Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Observation of two cascading screening processes in an iron-based superconductor

Understanding how renormalized quasiparticles emerge in strongly correlated electron materials provides a challenge for both experiment and theory. It has been predicted that distinctive spin and orbital screening mechanisms drive this process in multiorbital materials with strong Coulomb and Hund’s interactions. Here, we provide the experimental evidence of both mechanisms from angle- resolved photoemission spectroscopy on RbFe 2 As 2 . We observe that the emergence of low-energy Fe 3d xy quasiparticles below 90K coincides with spin screening. A second process changes the spectral weight at high energies up to room temperature. Supported by theoretical calculations we attribute it to orbital screening of Fe 3d atomic excitations. These two cascading screening processes drive the temperature evolution from a bad metal to a correlated Fermi liquid.

Condensed-matter physics↗
DOE OSTI2020

Giant spin Seebeck effect through an interface organic semiconductor

Interfacing an organic semiconductor C 60 with a non-magnetic metallic thin film (Cu or Pt) has created a novel heterostructure that is ferromagnetic at ambient temperature, while its interface with a magnetic metal (Fe or Co) can tune the anisotropic magnetic surface property of the material. Here, we demonstrate that sandwiching C60 in between a magnetic insulator (Y 3 Fe 5 O 12 :YIG) and a non-magnetic, strong spin–orbit metal (Pt) promotes highly efficient spin current transport via the thermally driven spin Seebeck effect (SSE). Experiments and first principles calculations consistently show that the presence of C 60 reduces significantly the conductivity mismatch between YIG and Pt and the surface perpendicular magnetic anisotropy of YIG, giving rise to enhanced spin mixing conductance across YIG/C 60 /Pt interfaces. As a result, a 600% increase in the SSE voltage (V LSSE ) has been realized in YIG/C 60 /Pt relative to YIG/Pt. Temperature-dependent SSE voltage measurements on YIG/C 60 /Pt with varying C 60 layer thicknesses also show an exponential increase in V LSSE at low temperatures below 200 K, resembling the temperature evolution of spin diffusion length of C 60 . Our report emphasizes the important roles of the magnetic anisotropy and the spin diffusion length of the intermediate layer in the SSE in YIG/C 60 /Pt structures, providing a new pathway for developing novel spin-caloric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A collective elastic fluctuation mechanism for decoupling and stretched relaxation in glassy colloidal and molecular liquids

We propose a microscopic theory for the decoupling of self-diffusion and structural relaxation in glass-forming liquids within the Elastically Collective Nonlinear Langevin Equation (ECNLE) activated dynamics framework. Our central hypothesis is that the heterogeneity relevant to this problem is static fluctuations of local density on the scale of 3–4 particle diameters and how this changes local packing correlations. These fluctuations modify the degree of dynamical cage expansion that mechanistically couples intracage large amplitude hopping and longer range collective elasticity in ECNLE theory. Decoupling only emerges in the deeply supercooled regime where the strongly temperature dependent elastic barrier becomes non-negligible relative to its noncooperative local analog. The theory makes predictions for various aspects of the decoupling phenomenon, including apparent fractional power law Stokes-Einstein behavior, that appear to be consistent with experiments and simulations on hard sphere fluids and molecular liquids. Of central importance is a microscopic connection between the barrier fluctuation variance and most probable barrier height. Sensible results are also obtained for the nonexponential stretching of a generic relaxation time correlation function and its temperature evolution. Nonuniversality can arise from the relative importance of the local and collective barriers (related to fragility) and the precise magnitude of the length scale that defines the transition from local cage to elastic physics. Comparison is made with a traplike model based on a Gaussian distribution of barriers.

Xie, Shi-Jie (ORCID:0000000333174720)↗
DOE OSTI2023

Eulerian finite element simulations of the drop weight impact test with a dislocation Density-based continuum model

During a drop weight impact test, the kinetic energy of the falling weight is transferred into the sample resting on the anvil. The plastic deformation in the sample is an important mechanism for the dissipation of the input kinetic energy. We use Eulerian finite element analysis to simulate the deformation and temperature evolution in a 1,3,5-trinitro-1,3,5-triazine (RDX) sample consisting of multiple crystals. In Eulerian finite element simulations, the mesh moves relative to the material. After every change of position between the mesh and the material, the state variables are interpolated to the new mesh position, i.e., advection. In an effort to reduce the advection errors, we use a rate form of a dislocation density-based continuum model by Luscher et al. Here, the simulations predict localization of plastic deformation, and plastic dissipation as a significant source of heat generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Femtosecond diffraction studies of the sodium chloride phase diagram under laser shock compression

The phase diagram of sodium chloride (NaCl) under laser shock compression has been studied at Linac Coherent Light Source (LCLS) at the x-ray free-electron laser facility. Both solid–solid (B1 → B2) and solid–liquid (B2 → liquid) transitions have been observed along the Hugoniot over nanosecond time scales. By combining structural measurements through in situ x-ray diffraction, pressure determination through velocimetry, and a thermal equation-of-state, the shock-compressed data are used to constrain the phase diagram of NaCl. Transformation into the B2 phase is found to occur at 28(2) GPa, and B2–liquid coexistence is observed between 54(4) and 66(6) GPa, with near full melt at 66(6) GPa. Late-time pressure release from an initial shocked B2-state results in a B2 → B1 back transformation. Our results show agreement with previous static compression data, suggesting that the time scale for melting is very rapid and that equilibrium states in NaCl are being accessed over nanosecond time scales. Finally, a multiphase equation-of-state description of NaCl incorporated into a one-dimensional hydrocode is used to interpret pressure and temperature evolution over these rapid time scales.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Experimental study on the startup of the annular wick type heat pipe using fiber optical temperature measurement technique

This study used optical fiber-distributed temperature sensors to measure the internal and external temperature distributions of a water-cooled heat pipe. The sensor technology used in this study is fiber optical distributed temperature sensing, a distributed sensing technique based on the naturally occurring Rayleigh backscatter in optical fibers. This measurement technique provides maximum spatial resolution for static and semi-static applications. Using this sensor, the temperature distribution of the heat pipe's internal, external, vapor core, and the wick was measured with a spatial resolution of 0.65 mm, a sampling frequency of 40 Hz, and a temperature resolution of 0.1 °C. Through the measured temperature distribution database, the starting phenomenon, the effective length trend, and the limitation onset were observed. From the results, it is found that a high-temperature peak appears at the evaporator if a high initial power (75 W) is imposed on the heat pipe, even after the heat pipe approaches the normal operating status. The peak is not observed in a slower startup (30 W initial power then slowly increased to 75 W). It is also found that the temperature distributions and effective condenser length of the heat pipe highly depend on the cooling conditions. There are variations in the temperature according to the radial direction of the horizontal heat pipe due to gravity. In conclusion, lead and lag of the temperature evolution were observed at the onset of the operating limitations.

42 ENGINEERING↗
DOE OSTI2023

Evaluation of the relative importance of preheat from hohlraum x rays and a radiative shock on a low-density foam

Indirectly driven shock-tube experiments were performed on the Omega Laser Facility to evaluate the relative importance of hohlraum x ray and radiative shock preheat sources on a low-density foam. X rays emitted from the hohlraum and a subsequent shock wave are channeled into a low-density foam sample, which contains a plastic preheat-witness disk placed downstream of the foam. Simultaneous radiographic measurements of the shock speed in the foam and the expansion rate of the witness disk due to preheat allow for the observation of effects from the hohlraum's low-energy and high-energy x-ray spectrum. Here we showed, from simulations, that low-energy x rays from the hohlraum are preferentially absorbed near the ablator surface (where the hohlraum and the shock tube meet), while higher-energy x rays largely pass through the ablator and foam and are volumetrically absorbed by the witness disk. Reproducing the experimentally measured shock speed and expansion of the witness disk simultaneously, we extracted the temperature evolution of preheated foam from the simulation and evaluated the relative importance of preheat sources on a low-density foam from hohlraum x-ray radiation and radiative shock. We found that radiation from the shock front was more effective at preheating the low-density foam than the high-energy x rays from the hohlraum. This shock-tube preheat experiment is important for understanding the results of the MARBLE experiments at the National Ignition Facility because initial conditions of foam-filled MARBLE capsules are sensitive to preheat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Assessing plasma face component thermal response to rotating 3D magnetic fields for SPARC tokamak

Thermal response simulations of plasma-facing components (PFCs) in the SPARC tokamak, performed with the HEAT code, show that three-dimensional (3D) heat loads resulting from stationary n=1 perturbations require highly radiative scenarios, with up to 95% of the power crossing the separatrix (P SOL ) being radiated, to maintain PFC temperatures within acceptable operational limits, whereas the application of slowly rotating 3D fields substantially reduces the thermal loads. The HEAT module, developed to predict heat loads from non-axisymmetric plasmas, is extended to model time-dependent heat flux patterns generated by rotating 3D fields, and a comprehensive thermal analysis is performed on PFCs subjected to both the maximum and minimum power loads, as well as to rotating heat flux distributions, to evaluate the temperature evolution for varying perturbation amplitudes and rotation frequencies. The extension of this analysis to 3D fields with toroidal mode number n=2 shows that this configuration leads to weaker localized heat flux peaks relative to the n=1 case, enabling safe operation with less than 80% of the power radiated when static 3D fields of low amplitude are applied, while using slowly rotating fields at higher amplitudes. These results indicate that n=2 perturbations are generally less detrimental to divertor power exhaust, emphasizing the strong dependence of divertor power exhaust on the characteristics of the applied 3D fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Three-Dimensional Heat Flux and Thermal Analysis of Angled Tungsten Samples on DIII-D

ITER-grade tungsten and dispersoid-strengthened tungsten samples with the top surface angled at ~15° towards the incident plasma flux were exposed to 9 H-mode discharges with edge-localized modes (ELMs) in the lower divertor of DIII-D tokamak using the Divertor Material Evaluation System (DiMES). Surface damage included cracking and flaking of material on the two samples farthest away from the plasma strike point, and significant melting of the two samples closest to the strike point. Heat flux and thermal analysis tools new to DIII-D have been applied to better understand this material response and to help optimize the exposure conditions for future experiments. SMITER field-line tracing simulations based on IRTV data and EFIT equilibria estimate an average inter-ELM perpendicular heat flux, 𝑞⊥,𝑖nter−𝐸LM , on the angled surfaces of 10.1 – 19.6 MW/m² for a majority of the 9 discharges, increasing to 15.6 – 24.5 MW/m² for the single, higher-power shot where samples melted. Fast camera data showed shallow intra-ELM melting and re-solidification, which transitioned to bulk inter-ELM melting with melt motion in the 𝐽⃗ 𝑥 𝐵⃗ direction. About 50% of the protruding volume of the most affected sample was displaced via melt-motion. SIERRA thermal modeling software was able to reproduce an onset time of melting consistent with fast camera data and final sample conditions, within < 200 ms. Maximum surface temperatures of 3122 K and 2787 K are estimated for the samples farthest away from the strike point, while the closest samples achieve melting at 4067 ms and 4750 ms into the ~5000 ms plasma exposure. A +10% increase in both the SMITER 𝑞⊥,𝑖nter−𝐸LM calculations and the estimated ELM heat loads 𝑞⊥, 𝐸LM was required to achieve this result, which is within the uncertainty of the diagnostic data but likely accounts for non-ideal geometry effects plus other physics uncertainties not included in this first iteration of modeling. This work provided valuable estimates of the 3D temperature evolution to help better understand the observed surface morphology and internal recrystallization of samples, which are discussed in detail in a complementary manuscript [1]. Benchmarking efforts with more diagnosed DIII-D experiments are underway to further refine the SMITER and SIERRA models for DiMES. Future use of these tools will enable researchers to precisely target heat flux exposure conditions in DIII-D to test, but not exceed, the thermomechanical limitations of novel plasma-facing materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Global perspectives of the bulk electronic structure of URu 2 Si 2 from angle-resolved photoemission

Previous high-resolution angle-resolved photoemission (ARPES) studies of URu 2 Si 2 have characterized the temperature-dependent behavior of narrow-band states close to the Fermi level ( E F ) at low photon energies near the zone center, with an emphasis on electronic reconstruction due to Brillouin zone folding. A substantial challenge to a proper description is that these states interact with other hole-band states that are generally absent from bulk-sensitive soft x-ray ARPES measurements. Here we provide a more global k -space context for the presence of such states and their relation to the bulk Fermi surface (FS) topology using synchrotron-based wide-angle and photon energy-dependent ARPES mapping of the electronic structure using photon energies intermediate between the low-energy regime and the high-energy soft x-ray regime. Small-spot spatial dependence, f -resonant photoemission, Si 2 p core-levels, x-ray polarization, surface-dosing modification, and theoretical surface slab calculations are employed to assist identification of bulk versus surface state character of the E F -crossing bands and their relation to specific U- or Si-terminations of the cleaved surface. The bulk FS topology is critically compared to density functional theory (DFT) and to dynamical mean field theory calculations. In addition to clarifying some aspects of the previously measured high symmetry Γ, Z and X points, incommensurate 0.6 a * nested Fermi-edge states located along Z – N – Z are found to be distinctly different from the DFT FS prediction. The temperature evolution of these states above T HO , combined with a more detailed theoretical investigation of this region, suggests a key role of the N -point in the hidden order transition.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic terahertz resonances above the Néel temperature in the frustrated kagome antiferromagnet averievite

Time-domain magneto-THz spectroscopy is utilized to study the frustrated magnet averievite Cu 5–x Zn x V 2 O 10 (CsCl). Pronounced THz resonances are observed in unsubstituted samples (x = 0) when cooling below the onset of short-range magnetic correlations. The influence of external magnetic effects confirms the magnetic origin of these resonances. Increasing Zn substitution suppresses the resonances, as frustration effects dominate, reflecting the nonmagnetic phases for x > 0.25 compounds. The temperature evolution of the THz spectra is complemented with electron spin resonance spectroscopy. This comparison allows a direct probe of the different contributions from magnetic order, frustration, and structural properties in the phase diagram of averievite. Furthermore, our results illustrate the effect of magnetic interactions in THz spectra of frustrated magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Role of orbital selectivity on crystal structures and electronic states in BiMnO 3 and LaMnO 3 perovskites

Correlated oxides, such as BiMnO 3 and LaMnO 3 , show a complex interplay of electronic correlations and crystal structure exhibiting multiple first-order phase transitions, some without a clear order parameter. The quantitative theoretical description of this temperature-dependent electronic-structural interplay in the vicinity of a Mott transition is still a challenge. Here we address this issue by simultaneously considering both structural and electronic degrees of freedom, within a self-consistent density functional theory with embedded dynamical mean field theory. Our results show the existence of novel electronic states characterized by the coexistence of insulating, semimetallic, and metallic orbitals. This state is in agreement with resonant x-ray scattering. Here we also show that electronic entropy plays a decisive role in both electronic and structural phase transitions. By self-consistent determination of both the electronic state and the corresponding crystal structure, we show that the temperature evolution of these phases can be quantitatively explained from first principles, thus demonstrating the predictive power of the theoretical method for both the structural and the electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Probing putative orbital differentiation effects via Eu 2+ spin dynamics in Sr 1-x Eu x Fe 2 As 2

Here, in this work, we report x-ray powder diffraction, elemental analysis, electrical resistivity, magnetic susceptibility, specific heat, and electron spin resonance (ESR) in single crystals of Sr 1-x Eu x Fe 2 As 2 . We observed a breakdown of the previously reported scaling between the Eu 2+ Korringa relaxation rate obtained from ESR and the spin density wave temperature evolution for Sr-rich samples. This result suggests a distinct evolution of the orbital differentiation of the Fe 3d bands along the Sr-based series when compared to the Ba counterpart. We argue that this difference is related to a larger splitting between the structural (tetragonal-to-orthorhombic) and the Fe-driven spin density wave transitions induced by Eu doping in this series. In fact, our results indicate that the two transitions follow an opposite x-Eu dependence for Sr-concentrated samples. Our work shows that Sr 1-x Eu x Fe 2 As 2 series and the comparison with their Ba-based counterparts are exciting platforms to be explored for understanding the interplay among orbital differentiation, magnetism, and structural distortions in the iron pnictides

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Three-dimensional charge density wave in the dual heavy fermion system UPt 2 Si 2

Heavy fermion liquids offer via their Kondo lattice diverse possibilities for exotic ground states. Using variable-temperature atomic pair distribution function analysis, we study the local atomic structure of the "dual" heavy fermion liquid UPt 2 Si 2 , which exhibits antiferromagnetism consistent with localized 5f-electron states and transport properties characteristic to itinerant 5f-"spd" hybridized electron systems. We show that UPt 2 Si 2 exhibits periodic lattice distortions (PLDs) involving both uranium and platinum atoms that are characteristic to three-dimensional charge density waves. Here, the temperature evolution of the PLDs tracks that of the transport and magnetic properties, suggesting the presence of little-known 5f-electron-lattice interactions. We argue that PLDs in heavy fermion liquids in general, and in particular in UPt 2 Si 2 , appear as new degrees of freedom that entangle competing electronic states and, as such, must be accounted for when their rich physics is considered.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Coupled heat pulse propagation in two-fluid plasmas

Because of the large mass differences between electrons and ions, the heat diffusion in electron-ion plasmas exhibits more complex behavior than simple heat diffusion found in typical gas mixtures. In particular, heat is diffused in two distinct, but coupled, channels. Conventional single fluid models neglect the resulting complexity, and can often inaccurately interpret the results of heat pulse experiments. However, by recognizing the sensitivity of the electron temperature evolution to the ion diffusivity, not only can previous experiments be interpreted correctly, but informative simultaneous measurements can be made of both ion and electron heat channels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Dichotomy of flat bands in the van der Waals ferromagnet Fe 5 ⁢GeTe 2

Quantum materials with bands of narrow bandwidth near the Fermi level represent a promising platform for exploring a diverse range of fascinating physical phenomena, as the high density of states within the small energy window often enables the emergence of many-body physics. On one hand, flat bands can arise from strong Coulomb interactions that localize atomic orbitals. On the other hand, quantum destructive interference can quench the electronic kinetic energy. Although both have a narrow bandwidth, the two types of flat bands should exhibit very distinct spectral properties arising from their distinctive origins. So far, the two types of flat bands have only been realized in very different material settings and chemical environments, preventing a direct comparison. Here, in this study, we report the observation of the two types of flat bands within the same material system—an above-room-temperature van der Waals ferromagnet, Fe 5−x GeTe 2 , distinguishable by a switchable iron site order. The contrasting nature of the flat bands is also identified by the remarkably distinctive temperature evolution of the spectral features, indicating that one arises from electron correlations in the Fe(1) site-disordered phase, while the other geometrical frustration in the Fe(1) site-ordered phase. Our results therefore provide a direct juxtaposition of the distinct formation mechanism of flat bands in quantum materials and an avenue for understanding the distinctive roles flat bands play in the presence of magnetism, topology, and lattice geometrical frustration, utilizing sublattice ordering as a key control parameter.

Wu, Han [Rice Univ., Houston, TX (United States)] ↗
DOE OSTI2025

Optical conductivity study of mixed-valent quasi-one-dimensional CeIr 3 ⁢B 2

Here, we present a combined theoretical and experimental study on the optical conductivity of CeIr 3 ⁢B 2 , where quasi-one-dimensional Ce chains form along the 𝑐 axis of the monoclinic crystal. Significant hybridization-induced features are observed along the Ce chains by broadband infrared spectroscopy, demonstrating mixed-valent behavior over a wide range of temperatures (6–300 K) and energies (up to 0.8 eV). The ferromagnetic transition at 41 K had no noticeable influence on the temperature evolution of the optical conductivity. A comparison with density functional theory plus dynamic mean-field theory calculations demonstrates the quasi-one-dimensional nature of CeIr 3 ⁢B 2 and the local character of the interactions responsible for the electronic renormalization. Furthermore, we demonstrate how the spectroscopic signatures of this mixed-valent compound are captured by theory, providing a clear distinction from the response expected in the integer-valent Kondo regime.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ultra-compact hybrid silicon:chalcogenide waveguide temperature sensor

We demonstrate a real-time, reusable, and reversible integrated optical sensor for temperature monitoring within harsh environments. The sensor architecture combines the phase change property of chalcogenide glasses (ChG) with the high-density integration advantages of high index silicon waveguides. To demonstrate sensor feasibility, ChG composition Ge 40 S 60 , which is characterized by a sharp phase transition from amorphous to crystalline phase around 415 °C, is deposited over a 50 µ m section of a single mode optical waveguide. The phase transition changes the behavior of Ge 40 S 60 from a low loss to high loss material, thus significantly affecting the hybrid waveguide loss around the phase transition temperature. A transmission power drop of over 40dB in the crystalline phase compared to the amorphous phase is experimentally measured. Moreover, we recover the amorphous phase through the application of an electrical pulse, thus showing the reversible nature of our compact temperature sensor. Through integrating multiple compositions of ChG with well-defined phases transition temperatures over a silicon waveguide array, it is possible to determine, in real-time, the temperature evolution within a harsh environment, such as within a nuclear reactor cladding.

Badamchi, Bahareh (ORCID:0000000193105300)↗