Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Fabrication and Characterization of Aligned YBa{sub 2}Cu{sub 3}O{sub 7 − δ} Superconductor Electrospun Nanofibers and Twisted Yarn Based on PVA

YBa{sub 2}Cu{sub 3}O{sub 7 − δ} (YBCO) superconducting twisted yarns from electrospun aligned nanofibers are produced with a critical transition temperature of T{sub c} = 92 K. A solution of PVA and Y–Ba–Cu acetates are used as a precursor in the electrospinning to prepare aligned nanofibers and twisted yarns. The aligned nanofibers and twisted yarns are then pyrolysed to remove PVA and sintered to obtain a superconducting phase. Finally, before and after sintering, the aligned nanofibers and twisted yarns are studied by SEM, XRD, and AC magnetic susceptibility techniques. Results are presented in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A detailed study of mean-flow solutions for stability analysis of transitional flows

A finite-volume upwind-difference parabolized Navier-Stokes code is utilized to obtain laminar mean-flow solutions at Mach 3.5 on a half-angle cone of 5 deg at an angle-of-attack of 2 deg. A detailed study is conducted on this configuration; the main focus is the velocity profiles in the leeward and windward symmetry planes at various axial locations. Comparisons of the solution profiles are made with both a central-difference code that incorporates scalar and matrix dissipation models and another state-of-the-art upwind-difference finitevolume code. The results obtained emphasize the importance of using matrix dissipation models for schemes that require explicit artificial dissipation. These results also illustrate the accuracy and efficiency of the planeby-plane marching procedure for computing mean-flow solutions for predicting the onset of transition with linear instability.

Ramakrishnan, R.↗

Modified magnetohydrodynamics around the electroweak transition

We analyse solutions of the MHD equations around the electroweak transition taking into account the effects of the chiral anomaly. It is shown that a transition that is not of the first order has direct consequences on the evolution of the asymmetry between left- and right-handed leptons. Assuming an initial chiral asymmetry in the symmetric phase at temperatures higher than the transition temperature, as well as the existence of magnetic fields, it is demonstrated that the asymmetry typically grows with time, until it undergoes a fast decrease at the transition, and then eventually gets damped at lower temperatures in the broken phase. We argue that it is unlikely to have any significant magnetic field amplification as a consequence of the electroweak transition in the Standard model, even when the chiral anomaly is introduced. The presence of a chiral asymmetry between left- and right-handed charge carriers naturally leads to the creation of helical magnetic fields from non-helical fields and this can have consequences on their subsequent evolution. Similarly, an initially vanishing chiral asymmetry is naturally created in the presence of a helical magnetic field.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solvent extraction of transition metals

The invention provides a continuous method for extracting transition metal, the method comprising: supplying a spent generator liquor comprising transition metal in highly alkaline solution; mixing the liquor with acid thereby generating a solution, wherein the transition metal resides within the solution; combining the solution with an organic liquid comprising tributyl phosphate or other neutral extractant to extract the transition metal within the organic liquid; washing the extracted transition metal in the organic liquid with acid so as to remove non-transition-metal salts from the organic liquid phase; and stripping the washed transition metal loadedorganic liquid phase with hydroxide, water or complexing agent to remove the transition metal from the organic phase.

Tkac, Peter↗

Structural phase transitions in the Ag{sub 2}Nb{sub 4}O{sub 11}-Na{sub 2}Nb{sub 4}O{sub 11} solid solution

The phase transitions between various structural modifications of the natrotantite-structured system xAg{sub 2}Nb{sub 4}O{sub 11}-(1-x)Na{sub 2}Nb{sub 4}O{sub 11} have been investigated and a phase diagram constructed as a function of temperature and composition. This shows three separate phase transition types: (1) paraelectric-ferroelectric, (2) rhombohedral-monoclinic and (3) a phase transition within the ferroelectric rhombohedral zone between space groups R3c and R3. The parent structure for the entire series has space group R3{sup Macron }c. Compositions with x>0.75 are rhombohedral at all temperatures whereas compositions with x<0.75 are all monoclinic at room temperature and below. At x=0.75, rhombohedral and monoclinic phases coexist with the phase boundary below room temperature being virtually temperature-independent. The ferroelectric phase boundary extends into the monoclinic phase field. No evidence was found for the R3-R3c phase boundary extending into the monoclinic phase field and it is concluded that a triple point is formed. - Graphical abstract: Phase diagram for xAg{sub 2}Nb{sub 4}O{sub 11}-(1-x)Na{sub 2}Nb{sub 4}O{sub 11} solid solution showing changes in crystal symmetry as a function of temperature and composition. The crystal structure is depicted. Highlights: Black-Right-Pointing-Triangle Ferroelectric, rhombohedral Ag{sub 2}Nb{sub 4}O{sub 11} in solid solution with monoclinic Na{sub 2}Nb{sub 4}O{sub 11}. Black-Right-Pointing-Triangle Three phase boundaries were studied as a function of composition and temperature. Black-Right-Pointing-Triangle Both rhombohedral and monoclinic variants exhibit ferroelectricity. The parent phase of the series has space group R3{sup Macron }c.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Flat Analyzer Polycapillary Spectrometer for X-ray Absorption Spectroscopy of Dilute Transition Metals at X-ray-Free Electron Lasers

X-ray absorption spectroscopy (XAS) coupled with highly intense pulses from an X-ray-free electron laser (XFEL) can be used to track ultrafast chemical dynamics. Nonetheless, measurements for dilute samples (≤1 mM) have been exceptionally challenging, as scattering background signals dominate over the sample’s X-ray fluorescence. We show that femtosecond time-resolved XAS measurements of sub-millimolar transition metal solutions are now possible at the Linac Coherent Light Source (LCLS) using a high-throughput polycapillary XAS spectrometer, designed, developed, and commissioned at LCLS and the Stanford Synchrotron Radiation Lightsource (SSRL). The instrument integrates three polycapillary optics that collect and collimate X-ray fluorescence emitted from the interaction point with a high solid angle. X-ray collimated fluorescence is then selectively diffracted by coupled graphite analyzer crystals. As a result, the contribution of scattered photons is suppressed. Experiments at the Pt L 3 -edge on 0.1 mM aqueous K 2 PtCl 6 (delivered via a 100 μm liquid jet) were successfully performed in the laser pump X-ray probe configuration at the LCLS XCS and XPP instruments. We report the transient spectra of hexachloroplatinate within the first 10 ps after a 266 nm photoexcitation. We observed a short-lived reduced intermediate (≈2 ps). The polycapillary X-ray spectrometer at LCLS now enables the efficient study of the dynamics of ultradilute transition metals in solution. This capability opens the door to investigating plasmonic systems, photocatalysts, enzymes, and other scarce and dilute samples.

LCLS↗

First-principles study of order-disorder transitions in multicomponent solid-solution alloys

In this paper, we will focus on the recent development of the order-disorder transition in metallic materials. The past decades have witnessed fast development in the first-principles methodologies and their applications to ordering transitions in multi-component alloys, particularly the high-entropy alloys. The driving force for the proceedings comes from (i) the advance of algorithms and increasingly cheaper hardware, and also (ii) the great passion to model alloys with increasing number of components.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of short-range magnetic correlations in ferromagnetic Ni-V alloys

Here we experimentally study how the magnetic correlations develop in a binary alloy close to the ferromagnetic quantum critical point with small-angle neutron scattering (SANS). Upon alloying the itinerant ferromagnet nickel with vanadium, the ferromagnetic order is continuously suppressed. The critical temperature T c vanishes when vanadium concentrations reach the critical value of x c =0.116 indicating a quantum critical point separating the ferromagnetic and paramagnetic phases. Earlier magnetization and μ⁢SR data have indicated the presence of magnetic inhomogeneities in Ni 1-x ⁢V x and, in particular, recognize the magnetic clusters close to x c , on the paramagnetic and on the ferromagnetic sides with nontrivial dynamical properties [R. Wang et al., Phys. Rev. Lett. 118, 267202 (2017)]. We present the results of SANS study with full polarization analysis of polycrystalline Ni 1-x⁢ V x samples with x=0.10 and x=0.11 with low critical temperatures T c <50 K. For both Ni-V samples close to x c we find isotropic magnetic short-range correlations on the nanometer scale persisting at low temperatures. They are suppressed gradually in higher magnetic fields. In addition, signatures of long-range ordered magnetic domains are present below T c . The fraction of these magnetic clusters embedded in the ferromagnetic ordered phase grows toward x c and agrees well with the cluster fraction estimate from the magnetization and μ⁢SR data. Our SANS studies provide new insights into the nature of the inhomogeneities in a ferromagnetic alloy close to a quantum critical point.

36 MATERIALS SCIENCE↗

A comprehensive first-principles study of solute elements in dilute Ni alloys: Diffusion coefficients and their implications to tailor creep rate

Diffusion regulates a vast number of materials properties and phenomena such as creep, the focus of the present work. However, a deep understanding of the effect of how each alloying element in a Ni-base superalloy affects properties such as diffusion and creep is far from complete. Here, in this study, we report temperature-dependent dilute solute diffusion coefficients and their implications to tailor the creep rate for 26 transition metal solute elements, X's, in fcc Ni using first-principles calculations. Calculations are performed using the five-frequency model for dilute solute diffusion and the nudged elastic band method within the local density approximation. Thermodynamic properties at finite temperatures for all configurations are calculated using the quasi-harmonic Debye model. In general, the fastest diffusing solute elements in Ni are found at the left side of the periodic table and the slowest diffusing solute elements are found in group VIIB. In particular, the present work indicates that the diffusivity of the dilute solute elements is correlated to the compressibility of each solute element on the respective Ni 31 X supercell, and not as strongly to the ionic radius of the solute elements, as previously suggested. Finally, results from the diffusivity study are combined with the previous results of elastic constants and stacking fault energies, and hence, a relative creep rate ratio for these 26 solute elements is modeled. It is shown that in most cases, slower diffusing solute elements provide the most creep resistance. This is true even at higher temperatures, due mainly to the solute's strong bonding with Ni atoms in the host lattice.

36 MATERIALS SCIENCE↗

Towards optimal gas cooling with minimal aero-optical distortion for a laser amplifier head

Next-generation lasers combining high-peak-power, ultrashort pulses with high repetition rates have the potential to efficiently deliver the high-average-power outputs required by many emerging technologies and areas of research. This work introduces a three-stage workflow consisting of low- and high-fidelity fluid simulations, in addition to aero-optical analyses. The final goal is to optimize gas cooling within a laser amplifier head while maintaining minimal aero-optical distortions. Low-fidelity RANS simulations are used to obtain mean flow solutions and transition locations. High-fidelity LES simulations, informed by their RANS counterparts, provide solutions containing density fluctuations, which are then passed on to the aero-optical analysis. The aero-optical analysis provides insight into the optical quality of the laser beam passing through the flow found in the LES results.

42 ENGINEERING↗

Temperature dependent electronic transport in concentrated solid solutions of the 3 d -transition metals Ni, Fe, Co and Cr from first principles

An approach previously developed for the calculation of transport coefficients via the Mott relations is applied to the calculation of finite temperature transport properties of disordered alloys—electrical resistivity and the electronic part of thermal conductivity. The coherent-potential approximation is used to treat chemical disorder as well as other sources of electron scattering, i.e., temperature induced magnetic moment fluctuations and lattice vibrations via the alloy analogy model. This approach, which treats all forms of disorder on an equal first-principles footing, is applied to the calculation of transport properties of a series of fcc concentrated solid solutions of the 3d -transition metals Ni, Fe, Co, and Cr. For the nonmagnetic alloys Ni 0.8 Cr 0.2 and Ni 0.33 Co 0.33 Cr 0.3 , the combined effects of chemical disorder and electron-lattice vibrations scattering result in a monotonic increase in the resistivity as a function of temperature from an already large, T = 0, residual resistivity. For magnetic Ni 0.5 Co 0.5, Ni 0.5 Fe 0.5 , and Ni 0.33 Fe 0.33 Co 0.33 , the residual resistivity of which is small, additional electron scattering from temperature induced magnetic moment fluctuations results in a further rapid increase of the resistivity as a function of temperature. The electronic part of the thermal conductivity in nonmagnetic Ni 0.8 Cr 0.2 and Ni 0.33 Co 0.33 Cr 0.33 monotonically increases with temperature. This behavior is a result of the competition between a reduction in the conductivity due to electron-lattice vibrations scattering and temperature induced increase in the number of carriers. In the magnetic alloys, electron scattering from magnetic fluctuations leads to an initial rapid decrease in thermal conductivity until this is overcome by an increasing number of carriers at temperatures slightly below the Curie temperature. As a result, similar to the resistivity above T C , the electronic parts of the thermal conductivities are close to each other in all alloys studied.

36 MATERIALS SCIENCE↗

Multiple transonic solutions and a new class of shock transitions in solar and stellar winds

The steady isothermal solar wind equations are shown to admit, under certain circumstances, mutliple transonic solutions when, for example, momentum deposition gives rise to multiplee critical points in the flow. These multiple solutions consist of a continuous solution and solutions which involve shock transitions between critical solutions. The ambiguity arising from the multiplicity of the solutions can be resolved by following the time evolution of a wind profile with one critical point. Results of the numerical integration of the time-dependent equations with momentum addition show that each of these multiple solutions is physically accessible and depends on the rate of change of momentum deposition. These results suggest that standing shocks are likely to be present in the inner solar wind flow.

Habbal, S. R.↗

High-pressure phase transitions of Fe 3-x Ti x O 4 solid solution up to 60 GPa correlated with electronic spin transition

The structural phase transition of the titanomagnetite (Fe 3–x Ti x O 4 ) solid solution under pressures up to 60 GPa has been clarified by single-crystal and powder diffraction studies using synchrotron radiation and a diamond-anvil cell. Present Rietveld structure refinements of the solid solution prove that the prefered cation distribution is based on the crystal field preference rather than the magnetic spin ordering in the solid solution. The Ti-rich phases in 0.734 ≤ x ≤1.0 undergo a phase transformation from the cubic spinel of Fd3m to the tetragonal spinel structure of I4 1 /amd with c/a < 1.0. The transition is driven by a Jahn-Teller effect of IV Fe 2+ (3d 6 ) on the tetrahedral site. The c/a < 1 ratio is induced by lifting of the degeneracy of the e orbitals by raising the d x2-y2 orbital below the energy of the d z2 orbital. The distortion characterized by c/a < 1 is more pronounced with increasing Ti content in the Fe 3–x Ti x O 4 solid solutions and with increasing pressure. An X-ray emission experiment of Fe 2 TiO 4 at high pressures confirms the spin transition of FeKβ from high spin to intermediate spin (IS) state. The high spin (HS)-to-low spin (LS) transition starts at 14 GPa and the IS state gradually increases with compression. The VI Fe 2+ in the octahedral site is more prone for the HS-to-LS transition, compared with Fe 2+ in the fourfold- or eightfold-coordinated site. The transition to the orthorhombic post-spinel structure with space group Cmcm has been confirmed in the whole compositional range of Fe 3–x Ti x O 4 . The transition pressure decreases from 25 GPa (x = 0.0) to 15 GPa (x = 1.0) with increasing Ti content. There are two cation sites in the orthorhombic phase: M1 and M2 sites of eightfold and sixfold coordination, respectively. Fe 2+ and Ti 4+ are disordered on the M2 site. This structural change is accelerated at higher pressures due to the spin transition of Fe 2+ in the octahedral site. This is because the ionic radius of VI Fe 2+ becomes 20% shortened by the spin transition. At 53 GPa, the structure transforms to another high-pressure polymorph with Pmma symmetry with the ordered structure of Ti and Fe atoms in the octahedral site. This structure change results from the order-disorder transition.

Yamanaka, Takamitsu↗

Confocal Raman Microscopy Investigation of the Wetting of Reversed-Phase Liquid Chromatographic Stationary Phase Particles

Wetting phenomena in reversed-phase liquid chromatographic (RPLC) stationary phase particles strongly influence the retention of solutes with high water-content mobile phases. To better understand these phenomena, this work reports the spectroscopic observation of the wetting of the interior of individual C 18 -silica stationary phase particles with acetonitrile–water mobile phase solutions by confocal Raman microscopy. It was found that the pores of dry C 18 silica do not wet when the concentration of acetonitrile is below 0.12 mol fraction (28% by volume). It was also found that there is a wetting hysteresis, where particles that had been previously exposed to acetonitrile solutions above the wetting transition remain filled with solution even at much lower concentrations of acetonitrile in the surrounding solution. Contact angles of acetonitrile–water solutions were measured at a planar C 18 -modified silica surface and used to predict the capillary wetting of the particles based on the Young–Laplace equation. The solution composition at the wetting transition detected by Raman microscopy is higher in acetonitrile concentration than predicted by the Young–Laplace equation, which may be due to the presence of a vapor or air gap at the interface between the hydrophobic pores and aqueous solution. Further evidence of this behavior is found in water porosimetry results, which show wetting pressures ~5 times greater than predicted by the Young–Laplace equation and are consistent with only 50% of a water interface being in contact with the C 18 surface. Furthermore, this fraction increases to 80% at an acetonitrile concentration of 0.12 mol fraction, leading to spontaneous and irreversible wetting of the hydrophobic pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetics of cobalt alloys and compounds and solute–vacancy binding in fcc cobalt: A first-principles database

Using extensive first-principles density functional calculations, we calculate thermodynamic properties of binary fcc cobalt-based alloys with 25 different solute elements. For each solute element X, we calculate its (a) nearest- and next-nearest-neighbor solute–vacancy binding energy, (b) dilute impurity mixing energy with respect to the equilibrium and hypothetical fcc-based reference states of the solute, (c) enthalpy of formation of cobalt-rich binary ordered compounds in the Co–X system, (d) solubility enthalpy, and other derived quantities. Here, we find that the solute–vacancy binding energies of all the studied solutes in fcc cobalt are positive (indicating favorable binding), in contrast to nickel, aluminum, magnesium, and copper-based alloys, where mid 3d transition metal solutes have unfavorable solute–vacancy binding. We study the physical and chemical effects influencing solute–vacancy binding energy, and find that (a) it correlates broadly with solute size—larger solute atoms possess stronger binding with vacancies—and this is understood in terms of strain relief and secondary next-nearest-neighbor interactions, and (b) it follows a parabolic trend as a function of d-occupancy across the transition metal series—falling to a minimum at the middle of the series—and this is understood in terms of a d-band filling effect. We also find this d-band filling effect in other calculated quantities such as the dilute impurity volumes and dilute impurity mixing energies. To aid in building thermodynamic databases, we tabulate all the calculated thermodynamic quantities, and compare them with experimental phase diagrams data and previous literature, and find good agreement where such data is available.

36 MATERIALS SCIENCE↗

Spectroscopic features of dissolved iodine in pristine and gamma-irradiated nitric acid solutions

While iodine speciation is important for a wide range of nuclear activities, understanding the mechanisms of the transformations of iodine between chemical forms and the sensitivity of these transitions to solution conditions and exposure to radiation remains an active area of research. This work curates spectroscopic data from several experimental techniques and establishes their sensitivity and limitations in detecting changes in iodine speciation in both neutral and acidic regimes. The techniques include Raman spectroscopy, Fourier Transform Infrared (FTIR) spectroscopy, 127 I NMR spectroscopy, and ultraviolet-visible (UV-Vis) spectroscopy. Analysis of these data indicates that these commonly accessible spectroscopies often have dynamic ranges of measurable concentrations that do not always overlap between all techniques. The experimental techniques are disparately sensitive to iodide (I - ), molecular iodine (I 2 ), iodate (IO 3 - ), and periodate (IO 4 - ) species. Raman, FTIR, and NMR spectra were subsequentially analyzed using two-dimensional correlation analyses to generate high-resolution autocorrelation spectra. Here, the use of these spectroscopies is then extended to tracking acidification-induced and gamma irradiation-induced transformations of dissolved sodium iodate in deionized water and concentrated nitric acid. Both dissolution into nitric acid and irradiation with a gamma source are demonstrated to perturb the iodine speciation promoting their assembly into molecular iodine (I 2 ) and/or triiodide (I 3 - ). While I 2 and I 3 - species are undetectable with FTIR spectroscopy and 127 I NMR spectroscopy, the species can be detected with UV-Vis spectroscopy, and in some instances, I 3 - can be detected with Raman spectroscopy in the low wavenumber region. Ultimately, the results of this work provide a path to designing optimal combinations of techniques to detect forms of iodine across a wide range of concentrations and conditions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Structure of intermediate shocks in collisionless anisotropic Hall-magnetohydrodynamics plasma models

The existence of discontinuities within the double-adiabatic Hall-magnetohydrodynamics (MHD) model is discussed. These solutions are transitional layers where some of the plasma properties change from one equilibrium state to another. Under the assumption of traveling wave solutions with velocity C and propagation angle θ with respect to the ambient magnetic field, the Hall-MHD model reduces to a dynamical system and the waves are heteroclinic orbits joining two different fixed points. The analysis of the fixed points rules out the existence of rotational discontinuities. Simple considerations about the Hamiltonian nature of the system show that, unlike dissipative models, the intermediate shock waves are organized in branches in parameter space, i.e., they occur if a given relationship between θ and C is satisfied. Electron-polarized (ion-polarized) shock waves exhibit, in addition to a reversal of the magnetic field component tangential to the shock front, a maximum (minimum) of the magnetic field amplitude. The jumps of the magnetic field and the relative specific volume between the downstream and the upstream states as a function of the plasma properties are presented. The organization in parameter space of localized structures including in the model the influence of finite Larmor radius is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ultraviolet absorption spectra of mercuric halides.

The gas phase transitions of the mercuric halides were observed in the UV region by operating at temperatures above 400 K and at vapor pressures on the order of 0.5 mm. Spectral features exhibited by the chloride, bromide, and iodide of mercury correlate energetically with bands previously designated as intermolecular charge transfer transitions. The solution spectra of mercuric iodide and deep color of the crystals (if not due to some solid state interactions) indicate that this molecule may also have longer wavelength transitions.

Templet, P.↗