Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature Green function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Large on/off current ratio in hybrid graphene/BN nanoribbons by transverse electric field-induced control of bandgap

We propose an approach to design efficient electronic switches based on Graphene/BN heterostructures. By means of atomistic Tight Binding simulations, we investigate heterostructures made of an armchair BN nanoribbon sided by two armchair graphene ribbons where a significant bandgap can be opened. In particular, we show that a bandgap of about 0.55 eV can be strongly suppressed by applying a relatively weak transverse electric field of 10 mV/A. Additionally, by using non-equilibrium Green's function simulation, we show that this effect can be used to control the current in electron devices even at small bias and small length. An on/off current ratio higher than 10{sup 4} is achieved at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Acousto-exciton interaction in a gas of 2D indirect dipolar excitons in the presence of disorder

A theory for the linear and quadratic responses of a 2D gas of indirect dipolar excitons to an external surface acoustic wave perturbation in the presence of a static random potential is considered. The theory is constructed both for high temperatures, definitely greater than the exciton gas condensation temperature, and at zero temperature by taking into account the Bose–Einstein condensation effects. The particle Green functions, the density–density correlation function, and the quadratic response function are calculated by the “cross” diagram technique. The results obtained are used to calculate the absorption of Rayleigh surface waves and the acoustic exciton gas drag by a Rayleigh wave. The damping of Bogoliubov excitations in an exciton condensate due to theirs scattering by a random potential has also been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An analytic formulation for heating source memory in the thermospheric composition

Numerical calculations from a spectral circulation model are utilized to construct an analytic Green's function formulation describing the meridional, time-dependent thermospheric composition and temperature response during magnetic storms. The purpose is to develop a formulation that embodies source memory while being sufficiently simple to serve as a heuristic guide for empirical modeling. By passing from the discrete Fourier series representation, utilized for the numerical circulation model, to a continuous Fourier integral representation, explicit waves are obtained for the thermospheric response times. The response times are altitude and species dependent and can exceed two days below 200 km. Thus, for certain storm scenarios, pronounced source memory signatures for the composition and temperature are predicted. Response times obtained from the formulation are shown to give a response consistent with previously published neutral composition data from AE-C for the February 1974 storm when an ap dependent heat source is employed.

Porter, H. S.↗

Structural sensitivity analysis: Methods, applications, and needs

Some innovative techniques applicable to sensitivity analysis of discretized structural systems are reviewed. These techniques include a finite-difference step-size selection algorithm, a method for derivatives of iterative solutions, a Green's function technique for derivatives of transient response, a simultaneous calculation of temperatures and their derivatives, derivatives with respect to shape, and derivatives of optimum designs with respect to problem parameters. Computerized implementations of sensitivity analysis and applications of sensitivity derivatives are also discussed. Finally, some of the critical needs in the structural sensitivity area are indicated along with Langley plans for dealing with some of these needs.

Adelman, H. M.↗

Analytic Thermoelectric Couple Modeling: Variable Material Properties and Transient Operation

To gain a deeper understanding of the operation of a thermoelectric couple a set of analytic solutions have been derived for a variable material property couple and a transient couple. Using an analytic approach, as opposed to commonly used numerical techniques, results in a set of useful design guidelines. These guidelines can serve as useful starting conditions for further numerical studies, or can serve as design rules for lab built couples. The analytic modeling considers two cases and accounts for 1) material properties which vary with temperature and 2) transient operation of a couple. The variable material property case was handled by means of an asymptotic expansion, which allows for insight into the influence of temperature dependence on different material properties. The variable property work demonstrated the important fact that materials with identical average Figure of Merits can lead to different conversion efficiencies due to temperature dependence of the properties. The transient couple was investigated through a Greens function approach; several transient boundary conditions were investigated. The transient work introduces several new design considerations which are not captured by the classic steady state analysis. The work helps to assist in designing couples for optimal performance, and also helps assist in material selection.

Seebeck Effect↗

High T{sub c} in cuprates as a universal property of the electron–phonon system

The Eliashberg theory, which is generalized due to peculiar properties of the finite-width electron band for electron–phonon (EP) systems with a variable electron density of states (DOS), as well as with allowance for the electron–hole nonequivalence of the frequency behavior of the chemical potential renormalization depending on the doping level and electron correlations in the vertex function, is used to study T{sub c} in cuprates. The phonon contribution to the nodal anomalous electron Green’s function (GF) is considered. Pairing within the total width of the electron band, and not only in a narrow layer at the Fermi surface, is taken into account. The calculated frequency and temperature dependences, as well as the dependence on the doping level of the complex renormalization ReZ, ImZ of the mass, complex renormalization Reχ(ω), Imχ(ω) of the chemical potential, and DOS N(ε) renormalized due to the EP interaction are used to calculate the electron nodal anomalous GF. It is found that the effect of suppressing the high-frequency contribution to the Eliashberg equations derived anew for the EP system with a finite width of the electron band is a decisive factor for the manifestation of the effect of high-temperature superconductivity (HTSC). It is shown that in the vicinity of the optimal hole-type doping level in cuprates, the high value of T{sub c} is reproduced by the spectral function of the electron–phonon interaction, which is obtained from tunneling experiments. Upon an increase in the doping level, leading to an increase in the degree of electron–hole nonequivalence, the new logarithmic term appearing in the equations for T{sub c} has a tendency to increase T{sub c}, while intensification of damping of charge carriers (especially suppression of the cutoff factor) leads to a decrease in T{sub c}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unsteady three-dimensional thermal field prediction in turbine blades using nonlinear BEM

A time-and-space accurate and computationally efficient fully three dimensional unsteady temperature field analysis computer code has been developed for truly arbitrary configurations. It uses boundary element method (BEM) formulation based on an unsteady Green's function approach, multi-point Gaussian quadrature spatial integration on each panel, and a highly clustered time-step integration. The code accepts either temperatures or heat fluxes as boundary conditions that can vary in time on a point-by-point basis. Comparisons of the BEM numerical results and known analytical unsteady results for simple shapes demonstrate very high accuracy and reliability of the algorithm. An example of computed three dimensional temperature and heat flux fields in a realistically shaped internally cooled turbine blade is also discussed.

Martin, Thomas J.↗

Critical temperature of metallic hydrogen sulfide at 225-GPa pressure

The Eliashberg theory generalized for electron—phonon systems with a nonconstant density of electron states and with allowance made for the frequency behavior of the electron mass and chemical potential renormalizations is used to study T{sub c} in the SH{sub 3} phase of hydrogen sulfide under pressure. The phonon contribution to the anomalous electron Green’s function is considered. The pairing within the total width of the electron band and not only in a narrow layer near the Fermi surface is taken into account. The frequency and temperature dependences of the complex mass renormalization ReZ(ω), the density of states N(ε) renormalized by the electron—phonon interactions, and the electron—phonon spectral function obtained computationally are used to calculate the anomalous electron Green’s function. A generalized Eliashberg equation with a variable density of electron states has been solved. The frequency dependence of the real and imaginary parts of the order parameter in the SH{sub 3} phase has been obtained. The value of T{sub c} ≈ 177 K in the SH{sub 3} phase of hydrogen sulfide at pressure P = 225 GPa has been determined by solving the system of Eliashberg equations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Green's Function Wind Turbine Induction Model That Incorporates Complex Inflow Conditions

ABSTRACT In this work, we develop a new analytical turbine induction model that can incorporate complex inflow conditions including cases where the wind velocity and temperature profiles can vary as functions of height. This induction model is derived from the linearized Navier–Stokes and leads to a second‐order ODE that can be solved using a Green's function formulation. The corresponding Green's function for several configurations are found including the infinite domain, semi‐infinite domain with ground plane, and a power law velocity inflow profile. The results of this approach are then compared with simulations of the turbine induction field using the AMR‐Wind CFD solver with a uniformly loaded actuator disk model. These comparisons show that the Green's function approach captures the centerline blockage, three‐dimensional blockage flow field, and streamwise velocity slow down, with very good agreement for lower thrust conditions and at larger distances away from rotor disk. The effects of shear on the turbine blockage were also compared using a power law inflow profile, and we show that this approach matches the CFD predictions for the cases considered.

17 WIND ENERGY↗

The dominant contribution of Southern Ocean heat uptake to time - evolving radiative feedback in CESM

Radiative feedbacks are found to vary with time in both historical records and future warming projections. Previous studies proposed two factors that determine the variation of radiative feedbacks: (i) the evolution of tropical sea surface warming patterns and (ii) the tropical-extratropical contrast of ocean heat uptake. Our results bridge the two factors by evaluating the remote impact from the extratropical ocean on tropical temperature patterns, accounting for the changes in radiative feedbacks. Based on the Green’s Function approach that quantifies the non-local contributions of regional ocean heat uptake, we show that the net radiative feedback evolution in CESM can be mostly attributed to the heat uptake variations in the Southern Ocean. The enhanced surface warming associated with the weakened heat uptake decades after quadrupling CO2 is not confined over the Southern Ocean, but extends to tropical Southeastern Pacific, which leads to decreasing tropospheric stability and more positive cloud feedbacks.

Lin, Yuan-Jen↗

Infrared conductivity of cuprates using Yang-Rice-Zhang ansatz: Review of our recent investigations

A review of our recent investigations related to the ac transport properties in the psedogapped state of cuprate high temperature superconductors is presented. For our theoretical calculations we use a phenomenological Green’s function proposed by Yang, Rice and Zhang (YRZ). This is based upon the renormalized mean-field theory of the Hubbard model and takes into account the strong electron-electron interaction present in Cuprates. The pseudogap is also taken into account through a proposed self energy. We have tested the form of the Green’s function by computing ac conductivity of cuprates and then compared with experimental results. We found agreement between theory and experiment in reproducing the doping evolution of ac conductivity but there is a problem with absolute magnitudes and their frequency dependence. This shows a partial success of the YRZ ansatz. The ways to rectify it are suggested and worked out.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coherent Superconductivity with a Large Gap Ratio from Incoherent Metals

Here, a mysterious incoherent metallic (IM) normal state with T-linear resistivity is ubiquitous among strongly correlated superconductors. Recent progress with microscopic models exhibiting IM transport has presented the opportunity for us to study new models that exhibit direct transitions into a superconducting state out of IM states within the framework of connected Sachdev-Ye-Kitaev “quantum dots.” Here, local Sachdev-Ye-Kitaev interactions within a dot produce IM transport in the normal state, while local attractive interactions drive superconductivity. Through explicit calculations, we find two features of superconductivity arising from an IM normal state. First, despite the absence of quasiparticles in the normal state, the superconducting state still exhibits coherent superfluid transport. Second, the nonquasiparticle nature of the IM Green’s functions produces a large enhancement in the ratio of the zero-temperature superconducting gap Δ and transition temperature T SC , 2Δ/T SC , with respect to its BCS value of 3.53.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Global Analysis of Empirical Relationships Between Annual Climate and Seasonality of NDVI

This study describes the use of satellite data to calibrate a new climate-vegetation greenness function for global change studies. We examined statistical relationships between annual climate indexes (temperature, precipitation, and surface radiation) and seasonal attributes of the AVHRR Normalized Difference Vegetation Index (NDVI) time series for the mid-1980s in order to refine our empirical understanding of intraannual patterns and global abiotic controls on natural vegetation dynamics. Multiple linear regression results using global l(sup o) gridded data sets suggest that three climate indexes: growing degree days, annual precipitation total, and an annual moisture index together can account to 70-80 percent of the variation in the NDVI seasonal extremes (maximum and minimum values) for the calibration year 1984. Inclusion of the same climate index values from the previous year explained no significant additional portion of the global scale variation in NDVI seasonal extremes. The monthly timing of NDVI extremes was closely associated with seasonal patterns in maximum and minimum temperature and rainfall, with lag times of 1 to 2 months. We separated well-drained areas from l(sup o) grid cells mapped as greater than 25 percent inundated coverage for estimation of both the magnitude and timing of seasonal NDVI maximum values. Predicted monthly NDVI, derived from our climate-based regression equations and Fourier smoothing algorithms, shows good agreement with observed NDVI at a series of ecosystem test locations from around the globe. Regions in which NDVI seasonal extremes were not accurately predicted are mainly high latitude ecosystems and other remote locations where climate station data are sparse.

Potter, C. S.↗

Wide ranging equation of state with Tartarus: A hybrid Green’s function/orbital based average atom code

Average atom models are widely used to make equation of state tables and for calculating other properties of materials over a wide range of conditions, from zero temperature isolated atom to fully ionized free electron gases. The numerical challenge of making these density functional theory based models work for any temperature, density or nuclear species is formidable. Here we present in detail a hybrid Green’s function/orbital based approach that has proved to be stable and accurate for wide ranging conditions. Algorithmic strategies are discussed. In particular the decomposition of the electron density into numerically advantageous parts is presented and a robust and rapid self consistent field method based on a quasi-Newton algorithm is given. Example application to the equation of state of lutetium (Z = 71) is explored in detail, including the effect of relativity, finite temperature exchange and correlation, and a comparison to a less approximate method. Furthermore, the hybrid scheme is found to be numerically stable and accurate for lutetium over at least 6 orders of magnitude in density and 5 orders of magnitude in temperature.

74 ATOMIC AND MOLECULAR PHYSICS↗

Exploring the effects of molecular beam epitaxy growth characteristics on the temperature performance of state-of-the-art terahertz quantum cascade lasers

This study conducts a comparative analysis, using non-equilibrium Green’s functions (NEGF), of two state-of-the-art two-well (TW) Terahertz Quantum Cascade Lasers (THz QCLs) supporting clean 3-level systems. The devices have nearly identical parameters and the NEGF calculations with an abrupt-interface roughness height of 0.12 nm predict a maximum operating temperature (T max ) of ~ 250 K for both devices. However, experimentally, one device reaches a T max of ~ 250 K and the other a T max of only ~ 134 K. Both devices were fabricated and measured under identical conditions in the same laboratory, with high quality processes as verified by reference devices. The main difference between the two devices is that they were grown in different MBE reactors. Our NEGF-based analysis considered all parameters related to MBE growth, including the maximum estimated variation in aluminum content, growth rate, doping density, background doping, and abrupt-interface roughness height. From our NEGF calculations it is evident that the sole parameter to which a drastic drop in T max could be attributed is the abrupt-interface roughness height. We can also learn from the simulations that both devices exhibit high-quality interfaces, with one having an abrupt-interface roughness height of approximately an atomic layer and the other approximately a monolayer. However, these small differences in interface sharpness are the cause of the large performance discrepancy. This underscores the sensitivity of device performance to interface roughness and emphasizes its strategic role in achieving higher operating temperatures for THz QCLs. We suggest Atom Probe Tomography (APT) as a path to analyze and measure the (graded)-interfaces roughness (IFR) parameters for THz QCLs, and subsequently as a design tool for higher performance THz QCLs, as was done for mid-IR QCLs. Our study not only addresses challenges faced by other groups in reproducing the record T max of ~ 250 K and ~ 261 K but also proposes a systematic pathway for further improving the temperature performance of THz QCLs beyond the state-of-the-art.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polarity dependent heating at the phase interface in metal-insulator transitions

We show that in a model of a metal photoexcited by a transient pump pulse resonant with a phonon mode, the absolute dc conductivity may become negative, depending on the interplay between the electronic structure, the phonon frequency, and the pump intensity. The analysis includes the effects of inelastic scattering and thermal relaxation. Results for the time evolution of the negative conductivity state are presented; the associated nonequilibrium physics may persist for long times after the pulse. Furthermore, our findings provide a theoretical justification for previously proposed phenomenology and indicate new routes to the generation and exploration of intrinsically nonequilibrium states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic topography and gravity anomalies for fluid layers whose viscosity varies exponentially with depth

Adopting the formalism of Parsons and Daly (1983), analytical integral equations (Green's function integrals) are derived which relate gravity anomalies and dynamic boundary topography with temperature as a function of wavenumber for a fluid layer whose viscosity varies exponentially with depth. In the earth, such a viscosity profile may be found in the asthenosphere, where the large thermal gradient leads to exponential decrease of viscosity with depth, the effects of a pressure increase being small in comparison. It is shown that, when viscosity varies rapidly, topography kernels for both the surface and bottom boundaries (and hence the gravity kernel) are strongly affected at all wavelengths.

Revenaugh, Justin↗