Search NASA⌕ Search

SEARCH · Search NASA

Results for “TRAVELING WAVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Design and performance evaluation of small, two- and four-stage depressed collectors for a 4.8 to 9.6 GHz high-performance traveling wave tube

A program to improve the efficiency of traveling wave tubes (TWT's) for use in electronic countermeasure (ECM) systems by applying multistage depressed collector (MDC) and spent beam refocusing techniques is studied. Three dimensional electron trajectories are computed through-out the slow wave structure of the TWT, the spent beam refocuser, and the depressed collector. Both TWT and MDC performances are analytically evaluated.

Ramins, P.↗
NASA NTRS1983

Travelling wave effects in large space structures

Several aspects of travelling waves in Large Space Structures(LSS) are discussed. The dynamic similarity among LSS's, electric power systems, microwave circuits and communications network is noted. The existence of time lag between actuation and response is illuminated with the aid of simple examples, and their prediction is demonstrated. To prevent echoes, communications lines have matched terminations; this idea is applied to the design of dampers of one dimensional structures. Periodic structures act as mechanical band pass filters. Implications of this behavior are examined on a simple example. It is noted that the implication is twofold; continuum models of periodic lattice structures may err considerably; on the other hand, it is possible to design favorable transmission (and resonance) characteristics into the structure.

Vonflotow, A.↗
NASA NTRS1985

10-30 GHz monolithic GaAs travelling-wave divider/combiner

A four-way monolithic GaAs traveling-wave power divider/combiner has been designed, fabricated and evaluated. With a design center frequency of 20 GHz, a bandwidth of from 10 GHz to 30 GHz has been measured. The insertion loss per dividing or combining action is less than 0.5 dB, with isolation between ports no worse than 20 dB. The input/output VSWRs are better than 2:1 across the same band. This divider/combiner can readily be used with monolithic GaAs power FET amplifiers to produce a several-fold increase in output powers over the 10 to 30 GHz frequency range.

Tserng, H. Q.↗
NASA NTRS1986

Block 2A traveling-wave maser

Two 8.4GHz low-noise traveling-wave masers (TWMS) with effective input noise temperatures of 3.6 to 3.9 K and bandwidth in excess of 100 MHz have been supplied to the Deep Space Network. These TWMs are used on the 64-meter antennas at Deep Space Stations 14 and 43 to meet the requirements of the Voyager Uranus encounter. The TWMs have improved isolator assemblies and new interstage matching configurations to reduce gain/bandwidth ripple. They are equipped with followup Field Effect Transistor Amplifiers as part of the design to meet the 100-MHz bandwidth requirements of very long baseline interferometry.

Trowbridge, D. L.↗
NASA NTRS2001

Power and Efficiency Optimized in Traveling-Wave Tubes Over a Broad Frequency Bandwidth

A traveling-wave tube (TWT) is an electron beam device that is used to amplify electromagnetic communication waves at radio and microwave frequencies. TWT's are critical components in deep space probes, communication satellites, and high-power radar systems. Power conversion efficiency is of paramount importance for TWT's employed in deep space probes and communication satellites. A previous effort was very successful in increasing efficiency and power at a single frequency (ref. 1). Such an algorithm is sufficient for narrow bandwidth designs, but for optimal designs in applications that require high radiofrequency power over a wide bandwidth, such as high-density communications or high-resolution radar, the variation of the circuit response with respect to frequency must be considered. This work at the NASA Glenn Research Center is the first to develop techniques for optimizing TWT efficiency and output power over a broad frequency bandwidth (ref. 2). The techniques are based on simulated annealing, which has the advantage over conventional optimization techniques in that it enables the best possible solution to be obtained (ref. 3). Two new broadband simulated annealing algorithms were developed that optimize (1) minimum saturated power efficiency over a frequency bandwidth and (2) simultaneous bandwidth and minimum power efficiency over the frequency band with constant input power. The algorithms were incorporated into the NASA coupled-cavity TWT computer model (ref. 4) and used to design optimal phase velocity tapers using the 59- to 64-GHz Hughes 961HA coupled-cavity TWT as a baseline model. In comparison to the baseline design, the computational results of the first broad-band design algorithm show an improvement of 73.9 percent in minimum saturated efficiency (see the top graph). The second broadband design algorithm (see the bottom graph) improves minimum radiofrequency efficiency with constant input power drive by a factor of 2.7 at the high band edge (64 GHz) and increases simultaneous bandwidth by 500 MHz.

Wilson, Jeffrey D.↗
NASA NTRS1990

On the instability of Goertler vortices to nonlinear travelling waves

Recent theoretical work by Hall and Seddougui (1989) has shown that strongly nonlinear, high wavenumber Goertler vortices developing within a boundary layer flow are susceptible to a secondary instability which takes the form of travelling waves confined to a thin region centered at the outer edge of the vortex. The case is considered in which the secondary mode could be satisfactorily described by a linear stability theory and herein the objective is to extend this investigation of Hall and Seddougui (1989) into the nonlinear regime. It was found that at this stage not only does the secondary mode become nonlinear but it also interacts with itself so as to modify the governing equations for the primary Goertler vortex. In this case then, the vortex and the travelling wave drive each other and, indeed, the whole flow structure is described by an infinite set of coupled, nonlinear differential equations. A Stuart-Watson type of weakly nonlinear analysis of these equations is undertaken and concluded, in particular, that on this basis there exist stable flow configurations in which the travelling mode is of finite amplitude. Implications of the findings for practical situations are discussed and it is shown that the theoretical conclusions drawn here are in good qualitative agreement with available experimental observations.

Seddougui, Sharon O.↗
NASA NTRS1993

Simulation of TunneLadder traveling-wave tube cold-test characteristics: Implementation of the three-dimensional, electromagnetic circuit analysis code micro-SOS

The three-dimensional, electromagnetic circuit analysis code, Micro-SOS, can be used to reduce expensive time-consuming experimental 'cold-testing' of traveling-wave tube (TWT) circuits. The frequency-phase dispersion characteristics and beam interaction impedance of a TunneLadder traveling-wave tube slow-wave structure were simulated using the code. When reasonable dimensional adjustments are made, computer results agree closely with experimental data. Modifications to the circuit geometry that would make the TunneLadder TWT easier to fabricate for higher frequency operation are explored.

Kory, Carol L.↗
NASA NTRS1995

PZT Thin Film Piezoelectric Traveling Wave Motor

With the development of micro-electro-mechanical systems (MEMS), its various applications are attracting more and more attention. Among MEMS, micro motors, electrostatic and electromagnetic, are the typical and important ones. As an alternative approach, the piezoelectric traveling wave micro motor, based on thin film material and integrated circuit technologies, circumvents many of the drawbacks of the above mentioned two types of motors and displays distinct advantages. In this paper we report on a lead-zirconate-titanate (PZT) piezoelectric thin film traveling wave motor. The PZT film with a thickness of 150 micrometers and a diameter of 8 mm was first deposited onto a metal substrate as the stator material. Then, eight sections were patterned to form the stator electrodes. The rotor had an 8 kHz frequency power supply. The rotation speed of the motor is 100 rpm. The relationship of the friction between the stator and the rotor and the structure of the rotor on rotation were also studied.

Shen, Dexin↗
NASA NTRS1987

Design, fabrication and performance of small, graphite electrode, multistage depressed collectors with 200-W, CW, 8- to 18-GHz traveling-wave tubes

Small multistage depressed collectors (MDC's) which used pyrolytic graphite, ion-beam-textured pyrolytic graphite, and isotropic graphite electrodes were designed, fabricated, and evaluated in conjuntion with 200-W, continuous wave (CW), 8- to 18-GHz traveling-wave tubes (TWT's). The design, construction, and performance of the MDC's are described. The bakeout performance of the collectors, in terms of gas evolution, was indistinguishable from that of typical production tubes with copper collectors. However, preliminary results indicate that some additional radiofrequency (RF) and dc beam processing time (and/or longer or higher temperature bakeouts) may be needed beyond that of typical copper electrode collectors. This is particularly true for pyrolytic graphite electrodes and for TWT's without appendage ion pumps. Extended testing indicated good long-term stability of the textured pyrolytic graphite and isotropic graphite electrode surfaces. The isotropic graphite in particular showed considerable promise as an MDC electrode material because of its high purity, low cost, simple construction, potential for very compact overall size, and relatively low secondary electron emission yield characteristics in the as-machined state. However, considerably more testing experience is required before definitive conclusions on its suitability for electronic countermeasure systems and space TWT's can be made.

Ebihara, Ben T.↗