Results for “Traffic Separation” — Page 6

NASA NTRSDate not supplied

Terminal Area Size and Switching Technique Analysis for Unmanned Aircraft Systems Operations

Unmanned Aircraft Systems (UAS) need to be able to comply with the Code of Federal Regulations Part 91 ‘see and avoid’ requirement. Detect and avoid (DAA) is an essential enabler for integrating UAS into the National Airspace System. A DAA system is a suite of sensors, trackers, and alerting and guidance algorithms that assists a remote pilot in maintaining separation from airborne traffic. Previous works have focused on operations transiting to and from Class A or special use airspace. More recent efforts have defined DAA system requirements for operations in and around the airport terminal environment. In continuation of this effort, this paper defines the DAA Terminal Area (DTA) size and switching technique for the DAA Well Clear (DWC) volume while transitioning between en route and the terminal area.

Unmanned Aircraft Systems↗

NASA NTRSDate not supplied

Alert Timing Assessment for Unmanned Aircraft System Terminal Area Operations

A Detect and Avoid (DAA) system is an essential enabler for integrating Unmanned Aircraft Systems (UAS) into the U.S. National Airspace System. A DAA system uses a suite of sensors, trackers and alerting and guidance algorithms to assist a remote pilot in maintaining separation from airborne traffic. The initial minimum performance standards focused on en route operations; in order to facilitate operations in and around the airport environment, this paper presents the derivation of the early alert threshold for UAS terminal operations.

Unmanned Aircraft Systems↗

NASA NTRS2008

Analysis of a Dynamic Multi-Track Airway Concept for Air Traffic Management

The Dynamic Multi-track Airways (DMA) Concept for Air Traffic Management (ATM) proposes a network of high-altitude airways constructed of multiple, closely spaced, parallel tracks designed to increase en-route capacity in high-demand airspace corridors. Segregated from non-airway operations, these multi-track airways establish high-priority traffic flow corridors along optimal routes between major terminal areas throughout the National Airspace System (NAS). Air traffic controllers transition aircraft equipped for DMA operations to DMA entry points, the aircraft use autonomous control of airspeed to fly the continuous-airspace airway and achieve an economic benefit, and controllers then transition the aircraft from the DMA exit to the terminal area. Aircraft authority within the DMA includes responsibility for spacing and/or separation from other DMA aircraft. The DMA controller is responsible for coordinating the entry and exit of traffic to and from the DMA and for traffic flow management (TFM), including adjusting DMA routing on a daily basis to account for predicted weather and wind patterns and re-routing DMAs in real time to accommodate unpredicted weather changes. However, the DMA controller is not responsible for monitoring the DMA for traffic separation. This report defines the mature state concept, explores its feasibility and performance, and identifies potential benefits. The report also discusses (a) an analysis of a single DMA, which was modeled within the NAS to assess capacity and determine the impact of a single DMA on regional sector loads and conflict potential; (b) a demand analysis, which was conducted to determine likely city-pair candidates for a nationwide DMA network and to determine the expected demand fraction; (c) two track configurations, which were modeled and analyzed for their operational characteristic; (d) software-prototype airborne capabilities developed for DMA operations research; (e) a feasibility analysis of key attributes in the concept design; (f) a near-term, transitional application of the DMA concept as a proving ground for new airborne technologies; and (g) conclusions. The analysis indicates that the operational feasibility of a national DMA network faces significant challenges, especially for interactions between DMAs and between DMA and non-DMA traffic. Provided these issues are resolved, sectors near DMAs could experience significant local capacity benefits.

Wing, David J.↗

NASA NTRS2020

Adaptive Airborne Separation to Enable UAM Autonomy in Mixed Airspace

The excitement and promise generated by Urban Air Mobility (UAM) concepts have inspired both new entrants and large aerospace companies throughout the world to invest hundreds of millions in research and development of air vehicles, both piloted and unpiloted, to fulfill these dreams. The management and separation of all these new aircraft have received much less attention, however, and even though NASA’s lead is advancing some promising concepts for Unmanned Aircraft Systems (UAS) Traffic Management (UTM), most operations today are limited to line of sight with the vehicle, airspace reservation and geofencing of individual flights. Various schemes have been proposed to control this new traffic, some modeled after conventional air traffic control and some proposing fully automatic management, either from a ground-based entity or carried out on board among the vehicles themselves. Previous work has examined vehicle-based traffic management in the very low altitude airspace within a metroplex called UTM airspace in which piloted traffic is rare. A management scheme was proposed in that work that takes advantage of the homogeneous nature of the traffic operating in UTM airspace. This paper expands that concept to include a traffic management plan usable at all altitudes desired for electric Vertical Takeoff and Landing urban and short-distance, inter-city transportation. The interactions with piloted aircraft operating under both visual and instrument flight rules are analyzed, and the role of Air Traffic Control services in the postulated mixed traffic environment is covered. Separation values that adapt to each type of traffic encounter are proposed, and the relationship between required airborne surveillance range and closure speed is given. Finally, realistic scenarios are presented illustrating how this concept can reliably handle the density and traffic mix that fully implemented and successful UAM operations would entail.

Cotton, William B.↗

NASA NTRSDate not supplied

Introduction to Air Traffic Management

The presentation introduces students and faculty to air traffic management with focus on air traffic data for data-science. Starting with the common attributes of transportation systems — highway transportation, air transportation and data transportation, the initial set of slides discuss the purpose of data-science in air traffic management, reasons why air traffic management is challenging, and the multidisciplinary nature of air traffic management research. The history of flight from 1903 — Wright Flyer — to 1987 — formation of the National Air Traffic Controllers Association — is briefly discussed. The national airspace system is described in terms of airports in the U. S., air traffic control facilities (flight service stations, terminal, enroute and system command center), airspace geometry (sectors, airways and navaids), governing regulations and directives, airspace classification (Class A through G), special use airspace, visual flight rules and instrument flight rules. The contents of a flight-plan are described. Weather briefing is discussed. The surveillance equipment used for surface, terminal area and enroute are described, and the aircraft states obtained using the surveillance data are listed. Airline operations control functions — schedule development, flight planning, resource scheduling and flight following — are noted. Next, the roles and responsibilities of air traffic controllers and traffic flow managers are discussed. Separation standards and conflict resolution techniques are outlined. Finally, traffic flow management techniques are reviewed with an illustrative example.

Air Traffic Management↗

NASA NTRSDate not supplied

Introduction to Air Traffic Management

The presentation introduces students and faculty to air traffic management with focus on air traffic data for data-science. Starting with the common attributes of transportation systems — highway transportation, air transportation and data transportation, the initial set of slides discuss the purpose of data-science in air traffic management, reasons why air traffic management is challenging, and the multidisciplinary nature of air traffic management research. The history of flight from 1903 — Wright Flyer — to 1987 — formation of the National Air Traffic Controllers Association — is briefly discussed. The national airspace system is described in terms of airports in the U. S., air traffic control facilities (flight service stations, terminal, enroute and system command center), airspace geometry (sectors, airways and navaids), governing regulations and directives, airspace classification (Class A through G), special use airspace, visual flight rules and instrument flight rules. The contents of a flight-plan are described. Weather briefing is discussed. The surveillance equipment used for surface, terminal area and enroute are described, and the aircraft states obtained using the surveillance data are listed. Airline operations control functions — schedule development, flight planning, resource scheduling and flight following — are noted. Next, the roles and responsibilities of air traffic controllers and traffic flow managers are discussed. Separation standards and conflict resolution techniques are outlined. Finally, traffic flow management techniques are reviewed with an illustrative example.

Air Traffic Management↗

NASA NTRS1983

Influence of a perspective cockpit traffic display format on pilot avoidance maneuvers

The perspective projections of cockpit displays of traffic information on CRTs as a means of presenting vertical separation information to airline pilots were experimentally studied. Identical sets of traffic encounters were viewed by pilots either using a plan-view or perspective traffic display which presented identical separation information. The pilots maneuvered somewhat earlier with perspective displays and maneuvered more frequency in the vertical dimension. Another feature of the maneuver pattern was the absence of a tendency to turn toward an intruding aircraft. The previously observed bias toward horizontal maneuver is probably not based on the procedural reasons often given, but probably reflects the poorer presentation of vertical separation on previously used traffic displays.

Ellis, S. R.↗

NASA NTRS2019

Exploration of Near-Term Potential Routes and Procedures for Urban Air Mobility

This paper investigates routes and procedures for Urban Air Mobility (UAM), which aims to reduce congestion on the roads and highways by offering air taxi as an alternative to driving. The routes and procedures being explored are current-day helicopter routes along with different communication procedures that are available as tools in the near-term. Three different levels of UAM traffic were evaluated in the Dallas Fort Worth (DFW) area. The current-day helicopter routes were modified to separate them from traditional traffic, and a Letter of Agreement (LOA) was introduced in some of the conditions to reduce verbal communications. We found that modifications to the routes and introduction of LOA helped increase the number of UAM flights that the controllers reported they could manage and reduce their communications, which made controller self-reported workload more operationally acceptable. However, the self-reported workload experienced by busy airport towers cannot be effectively managed via the usage of LOA and modified helicopter routes, suggesting there is an opportunity to re-think roles and responsibilities of the UAM system participants.

Verma, Savita A.↗

NASA NTRS1983

Simulation of a cockpit display concept for increased airport capacity

A research effort has been undertaken to determine the feasibility of employing a forward-looking cockpit display to provide information that would enable aircraft to utilize reduced separation, and hence increased runway capacity, through the application of multiple-glide-path approach techniques. The current study was an initial exploration into this concept in which traffic information was added to a HUD format to allow the pilot to monitor the traffic situation and to self space on a lead aircraft during a simulated single glide-path approach. The results of this study indicate that this display concept can provide sufficient information to the pilot for traffic monitoring and self separation. Additionally, the pilots noted that an increase in situational awareness, relative to conventional instrument flight, was provided by the traffic information on the display.

Abbott, T. S.↗

NASA NTRS2008

Impact of Pilot Delay and Non-Responsiveness on the Safety Performance of Airborne Separation

Assessing the safety effects of prediction errors and uncertainty on automationsupported functions in the Next Generation Air Transportation System concept of operations is of foremost importance, particularly safety critical functions such as separation that involve human decision-making. Both ground-based and airborne, the automation of separation functions must be designed to account for, and mitigate the impact of, information uncertainty and varying human response. This paper describes an experiment that addresses the potential impact of operator delay when interacting with separation support systems. In this study, we evaluated an airborne separation capability operated by a simulated pilot. The experimental runs are part of the Safety Performance of Airborne Separation (SPAS) experiment suite that examines the safety implications of prediction errors and system uncertainties on airborne separation assistance systems. Pilot actions required by the airborne separation automation to resolve traffic conflicts were delayed within a wide range, varying from five to 240 seconds while a percentage of randomly selected pilots were programmed to completely miss the conflict alerts and therefore take no action. Results indicate that the strategicAirborne Separation Assistance System (ASAS) functions exercised in the experiment can sustain pilot response delays of up to 90 seconds and more, depending on the traffic density. However, when pilots or operators fail to respond to conflict alerts the safety effects are substantial, particularly at higher traffic densities.

Consiglio, Maria↗

NASA NTRS2005

Conflict Resolution Performance in an Experimental Study of En Route Free Maneuvering Operations

NASA has developed a far-term air traffic management concept, termed Distributed Air/Ground Traffic Management (DAG-TM). One component of DAG-TM, En Route Free Maneuvering, allows properly trained flight crews of equipped autonomous aircraft to assume responsibility for separation from other autonomous aircraft and from Instrument Flight Rules (IFR) aircraft. Ground-based air traffic controllers continue to separate IFR traffic and issue flow management constraints to all aircraft. To examine En Route Free Maneuvering operations, a joint human-in-the-loop experiment was conducted in summer 2004 at the NASA Ames and Langley Research Centers. Test subject pilots used desktop flight simulators to resolve traffic conflicts and adhere to air traffic flow constraints issued by subject controllers. The experimental airspace integrated both autonomous and IFR aircraft at varying traffic densities. This paper presents a subset of the En Route Free Maneuvering experimental results, focusing on airborne and ground-based conflict resolution, and the effects of increased traffic levels on the ability of pilots and air traffic controllers to perform this task. The results show that, in general, increases in autonomous traffic do not significantly impact conflict resolution performance. In addition, pilot acceptability of autonomous operations remains high throughout the range of traffic densities studied. Together with previously reported findings, these results continue to support the feasibility of the En Route Free Maneuvering component of DAG-TM.

Doble, Nathan A.↗

NASA NTRSDate not supplied

Automated Airspace Management: Concept, Development, and Testing

For many decades, researchers at NASA Ames Research Center have worked to make the air-transportation system more efficient, predictable, and effective. Since about 2005 one important aspect of this research has been the development of an autonomous system for air-traffic control. This system, known as the Autoresolver, is designed to perform most of the roles that air-traffic controllers perform including ensuring separation between aircraft, creating routes around weather and other avoidance volumes, and sequencing and scheduling aircraft across points in space. The recent, rapid expansion of new aircraft operations and types, including urban air mobility aircraft and small unmanned aerial systems, have only increased the need for highly automated systems to control the predicted traffic demand. This talk will focus on the development of the Autoresolver - from concept to testing. It will also discuss the National Airspace (NAS) Digital Twin simulation platform, created to facilitate rapid testing and improvement of the algorithm and with the hope of proving the automation in a high-fidelity environment. An open question that will be discussed is how to ensure that the system-level emergent behavior of independently developed autonomous algorithms is what is desired.

autonomy↗

NASA NTRS2022

Cooperative Separation in Upper Class E Airspace

This document presents baseline functional requirements for a prototype NASA research Upper Class E Traffic Management (ETM) system to enable the cooperative separation concept [1, 2]. The baseline functional requirements are developed by incorporating inputs from NASA and the FAA researchers and engineering staff, and industry partners while accounting for the unique performance characteristics and mission needs of various existing and future ETM vehicle types. The functionalities include information sharing for situational awareness, conformance monitoring, and operating practices for cooperative separation. Several realistic traffic scenarios were built to test, validate, and demonstrate the cooperatively managed operation in the ETM environment and the associated capabilities in a simulation environment.

Upper Class E Air Traffic Management↗

NASA NTRS1994

Information for Lateral Aircraft Spacing Enabling Closely-Spaced Runway Operations During Instrument-Weather Conditions

In an effort to increase airport capacity, the U.S. plans on investing nearly $6 billion a year to properly maintain and improve the nation's major airports. Current FAA standards however, require a reduction in terminal operations during instrument-weather conditions at many airports, causing delays and reducing airport capacity. NASA, in cooperation with the FAA, has developed the Terminal Area Productivity Program to achieve clear-weather capacity in instrument- weather conditions for all phases of flight. This paper describes a series of experiments planned to investigate the conceptual design of different systems that provide information to flight crews regarding nearby traffic during the approach phase of flight. The purpose of this investigation is to identify and evaluate different display and auditory interfaces to the crew for use in closely-spaced parallel runway operations. Three separate experiments are planned for the investigation. The first two experiments will be conducted using part-task flight simulators located at the MIT Aeronautical Systems Laboratory and at NASA Ames. The third experiment will be conducted in the Advanced Concepts Flight Simulator, a generic "glass-cockpit" simulator at NASA Ames. Subjects for each experiment will be current glass-cockpit pilots from major U.S. air carriers. Subject crews will fly several experimental scenarios in which pseudo-aircraft are "blundered" into the subject aircraft simulation. Runway spacing, longitudinal aircraft separation, aircraft performance and traffic information will be varied. Analyses of the subject reaction times in evading the blundering aircraft and the resulting closest points of approach will be conducted. This paper presents a preliminary examination of the data recorded during the part-task experiments. The impact of traffic information on closely-spaced parallel runway operations is discussed, cockpit displays to aid these operations are examined, and topics for future research are suggested.

Thrush, Trent↗

NASA NTRS2022

Functional Allocation Approach for Separation Assurance for Remotely Piloted Aircraft

A functional analysis framework is employed with the objective of exploring the separation assurance function for the remotely piloted aircraft system. The architecture of the remotely piloted aircraft system—highlighting several of the component systems and the functions resident onboard the remotely piloted aircraft and in the ground control station—is described to provide the context for understanding the complexity of the said system for a detailed functional analysis. The interactions between the agents of the separation assurance function belonging to the air traffic service provider, remotely piloted aircraft system operator and remotely piloted aircraft are described. Separation assurance by air traffic control, remain well clear by the remotely piloted aircraft system and collision avoidance onboard the remotely piloted aircraft are briefly discussed. The functional analysis framework is illustrated by relating the agents to the actions of (a) acquiring the surveillance information, (b) checking for conflicts, (c) creating the solutions for resolving conflicts and (d) implementing the conflict resolution solutions. This example is offered as a template by which a more detailed functional analysis of this and other functions could be developed. The architecture of the remotely piloted aircraft system is described to aid this process.

Functional analysis↗

NASA NTRS2022

Functional Allocation Approach for Separation Assurance for Remotely Piloted Aircraft

A functional analysis framework is employed with the objective of exploring the separation assurance function for the remotely piloted aircraft system. The architecture of the remotely piloted aircraft system—highlighting several of the component systems and the functions resident onboard the remotely piloted aircraft and in the ground control station—is described to provide the context for understanding the complexity of the said system for a detailed functional analysis. The interactions between the agents of the separation assurance function belonging to the air traffic service provider, remotely piloted aircraft system operator and remotely piloted aircraft are described. Separation assurance by air traffic control, remain well clear by the remotely piloted aircraft system and collision avoidance onboard the remotely piloted aircraft are briefly discussed. The functional analysis framework is illustrated by relating the agents to the actions of (a) acquiring the surveillance information, (b) checking for conflicts, (c) creating the solutions for resolving conflicts and (d) implementing the conflict resolution solutions. This example is offered as a template by which a more detailed functional analysis of this and other functions could be developed. The architecture of the remotely piloted aircraft system is described to aid this process.

functional analysis↗

NASA NTRS1998

Controller Strategies for Managing Air Traffic in High Altitude Arrival Sectors

Substantial increases in the volume of air traffic in the National Airspace System (NAS) are forecast for the next decade, with the number of passengers travelling on U.S. airlines expected to increase by as much as 60%. This increased demand on system capacity will be accompanied by increases in traffic complexity as air traffic service providers routinely accommodate user preferred routing requests. Changes to the NAS to meet these new demands are currently underway, including development of new decision support tools to aid controllers in monitoring and managing air traffic, and increased air-to-air and air-to-ground information exchange. Changes in roles and responsibilities of pilots and controllers in flight path management will accompany these changes in traffic patterns and information technology, however the ultimate responsibility for maintaining aircraft separation will remain with the air traffic controller. A thorough understanding of the methods controllers use to manage air traffic will help ensure that changes to the NAS are implemented in a way that maintains the controller's ability to separate aircraft as the system evolves. This presentation describes the strategies controllers use today to manage arrival traffic in its descent from cruise altitude to the Terminal Radar Approach Control (TRACON) boundary. Factors that increase the complexity of this task include the presence of overflight traffic, varying aircraft performance characteristics, winds aloft, ground speed variations with altitude, the need to merge arrival traffic into a single stream, and, when arrival traffic exceeds airport runway capacity, the added task of metering flow into the TRACON. Because of the limited information available to controllers to manage arrival traffic, their strategies are often driven by the need to reduce the task's complexity, which can result in de-optimized flight paths for individual aircraft (e.g., sub-optimal descent or speed profiles). Understanding these strategies and the cognitive demands that drive them will support a safe transition to a NAS that relies on enhanced technologies. In addition, it could enable system developers to identify opportunities for new automation-based procedures or information displays that could reduce the controller's workload and increase operational efficiency.

Smith, Nancy↗

NASA NTRS2009

Estimation of Separation Buffers for Wind-Prediction Error in an Airborne Separation Assistance System

Wind prediction errors are known to affect the performance of automated air traffic management tools that rely on aircraft trajectory predictions. In particular, automated separation assurance tools, planned as part of the NextGen concept of operations, must be designed to account and compensate for the impact of wind prediction errors and other system uncertainties. In this paper we describe a high fidelity batch simulation study designed to estimate the separation distance required to compensate for the effects of wind-prediction errors throughout increasing traffic density on an airborne separation assistance system. These experimental runs are part of the Safety Performance of Airborne Separation experiment suite that examines the safety implications of prediction errors and system uncertainties on airborne separation assurance systems. In this experiment, wind-prediction errors were varied between zero and forty knots while traffic density was increased several times current traffic levels. In order to accurately measure the full unmitigated impact of wind-prediction errors, no uncertainty buffers were added to the separation minima. The goal of the study was to measure the impact of wind-prediction errors in order to estimate the additional separation buffers necessary to preserve separation and to provide a baseline for future analyses. Buffer estimations from this study will be used and verified in upcoming safety evaluation experiments under similar simulation conditions. Results suggest that the strategic airborne separation functions exercised in this experiment can sustain wind prediction errors up to 40kts at current day air traffic density with no additional separation distance buffer and at eight times the current day with no more than a 60% increase in separation distance buffer.

Consiglio, Maria C.↗