Search NASA⌕ Search

SEARCH · Search NASA

Results for “THETA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Behavior of some singly ionized, heavy-ion impurities during compression in a theta-pinch plasma

The introduction of a small percentage of an impurity gas containing a desired element into a theta-pinch plasma is a standard procedure used to investigate the spectra and atomic processes of the element. This procedure assumes that the mixing ratio of impurity-to-fill gases remains constant during the collapse and heating phase. Spectroscopic investigations of the constant-mixing-ratio assumption for a 2% neon and argon impurity verifies the assumption only for the neon impurity. However, for the 2% argon impurity, only 20 to 25% of the argon is in the high-temperature compressed plasma. It is concluded that the constant-mixing-ratio assumption is not applicable to the argon impurity.

Jalufka, N. W.↗
NASA NTRS1984

Origin of the plasma in a cross-polar cap auroral feature (theta aurora)

Ion composition data obtained from a particularly well observed cross-polar cap auroral feature (theta aurora) are presented. Two components of the hot plasma are identified, one from the ionosphere below and the second from the distant plasma sheet. These observations provide strong support for the conclusion that the cross-polar cap auroral feature occurs on field lines closing through the distant plasma sheet or plasma sheet boundary layer. Taken together with the previously published observations, these new results establish substantial constraints on models for the overall polar cap topology. However, they do not unambiguously favor either of the two principal topologies discussed in the literature.

Peterson, W. K.↗
NASA NTRS1986

Optical region elemental abundance analyses of B and A stars. V - The normal stars Theta Leonis, Tau Herculis, 14 Cygni, and 5 Aquarii

Abundance analyses using optical region data and fully line-blanketed model atmospheres have been performed for four sharp-lined normal B and A type stars. The microturbulent velocities of all the stars are found to follow the same relation with temperature. Some of the stars studied in this paper are found to have one or two anomalous abundances, such as the zirconium abundance of Theta Leo.

Adelman, S. J.↗
NASA NTRS1986

Ultraviolet and visual variability of Theta CrB during a normal B-phase following a shell phase (1980-1985)

Based on far-UV and visual observations made between 1980 and 1985, the phenomena characterizing the end of a shell phase of Theta-CrB, and the normal B-phase following it, are described as part of a long-term study of Be stars. The strength, shape, and velocity of the C IV, Si IV, and Al III resonance lines, and the Fe III lines of low excitation, show associated variability patterns over the whole range of ionization observable in the IUE and visual spectra. The observed variability pattern consists of a one-year narrow-line stage where the lines show narrow absorption cores close to rest wavelength, a two-year series of abrupt changes between a weak and a strong line, and a damping out of these variations leaving the observed spectrum in a lower ionization state. The existence of a phase-lag between similar phenomena occurring in the superionized and subionized/normally ionized regions, is noted.

Doazan, V.↗
NASA NTRS1989

An analysis of shear failure mechanisms for compression-loaded (+/-theta)s laminates

An analysis of interlaminar and in-plane shear failures for (+/-theta)s composite laminates loaded in uniaxial compression is described. A laminate model is presented that idealizes each ply as a plate supported by an elastic foundation. A nonlinear analysis for plies with short-wavelength initial imperfections is used to determine laminate stresses and interlaminar strains. A failure criterion that uses the results of the nonlinear analysis is introduced.

Shuart, Mark J.↗
NASA NTRS1989

Effect of the theta-alpha-Al2O3 transformation on the oxidation behavior of beta-NiAl+Zr

Isothermal oxidation of NiAl+Zr has been performed over the temperature range of 800-1200 C and studied by TGA, XRD, and SEM. A discontinuous decrease in growth rate of two orders of magnitude was observed at 1000 C due to the formation of alpha-Al2O3 from theta-Al2O3. This transformation also resulted in a dramatic change in the surface morphology of the scales, as a whisker topography was changed into a weblike network of oxide ridges and radial transformation cracks. It is believed that the ridges are evidence for a short-circuit outward aluminum diffusion growth mechanism that has been documented in a number of O-18 tracer studies.

Rybicki, George C.↗
NASA NTRS1989

Neonlike Ar and Cl 3p-3s emission from a theta-pinch plasma

Time-resolved extreme-UV emission from sixteen 3p-3s transitions, some of the type in which lasing has been demonstrated in heavier elements, is measured for neonlike Ar(8+) and Cl(7+). These observations are made on a hydrogen theta-pinch plasma with a 5 pct admixture of argon or freon (for Cl). Fourteen 3d-3p spectral lines are also detected. The measured intensities are compared to theoretical predictions. There is no evidence of anomalously intense lines originating on 2p5 3p J = 2 upper levels compared to J = 0, as observed in gain experiments.

Elton, R. C.↗
NASA NTRS1989

Acceleration, gamma, and theta guidance for abort landing in a windshear

This paper is concerned with the guidance of abort landing trajectories in a windshear. First, optimal trajectories are determined by minimizing the peak value of the altitude drop. Then, two guidance schemes, approximating the optimal trajectors, are developed: acceleration guidance (based on the relative acceleration) and gamma guidance (based on the absolute path inclination). From numerical experiments, it appears that both the acceleration guidance and the gamma guidance yield trajectories that are close to the optimal trajectory. In addition, a theta guidance scheme (modified constant pitch guidance) is developed that is superior to the constant pitch guidance in terms of the altitude loss and the survival capability in severe windshears.

Miele, A.↗
NASA NTRS1994

The Theta-z relation for HST bulges and disks out to z approximately equal 0.8

We present Hubble Space Telescope (HST) scale lengths and ground-based redshifts for 63 faint field galaxies down to I less than or approximately 21.5 mag from the Medium-Deep Survey. These have measured redshifts z less than or approximately 0.8 and half-light radii 0.1 sec less than or approximately r(sub e), r(sub s) less than or approximately 5 sec. We present the Theta-z relation for r(exp 1/4)-bulges and exponential disks separately for world models with q(sub 0) = 0.0-1.0. We show that selection against low surface brightness galaxies in the HST images and ground-based spectra is comparable to that in local surveys. We compare our HST disk-dominated galaxies to a magnitude-limited subsample of the European Southern Observatory (ESO)-Uppsala local spirals. Extrapolating the best-fit local exponential disk scale length (r(sub s) = 3.5 kpc for H(sub 0) = 75) out to z = 0.8, we find a rather symmetrical distribution of HST disks around this value. This implies that galaxy disks have been stable since z is approximately equal to 0.8. We compare our HST bulge-dominated galaxies with r(exp 1/4)-profiles to a magnitude-limited subsample of local Seven Samurai ellipticals. The latter have a local best fit r(sub e) = 5.7 kpc. Our HST bulge sample shows a similar distribution for z less than or approximately 0.8. Elliptical galaxy scale lengths have thus also remained rather constant since z less than or approximately 0.8. We set limits to their possible evolution.

Mutz, Steven B.↗
NASA NTRS2002

Asteroseismology from Space: The Delta Scuti Star Theta(sup 2) Tauri Monitored by the WIRE Satellite

The bright variable star (theta)(sup 2) Tau was monitored with the star camera on the Wide-Field Infrared Explorer satellite. Twelve independent frequencies were detected down to the 0.5 mmag amplitude level. Their reality was investigated by searching for them using two different algorithms and by some internal checks: both procedures strengthened our confidence in the results. All the frequencies are in the range 10.8 - 14.6 cd(exp -1). The histogram of the frequency spacings shows that 81% are below 1.8 d; rotation may thus play a role in the mode excitation. The fundamental radial mode is not observed, although it is expected to occur in a region where the noise level is very low (55 (micro)mag). The rms (root mean square) residual is about two times lower than that usually obtained from successful groundbased multisite campaigns. The comparison of the results of previous campaigns with the new ones establishes the amplitude variability of some modes.

Poretti, E.↗
NASA NTRS2002

Asteroseismology from Space: The Delta Scuti Star Theta(sup 2) Tauri Monitored by the WIRE Satellite

The bright variable star theta(sup 2) Tau was monitored with the star camera on the Wide-Field Infrared Explorer satellite. Twelve independent frequencies were detected down to the 0.5 mmag amplitude level. Their reality was investigated by searching for them using two different algorithms and by some internal checks: both procedures strengthened our confidence in the results. All the frequencies are in the range 10.8-14.6 cd(exp -1). The histogram of the frequency spacings shows that 81% are below 1.8 d; rotation may thus play a role in the mode excitation. The fundamental radial mode is not observed, although it is expected to occur in a region where the noise level is very low (55 mu mag). The rms residual is about two times lower than that usually obtained from successful groundbased multisite campaigns. The comparison of the results of previous campaigns with the new ones establishes the amplitude variability of some modes.

Poretti, E.↗
NASA NTRS2007

Current sheet Formation in a Conical Theta Pinch Faraday Accelerator with Radio-Frequency Assisted Discharge

The inductive formation of current sheets in a conical theta pinch FARAD (Faraday Accelerator with Radio-frequency Assisted Discharge) thruster is investigated experimentally with time-integrated photography. The goal is to help in understanding the mechanisms and conditions controlling the strength and extent of the current sheet, which are two indices important for FARAD as a propulsion concept. The profiles of these two indices along the inside walls of the conical acceleration coil are assumed to be related to the profiles of the strength and extent of the luminosity pattern derived from photographs of the discharge. The variations of these profiles as a function of uniform back-fill neutral pressure (with no background magnetic field and all parameters held constant) provided the first clues on the nature and qualitative dependencies of current sheet formation. It was found that there is an optimal pressure for which both indices reach a maximum and that the rate of change in these indices with pressure differs on either side of this optimal pressure. This allowed the inference that current sheet formation follows a Townsend-like breakdown mechanism modified by the existence of a finite pressure-dependent radio-frequency-generated electron density background. The observation that the effective location of the luminosity pattern favors the exit-half of the conical coil is explained as the result of the tendency of the inductive discharge circuit to operate near its minimal self-inductance. Movement of the peak in the luminosity pattern towards the upstream side of the cone with increasing pressure is believed to result from the need of the circuit to compensate for the increase in background plasma resistivity due to increasing pressure.

Hallock, Ashley K.↗
NASA NTRS2008

Current Sheet Formation in a Conical Theta Pinch Faraday Accelerator with Radio-frequency Assisted Discharge

Data from an inductive conical theta pinch accelerator are presented to gain insight into the process of inductive current sheet formation in the presence of a preionized background gas produced by a steady-state RF-discharge. The presence of a preionized plasma has been previously shown to allow for current sheet formation at lower discharge voltages and energies than those found in other pulsed inductive accelerator concepts, leading to greater accelerator efficiencies at lower power levels. Time-resolved magnetic probe measurements are obtained for different background pressures and pulse energies to characterize the effects of these parameters on current sheet formation. Indices are defined that describe time-resolved current sheet characteristics, such as the total current owing in the current sheet, the time-integrated total current ('strength'), and current sheet velocity. It is found that for a given electric field strength, maximums in total current, strength, and velocity occur for one particular background pressure. At other pressures, these current sheet indices are considerably smaller. The trends observed in these indices are explained in terms of the principles behind Townsend breakdown that lead to a dependence on the ratio of the electric field to the background pressure. Time-integrated photographic data are also obtained at the same experimental conditions, and qualitatively they compare quite favorably with the time-resolved magnetic field data.

Polzin, Kurt A.↗
NASA NTRS2013

Single and Multi-Pulse Low-Energy Conical Theta Pinch Inductive Pulsed Plasma Thruster Performance

Impulse bits produced by conical theta-pinch inductive pulsed plasma thrusters possessing cone angles of 20deg, 38deg, and 60deg, were quantified for 500J/pulse operation by direct measurement using a hanging-pendulum thrust stand. All three cone angles were tested in single-pulse mode, with the 38deg model producing the highest impulse bits at roughly 1 mN-s operating on both argon and xenon propellants. A capacitor charging system, assembled to support repetitively-pulsed thruster operation, permitted testing of the 38deg thruster at a repetition-rate of 5 Hz at power levels of 0.9, 1.6, and 2.5 kW. The average thrust measured during multiple-pulse operation exceeded the value obtained when the single-pulse impulse bit is multiplied by the repetition rate.

Hallock, A. K.↗
DOE OSTI2024

Hydrothermally and thermally stable catalytic materials based on theta-alumina

A material and a method of making hydrothermally stable (catalytic) materials on the basis of theta-alumina support that is thermally and hydrothermally stable up to 1,150 C with metal, mixed metal-, metal-oxide nanoparticles dispersed upon it. Such materials did not lose significant amounts of their catalytic activity at temperature ranges for industrially relevant applications (including hydrocarbon oxidation, nitric oxide reduction, carbon monoxide oxidation) even after hydrothermal aging up to 1,150° C.

Khivantsev, Konstantin↗