Search NASA⌕ Search

SEARCH · Search NASA

Results for “Terminal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Optimal interconnection of three-terminal tandem solar cells

Three-terminal (3T) tandem solar cells require an adapted module integration scheme in order to explore their full efficiency potential. The three terminals allow to extract the power of the top and bottom cell separately. In a cell string, the wide bandgap top cells are interconnected in parallel to multiple bottom cells resulting in a parallel/series interconnection. This interconnection scheme affects the operation of the subcells, the resulting current path between the subcells, the layout of the cell interconnects, and the system level. Here, we analyze by simulations and experiments the aspects of the module integration of series- and reverse-connected 3T cells with their practical impact on module processes and performance as well as the effect of varying voltage ratios on the string-end losses. If the subcells are connected in series, the module integration requires insulation layers and significantly longer interconnects compared to devices with reverse-connected subcells. Tandem devices with a reverse connection and a voltage ratio between top and bottom cell of 2:1 allow a lean interconnection design and low integration losses. Here, we present an approach for the integration of bypass diodes for the protection against shading effects that allow to minimize string-end and shading losses for a system of modules featuring 3T cells.

14 SOLAR ENERGY↗

N-terminal domain swapping: A new paradigm for spermidine/spermine N -acetyltransferase (SSAT) protein structures?

Enterococcus faecalis is a multi-drug-resistant human pathogen that is found in a variety of environments and is challenging to treat. Under stress conditions, some bacteria regulate intracellular polyamine concentrations via polyamine acetyltransferases to reduce their toxicity. The E. faecalis genome encodes two polyamine acetyltransferases: PmvE and BltD. Both of these proteins belong to the Gcn5-related N-acetyltransferase (GNAT) superfamily. It is unclear why there are two enzymes with similar substrate specificities in this organism. To better understand the structure/function relationship of the E. faecalis BltD enzyme, we determined its crystal structure and performed additional assays to explore its oligomeric state and enzymatic activity. The goal was to determine whether there were structural or catalytic differences between this enzyme and other polyamine acetyltransferases that could explain this redundancy and be exploited for future development of targeted inhibitors for this important human pathogen. We found the BltD enzyme was structurally unique due to its N-terminal domain swapped dimer. However, this enzyme adopts a catalytically active monomer rather than dimer in solution. This indicates the crystal structure we obtained may represent a state that forms at high protein and salt concentrations and at low pH used during crystallization. The BltD dimer found in the crystal may represent a unique view of how an inhibitory peptide or molecule could be designed to occupy its active site. Additionally, this structure shows the extensive flexibility of the N-terminal portion of the E. faecalis BltD enzyme.

59 BASIC BIOLOGICAL SCIENCES↗

Targeted Writing and Deleting of Magnetic Skyrmions in Two-Terminal Nanowire Devices

Controllable writing and deleting of nanoscale magnetic skyrmions are key requirements for their use as information carriers for next-generation memory and computing technologies. While several schemes have been proposed, they require complex fabrication techniques or precisely tailored electrical inputs, which limits their long-term scalability. In this work, we demonstrate an alternative approach for writing and deleting skyrmions using conventional electrical pulses within a simple, two-terminal wire geometry. X-ray microscopy experiments and micromagnetic simulations establish the observed skyrmion creation and annihilation as arising from Joule heating and Oersted field effects of the current pulses, respectively. The unique characteristics of these writing and deleting schemes, such as spatial and temporal selectivity, together with the simplicity of the two-terminal device architecture, provide a flexible and scalable route to the viable applications of skyrmions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Surface Terminations of 2D Bi 2 WO 6 on Photocatalytic Hydrogen Evolution from Water Splitting

Two-dimensional (2D)-structured photocatalysts with atomically thin layers not only have the potential to enhance hydrogen generation efficiency but also allow more direct investigations of the effects of surface terminations on photocatalytic activity. In this work, taking 2D Bi 2 WO 6 as a model, we found that the configuration of bilayer Bi 2 O 2 sandwiched by alternating WO 4 layers enabled the thermodynamic driving potential for photocatalytic hydrogen evolution. Without Pt deposition, the H 2 generation efficiency can reach to 56.9 μmol/g/h by 2D Bi 2 WO 6 as compared with no activity of Bi 2 WO 6 nanocrystals under simulated solar light. This configuration is easily functionalized by adsorption of Cl – /Br – to form Bi–Cl/Bi–Br bonds, which leads to the decrease of recombination in photogenerated charge carriers and narrower band gaps. This work highlights an effective way to design photocatalysts with efficient hydrogen evolution by tuning the surface terminations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-healing Growth of LaNiO 3 on a Mixed-Terminated Perovskite Surface

Developing atomic-scale synthesis control is a prerequisite for understanding and engineering the exotic physics inherent to transition-metal oxide heterostructures. Thus, far, however, the number of materials systems explored has been extremely limited, particularly with regard to the crystalline substrate, which is routinely SrTiO 3 . Here, we investigate the growth of a rare-earth nickelate-LaNiO 3 -on (LaAlO 3 )(Sr 2 AlTaO 6 ) (LSAT) (001) by oxide molecular beam epitaxy (MBE). Whereas the LSAT substrates are smooth, they do not exhibit the single surface termination usually assumed necessary for control over the interface structure. Performing both nonresonant and resonant anomalous in situ synchrotron surface X-ray scattering during MBE growth, we show that reproducible heterostructures can be achieved regardless of both the mixed surface termination and the layer-by-layer deposition sequence. The rearrangement of the layers occurs dynamically during growth, resulting in the fabrication of high-quality LaNiO 3 /LSAT heterostructures with a sharp and consistent interfacial structure. This is due to the thermodynamics of the deposition window as well as the nature of the chemical species at interfaces-here, the flexible charge state of nickel at the oxide surface. This has important implications regarding the use of a wider variety of substrates for fundamental studies on complex oxide synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unequal {110} Facets: The Potential Role of Intraparticle Heterogeneity and Facet Termination in Photoelectrochemical Activity of Single BiVO 4 Particles

BiVO 4 photoanodes are promising for solar water splitting, with photogenerated electrons and holes preferentially reacting at top {010} and lateral {110} facets, respectively. However, the mechanisms driving this facet-dependent reactivity remain unclear. Here, in this study, we investigate facet-dependent photocurrent and material heterogeneity using correlative scanning photoelectrochemical microscopy (SPCM), electron beam induced current (EBIC) mapping, and mid-IR scattering scanning near-field optical microscopy (s-SNOM). SPCM measurements of 62 BiVO 4 particles confirmed higher photocurrents at lateral {110} facets compared to top {010} facets, but unexpectedly revealed variations in photocurrent among lateral facets within the same particle. Variations in lateral facet surface termination could explain the intraparticle-level reactivity heterogeneity, consistent with theoretical predictions. Nano-FTIR spectroscopy and Raman microspectroscopy indicated significant materials chemistry heterogeneity within individual particles and facets that could be attributed to variations in lattice vibration distortions that enhance the overlap between Bi 6s and O 2p orbitals. The increased orbital overlap is significant as it potentially increases hole mobility in the valence band and potentially explains the lateral facet-dependent charge separation efficiency observed in photocurrent maps. Facet-dependent electrical and EBIC measurements showed no space charge regions at interfacet junctions or metal-BiVO 4 contacts under vacuum, suggesting that photogenerated holes beneath top {010} facets are unlikely to transport to lateral {110} facets to drive water/sulfite oxidation. These findings indicate the potential influence of distinct bulk properties and surface termination chemistries across different particles and facets, highlighting the importance of carefully controlling defects and surface chemistry during sample growth to optimize photocatalytic performance.

BiVO4↗

Homogenous Voltage-Matched Strings Using Three-Terminal Tandem Solar Cells: Fundamentals and End Losses

Strings constructed from three-terminal tandem (3TT) solar cells offer the performance benefits of voltage-matching (which reduces sensitivity to spectral variation), but without the subcell voltage isolation required by four-terminal cells. However, the circuitry for a 3TT string can become complex, making circuit analysis more challenging. Here, we illustrate the essential features of “homogenous” voltage-matched (VM) 3TT strings, for which all 3TT cells in the string are nominally identical (with the same design/doping sequence, such that they can be fabricated on the same manufacturing line). Several representative VM string configurations are explicitly considered, and used to describe the general construction of string I(V) curves. End losses intrinsic to these strings are discussed in detail, along with mitigation strategies to minimize their impact. Our analysis agrees with experimental results for eight-cell strings constructed from GaInP/GaAs 3TT devices.

14 SOLAR ENERGY↗

Three-Terminal Bipolar Junction Bottom Cell as Simple as PERC: Towards Lean Tandem Cell Processing

Silicon-based tandem cells are a potential upgrade for the dominating PERC technology and can greatly increase the conversion efficiency. A novel approach, the three-terminal (3T) tandem using interdigitated back-contact (IBC) cells, was shown to combine the advantages of four- and two-terminal tandem cells at the expense of a more complex bottom cell fabrication process. In this paper, we propose a simplified and lean PERC-like 3T bipolar junction bottom cell featuring two minority-carrier selective contacts and a single majority-carrier selective contact, and thus resembling a bipolar junction transistor architecture. We present the lean PERC-like fabrication process and explain the working principle by using current-voltage measurements of illuminated 3T IBC cells.

14 SOLAR ENERGY↗

Fundamentals of Three-Terminal Tandem Solar Cells: a Comprehensive Taxonomy

Three-terminal tandem (3TT) solar cells can overcome some of the limitations of two- and four-terminal tandem designs. However, the coupled nature of the cells adds a degree of complexity to the devices themselves and the ways that their performance can be measured and reported. To facilitate understanding, we have developed a taxonomy which encompasses all types of 3TT devices, enabling a common nomenclature for discussing devices and performance. Once the physical devices, contact nodes, and loading circuitry have been self-consistently described, it becomes apparent that a wide range of 3TT devices share a common set of design and operating principles.

3T↗

Inverted GaInP/GaAs Three-Terminal Heterojunction Bipolar Transistor Solar Cell

Here we present the experimental results of an inverted three-terminal heterojunction bipolar transistor solar cell (HBTSC) made of GaInP/GaAs. The inverted growth and processing enables contacting the intermediate layer from the bottom, which increases the cell performance by reducing shadow factor and series resistance at the same time. With this prototype we show that an inverted processing of a three-terminal solar cell is feasible and pave the way for the application of epitaxial lift-off, substrate reuse and mechanical stacking to the HBTSC which can eventually lead to a low-cost high-efficiency III-V-on-Si HBTSC technology.

41 EE - Solar Energy Technologies Office (EE-4S)↗

A Hybrid DC Fault Primary Protection Algorithm for Multi-Terminal HVdc Systems

Protection against dc faults is one of the main technical hurdles faced when operating converter-based HVdc systems. Protection becomes even more challenging for multi-terminal dc (MTdc) systems with more than two terminals/converter stations. In this paper, a hybrid primary fault detection algorithm for MTdc systems is proposed to detect a broad range of failures. Sensor measurements, i.e., line currents and dc reactor voltages measured at local terminals, are first processed by a top-level context clustering algorithm. For each cluster, the best fault detector is selected among a detector pool according to a rule resulting from a learning algorithm. The detector pool consists of several existing detection algorithms, each performing differently across fault scenarios. The proposed hybrid primary detection algorithm: i) offers superior performance compared to an individual detector through a data-driven approach; ii) detects all major fault types including pole-to-pole (P2P), pole-to-ground (P2G), and external dc faults; iii) identifies faults with various fault locations and impedances; iv) is more robust to noisy sensor measurements compared to existing methods; v) does not require exhaustive simulation and sampling for training the model. Performance and effectiveness of the proposed algorithm are evaluated and verified based on time-domain simulations in the PSCAD/EMTDC software environment. The results confirm satisfactory operation, accuracy, and detection speed of the proposed algorithm under various fault scenarios.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Low-Frequency Stability Analysis of Inverter-Based Islanded Multiple-Bus AC Microgrids Based on Terminal Characteristics

For system planning of three-phase inverter-based islanded ac microgrids, the low frequency instability issue caused by interactions of inverter droop controllers is a major concern. When internal control information of procured commercial inverters is unknown, impedance-based small-signal stability criteria facilitate prediction of resonances in medium and high frequency ranges, but they usually assume the grid fundamental frequency as constant and thus they are incapable of analyzing the low-frequency oscillation of the fundamental frequency in islanded microgrids. Aiming at solving this issue, this paper proposes two stability analysis methods based on terminal characteristics of inverters and passive connection network including the dynamics of the fundamental frequency for analysis of low-frequency stability in islanded multiple-bus microgrids. Based on the Component Connection Method (CCM) to systematically separate inverters from the passive connection network, a general approach is developed to model the microgrid as a multiple-input-multiple-output (MIMO) negative feedback system in the common system d-q reference frame. By applying the generalized Nyquist stability criterion (GNC) to the return-ratio and return-difference matrices of the MIMO system model, the low-frequency stability related to the fundamental frequency can be analyzed using the measured terminal characteristics of inverters. Finally, analysis and simulation of a 37-bus microgrid verify the effectiveness of the proposed stability analysis methods.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Pseudomonas aeruginosa C-Terminal Processing Protease CtpA Assembles into a Hexameric Structure That Requires Activation by a Spiral-Shaped Lipoprotein-Binding Partner

Pseudomonas aeruginosa CtpA is a carboxyl-terminal processing protease that partners with the outer membrane lipoprotein LbcA to degrade at least five cell wall-associated proteins, four of which are cell wall hydrolases. This activity plays an important role in supporting P. aeruginosa virulence in a mouse model of acute pneumonia. However, almost nothing is known about the molecular mechanisms underlying CtpA and LbcA function. Here, we used structural analysis to show that CtpA alone assembles into an inactive hexamer comprising a trimer of dimers, which limits its substrate access and prevents nonspecific degradation. The adaptor protein LbcA is a right-handed open spiral with 11 tetratricopeptide repeats, which might wrap around a substrate to deliver it to CtpA for degradation. By structure-guided mutagenesis and functional assays, we also showed that the interfaces of the CtpA trimer of dimers and an N-terminal helix of LbcA are important for LbcA-mediated substrate degradation by CtpA both in vitro and in vivo. This work improves our understanding of the molecular mechanism of the LbcA-CtpA proteolytic system and reveals some striking differences from the arrangements found in some other bacterial CTPs.

structural biology↗

Integration of Omics into a New Comprehensive Rate Law for Competitive Terminal Electron-Accepting Processes in Reactive Transport Models: Application to N, Fe, S, and Contaminant Transformations in Stream and Wetland Sediments

Surface waters represent important sources of alternate energy and drinking water in the United States, and characterizing the biogeochemical processes that affect surface water quality is relevant to the DOE-BER mission. Sediment biogeochemical processes regulate the release of carbon (C), nutrients, and contaminants to surface waters and thus influence water quality. Sediment biogeochemical processes are dynamic and affected by the deposition and remobilization of solid material and changes in environmental conditions driven by water discharge variations. Wetlands are important natural filters of surface waters which may either trap, metabolize, or mobilize nutrients and contaminants. Despite their importance, biogeochemical processes regulating nutrient and contaminant release and C transformation in stream and wetland sediments cannot be predicted accurately by current mathematical models. These reactive transport models largely rely on detectable changes in geochemical conditions to activate metabolic processes, do not accurately account for the competition between microbial processes, and poorly constrain effects of hydrological perturbations on biogeochemical processes. In this BER-SBR exploratory project, metagenomic and geochemical signatures were combined to identify microbially-mediated redox processes in anaerobic stream and wetland sediments from the Savannah River Site (SRS, ANL SFA) and East Fork Poplar Creek (EFPC, ORNL SFA) that play important roles in C, uranium (U), and mercury (Hg) transformations. In addition, sediment incubations were conducted to examine the competition between anaerobic respiration processes Finally, new rate laws were developed for reactive transport models that rely on complementary metagenomic and geochemical signatures to identify the underlying anaerobic microbial processes in stream and wetland sediments, describe the competition between the dominant metabolic processes involved in nutrient release and U and Hg mobilization, and more accurately quantify carbon transformation and the response of microbial processes to changes in redox conditions associated with hydrological forcing. These rate laws were optimized in batch reactors with SRS wetland sediments, where iron and sulfate reduction dominate. Anaerobic carbon remineralization processes followed the expected thermodynamic sequence of microbial respiration with depth in both sediments, except that geochemical signals indicated that sulfate reduction was inactive in EFPC sediments and moderate in SRS wetland sediments. Estimates indicated that microbial iron reduction contributed to at least half of the production of reduced iron in these sediments. Incubations demonstrated that nitrate reduction, denitrification, and dissimilatory nitrate reduction to ammonium were active in the natural EFPC sediment and activated upon nitrate amendment in these nitrate-rich sediments. In turn, these processes were outcompeted by the addition of either iron oxides or sulfate as alternative terminal electron acceptors. Although geochemical products of sulfate reduction were not detected in the incubations, the abundance of sulfate reduction genes increased with depth in the sediment and was equally more pronounced in treatments amended with either iron oxides or sulfate. Simultaneously, anaerobic sulfide oxidizing bacteria coupling sulfide oxidation to DNRA (and not conventional denitrification) were apparently enriched over time, regardless of the treatments. These findings indicate that sulfate reduction is important in freshwater stream sediments and probably catalyzed by a cryptic sulfur cycle involving nitrogen species, in which the sulfur products from sulfate reduction are immediately removed by side reactions and not detectable by geochemical measurements alone. Similar experiments in SRS sediments, however, demonstrated little interaction between nitrogen and sulfur cycling microorganisms. Sulfate reduction was impacted by the addition of more thermodynamically favorable electron acceptors, suggesting either that iron-reducing microorganisms outcompeted sulfate-reducing microorganisms for organic substrate, depleting the stock of electron donor available for sulfate reduction, or that the cryptic sulfur cycle was shunted by the precipitation of FeS generated as a result of the abiotic reduction of iron oxides by dissolved sulfide. A diagnostic modeling exercise was conducted to further investigate the competition between terminal electron accepting processes. As conventional kinetic models typically do not account for cryptic cycles and used inaccurate formulations to describe competition between microbial communities, new metabolic rate laws were developed that explicitly express the electron acceptor-specific enzyme of each energetically favorable metabolic process based on gene abundance detected in the incubations. The model was tested with the sediment slurry incubation data to determine whether substrate competition could explain the decrease in sulfate reduction observed in the presence of iron oxide competitor. The model was able to reproduce geochemical concentrations really well in each treatment once the model was calibrated with the unamended control, suggesting that microbial competition was indeed driven by thermodynamic considerations. Overall, carbon remineralization processes and rates will be reproduced much more realistically with the new metabolic rate laws.

54 ENVIRONMENTAL SCIENCES↗

Electrifying Terminal Trucks To optimize freight yards

The objectives of this project were to demonstrate the feasibility of electrification for freight yards’ diesel terminal fleets through pilot projects with two or more fleets, and to generate outreach material that can be used regionally and nationally to promote electrification in other terminal fleets. We planned to leverage the data into a model program for adoption of zero emissions freight handling and make information about this project, its outcomes, and the business case for zero emission deployments available to the larger freight marketplace.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Bulk‐Boundary Correspondence of Semimetal Ru 3 Sn 7 and Topological Surface States on Chemically Realistic Terminations

Ru 3 Sn 7 is experimentally demonstrated as an efficient catalyst, with potential utilization of topological surface states for hydrogen evolution reaction. Despite its promising catalytic performance, the topological nature of Ru 3 Sn 7 remains uncertain. Particularly, the bulk-boundary correspondence has not yet been established, hence hindering a rigorous justification of its topologically-protected surface states. In this work, the bulk topology of Ru 3 Sn 7 is detailed using first-principles calculations and the topological quantum chemistry formalism. Ru3Sn7 turns out to be an enforced semimetal possessing symmetry-protected crossings within a set of bands near the Fermi level, which are enforced and prescribed by the violations of symmetry-prescribed compatibility relations. Moreover, the surface states and the associated origin from the same set of entangled bands are identified, thereby establishing the bulk-boundary correspondence. To evaluate the effects of chemical modifications, the response of topological surface states to various surface terminations, stoichiometry, and oxidation is examined. The surface structures are globally optimized, and the phase diagrams for various experimental conditions are built. It is shown that, due to changes in the local chemical environment, the original surface states are significantly altered. Modified surface bands can be observed near the Fermi level on surface terminations that preserve the C 4v symmetry.

36 MATERIALS SCIENCE↗

Coordination of Anle138b to Silver Results in Selective Reduction of a C-terminal truncated Alpha-synuclein Protein and Increased Aggregate Size

Parkinson’s disease (PD) is a prevalent age-related neurodegenerative syndrome, partially thought to be caused by a decrease in alpha-synuclein proteostasis. Anle138b = 5-(1,3-benzodioxol-5-yl)-3-(3-bromophenyl)-1H-pyrazole (HL), is undergoing clinical trials as a promising mitigator of alpha-synuclein aggregation. Because complexation to metals is known to modulate the activity of several drugs, we have prepared and characterized: H2L(ClO4), [CuI(µ-L)]3, and [AgI(µ-L)]3. To better understand the bioviability of these compounds, we monitored their effects in a cell culture model of alpha-synuclein protein aggregation using human alpha-synuclein pre-formed fibrils (PFFs). Using two different anti-alpha-synuclein antibodies, our data suggests that [AgI(µ-L)]3 decreases a C-terminal truncated protein that is approximately 12.4 kDa, as well as increases the size and alters the shape of PFF-induced aggregates. This indicates that [AgI(µ-L)]3 impacts aggregation in a manner different from HL and may serve as a novel tool for studying C-terminal truncation related aggregation chemistry.

Rue, Kelly L.↗

The Effect of Surface Terminations on the Initial Stages of TiO 2 Deposition on Functionalized Silicon

As atomic layer deposition (ALD) emerges as a method to fabricate architectures with atomic precision, emphasis is placed on understanding surface reactions and nucleation mechanisms. ALD of titanium dioxide with TiCl 4 and water has been used to investigate deposition processes in general, but the effect of surface termination on the initial TiO 2 nucleation lacks needed mechanistic insights. Here, this work examines the adsorption of TiCl 4 on Cl–, H–, and HO– terminated Si(100) and Si(111) surfaces to elucidate the general role of different surface structures and defect types in manipulating surface reactivity of growth and non-growth substrates. The surface sites and their role in the initial stages of deposition are examined by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Density functional theory (DFT) computations of the local functionalized silicon surfaces suggest oxygen-containing defects are primary drivers of selectivity loss on these surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗