Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIN COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

New Developments in Nb3Sn PIT Strand: The Effects of Titanium and Second Phase Additions on the Superconducting Properties

We report the effect of titanium on the transport properties of multifilament PIT strand. In addition, the effect of second phase yttrium additions on the microstructure and the bulk pinning force are reported for PIT Nb{sub 3}Sn mono-core wires. High resolution SEM, EDS, magnetization, and transport measurements were utilized to evaluate the superconducting properties.

36 MATERIALS SCIENCE↗

The Mechanical and Microstructural Changes of Sn-Ag-Bi Solders with Cooling Rate and Bi Content Variations

The purpose of this study is to investigate the influence of cooling rate and Bi addition on the microstructure evolution and mechanical properties of Sn-3.5Ag alloy. A series of Sn-3.5Ag-xBi solders has been fabricated with Bi content in the range of 0.5-3.5 wt.%. After solution heat treatment at 170 °C for 24 h and subsequent aging heat treatment at 100 °C for 2 h, samples were divided into two groups. One group was rapidly quenched into iced water (water quenching) for the fast cooling rate (20 °C/s), while the second group was slowly cooled (furnace cooling) in the furnace for the slow cooling rate (0.2 °C/s) after the furnace reflow. The microstructural evolutions of the present solders have been investigated using x-ray diffraction and scanning electron microscopy. The microhardness was measured to correlate the mechanical properties to alloy compositions and cooling rate. It was found that the microhardness of Sn-3.5Ag-xBi solders increased with increasing cooling rate. The indentation creep curves have been evaluated from the obtained microhardness values. Results revealed the steady-state creep rate decreased with increasing Bi content exhibiting an anomalous behavior at 2.5Bi. The reason for improved creep resistance of Sn-3.5Ag-xBi solders is the result of the combination of the solid solution strengthening and precipitation strengthening of Bi. The mean values of stress exponent indicated that the operative creep mechanism is dislocation climb.

36 MATERIALS SCIENCE↗

Effect of Pore Size, Morphology and Orientation on the Bulk Stiffness of a Porous Ti35Nb4Sn Alloy

The metal foams of a titanium alloy were designed to study porosity as well as pore size and shape independently. These were manufactured using a powder metallurgy/space-holder technique that allowed a fine control of the pore size and morphology; and then characterized and tested against well-established models to predict a relationship between porosity, pore size and shape, and bulk stiffness. Among the typically used correlations, existing power-law models were found to be the best fit for the prediction of macropore morphology against compressive elastic moduli, outperforming other models such as exponential, polynomial or binomial. Other traditional models such as linear ones required of updated coefficients to become relevant to metal porous sintered macrostructures. The new coefficients reported in this study contribute toward a design tool that allows the tailoring of mechanical properties through porosity macrostructure. The results show that, for the same porosity range, pore shape and orientation have a significant effect on mechanical performance and that they can be predicted. Conversely, pore size has only a mild impact on bulk stiffness.

36 MATERIALS SCIENCE↗

Effect of the Soldering Atmosphere on the Wettability Between Sn4.0Ag0.5Cu (in wt.%) Lead-Free Solder Paste and Various Substrates

The “degree of wetting,” which is related to the contact angle (θ) between the molten solder and the substrate, is a useful parameter on the solderability process control. The contact angle, however, is strongly dependent on the type of substrate surface finish and used atmosphere (inert or non-inert). Furthermore, the surface tension, being an important parameter on the solderability process and performance, can also be achieved if the contact angle is known. In this study, the SAC405 [Sn4.0Ag0.5Cu (in wt.%)] solder paste contact angle was measured, by the “sessile drop” method, as a function of the temperature, surface pad finish and used atmosphere. The results are discussed, and the contact angles obtained for the different conditions are compared and discussed. Then, the surface tension (experimental) was obtained from the measured contact angle and compared with the obtained by using computation models (theoretical). The experiments performed in high vacuum conditions, i.e., low oxygen content, over a temperature range, allowed the evaluation and understanding of the surface oxides layers role on the solder wettability. The present study shows that in the soldering process, even in an inert atmosphere, usually used in industry, occurs the formation of superficial oxides, over the liquid solder and/or at the pad surfaces, that strongly affects the solder paste wettability, specially with Sn and OSP (organic solderability preservative) finishing. Differences in contact angle of ≥ 10° were determined between the two types of used atmospheres. The experimental surface tension and theoretical surface tension obtained, for the NiAu substrate type, present good correlation. The lower contact angle values were obtained for the NiAu and OSP finish types, independently of the atmosphere type.

36 MATERIALS SCIENCE↗

The Sliding Wear and Frictional Behavior of M50-10 wt.%(Sn-Ag-Cu) Self-Lubricating Materials at Elevated Temperatures

As the main steel used in the aero-engine main shaft bearings, the tribological properties of M50 can directly affect the performance of aero-engine. The purpose of this study is to design the reasonable composition of Sn-Ag-Cu alloy and investigate the wear mechanisms of M50-10 wt.%(Sn-Ag-Cu) composites (MSACC) prepared by SPS sliding against Si{sub 3}N{sub 4} ball from 25 to 550 °C at 12 N-0.25 m/s. XRD, EPMA, FESEM and EDS mappings are conducted to understand the major mechanisms leading to the improvement in the sliding behavior of MSACC. The results indicate that MSACC with different specifications of Sn-Ag-Cu alloy shows excellent friction and wear properties from 25 to 550 °C compared to M50. M50-10 wt.%(50Sn40Ag10Cu) (MSACC-2) shows the distinguished tribological performance for the lower friction coefficients of 0.22-0.61 and less wear rates of 1.7-4.1 × 10{sup −6} mm{sup 3} N{sup −1} m{sup −1}, which is attributed to the formed excellent lubricating structure consisting of the lubricating film with massive Sn-Ag-Cu alloy and intermetallic compounds formed during the friction process, as well as the underneath mixed layer who can well support the lubricating film due to the good intersolubility between the designed Sn-Ag-Cu alloy and M50 (Fe).

36 MATERIALS SCIENCE↗

High pressure study and bonding analysis of Mg{sub 2}Co{sub 3}Sn{sub 10+x}

Intermetallic materials with large unit cells are scientifically interesting and challenging due to their structural and chemical complexity. The investigated hexagonal Mg{sub 2}Co{sub 3}Sn{sub 10+x} crystallizes with 120 atoms per unit cell and a unit cell volume of 2655 A{sup 3}. An in-house single-crystal high pressure study was done using a recently developed low background diamond-anvil cell. The investigated compound is structurally stable up to the highest reached pressure of 9.69 GPa. Compressibility measurements revealed the c{sup {yields}}-axis to be slightly less compressible than the a{sup {yields}}-axis. A chemical bonding analysis based on the analysis of the topology of the electron localization function identified Mg{sub 2}Co{sub 3}Sn{sub 10+x} as a compound combining localized and delocalized chemical bonding in its structure. The macroscopic properties of the compound are dominated by the metallic 3D framework, which is also responsible for the anisotropic compressibility. - Mg{sub 2}Co{sub 3}Sn{sub 10+x} belongs to the fascinating group of compounds combining localized and delocalized chemical bonding of the same element type in their structure. The structural stability up to 9.69 GPa and chemical bonding of this complex metallic alloy (120 atoms per unit cell) is reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure evolution, grain morphology variation and mechanical property change of Cu-Sn intermetallic joints subjected to high-temperature aging

Highlights: • The δ-Cu{sub 41}Sn{sub 11} could be formed by reaction of 11Cu{sub 3}Sn + 9Cu → Cu{sub 41}Sn{sub 11} during aging above 350 °C. • The temperature effects on the growth rate and grain morphology of Cu{sub 41}Sn{sub 11} phase were found. • The Cu{sub 41}Sn{sub 11} joints with refined grains exhibited higher hardness and shear strength. • The Cu{sub 41}Sn{sub 11} joints exhibited a combination of transgranular and intergranular fracture during shear test. - Abstract: In this work, the aging treatment was carried out on full Cu{sub 3}Sn joints at different temperatures for various durations, the microstructure evolution, grain morphology variation and mechanical property change of joints were investigated. The temperature effects on the growth rate and grain morphology of Cu{sub 41}Sn{sub 11} phase were found: The complete transformation from Cu{sub 3}Sn phase to Cu{sub 41}Sn{sub 11} phase in joints needed 300 h at 400 °C, but 4 h at 500 °C. The Cu{sub 41}Sn{sub 11} phase formed at 400 °C consisted of columnar grains with an average width of 23.5 μm, while the Cu{sub 41}Sn{sub 11} phase formed at 500 °C consisted columnar grains with an average width of 8.5 μm. The average hardness and shear strength values of the Cu{sub 41}Sn{sub 11} joints formed at 400 °C were 432.5 HV and 62 MPa, while the joints formed at 500 °C exhibited higher hardness and shear strength (451.5 HV and 65 MPa). Besides, the Cu{sub 41}Sn{sub 11} joint was found to exhibit a combination of transgranular and intergranular fracture during shear test.

36 MATERIALS SCIENCE↗

The effect of Cerium addition on microstructure and mechanical properties of high pressure die cast Mg-5Sn alloy

Highlights: • The alloying additive has good grain refinement effect. • The addition of Ce to the Mg-5Sn alloy led to the formation of the new intermetallic phases CeMgSn and Ce{sub 5}Sn{sub 4}. • The hardness, yield and tensile strength of Mg-5Sn alloy were improved with addition of Ce. • The elongation of Mg-5Sn was increased up to 5wt.%Ce addition, and then decreased with addition of 7 wt.%Ce. • The yield and tensile strength of the Ce added alloy were higher than those of the base alloy at elevated temperatures. - Abstract: The effect of Cerium addition to Mg-5Sn alloy and its influence on the microstructure and mechanical properties of the alloy were investigated in this work. The microstructural investigations indicate that the alloying addition of Ce leads to effective grain refinement. Also, it was observed that adding Ce to the Mg-5Sn alloy results in the formation of new phases in the alloy such as Ce{sub 5}Sn{sub 4} and CeMgSn. These intermetallic phases were considered to be effective on the enhancement of the hardness of Mg-5Sn alloy. Furthermore, the tensile test results at room temperature and elevated temperatures revealed that the yield and tensile strength of the Ce added alloy were higher than those of the base alloy. The elongation was also improved up to 5 wt% Ce addition while higher amounts decreased the elongation both at room and elevated temperatures.

36 MATERIALS SCIENCE↗

Concept for a fourth generation electron cyclotron resonance ion source

A fourth generation electron cyclotron resonance ion source with an operating frequency between 40 and 56 GHz has the potential to quadruple the heavy-ion beam currents and provide a cost effective upgrade path for heavy ion drivers in use or in the planning stage at radioactive beam facilities. Design studies show it is feasible to produce the required magnetic fields in the plasma chamber, 7 T axially and 4 T in the radial direction with a magnetic structure using commercially available Nb{sub 3}Sn superconducting materials. In this paper we describe the design of such a magnet structure including a 3D analysis of the Lorentz forces generated by the magnetic fields and the necessary clamping structure to stabilize the conductor against these forces.

43 PARTICLE ACCELERATORS↗

Employing time-resolved terahertz spectroscopy to analyze carrier dynamics in thin-film Cu{sub 2}ZnSn(S,Se){sub 4} absorber layers

We report the application of time-resolved terahertz spectroscopy (TRTS) to measure photoexcited carrier lifetimes and mobility, and to determine recombination mechanisms in Cu{sub 2}ZnSn(S,Se){sub 4} (CZTSSe) thin films fabricated from nanocrystal inks. Ultrafast time resolution permits tracking the evolution of carrier density to determine recombination rates and mechanisms. The carrier generation profile was manipulated by varying the photoexcitation wavelength and fluence to distinguish between surface, Shockley-Read-Hall (SRH), radiative, and Auger recombination mechanisms and determine rate constants. Surface and SRH recombination are the dominant mechanisms for the air/CZTSSe/SiO{sub 2}/Si film stack. Diffusion to, and then recombination at, the air-CZTSSe interface occurred on the order of 100 picoseconds, while SRH recombination lifetimes were 1–2 nanoseconds. TRTS measurements can provide information that is complementary to conventional time-resolved photoluminescence measurements and can direct the design of efficient thin film photovoltaics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved electrical mobility in highly epitaxial La:BaSnO{sub 3} films on SmScO{sub 3}(110) substrates

Heteroepitaxial growth of BaSnO{sub 3} and Ba{sub 1−x}La{sub x}SnO{sub 3} (x = 7%) lanthanum doped barium stannate thin films on different perovskite single crystal (SrTiO{sub 3} (001) and SmScO{sub 3} (110)) substrates has been achieved by pulsed laser deposition under optimized deposition conditions. X-ray diffraction measurements indicate that the films on either of these substrates are relaxed due to the large mismatch and present a high degree of crystallinity with narrow rocking curves and smooth surface morphology while analytical quantification by proton induced X-ray emission confirms the stoichiometric La transfer from a polyphasic target, producing films with measured La contents above the bulk solubility limit. The films show degenerate semiconducting behavior on both substrates, with the observed room temperature resistivities, Hall mobilities, and carrier concentrations of 4.4 mΩ cm, 10.11 cm{sup 2} V{sup −1} s{sup −1}, and 1.38 × 10{sup 20} cm{sup −3} on SmScO{sub 3} and 7.8 mΩ cm, 5.8 cm{sup 2} V{sup −1} s{sup −1}, and 1.36 × 10{sup 20} cm{sup −3} on SrTiO{sub 3} ruling out any extrinsic contribution from the substrate. The superior electrical properties observed on the SmScO{sub 3} substrate are attributed to reduction in dislocation density from the lower lattice mismatch.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and magnetocaloric properties of Mn{sub 4–x}Fe{sub x}Ga₂Sn

We investigate the magnetic and magnetocaloric properties of the new Mn{sub 4–x}Fe{sub x}Ga₂Sn compounds (x = 0, 0.1, 0.4, 0.6, and 0.8) from DC magnetization measurements. These phases crystallize in a lacunar form of the η-Fe{sub 2–x}Ge type of structure (P6₃/mmc). They present a second-order paramagnetic to ferromagnetic transition whose temperature increases upon increasing the Fe content from T C =317 K for x=0 up to T C =411 K for x=0.8. The alloys with x≤0.4 further exhibit another transition at lower temperature associated with a spin reorientation. The maximal magnetization and magnetic entropy change are found almost constant throughout the series close to ~7.4 μ B /f.u. and ~12 mJ cm³ K⁻¹ (for μ₀ΔH=2.4 T), respectively. The magnetocaloric properties of Mn{sub 4–x}Fe{sub x}Ga₂Sn are compared with those of previously investigated materials with high-temperature magnetic transition and their potential interest for high-temperature magnetocaloric applications is briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature-dependent dielectric and energy-storage properties of Pb(Zr,Sn,Ti)O{sub 3} antiferroelectric bulk ceramics

The dielectric and energy-storage properties of Pb{sub 0.99}Nb{sub 0.02}[(Zr{sub 0.60}Sn{sub 0.40}){sub 0.95}Ti{sub 0.05}]{sub 0.98}O{sub 3} (PNZST) bulk ceramics near the antiferroelectric (AFE)-ferroelectric (FE) phase boundary are investigated as a function of temperature. Three characteristic temperatures T{sub 0}, T{sub C}, T{sub 2} are obtained from the dielectric temperature spectrum. At different temperature regions (below T{sub 0}, between T{sub 0} and T{sub C}, and above T{sub C}), three types of hysteresis loops are observed as square double loop, slim loop and linear loop, respectively. The switching fields and recoverable energy density all first increase and then decrease with increasing temperature, and reach their peak values at ∼T{sub 0}. These results provide a convenient method to optimize the working temperature of antiferroelectric electronic devices through testing the temperature dependent dielectric properties of antiferroelectric ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Galvanomagnetic properties of Heusler alloys Co{sub 2}FeZ (Z = Al, Si, Ga, Ge, In, Sn, Sb)

The magnetization, Hall effect, and resistivity of Heusler alloys Co{sub 2}FeZ (where Z = Al, Si, Ga, Ge, In, Sn, and Sb are s- and p-elements) have been studied at T = 4.2 K in magnetic fields H ≤ 100 kOe. In strong fields (H > 20 kOe), magnetization can be described by the Stoner model. The normal R{sub 0} and anomalous R{sub S} Hall effect coefficients have been determined. The coefficient RS is positive for almost all the studied alloys and represents a “linearly quadratic” resistivity function incorporating linear and quadratic terms. The constant R{sub 0} is negative for most alloys, and its absolute value is two or three orders of magnitude smaller than for R{sub S}. The magnetoresistivity of the studied alloys does not exceed several percent and may be both positive and negative for different specimens.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Structure, Elastic, Magnetic, and Optical Properties of Fe{sub 2}MnZ (Z = Si, Ge, and Sn) Full Heusler Alloys: First-Principle Calculations

Investigations of the electronic structure, elastic, magnetic, and optical properties of Fe{sub 2}MnZ (Z = Si, Ge, and Sn) full Heusler alloys show mechanical stability with cubic symmetry in all three alloys. They are elastically anisotropic and Fe{sub 2}MnSi is ductile whereas Fe{sub 2}MnGe and Fe{sub 2}MnSn are brittle in nature. The value of total magnetic moment is 3 μ{sub B} for Fe{sub 2}MnSi and Fe{sub 2}MnGe at their equilibrium lattice constants and follows the Slater–Pauling curve. Fe{sub 2}MnSn possess the largest magnetic moment among the three with a value of 5.73 μ{sub B} at equilibrium lattice constant. Fe{sub 2}MnSi shows half-metallic nature with 100% spin polarization for a wide range of lattice parameters and is useful for spintronics devices. Good optical properties over wide photon energies point to the possible use of these alloys as radiation shielding materials, optical filters, and photo-electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Calculations of New Full Heusler Alloys Rh{sub 2}ZrX (X = Al, Ga, In, Si, Ge, Sn)

In recent years, Heusler alloys have attracted extensive attention because of their usefulness in spintronic devices. In this paper, the structural, electronic, and magnetic properties of full Heusler alloys Rh{sub 2}ZrX (X = Al, Ga, In, Si, Ge, Sn) have been studied using Quantum Espresso software package based on density functional theory. Calculations have been done by GGA and GGA+U methods. The investigations on the structural properties of the alloys showed that the Rh{sub 2}ZrSi alloy had the most stable structure (E{sub coh} = − 1.807 eV) among the six compounds reviewed. The results of GGA calculation on electronic properties of Rh{sub 2}ZrX alloys show that while the Rh{sub 2}ZrX (X = Al, Ga, In) alloys had metallic nature due to overlapping between conduction and valance band at Fermi level for both spin directions, the Rh{sub 2}ZrX (X = Si, Ge, Sn) alloys had half-metal characteristic. Also, Rh{sub 2}ZrSi and Rh{sub 2}ZrGe alloys had 100% spin polarization. By studying the magnetic properties, it was found that the Rh{sub 2}ZrAl and Rh{sub 2}ZrSi alloys were antiferromagnetic, while the Rh{sub 2}ZrGa, Rh{sub 2}ZrIn, Rh{sub 2}ZrGe, and Rh{sub 2}ZrSn alloys were ferromagnetic materials. Also, the total spin magnetic moment of alloys was found in accordance with the Slater-Pauling rule. The results obtained using GGA+U calculation are slightly different from the results of GGA calculation.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of a Ag Micro-Alloyed Mg-5Sn Alloy

Effects of 1.5 wt.% Ag addition and solid solution + artificial ageing at 160 °C on the microstructure and mechanical properties of a Mg-5Sn alloy have been studied. The results show that Ag addition has significantly hardened the solution-treated Mg-5Sn alloy. During the ageing process, the hardness increase rate and the strength and ductility of the Mg-5Sn alloy at each state are also improved by Ag addition. The improved strengthening behavior is primarily attributed to the refinement distribution of the Mg{sub 2}Sn precipitates, the enhanced precipitation process, and the synergistic strengthening effect of Mg{sub 2}Sn and a metastable plate DO{sub 19} phase formed at lower ageing temperature. For each solution-treated alloy, the strength and ductility are higher than the corresponding cast ones. Ageing further enhances the yield strength, and the ductility of the Mg-5Sn-1.5Ag alloy is also increased after ageing. The fracture surfaces of the both peak-aged alloys exhibit the characteristic of a mixture of quasi-cleavage and ductile fracture.

36 MATERIALS SCIENCE↗

Magnetic instability in Ce heavy fermion compounds

Different types of cerium heavy fermion compounds are discussed: cubic antiferromagnetic ground states (CeAl 2 , CePb 3 , Celn 3 ) and Pauli paramagnetic ground states (CeSn 3 , CeRu 2 Si 2 ). Applying external variables such as pressure or magnetic field restores a localized Fermi liquid state. Special attention is paid to CeRu 2 Si 2 which is approaching a singular magnetic instability for T→ 0. Comparison between pressure and alloying effects emphasize the important role of the itineracy of the 4f electrons at the magnetic instability.

36 MATERIALS SCIENCE↗