbation approach on the requisite Cartesian grid. This level of accuracy required a higher-order streamwise mass flux and a mass conserving surface boundary condition. The ASP theory was further developed by determining the essential elements required to produce results that agreed well with Euler solutions. This level of accuracy required mass conserving entropy and vorticity effects, and second-order terms in the trailing wake boundary condition. Finally, an integral boundary layer procedure, applicable to both attached and shock-induced separated flows, was incorporated for viscous effects. The resulting ASP potential flow theory, including entropy, vorticity, and viscous effects, is shown to be mathematically more appropriate and computationally more accurate than the classical TSP theories. The formulaic details of the ASP theory are described fully and the improvements are demonstrated through careful comparisons with accepted alternative results and experimental data. The new theory has been used as the basis for a new computer code called ASP3D (Advanced Small Perturbation - 3D), which also is briefly described with representative results.

Batina, John T.↗
NASA NTRS2022

Advancing Theory and Modeling Efforts in Heliophysics

Heliophysics theory and modeling build understanding from fundamental principles to motivate, interpret, and predict observations. Together with observational analysis, they constitute a comprehensive scientific program in heliophysics. As observations and data analysis become increasingly detailed, it is critical that theory and modeling develop more quantitative predictions and iterate with observations. Advanced theory and modeling can inspire and greatly improve the design of new instruments and increase their chance of success. In addition, in order to build physics based space weather forecast models, it is important to keep developing and testing new theories, and maintaining constant communications with theory and modeling. Maintaining a sustainable effort in theory and modeling is critically important to heliophysics. We recommend that all funding agencies join forces and consider expanding current and creating new theory and modeling programs–especially, 1. NASA should restore the HTMS program to its original support level to meet the critical needs of heliophysics science; 2. a Strategic Research Model program needs to be created to support model development for next-generation basic research codes; 3. new programs must be created for addressing mission-critical theory and modeling needs; and 4. enhanced programs are urgently required for training the next generation of theorists and modelers.

Fan Guo↗
NASA NTRS1996

The Orbital Motion of the Martian Satellites: An Application of Artificial Satellite Theory

This paper describes our extended Sinclair-Morley analytical theory for the Martian Satellites. The theory's foundation is the artificial satellite theory of Brouwer. In the paper, we outline the original theory, present our modifications and additional terms, and compare the theory with numerical integration. We also provide a comparison with one of the competing dynamical Martian satellite theories, namely the ESAPHO/ESADE theory of Chapornt-Touzé.

Sinclair-Morley↗
NASA NTRS1975

Gravitational theories with nonzero divergence of the energy-momentum tensor

Assuming that the divergence of the energy-momentum tensor is nonzero leads to a class of theories with consistent field equations and gauge conditions as well as compatibility with the Newtonian limit of the conservation laws. Both the Einstein and the Brans-Dicke theories are used as models, but the extension to other viable theories such as vector-metric and two-metric theories is possible. One particularly interesting theory emerges that agrees with the ordinary Brans-Dicke theory except for the post-Newtonian parameter zeta sub 2, which predicts nonconservation of total momentum. Unfortunately, no accurate experimental limits for this parameter are known. It thus remains for future experiments in lunar-laser ranging to test this theory.

Smalley, L. L.↗
NASA NTRS1976

Correlation between nonequilibrium thermodynamic theory and V-I curves of a thermionic converter

The methods of irreversible thermodynamics are used as a basis for developing a transport theory applicable to thermionic cesium diodes. This theory is applied in describing certain aspects of experimental voltage-current (V-I) characteristic curves of a thermionic diode. Emphasis is placed on the open-circuit voltage and short-circuit current of the V-I curves. Experimental results show that the open-circuit voltage is essentially independent of the interelectrode spacing, whereas the short-circuit current varies inversely with the interelectrode separation. The inverse dependence is in agreement with the results of the present analysis and also with results expected from diffusion theory, which has been used in other analyses. In fact, the theory used in this investigation reduces to diffusion theory under special assumptions. Deviations from diffusion theory, which were found in experimental results, can be accounted for using the theory developed in this paper.

Robinson, L. B.↗
NASA NTRS1980

Combined linear theory/impact theory method for analysis and design of high speed configurations

Pressure distributions on a wing body at Mach 4.63 are calculated. The combined theory is shown to give improved predictions over either linear theory or impact theory alone. The combined theory is also applied in the inverse design mode to calculate optimum camber slopes at Mach 4.63. Comparisons with optimum camber slopes obtained from unmodified linear theory show large differences. Analysis of the results indicate that the combined theory correctly predicts the effect of thickness on the loading distributions at high Mach numbers, and that finite thickness wings optimized at high Mach numbers using unmodified linear theory will not achieve the minimum drag characteristics for which they are designed.

Brooke, D.↗
NASA NTRS1981

An improved transverse shear deformation theory for laminated antisotropic plates

An improved transverse shear deformation theory for laminated anisotropic plates under bending is presented. The theory eliminates the need for an arbitrarily chosen shear correction factor. For a general laminate with coupled bending and stretching, the constitutive equations connecting resultants with average displacements and rotations are derived. Simplified forms of these relations are also obtained for the special case of a symmetric laminate with uncoupled bending. The governing equation for this special case is obtained as a sixth-order equation for the normal displacement requiring prescription of the three physically natural bounday conditions along each edge. For the limiting case of isotropy, the present theory reduces to an improved version of Mindlin's theory. Numerical results are obtained from the present theory for an example of a laminated plate under cylindrical bending. Comparison with results from exact three-dimensional analysis shows that the present theory is more accurate than other theories of equivalent order.

Murthy, M. V. V.↗
NASA NTRS1985

Stability and vibration of isotropic, orthotropic and laminated plates according to a higher-order shear deformation theory

A higher-order shear deformation theory is used to demonstrate the natural frequencies and buckling loads of elastic plates. The theory accounts for parabolic distribution of the transverse shear strains through the thickness of the plate and rotary inertia. Exact solutions of simply supported plates are obtained and the results are compared with the exact solutions of three-dimensional elasticity theory, the first-order shear deformation theory, and the classical plate theory. The present theory predicts the frequencies and buckling loads more accurately when compared to the first-order and classical plate theories.

Reddy, J. N.↗
NASA NTRS1990

On refined theories of composite laminates

A review of the developments in the displacement-based theories of plates is presented. It is shown that many of the third-order theories reported in the literature are based on the same or equivalent displacement field, and thus lead to the same results. A strain-consistent third-order theory is presented, which contains most existing third-order plate theories as special cases. The layer-wise laminate plate theory proposed is also reviewed. The accuracy of the theories is evaluated by comparing the numerical solutions with those of the three-dimensional elasticity theory.

Reddy, J. N.↗
NASA NTRS1991

A unified viscous theory of lift and drag of 2-D thin airfoils and 3-D thin wings

A unified viscous theory of 2-D thin airfoils and 3-D thin wings is developed with numerical examples. The viscous theory of the load distribution is unique and tends to the classical inviscid result with Kutta condition in the high Reynolds number limit. A new theory of 2-D section induced drag is introduced with specific applications to three cases of interest: (1) constant angle of attack; (2) parabolic camber; and (3) a flapped airfoil. The first case is also extended to a profiled leading edge foil. The well-known drag due to absence of leading edge suction is derived from the viscous theory. It is independent of Reynolds number for zero thickness and varies inversely with the square root of the Reynolds number based on the leading edge radius for profiled sections. The role of turbulence in the section induced drag problem is discussed. A theory of minimum section induced drag is derived and applied. For low Reynolds number the minimum drag load tends to the constant angle of attack solution and for high Reynolds number to an approximation of the parabolic camber solution. The parabolic camber section induced drag is about 4 percent greater than the ideal minimum at high Reynolds number. Two new concepts, the viscous induced drag angle and the viscous induced separation potential are introduced. The separation potential is calculated for three 2-D cases and for a 3-D rectangular wing. The potential is calculated with input from a standard doublet lattice wing code without recourse to any boundary layer calculations. Separation is indicated in regions where it is observed experimentally. The classical induced drag is recovered in the 3-D high Reynolds number limit with an additional contribution that is Reynold number dependent. The 3-D viscous theory of minimum induced drag yields an equation for the optimal spanwise and chordwise load distribution. The design of optimal wing tip planforms and camber distributions is possible with the viscous 3-D wing theory.

Yates, John E.↗