SEARCH · Search NASA

Results for “Torque Limiter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1996

Mars Pathfinder Lander Deployment Mechanisms

The Mars Pathfinder Lander will land, right itself, and open so that none of its airbag covers its solar cells. This requires two different types of mechanisms, the Airbag Retraction Actuators, and the Lander Petal Actuators which are designed for a high torque, low temperature, dirty environment, and limited life application. The development of these actuators investigated low temperature lubrication, Electrical Discharge Machining (EDM) to cut gears, and gear design for limited life use.

Mars↗

NASA NTRSDate not supplied

PMSM Parameter Estimation using a Linear Unknown Input Interval Observer

In this paper, the problem of permanent magnet synchronous motor (PMSM) speed and unknown load torque estimation is addressed. For this purpose, a interval unknown input observer (UIO) for linear time-invariant (LTI) systems is used. First, the PMSM model is linearized in order to make it in a suitable form for the linear interval UIO. Then, the interval UIO is applied to allow the joint estimation of the motor speed and the unknown load torque disturbance. The main advantages of this approach is that it not only allows the joint state and unknown input estimation, but also to take the different uncertainty sources into account. Indeed, taking model and measurement uncertainty into account is crucial. Assuming that the measurement noise and disturbances are bounded, lower and upper bounds are first computed for the unmeasured state (motor speed) and then for the unknown input (load torque). The proposed approach and its limitations are demonstrated with the nonlinear PMSM model derived from its equivalent electrical circuit.

Elinirina I Robinson↗

NASA NTRSDate not supplied

Estimation of Permanent Magnet Synchronous Motor Parameters using a Linear Unknown Input Interval Observer

This paper develops and evaluate a technique to estimate the speed and unknown load torque of a permanent magnet synchronous motor (PMSM). An interval unknown input observer (UIO) for linear time-invariant (LTI) systems is designed and utilized to estimate the PMSM parameters. Interval UIOs are advantageous as they allow for the estimation of both states and unknown inputs, while accounting for varying uncertainty sources, such as model and measurement uncertainties inherent in dynamic systems and processes. First, the nonlinear PMSM model is linearized to transform it to a suitable form for application of the linear interval UIO. Then, the interval UIO is applied to jointly estimate the motor speed and the unknown load torque disturbance. Assuming that the measurement noise and disturbances are bounded, lower and upper bounds are first computed for the unmeasured state (motor speed) and then for the unknown input (load torque). The proposed approach and its limitations are demonstrated for the nonlinear PMSM model derived from its equivalent electrical circuit.

Elinirina I Robinson↗

NASA NTRS1987

Helicopter anti-torque system using fuselage strakes

The improvement of the helicopter torque control system is discussed. At low to medium forward speeds helicopter performance is limited by the effectiveness of the means for counteracting main rotor torque and controlling sideslip airloads. These problems may be overcome by mounting strakes on the aft fuselage section. For single rotor helicopters whose main rotor rotates counter-clockwise as viewed from above, one of the strakes would be mounted in the upper lefthand quadrant and the second in the lower left hand quadrant. The strakes alter the air flow around the fuselage by separating the flow so as to produce lateral airloads on the tail boom which oppose main-rotor torque. The upper strake operates in a right crosswind to oppose main rotor torque, and the lower strake has effect in left crosswinds. The novelty of this invention resides in the simple and economical manner in which the helicopter tail boom may be modified by the addition of strakes in order to increase torque control, and reduce the need for supplemental mechanical means of torque control.

Kelley, Henry L.↗

NASA NTRS1981

Bolt-bearing fatigue of a graphite/epoxy laminate

Graphite/epoxy laminates (T300/5208) were tested under bolt-bearing loads for a range of bolt clampup torques and for several test conditions involving water. High clampup torque improved both the static strength and fatigue limit by about 100 percent compared to a simple pin-bearing case, which had no through-the-thickness constraint. The static strength improvement was explained in terms of failure modes. Bolt clampup also influenced the hole elongation that developed before failure. For both the static and fatigue tests, the hole elongations were much larger for the low-torque-clampup case than for the pin-bearing case or for tests with moderate clampup torques. Tests in water degraded static bearing strength only slightly, but reduced the fatigue limit about 40 percent below that for tests conducted in air.

Crews, J. H., Jr.↗

NASA NTRS1980

Bolt-bearing fatigue of a graphite/epoxy laminate

Graphite/epoxy laminates were tested under bolt-bearing loads for a range of bolt clampup torques and for several test conditions involving water. High clampup torque improved both the static strength and fatigue limit by about 100 percent compared to a simple pin-bearing case, which had no through-the-thickness constraint. The static strength improvement was explained in terms of failure modes. Bolt clampup also influenced the hole elongation that developed before failure. For both the static and fatigue tests, the hole elongations were much larger for the low-torque clampup. Tests in water degraded static bearing strength only slightly, but reduced the fatigue limit about 40 percent below that for tests conducted in air.

Crews, J. H., Jr.↗

NASA NTRS1995

Tool For Driving Many Fasteners Simultaneously

Proposed tool tightens or loosens several bolts, screws, nuts, or other threaded fasteners arranged in circle on compressor head, automotive wheel, pipe-end flange, or similar object. Enables assembly or disassembly in fraction of time needed to tighten fasteners one at a time. Simultaneously applies same torque to all fasteners, preventing distortion and enhancing reliability. Concept not limited to circular fastener patterns. Adapted to rectangular configurations like on engine intake manifolds, by adding gears to drive train to provide proper spacing. Designed to deliver fixed or adjustable maximum torque. To ensure even seal loading, piston pressure simultaneously ramped from initial to final values to maintain relatively constant torque loading on all fasteners until final specifications limit achieved.

Cook, Joseph S., Jr.↗

NASA NTRS1975

Large Space Telescope oscillations induced by CMG friction

Conditions are predicted under which limit cycles may be caused by the friction torque of the control moment gyroscope (CMG) output gimbal used in the Large Space Telescope (LST). The parameter plane analysis technique is described, and three separate models of the CMG output friction nonlinearity are used in three separate analyses. The results suggest that the Dahl model (included in model 3) is the best available friction model for use in dynamic analysis. The analysis and analog simulation indicate the absence of limit cycle behavior due to the CMG output gimbal friction nonlinearity for presently estimated LST numerical parameters and the occurrence of one stable and one unstable limit cycle if substantially larger numerical values are allowed for the CMG gimbal pivot friction parameter and/or the running friction torque.

Seltzer, S. M.↗

NASA NTRS2009

A Method for and Issues Associated with the Determination of Space Suit Joint Requirements

In the design of a new space suit it is necessary to have requirements that define what mobility space suit joints should be capable of achieving in both a system and at the component level. NASA elected to divide mobility into its constituent parts-range of motion (ROM) and torque- in an effort to develop clean design requirements that limit subject performance bias and are easily verified. Unfortunately, the measurement of mobility can be difficult to obtain. Current technologies, such as the Vicon motion capture system, allow for the relatively easy benchmarking of range of motion (ROM) for a wide array of space suit systems. The ROM evaluations require subjects in the suit to accurately evaluate the ranges humans can achieve in the suit. However, when it comes to torque, there are significant challenges for both benchmarking current performance and writing requirements for future suits. This is reflected in the fact that torque definitions have been applied to very few types of space suits and with limited success in defining all the joints accurately. This paper discussed the advantages and disadvantages to historical joint torque evaluation methods, describes more recent efforts directed at benchmarking joint torques of prototype space suits, and provides an outline for how NASA intends to address joint torque in design requirements for the Constellation Space Suit System (CSSS).

Matty, Jennifer E.↗

NASA NTRS1988

A theoretical prediction of the attitude dynamics due to aerodynamic effects on the reusable reentry satellite

As part of the preliminary mission analysis of the Reusable Reentry Satellite (RRS) (planned for launching in the early to mid-1990s), the on-orbit attitude dynamics of the RRS were analyzed to quantify various parameters that would affect the attitude dynamics of the vehicle. The analysis simulated the attitude dynamics of the RRS due to aerodynamic forces coupled with the motion of the satellite moving around the orbit, estimated the levels of induced angular rates due to external disturbance torques while in orbit, and established the limits of operational orbit altitudes. The results show that, for a typical 60-day mission, orbit altitudes above 350 km are necessary to prevent undesirable orbit decay, with about 200 km as the lower limit. It was also found that, in order to maintain a pointing attitude toward the sun within an acceptable angular deviation for periods exceeding 8 hrs, it is necessary to orbit at an altitude above 600 km.

Wercinski, P. F.↗

NASA NTRS1992

Ribbon Cable Strap Partly Free Of Backlash

Flexible ribbon cable strap carries heat and electrical signals across rotational shaft without creating backlash torques at both extremes of rotation through limited angular range. Keeps its flexibility and nonbacklash properties at cryogenic temperatures. Used to connect delicate equipment, such as movable infrared sensors, requiring precise positioning. Adapted to greater or lesser angular travel by changing its length and offset and bias of ribbon cables.

Farley, Rodger↗

NASA NTRS1996

Mars pathfinder lander deployment mechanisms

The Mars Pathfinder Lander employs numerous mechanisms, as well as autonomous mechanical functions, during its Entry, Descent and Landing (EDL) Sequence. This is the first US lander of its kind, since it is unguided and airbag-protected for hard landing using airbags, instead of retro rockets, to soft land. The arrival condition, location, and orientation of the Lander will only be known by the computer on the Lander. The Lander will then autonomously perform the appropriate sequence to retract the airbags, right itself, and open, such that the Lander is nearly level with no airbag material covering the solar cells. This function uses two different types of mechanisms - the Airbag Retraction Actuators and the Lander Petal Actuators - which are designed for the high torque, low temperature, dirty environment and for limited life application. The development of these actuators involved investigating low temperature lubrication, Electrical Discharge Machining (EDM) to cut gears, and gear design for limited life use.

Gillis-Smith, Greg R.↗

NASA NTRS1989

Eddy current damper

A high torque capacity eddy current damper used as a rate limiting device for a large solar array deployment mechanism is discussed. The eddy current damper eliminates the problems associated with the outgassing or leaking of damping fluids. It also provides performance advantages such as damping torque rates, which are truly linear with respect to input speed, continuous 360 degree operation in both directions of rotation, wide operating temperature range, and the capability of convenient adjustment of damping rates by the user without disassembly or special tools.

Ellis, R. C.↗

NASA NTRS2003

Reusable Solid Rocket Motor Nozzle Joint 5 Redesign

Torque tension testing of a newly designed Reusable Solid Rocket Motor nozzle bolted assembly was successfully completed. Test results showed that the 3-sigma preload variation was as expected at the required input torque level and the preload relaxation were within the engineering limits. A shim installation technique was demonstrated as a simple process to fill a shear lip gap between nozzle housings in the joint region. A new automated torque system was successfully demonstrated in this test. This torque control tool was found to be very precise and accurate. The bolted assembly performance was further evaluated using the Nozzle Structural Test Bed. Both current socket head cap screw and proposed multiphase alloy bolt configurations were tested. Results indicated that joint skip and bolt bending were significantly reduced with the new multiphase alloy bolt design. This paper summarizes all the test results completed to date.

Lui, R. C.↗

NASA NTRS1977

An optimal smoothing algorithm for Viking spacecraft attitude determination

A fundamental requirement for ground analysis of onboard attitude control systems is the determination of the time evolution of spacecraft angular orientation and velocity, and of external torques acting on the spacecraft. However, at times, there are limitations on the data received on the ground, and essential but missing variables must be estimated. This paper contains a description of the design and implementation of an algorithm for angular position, velocity, and torque estimation. The algorithm has been used to analyze the performance of the Viking Orbiter attitude control system. Typical results of this analysis are presented.

Rodriguez, G.↗

NASA NTRS1979

A0535+26 - Refined position measurement and new pulse period data

The hard, pulsing, transient X-ray source A0535+26 has been observed with SAS 3 on three occasions during 1977-1978. These observations have yielded a precise position measurement (20 arcsec error radius), which renders the identification of A0535+26 with the Be star HDE 245770 virtually certain. The pulse phase was tracked for about 9 days in April 1978 and clearly showed both first and second derivatives in the pulse period. An analysis of these timing data, combined with data from previous observations, leads to the following conclusions: (1) a significant fraction of the observed changes in pulse period is probably intrinsic to the compact X-ray star (e.g., accretion torques on a neutron star), and (2) conservative limits on binary orbital parameters tend to further confirm a long orbital period (at least about 20 days).

Li, F.↗

NASA NTRS1984

Yaw Attitude Estimation for the Tracking and Data Relay Satellite System

The Tracking and Data Relay Satellite System (TDRSS) uses a groundbased attitude determination algorithm to open loop point the satellite's high data rate antennas. The spacecraft is able to measure its pitch and roll attitude, but its yaw attitude is periodically unobservable. The ground software uses a state-space estimator, an adaptation of a Luenberger observer, to predict the spacecraft yaw angle during these unobservable periods. It contains states associated with the roll/yaw dynamics and the on-board control law. The accuracy is limited by the modeling fidelity of the disturbance torques acting on the spacecraft. After initial operating problems were cleared up, the operation of the estimator has converged to predicted performance.

Staich, S.↗

NASA NTRS1993

Spline screw multiple rotations mechanism

A system for coupling two bodies together and for transmitting torque from one body to another with mechanical timing and sequencing is reported. The mechanical timing and sequencing is handled so that the following criteria are met: (1) the bodies are handled in a safe manner and nothing floats loose in space, (2) electrical connectors are engaged as long as possible so that the internal processes can be monitored throughout by sensors, and (3) electrical and mechanical power and signals are coupled. The first body has a splined driver for providing the input torque. The second body has a threaded drive member capable of rotation and limited translation. The embedded drive member will mate with and fasten to the splined driver. The second body has an embedded bevel gear member capable of rotation and limited translation. This bevel gear member is coaxial with the threaded drive member. A compression spring provides a preload on the rotating threaded member, and a thrust bearing is used for limiting the translation of the bevel gear member so that when the bevel gear member reaches the upward limit of its translation the two bodies are fully coupled and the bevel gear member then rotates due to the input torque transmitted from the splined driver through the threaded drive member to the bevel gear member. An output bevel gear with an attached output drive shaft is embedded in the second body and meshes with the threaded rotating bevel gear member to transmit the input torque to the output drive shaft.

Vranish, John M.↗