Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transmission problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Field-incidence noise transmission loss of general aviation aircraft double wall configurations

Theoretical formulations have been developed to describe the transmission of reverberant sound through an infinite, semi-infinite and a finite double panel structure. The model incorporates the fundamental resonance frequencies of each of the panels, the mass-air-mass resonances of the structure, the standing wave resonances in the cavity between the panels and finally the coincidence resonance regions, where the exciting sound pressure wave and flexural waves of each of the panels coincide. It is shown that phase cancellation effects of pressure waves reflected from the cavity boundaries back into the cavity allows the transmission loss of a finite double panel structure to be approximated by a finite double panel mounted in an infinite baffle having no cavity boundaries. Comparison of the theory with high quality transmission loss data yields good agreement in the mass-controlled frequency region. It is shown that the application of acoustic blankets to the double panel structure does not eliminate the mass-air-mass resonances if those occur at low frequencies. It is concluded that this frequency region of low noise transmission loss is a potential interior noise problem area for propeller driven aircraft having a double panel fuselage construction.

Grosveld, F. W.↗

Modeling the Complete Planetary Subsurface Radio Remote Sensing Problem

Ground penetrating radar (GPR) methods are in the forefront of the search for subsurface water on Mars largely because of their platform versatility. In theory these instruments can operate from orbit, on the ground, and any altitude in between. Recent review papers and white papers make the strong case for using GPR methods in subsurface water exploration. But important questions have been raised recently about effect of unknown parameters on the ability to successfully obtain planetary GPR measurements. The almost completely unknown lower ionosphere on Mars may cause serious signal absorption problems for GPR instruments on orbiting platforms, and lossy upper layers of the ground may reduce the returned signal for any platform. What is clearly needed is a minimum approximations, full-wave model of the complete GPR problem, including ionospheric dispersion and absorption, surface transmission, and subsurface scattering. We are developing such a model that is as general purpose as possible, allowing arbitrary ionospheric parameters, surface roughness, and subsurface inhomogeneities. We present some of the details of this model, and highlight some of its capabilities with numerical examples. Additional information is contained in the original extended abstract.

Cummer, S. A.↗

Space processing of chalcogenide glasses

Chalcogenide glasses are discussed as good infrared transmitters, possessing the strength, corrosion resistance, and scale-up potential necessary for large 10.6-micron windows. The disadvantage of earth-produced chalcogenide glasses is shown to be an infrared absorption coefficient which is unacceptably high relative to alkali halides. This coefficient is traced to optical nonhomogeneities resulting from environmental and container contamination. Space processing is considered as a means of improving the infrared transmission quality of chalcogenides and of eliminating the following problems: optical inhomogeneities caused by thermal currents and density fluctuation in the l-g earth environment; contamination from the earth-melting crucible by oxygen and other elements deleterious to infrared transmission; and, heterogeneous nucleation at the earth-melting crucible-glass interface.

Larsen, D. C.↗

Theoretical and experimental comparison of an ultra-high-speed laser data transmission system

The performance of a digital optical data transmission system is specified by the probability that the system erroneously decides a signal has or has not been transmitted. Two factors which induce signal fading and thereby decrease system performance are atmospheric scintillation and transmitter pointing inaccuracy. A channel simulator was developed that is capable of producing the effects of both atmospheric scintillation and the transmitter pointing problem for a neodymium-yag optical data transmission systems. Comparison of data taken from the modulated intensity of a beam having been transmitted through the channel simulator with experimental data from GEOS-B argon laser transmission through the atmosphere to a low earth-orbiting satellite indicates that the modulated signal intensity is log-normal to the degree of measured atmospheric scintillation.

Tycz, M.↗

Latest developments in the display of large-scale ionospheric and thermospheric data sets

Over the past decade, data base sizes have continually increased and will continue to do so in the future. This problem of size is further compounded because the trend in present-day studies is to use data from many different locations and different instruments and then compare it with data from global scale physical models. The latter produce data bases of comparable if not even larger size. Much of the data can be viewed as 'image' time sequences and is most readily viewed on color display terminals. These data sets reside in national or owner-generated data bases linked together by computer networks. As the size increases, just moving this data around, taking 'quick-looks' at the data, or even storing it locally become severe problems compromising the scientific return from the data. Is the present-day technology with these analysis techniques being used in the best way? What are the prospects for reducing the storage and transmission size of the data sets? Examples of such problems and potential solutions are described in this paper.

Sojka, J. J.↗

Anomalous TWTA output power spikes and their effect on a digital satellite communications system

Several 30 GHz, 60 W traveling wave tube amplifiers (TWTA) were manufactured for the NASA Lewis Research Center's High Burst Rate Link Evaluation Terminal Project. An unusual operating problem characterized by anomalous nonperiodic output power spikes, common to all of the TWTAs proved during testing to significantly affect the performance of a digitally-modulated data transmission test system. Modifications made to the TWTAs significantly curtailed the problem and allowed acceptable system performance to be obtained. This paper presents a discussion of the TWTA output power spike problem, possible causes of the problem, and the solutions implemented by the manufacturer which improved the TWTA performance to an acceptable level. The results of the testing done at NASA Lewis on the TWTAs both before and after the improvement made by Hughes are presented, and the effects of the output power spikes on the performance of the test system are discussed.

May, Brian D.↗

Mechanical components

Research on bearings, gears, seals, and rotor dynamics (specifically high speed balancing and dampers) is presented. The research pertains to problems in both aircraft turbine engines and helicopter transmissions.

Anderson, W. J.↗

Dynamics and control of a continuum model for a solar power system

An approach for modeling dynamic equations of motion of a plate attached with rigid bodies is presented. The equations of motion are developed using the principle of virtual work. Lagrange multipliers are used as interaction forces and/or moments to maintain prescribed constraints which is the basis of the interconnection between the plate and rigid bodies. The overall approach is unique in the sense that a continuous model described by a family of partial differential equations is established. An approximate formulation by using variational method is established yielding a solution compatible with the assumed degree of approximation. The formulation is useful particularly when parametric study of dynamic response for a satellite power system is desired. As an example, an approximate governing equation of algebraic eigenvalue problem is given for a dual microwave power transmission system. Controller design is discussed.

Juang, J. N.↗

A Secure Key Distribution System of Quantum Cryptography Based on the Coherent State

The cryptographic communication has a lot of important applications, particularly in the magnificent prospects of private communication. As one knows, the security of cryptographic channel depends crucially on the secrecy of the key. The Vernam cipher is the only cipher system which has guaranteed security. In that system the key must be as long as the message and most be used only once. Quantum cryptography is a method whereby key secrecy can be guaranteed by a physical law. So it is impossible, even in principle, to eavesdrop on such channels. Quantum cryptography has been developed in recent years. Up to now, many schemes of quantum cryptography have been proposed. Now one of the main problems in this field is how to increase transmission distance. In order to use quantum nature of light, up to now proposed schemes all use very dim light pulses. The average photon number is about 0.1. Because of the loss of the optical fiber, it is difficult for the quantum cryptography based on one photon level or on dim light to realize quantum key-distribution over long distance. A quantum key distribution based on coherent state is introduced in this paper. Here we discuss the feasibility and security of this scheme.

Guo, Guang-Can↗

CLEAR: Boosted Ly alpha Transmission of the Intergalactic Medium in UV-bright Galaxies

Reionization is an inhomogeneous process, thought to begin in small ionized bubbles of the intergalacticmedium (IGM) around overdense regions of galaxies. Recent Lyman-alpha (Lyα) studies during the epochof reionization show growing evidence that ionized bubbles formed earlier around brighter galaxies, suggest-ing higher IGM transmission of Lyαfrom these galaxies. We investigate this problem using IR slitless spec-troscopy from the Hubble Space Telescope (HST) Wide-Field Camera 3 (WFC3) G102 grism observations of148 galaxies selected via photometric redshifts at6.0< z <8.2. These galaxies have spectra extracted fromthe CANDELS LyαEmission at Reionization (CLEAR) survey. We combine the CLEAR data for 275 galaxieswith the Keck/DEIMOS+MOSFIRE dataset from the Texas Spectroscopic Search for LyαEmission at the Endof Reionization Survey. We then constrain the Lyαequivalent-width (EW) distribution at6.0< z <8.2, whichis described by an exponential form,dN/dEW∝exp(-EW)/W0, with the characteristice-folding scale width(W0). We confirm a significant drop of the Lyαstrength (orW0) atz >6. Furthermore, we compare the redshiftevolution ofW0between galaxies at different UV luminosities. The UV-bright (MUV<−21, orLUV> L∗)galaxies show weaker evolution with a decrease of 0.4 (±0.2) dex inW0atz >6while UV-faint (MUV>−21,orLUV< L∗) galaxies exhibit a significant drop by a factor of 0.7-0.8 (±0.2) dex inW0fromz <6toz >6.Our results add to the accumulating evidence that UV-bright galaxies exhibit boosted Lyαtransmission in theIGM, suggesting that reionization completes sooner in regions proximate to galaxies of higher UV luminosity.

Intae Jung↗

Wormgear geometry adopted for implementing hydrostatic lubrication and formulation of the lubrication problem

The geometrical parameters for a wormgear intended to be used as the transmission in advanced helicopters are finalized. The resulting contact pattern of the meshing tooth surfaces is suitable for the implementation of hydrostatic lubrication Fluid film lubrication of the contact is formulated considering external pressurization as well as hydrodynamic wedge and squeeze actions. The lubrication analysis is aimed at obtaining the oil supply pressure needed to separate the worm and gear surfaces by a prescribed minimum film thickness. The procedure of solving the mathematical problem is outlined.

Sun, D. C.↗

Fourth Computational Aeroacoustics (CAA) Workshop on Benchmark Problems

This publication contains the proceedings of the Fourth Computational Aeroacoustics (CAA) Workshop on Benchmark Problems. In this workshop, as in previous workshops, the problems were devised to gauge the technological advancement of computational techniques to calculate all aspects of sound generation and propagation in air directly from the fundamental governing equations. A variety of benchmark problems have been previously solved ranging from simple geometries with idealized acoustic conditions to test the accuracy and effectiveness of computational algorithms and numerical boundary conditions; to sound radiation from a duct; to gust interaction with a cascade of airfoils; to the sound generated by a separating, turbulent viscous flow. By solving these and similar problems, workshop participants have shown the technical progress from the basic challenges to accurate CAA calculations to the solution of CAA problems of increasing complexity and difficulty. The fourth CAA workshop emphasized the application of CAA methods to the solution of realistic problems. The workshop was held at the Ohio Aerospace Institute in Cleveland, Ohio, on October 20 to 22, 2003. At that time, workshop participants presented their solutions to problems in one or more of five categories. Their solutions are presented in this proceedings along with the comparisons of their solutions to the benchmark solutions or experimental data. The five categories for the benchmark problems were as follows: Category 1:Basic Methods. The numerical computation of sound is affected by, among other issues, the choice of grid used and by the boundary conditions. Category 2:Complex Geometry. The ability to compute the sound in the presence of complex geometric surfaces is important in practical applications of CAA. Category 3:Sound Generation by Interacting With a Gust. The practical application of CAA for computing noise generated by turbomachinery involves the modeling of the noise source mechanism as a vortical gust interacting with an airfoil. Category 4:Sound Transmission and Radiation. Category 5:Sound Generation in Viscous Problems. Sound is generated under certain conditions by a viscous flow as the flow passes an object or a cavity.

Dahl, Milo D.↗

CLEAR: Boosted Lyα Transmission of the Intergalactic Medium in UV-bright Galaxies

Reionization is an inhomogeneous process, thought to begin in small ionized bubbles of the intergalactic medium (IGM) around overdense regions of galaxies. Recent Lyα studies during the epoch of reionization show evidence that ionized bubbles formed earlier around brighter galaxies, suggesting higher IGM transmission of Lyα from these galaxies. We investigate this problem using IR slitless spectroscopy from the Hubble Space Telescope (HST) Wide-Field Camera 3 (WFC3) G102 grism observations of 148 galaxies selected via photometric redshifts at 6.0 < z < 8.2. These galaxies have spectra extracted from the CANDELS Lyα Emission at Reionization (CLEAR) survey. We combine the CLEAR data for 275 galaxies with the Keck Deep Imaging Multi-Object Spectrograph and MOSFIRE data set from the Texas Spectroscopic Search for Lyα Emission at the End of Reionization Survey. We constrain the Lyα equivalent width (EW) distribution at 6.0 < z < 8.2, which is described by an exponential form, dN / dEW ∝ exp(-EW) W(sub 0), with the characteristic e-folding scale width (W(sub 0)). We confirm a significant drop in the Lyα strength (i.e., W(sub 0)) at z > 6. Furthermore, we compare the redshift evolution of W(sub 0) between galaxies at different UV luminosities. UV-bright (M(sub UV) < −21 [i.e., L(sub UV) > L*]) galaxies show weaker evolution with a decrease of 0.4 ( ± 0.2) dex in W(sub 0) at z > 6, while UV-faint (M(sub UV) > −21 [LUV < L*]) galaxies exhibit a significant drop of 0.7–0.8 (±0.2) dex in W(sub 0) from z < 6 to z > 6. If the change in W(sub 0) is proportional to the change in the IGM transmission for Lyα photons, then this is evidence that the transmission is “boosted” around UV-brighter galaxies, suggesting that reionization proceeds faster in regions around such galaxies.

Reionization↗

Angles of multivariable root loci

A generalized eigenvalue problem is demonstrated to be useful for computing the multivariable root locus, particularly when obtaining the arrival angles to finite transmission zeros. The multivariable root loci are found for a linear, time-invariant output feedback problem. The problem is then employed to compute a closed-loop eigenstructure. The method of computing angles on the root locus is demonstrated, and the method is extended to a multivariable optimal root locus.

Thompson, P. M.↗

Current structural vibration problems associated with noise

As the performance of aerospace vehicles has increased, the noise generated by the propulsion system and by the passage of the vehicle through the air has also increased. Further increases in performance are now underway for space vehicles such as the space shuttle vehicle and for short distance takeoff and landing (STOL) aircraft, and are being planned for supersonic aircraft. The flight profiles and design features of these high-performance vehicles are reviewed and an estimate made of selected noise-induced structural vibration problems. Considerations for the prevention of acoustic fatigue, noise transmission, and electronic instrument malfunction are discussed.

Mixson, J. S.↗

Automotive technology status and projections. Volume 2: Assessment report

Current and advanced conventional engines, advanced alternative engines, advanced power train components, and other energy conserving automobile modifications which could be implemented by the end of this century are examined. Topics covered include gas turbine engines, Stirling engines, advanced automatic transmissions, alternative fuels, and metal and ceramic technology. Critical problems are examined and areas for future research are indicated.

Dowdy, M.↗

Multivariable frequency weighted model order reduction for control synthesis

Quantitative criteria are presented for model simplification, or order reduction, such that the reduced order model may be used to synthesize and evaluate a control law, and the stability robustness obtained using the reduced order model will be preserved when controlling the full-order system. The error introduced due to model simplification is treated as modeling uncertainty, and some of the results from multivariate robustness theory are brought to bear on the model simplification problem. A numerical procedure developed previously is shown to lead to results that meet the necessary criteria. The procedure is applied to reduce the model of a flexible aircraft. Also, the importance of the control law itself, in meeting the modeling criteria, is underscored. An example is included that demonstrates that an apparently robust control law actually amplifies modest modeling errors in the critical frequency region, and leads to undesirable results. The cause of this problem is associated with the canceling of lightly damped transmission zeroes in the plant. An attempt is made to expand on some of the earlier results and to further clarify the theoretical basis behind the proposed methodology.

Schmidt, David K.↗