Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Electron-Stimulated Oxidation of Thin Water Films Adsorbed on TiO2(110)

Electron-stimulated reactions in thin (< 3 monolayer, ML) water films adsorbed on TiO2(110) are investigated. For electron fluences less than ~1×1016 e-/cm2, irradiation with 100 eV electrons results in electron-stimulated desorption (ESD) of atomic and molecular hydrogen, but no measurable O2. The ESD leaves adsorbed hydroxyls which oxidize the TiO2(110) surface and change the post-irradiation TPD spectra of the remaining water in characteristic ways. The species remaining on the TiO2(110) after irradiation of adsorbed water films are apparently similar to those produced without irradiation by co-dosing water and O2. Annealing above ~600 K reduces the oxidized surfaces, and water TPD spectra characteristic of ion sputtered and annealed TiO2(110) are recovered. The rate of electron-stimulated “oxidation” of the water films is proportional to the coverage of water in the first layer for coverages less than 1 ML. However, higher coverages suppress this reaction. When thin water films are irradiated, the rate of electron-stimulated oxidation is independent of the initial oxygen vacancy concentration, as is the final oxidized state achieved at high electron fluences. To explain the results, we propose that electron excitation of water molecules adsorbed on Ti4+ sites leads to desorption of hydrogen atoms and leaves an OH adsorbed at the site. If hydroxyls are present in the bridging oxygen rows, these react with the OH’s on the Ti4+ sites to reform water and heal the oxygen vacancy associated with the bridging OH. Once the bridge bonded hydroxyls have been eliminated, further irradiation increases the concentration of OH’s in the Ti4+ rows leading to the creation of species which block sites in the Ti4+ rows, perhaps H2O2 and/or HO2.

08 HYDROGEN↗

Effect of Concentration on the Energetics and Dynamics of Li Ion Transport in Anatase and Amorphous TiO2

We report on the energetics and dynamics of Li diffusion in bulk anatase and amorphous TiO2 using molecular dynamics (MD) simulations and density functional theory (DFT) calculations. Using MD simulations, for both anatase and amorphous TiO2, diffusion characteristics are first studied for an isolated Li ion, followed by simulations of Li concentrations ranging from 10% to 100% in order to explore the concentration effect on the diffusivity. The isolated Li diffusion mechanism, revealed from the MD simulations, occurs via zigzag hops between the octahedral sites in anatase. The corresponding barrier for this process obtained fromDFT-NEB calculations is 480 meV.MDsimulations also show that isolated Li ion diffusivity is much slower in the amorphous TiO2 than in anatase TiO2. DFT-NEB results for the diffusion in amorphous titania indicate that Li encounters deep energy wells within the amorphous network that are in the electronvolt range, confirming our MD observation of low Li diffusivity. A monotonic decrease in diffusion barriers with increasing Li concentration is observed in the case of amorphous titania whereas a non-monotonic variation is seen in anatase, with the lowest barrier observed at 50% Li concentration. At low Li concentrations (<50%), we find that the barriers in anatase are lower than in amorphous titania. However, at the maximum Li intercalation ratios, which are experimentally known to be 50% for anatase and >75% for amorphous titania, the Li diffusivity in amorphous is found to be much higher than in anatase. Our MD simulations suggest that the underlying reason for these differences is related to changes in diffusion mechanism. Our simulations therefore indicate a strong correlation between Li ion concentration and the observed transport characteristics, offering new insights into ion conduction mechanisms that are of importance to solid-state devices used for energy storage applications.

Environmental Molecular Sciences Laboratory↗

Efficient Photoinduced Charge Injection from Chemical-Bath Deposited CdS into Mesoporous TiO2 Probed with Time-Resolved Microwave Conductivity

We use the contactless time-resolved microwave conductivity (TRMC) technique to investigate the photoconductance of CdS-coated mesoporous TiO2 and ZrO2. The CdS domains were grown directly on the surface of the oxide by a chemical bath deposition method. Mobile charge carriers are generated with a low yield following photoexcitation of CdS grown on ZrO2; there is no injection into the oxide and the short-lived photoconductance signal is attributed to the hole in CdS. In contrast, illumination of CdS domains grown on TiO2 results in very efficient electron injection into the TiO2 nanoparticles, producing long-lived charge carriers. We show that the quantum yield for electron injection into TiO2 per photon absorbed by the CdS sensitizer is close to unity. The photoconductance action spectrum follows the absorption of the CdS domains, which indicates that the charge injection efficiency does not depend on wavelength in the range where the CdS absorbs (425-550 nm).

absorption↗

Atomic Structure of the Anatase TiO2(001) Surface

Understanding the structure of well-defined anatase TiO2 surfaces is critical for deciphering site-specific thermal and photo- reaction mechanisms on anatase TiO2. Using UHV scanning tunneling microscopy (STM), we have studied the atomic structure of anatase TiO2(001) epitaxial thin films grown by oxygen plasma assisted molecular beam epitaxy. Bright rows of the (1×4) reconstructed surface are resolved as three types of features with different sizes. High-resolution STM images taken from the same area at different bias voltages show that these individual features are originated from combinations of two basic atomic building blocks. We propose a modified added molecule model for the anatase TiO2 (001) surface structure.

Environmental Molecular Sciences Laboratory↗

Self-assembled TiO2-Graphene Hybrid Nanostructures for Enhanced Li-ion Insertion

We used anionic sulfate surfactants to assist the stabilization of graphene in aqueous solutions and facilitate the self-assembly of in-situ grown nanocrystalline TiO2, rutile and anatase, with graphene. These nanostructured TiO2-graphene hybrid materials were used for investigation of Li-ion insertion properties. The hybrid materials showed significantly enhanced Li-ion insertion/extraction in TiO2. The specific capacity was more than doubled at high charge rates, as compared with the pure TiO2 phase. The improved capacity at high charge-discharge rate may be attributed to increased electrode conductivity in presence of a percolated graphene network embedded into the metal oxide electrodes.

25 ENERGY STORAGE↗

Ultrafast Multiphoton Pump-probe Photoemission Excitation Pathways in Rutile TiO2(110)

We investigate the spectroscopy and photoinduced electron dynamics within the conduction band of reduced rutile TiO2(110) surface by multiphoton photoemission (mPP) spectroscopy with wavelength tunable ultrafast (!20 fs) laser pulse excitation. Tuning the mPP photon excitation energy between 2.9 and 4.6 eV reveals a nearly degenerate pair of new unoccupied states located at 2.73 ± 0.05 and 2.85 ± 0.05 eV above the Fermi level, which can be analyzed through the polarization and sample azimuthal orientation dependence of the mPP spectra. Based on the calculated electronic structure and optical transition moments, as well as related spectroscopic evidence, we assign these resonances to transitions between Ti 3d bands of nominally t2g and eg symmetry, which are split by crystal field. The initial states for the optical transition are the reduced Ti3+ states of t2g symmetry populated by formation oxygen vacancy defects, which exist within the band gap of TiO2. Furthermore,we studied the electron dynamics within the conduction band of TiO2 by three-dimensional time-resolved pump-probe interferometric mPP measurements. The spectroscopic and time-resolved studies reveal competition between 2PP and 3PP processes where the t2g-eg transitions in the 2PP process saturate, and are overtaken by the 3PP process initiated by the band-gap excitation from the valence band of TiO2.

Environmental Molecular Sciences Laboratory↗

Reevaluation of XPS Pt 4f peak fitting: Ti 3s plasmon peak interference and Pt metallic peak asymmetry in Pt@TiO2 system

The structural, electronic, and electrochemical properties of noble metals supported on transition metal oxides, such as Pt nanoparticles (NPs) supported on TiO2 (Pt@TiO2), have been extensively studied for their relevance to energy technologies, including photocatalysis, electrocatalysis, and electrochemical energy conversion. As the need to lower the amount of Pt and other noble metals used in energy conversion systems becomes urgent, it is essential to accurately quantify the loading of these metals and electronic density redistribution between them and their supports. X-ray photoelectron spectroscopy (XPS) is widely used for the identification and quantification of chemical species. In particular, fitting of the Pt 4f spectra for Pt@TiO2 is frequently performed to determine the chemical environment and oxidation state of Pt, which strongly affect the physical behavior and catalytic performance of this system. Here, we show that neglecting contributions due to the Pt surroundings and the asymmetry of the Pt metal peak in the line shape fitting can lead to severe mischaracterization of the oxidation state of Pt. We quantify the effects of background contributions that stem from the TiO2 support and discuss how factoring in the strong asymmetry of Pt 4f doublets, which stems from the shake-up type processes, affects the interpretation of Pt 4f XPS line shape.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Environment of Nitrogen in N-doped Rutile TiO2(110)

We employ x-ray photoelectron spectroscopy (XPS), reflection high-energy electron diffraction (RHEED) and nuclear reaction analysis (NRA) to characterize the concentration-dependent structural properties of nitrogen doping into rutile TiO2. High quality N-doped TiO2 were prepared on rutile single crystal TiO2(110) substrates using plasma-assisted molecular beam epitaxy with an electron cyclotron resonance (ECR) plasma and Ti effusive sources. Films with N dopant concentrations at or below 2 at.% exhibited predominately substitutional doping based on NRA data, whereas films with concentrations above this limit resulted in little or no substitutional N and surfaces rich in Ti3+. The binding energy of the N 1s feature in XPS did not readily distinguish between these two extremes in N-doping, rendering features within 0.4 eV of each other and similar peak profiles. Although widely used to characterize the state of N in anion-doped TiO2 materials, we find that XPS is unsuitable for this task.

08 HYDROGEN↗

Enhanced visible-light absorption of mesoporous TiO2 by co-doping with transition-metal/nitrogen ions

Titanium (IV) oxide, TiO2, has been the object of intense scrutiny for energy applications. TiO2 is inexpensive, non-toxic, and has excellent corrosion resistance when exposed to electrolytes. A major drawback preventing the widespread use TiO2 for photolysis is its relatively large band gap of ~3eV. Only light with wavelengths shorter than 400 nm, which is in the ultraviolet portion of the spectrum, has sufficient energy to be absorbed. Less than 14 percent of the solar irradiation reaching the earth s surface has energy exceeding this band gap. Adding dopants such as transition metals has long been used to reduce the gap and increase photocatalytic activity by accessing the visible part of the solar spectrum. The degree to which the band gap is reduced using transition metals depends in part on the overlap of the d-orbitals of the transition metals with the oxygen p-orbitals. Therefore, doping with anions such as nitrogen to modify the cation-anion orbital overlap is another approach to reduce the gap. Recent studies suggest that using a combination of transition metals and nitrogen as dopants is more effective at introducing intermediate states within the band gap, effectively narrowing it. Here we report the synthesis of mesoporous TiO2 spheres, co-doped with transition metals and nitrogen that exhibit a nearly flat absorbance response across the visible spectrum extending into the near infrared.

Mathis, John↗

Visible Light Absorption of N-Doped TiO2 Rutile Using (LR/RT)-TDDFT and Active Space EOMCCSD Calculations

We have performed detailed ground and excited state calculations of pure and N-doped TiO2 rutile to model and analyze the experimentally observed UV/Vis spectrum. Using our embedding model we have performed both linear-response (LR) and real-time (RT) TDDFT calculations of the excited states of the pure and N-doped systems. We have also studied the lowest excitations using high-level active space equation-of-motion coupled cluster (EOMCC) approaches involving all single and inter-band double excitations. We compare and contrast the nature of the excitations in detail for the pure and doped systems and also provide an analysis of the excited-state density using our RT-TDDFT calculations. Our calculations indicate a lowering of the band gap and verify the role of the N3- states on the observed spectrum of N-doped TiO2 rutile as suggested by experimental findings. Both RT-TDDFT and EOMCC calculations show that the excitations in pure TiO2 are more delocalized compared with the N-doped system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Water in Methanol Photochemistry on Rutile TiO2(110)

Photochemistry of the molecularly and dissociatively adsorbed forms of methanol on the vacuum-annealed rutile TiO2(110) surface was explored using temperature programmed desorption (TPD), both with and without coadsorbed water. Methoxy, and not methanol, was confirmed as the photochemically active form of adsorbed methanol on this surface. UV irradiation of methoxy-covered TiO2(110) lead to depletion of the methoxy coverage and formation of formaldehyde and a surface OH group. Coadsorbed water did not promote either molecular methanol photochemistry or thermal decomposition of methanol to methoxy. However, terminal OH groups (OHt), prepared by coadsorption of water and oxygen atoms, thermally converted molecularly adsorbed methanol to methoxy at 120 K, thus enabling photoactivity. While chemisorbed water molecules had no influence on methoxy photochemistry, water molecules hydrogen-bonded in the second layer to bridging oxygen (Obr) sites inhibited the methoxy photodecomposition to formaldehyde. From this we conclude that Obr sites accept protons from the hole-mediated conversion of methoxy to formaldehyde. These results provide new fundamental understanding of the hole-scavenging role of methanol in photochemical processes on TiO2-based materials and how water influences this photochemistry. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle under contract DEAC05-76RL01830. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

Environmental Molecular Sciences Laboratory↗

Characterization of the Active Surface Species Responsible for UV-Induced Desorption of O2 from the Rutile TiO2(110) Surface

We have examined the chemical and photochemical properties of molecular oxygen on the (110) surface of rutile TiO2 at 100 K using electron energy loss spectroscopy (EELS), photon stimulated desorption (PSD) and scanning tunneling microscopy (STM). Oxygen chemisorbs on the TiO2(110) surface at 100 K through charge transfer from surface Ti3+ sites. The charge transfer process is evident in EELS by a decrease in the intensity of the Ti3+ d-to-d transition in EELS at ~0.9 eV and formation of a new loss ~2.8 eV. Based on comparisons with the available homogeneous and heterogeneous literature for complexed/adsorbed O2, the species responsible for the 2.8 eV peak can be assigned to a surface peroxo (O2 2-) state of O2. This species was identified as the active form of adsorbed O2 on TiO2(110) for PSD. The adsorption site of this peroxo species was assigned to that of a regular five-cooridinated Ti4+ (Ti5c) site based on comparisons between the UV exposure dependent behavior of O2 in STM, PSD and EELS data. Assignment of the active form of adsorbed O2 to a peroxo species at normal Ti5c sites necessitates reevaluation of the simple mechanism in which a single valence band hole neutralizes a singly charged O2 species (superoxo or O2-) leading to desorption of O2 from a physisorbed potential energy surface. This work was supported by the U.S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences, and the Chemical Imaging Initiative at Pacific Northwest National Laboratory (PNNL), and was performed in the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE's Office of Biological and Environmental Research and located at PNNL.

Environmental Molecular Sciences Laboratory↗

Site Competition During Coadsorption of Acetone with Methanol and Water on TiO2(110)

The competitive interaction between acetone and two solvent molecules (methanol and water) for surface sites on rutile TiO2(110) was studied using temperature programmed desorption (TPD). On a vacuum reduced TiO2(110) surface, which possessed ~5% oxygen vacancy sites, excess methanol displaced preadsorbed acetone molecules to weakly bound and physisorbed desorption states below 200 K, whereas acetone was stabilized to 250 K against displacement by methanol on an oxidized surface through formation of an acetone-diolate species. These behaviors of acetone differ from the competitive interactions between acetone and water in that acetone is less susceptible to displacement by water. Examination of acetone+methanol and acetone+water multilayer combinations shows that acetone is more compatible in water-ice films than in methanol-ice films, presumably because water has greater potential as a hydrogen-bond donor than does methanol. Acetone molecules displaced from the TiO2(110) surface by water are more likely to be retained in the near-surface region, having a greater opportunity to revisit the surface, than when methanol is used as a coadsorbate. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

10 SYNTHETIC FUELS↗

Electrical property measurements of Cr-N codoped TiO2 epitaxial thin films grown by pulsed laser deposition

The temperature dependent resistivity and thermo-electric power of Cr-N codoped TiO2 were compared with that of single element N and Cr doped and undoped TiO2 using epitaxial anatase thin films grown by pulsed laser deposition on (100) LaAlO3 substrates. The resistivity plots and especially the thermoelectric power data confirm that codoping is not a simple sum of single element doping. However, the negative sign of the Seebeck coefficient indicates electron dominated transport independent of doping. The narrowing distinction among the effects of different doping methods combined with increasing resistivity of the films with improving crystalline quality of TiO2 suggest that structural defects play a critical role in the doping process.

co-doped↗

Visible-Light Photoresponse of Nitrogen-Doped TiO2: Excited State Studies using Time-Dependent Density Functional Theory and Equation-of-Motion Coupled Cluster Methods

To shed light on the nature of the electronic states at play in N-doped TiO2 nanoparticles, we have performed detailed ground and excited state calculations on pure and N-doped TiO2 rutile using an embedding model. We have validated our model by comparing ground-state embedded results with those obtained from periodic DFT calculations. Our results are consistent with periodic calculations. Using this embedding model we have performed B3LYP based TDDFT calculations of the excited state spectrum. We have also studied the lowest excitations using high-level equation-of-motion coupled cluster (EOMCC) approaches involving all single and inter-band double excitations. We compare and contrast the nature of the excitations in detail for the pure and doped systems using these calculations. Our calculations indicate a lowering of the bandgap and confirm the role of the N3- states on the UV/Vis spectrum of N-doped TiO2 rutile supported by experimental findings.

36 MATERIALS SCIENCE↗

Preparation, characterization of Fe3O4 at TiO2 magnetic nanoparticles and their application for immunoassay of biomarker of exposure to organophosphorus pesticides

Novel Fe3O4 at TiO2 magnetic nanoparticles were prepared and developed for a new nanoparticle-based immunosensor for electrochemical quantification of organophosphorylated butyrylcholinesterase (BChE) in plasma, a specific biomarker of exposure to organophosphorus (OP) agents. The Fe3O4 at TiO2 nanoparticles were synthesized by hydrolysis of tetrabutyltitanate on the surface of Fe3O4 magnetic nanospheres, and characterized by attenuated total reflection Fourier-transform infrared spectra, transmission electron microscope and X-ray diffraction. The functional Fe3O4 at TiO2 nanoparticles were performed as capture antibody to selectively enrich phosphorylated moiety instead of phosphoserine antibody in the traditional sandwich immunoassays. The secondary recognition was served by quantum dots (QDs)-tagged anti-BChE antibody (QDs-anti-BChE). With the help of a magnet, the resulting sandwich-like complex, Fe3O4 at TiO2/OP-BChE/QDs-anti-BChE, was easily isolated from sample solutions and the released cadmium ions were detected on a disposable screen-printed electrode (SPE). The binding affinities were investigated by both surface plasmon resonance (SPR) and square wave voltammetry (SWV). This method not only avoids the drawback of unavailability of commercial OP-specific antibody but also amplifies detection signal by QDs-tags together with easy separation of samples by magnetic forces. The proposed immunosensor yields a linear response over a broad OP-BChE concentrations range from 0.02 to 10 nM, with detection limit of 0.01 nM. Moreover, the disposable nanoparticle-based immunosensor has been validated with human plasma samples. It offers a new method for rapid, sensitive, selective and inexpensive screening/evaluating exposure to OP pesticides.

biomarker↗

Remediation of Organic and Inorganic Arsenic Contaminated Groundwater using a Nonocrystalline TiO2 Based Adsorbent

A nanocrystalline TiO2-based adsorbent was evaluated for the simultaneous removal of As(V), As(III), monomethylarsonic acid (MMA), and dimethylarsinic acid (DMA) in contaminated groundwater. Batch experimental results show that As adsorption followed pseudo-second order rate kinetics. The competitive adsorption was described with the charge distribution multi-site surface complexation model (CD-MUSIC). The groundwater containing an average of 329 ?g L-1 As(III), 246 ?g L-1 As(V), 151 ?g L-1 MMA, and 202 ?g L-1 DMA was continuously passed through a TiO2 filter at an empty bed contact time of 6 min for 4 months. Approximately 11 000, 14 000, and 9900 bed volumes of water had been treated before the As(III), As(V), and MMA concentration in the effluent increased to 10 ?g L-1. However, very little DMA was removed. The EXAFS results demonstrate the existence of a bidentate binuclear As(V) surface complex on spent adsorbent, indicating the oxidation of adsorbed As(III). A nanocrystalline TiO2-based adsorbent could be used for the simultaneous removal of As(V), As(III), MMA, and DMA in contaminated groundwater.

54 ENVIRONMENTAL SCIENCES↗