Search NASA⌕ Search

SEARCH · Search NASA

Results for “UHF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Technology for Television

A project being conducted by Varian Associates, Inc. and Lewis Research Center would allow a Ultrahigh Frequency (UHF) TV station to save 50% of its electricity cost. Because UHF stations need substantially more transmitter power, an amplifying device was needed. In the early 1970's Dr. Henry Kosmahl of Lewis had developed a radiowave amplifier to improve satellite transmission. He later worked with modifying klystron transmitters, electronic vacuum tubes used to generate and amplify UHF frequencies. If Dr. Kosmahl's multistage depressed collector or MDC can be incorporated into the klystron, the magnetic field shapes of electron beams can be changed to aid the energy recovery function of the MDC.

Source record↗

Communications Blackout Predictions for Atmospheric Entry of Mars Science Laboratory

The Mars Science Laboratory (MSL) is expected to be a long-range, long-duration science laboratory rover on the Martian surface. MSL will provide a significant milestone that paves the way for future landed missions to Mars. NASA is studying options to launch MSL as early as 2009. There are three elements to the spacecraft; carrier (cruise stage), entry vehicle, and rover. The rover will have a UHF proximity link as the primary path for EDL communications and may have an X-band direct-to-Earth link as a back-up. Given the importance of collecting critical event telemetry data during atmospheric entry, it is important to understand the ability of a signal link to be maintained, especially during the period near peak convective heating. The received telemetry during entry (or played back later) will allow for the performance of the Entry-Descent-Landing technologies to be assessed. These technologies include guided entry for precision landing, a new sky-crane landing system and powered descent. MSL will undergo an entry profile that may result in a potential communications blackout caused by ionized particles for short periods near peak heating. The vehicle will use UHF and possibly X-band during the entry phase. The purpose of this rep0rt is to quantify or bound the likelihood of any such blackout at UHF frequencies (401 MHz) and X-band frequencies (8.4 GHz). Two entry trajectory scenarios were evaluated: a stressful entry trajectory to quantify an upper-bound for any possible blackout period, and a nominal trajectory to quantify likelihood of blackout for such cases.

communications↗

Entry, Descent, and Landing Communications for the 2011 Mars Science Laboratory

The Mars Science Laboratory (MSL), established as the most advanced rover to land on the surface of Mars to date, launched on November 26th, 2011 and arrived to the Martian Gale Crater during the night of August 5th, 2012 (PDT). MSL will investigate whether the landing region was ever suitable to support carbon-based life, and examine rocks, soil, and the atmosphere with a sophisticated suite of tools. This paper addresses the flight system requirement by which the vehicle transmitted indications of the following events using both X-band tones and UHF telemetry to allow identification of probable root causes should a mission anomaly have occurred: Heat-Rejection System (HRS) venting, completion of the cruise stage separation, turn to entry attitude, atmospheric deceleration, bank angle reversal commanded, parachute deployment, heatshield separation, radar ground acquisition, powered descent initiation, rover separation from the descent stage, and rover release. During Entry, Descent, and Landing (EDL), the flight system transmitted a UHF telemetry stream adequate to determine the state of the spacecraft (including the presence of faults) at 8 kbps initiating from cruise stage separation through at least one minute after positive indication of rover release on the surface of Mars. The flight system also transmitted X-band semaphore tones from Entry to Landing plus one minute although since MSL was occulted, as predicted, by Mars as seen from the Earth, Direct-To-Earth (DTE) communications were interrupted at approximately is approx. 5 min after Entry ( approximately 130 prior to Landing). The primary data return paths were through the Deep Space Network (DSN) for DTE and the existing Mars network of orbiting assets for UHF, which included the Mars Reconnaissance Orbiter (MRO), Mars Odyssey (ODY), and Mars Express (MEX) elements. These orbiters recorded the telemetry data stream and returned it back to Earth via the DSN. The paper also discusses the total power received during EDL and the robustness of the telecom design strategy used to ensure EDL communications coverage.

relay operations↗

Enabling International Data Relay at Mars

The most commonly used mode of communications be-tween Earth and a Mars surface mission is ultra-high fre-quency (UHF) radio relay via a Mars orbiter. There are four orbiters and two surface rovers operating at Mars and by October there should be five orbiters and three landers or rovers. There has been some collaboration between ESA’s Mars Express orbiter and NASA’s rovers, but 2016 is when Mars relay becomes fully international. In October, ESA will deliver the ExoMars Trace Gas Orbiter (TGO) and En-try, Descent, and Landing (EDL) Demonstrator Module (EDM) lander to Mars. The ExoMars program includes both ESA and ROSCOSMOS, with NASA participation (the Electra UHF transceiver on TGO). NASA orbiters will pro-vide relay for EDM and future ESA Mars landers and rov-ers. TGO will provide relay for NASA's current and future surface assets (as Mars Express will continue to do). Inter-national collaboration is enabled in several steps. At the in-struction of the space agencies, the Mars mission projects negotiate and write a “Service Agreement.” This describes at a high level how a new Mars orbiter would operate with its corresponding surface missions or how a new surface mis-sion would operate with its corresponding orbiters. It in-cludes the roles of the different projects, how the new mis-sion would communicate with existing or planned missions, the general flow of data and commands, and the capabilities or requirements of the new mission. After completing the Service Agreement, the projects write Interface Control Doc-uments (ICDs), each of which describes data and command flow in greater detail and quantitative aspects of the relay link and operations timeline between an orbiter and a cor-responding lander/rover. Interfaces and operations are test-ed before a new mission arrives at Mars. Once at Mars, a new orbiter performs some “practice” relay contacts with its partners. For a new lander (e.g. EDM), relay operations gen-erally begin before atmospheric entry at Mars, with record-ing of the UHF relay signal from the lander (including open-loop wide-bandwidth recording) as it enters and traverses Mars’s atmosphere and lands on its surface. After Mars EDL or orbit injection, each relay contact is negotiat-ed and scheduled using the Mars Relay Operations Service (MaROS). This paper describes the international approach to develop inter-agency agreements, inter-project interfaces, and specifics of how MaROS is used in actual relay opera-tions between international partners.

Winton, Alistair J.↗

Exploring spin symmetry-breaking effects for static field ionization of atoms: Is there an analog to the Coulson–Fischer point in bond dissociation?

Löwdin's symmetry dilemma is an ubiquitous issue in approximate quantum chemistry. In the context of Hartree-Fock (HF) theory, the use of Slater determinants with some imposed constraints to preserve symmetries of the exact problem may lead to physically unreasonable potential energy surfaces. On the other hand, lifting these constraints leads to the so-called broken symmetry solutions that usually provide better energetics, at the cost of losing information about good quantum numbers that describe the state of the system. This behavior has previously been extensively studied in the context of bond dissociation. Here, this paper studies the behavior of different classes of HF spin polarized solutions (restricted, unrestricted, and generalized) in the context of ionization by strong static electric fields. We find that, for simple two electron systems, unrestricted Hartree-Fock (UHF) is able to provide a qualitatively good description of states involved during the ionization process (neutral, singly ionized, and doubly ionized states), whereas RHF fails to describe the singly ionized state. For more complex systems, even though UHF is able to capture some of the expected characteristics of the ionized states, it is constrained to a single M s (diabatic) manifold in the energy surface as a function of field intensity. In this case, a better qualitative picture can be painted by using generalized Hartree-Fock as it is able to explore different spin manifolds and follow the lowest solution due to lack of collinearity constraints on the spin quantization axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Apollo network

Although the design of the Apollo network followed closely behind the Manned Space Flight Network (MSFN) modification for the Gemini program, many site modifications were necessary to provide Apollo support due to the greater scope of the Apollo program. The Apollo program requires instrumentation for support of the S-I, S-11, S IV-B/IU, Command Service Module (CSM) and Lunar Excursion Module (LEM) stages. Command Service Module (CSM) and Lunar Excursion Module (LEM) stages. Support must also be provided at both orbital and lunar distances. Increased data processing capability is required for processing and displaying significantly larger amounts of information. The ground network requires the capability of processing both Pulse Code Modulation (PCM) telemetry and command data for the CSM, LEM, and S IV-B/IU. In various stages of the Apollo program, both tone (on UHF) and digital [on Unified S-Band (USB) and UHF] command capabilities are required. Also at various stages both USB and VHF telemetry links are required.

Ground support system↗

Bistatic radar sea state monitoring

Bistatic radar techniques were examined for remote measurement of the two-dimensional surface wave height spectrum of the ocean. One technique operates at high frequencies (HF), 3-30 MHz, and the other at ultrahigh frequencies (UHF), approximately 1 GHz. Only a preliminary theoretical examination of the UHF technique was performed; however the principle underlying the HF technique was demonstrated experimentally with results indicating that an HF bistatic system using a surface transmitter and an orbital receiver would be capable of measuring the two-dimensional wave height spectrum in the vicinity of the transmitter. An HF bistatic system could also be used with an airborne receiver for ground truth ocean wave spectrum measurements. Preliminary system requirements and hardware configurations are discussed for both an orbital system and an aircraft verification experiment.

Ruck, G. T.↗

Alteration of the ionosphere by man-made waves

In recent years powerful radio wave transmissions beamed at the ionosphere at frequencies somewhat below the penetration frequency of the F2 layer produced the following, mostly unexpected, spectacular effects: (1) artificial spread F seen on ionograms and implying the presence of large scale field-aligned irregularities in the ionospheric plasma density; (2) very strong additional absorption of probing waves reflected by the F2 layer; (3) field-aligned 'on frequency' scattering of UHF waves; (4) scattering of UHF waves by Langmuir waves which are believed to be parametrically excited; (5) the 630 nm airglow is artificially enhanced by a modifying wave of ordinary polarization but it is reduced in intensity by a modifying wave of extraordinary polarization; (6) the shape of the F2 layer is modified. The results of the observations are described and their tentative interpretation in terms of different parametric instabilities is outlined.

Fejer, J. A.↗

Plasma density mapping in the solar wind through use of VHF radio to measure electron content

How the electron content between the Solar probe and the earth can be observed with a minimum of equipment and give a quantitative rationale for the use of a signal near 400 MHz to supplement the telecommunications signal is described. The emphasis is on the method of making content observations and on their value. While far from the Sun, the electron content is so low that the S-X dual-frequency system is insufficiently sensitive and a UHF system is optimum. As the probe approaches the Sun, the UHF may be disrupted by scintillation and the variations of the telecommunications signal must be used for the content measurement. By operating the suggested system in different modes as the solar distance changes, operation during the entire mission is possible.

Croft, T. A.↗

Plume RF interference calculations for space shuttle

During a static ground test of a full-scale SRM, measurements of attenuation of the UHF 416.5 MHz Range Safety Signal, the VHF voice link (230 MHz), and of S-band (c. 2.2. GHz) communications links were undertaken. Analyses of these results indicate that measurable attenuation did occur at all test frequencies. The measured attenuation levels are compared with a simple model in which the received signal is identified as that diffracted about the edge of the highly absorbing plume and the signal level in the shadow zone is evaluated using the formula for diffraction at a straight edge. The comparison is satisfactory at VHF and UHF frequencies, and slightly less so at S-band. Reasons for the discrepancies found at higher frequencies are discussed. A revised procedure which appears to relieve the accuracy problem was developed. This procedure is discussed along with applications to high altitude SRM plume attenuation.

Boynton, F. P.↗

Land Mobile Satellite Systems (LMSS): Single aperture system design

The large size of the UHF antenna on the satellite provides two advantages with respect to the Land Mobile Satellite System design. It provides tremendous gain for both transmitting and receiving at the satellite and enables very simple, low power equipment in the mobile vehicle. The UHF antenna for this study was selected to have an aperture of 55 meters. This implies a beamwidth of roughly 0.45 degree and requires 87 beams to cover the continental United States.

Weber, W. J., III↗

Phase perturbation measurements through a heated ionosphere

High frequency radiowaves incident on an overdense (i.e., HF-frequency penetration frequency) ionosphere produce electron density irregularities. The effect of such ionospheric irregularities on the phase of UHF-radiowaves was determined. For that purpose the phase of radiowaves originating from celestial radio sources was observed with two antennas. The radiosources were chosen such that the line of sight to at least one of the antennas (usually both) passed through the modified volume of the ionosphere. Observations at 430 MHz and at 2380 MHz indicate that natural irregularities have a much stronger effect on the UHF phase fluctuations than the HF-induced irregularities for presently achieved HF-power densities of 20-80 uW/sq m. It is not clear whether some of the effects observed are the result of HF-modification of the ionosphere. Upper limits on the phase perturbations produced by HF-modification are 10 deg at 2380 MHz and 80 deg at 430 MHz.

Frey, A.↗

Satellite system design

The design of the MSAT spacecraft for the LMSS is presented. The most important requirement affecting the design of MSAT is that of producing a prescribed number of multiple beams. A conceptual design for MSAT describing most major subsystem individually is developed. The design of the large UHF multiple beam antenna and its associated feed array which are the most singularly prominent features of MSAT is emphasized. The overall design is outlined, and each subsystem is discussed. The design of the feed array and the RF, control, power, propulsion, and thermal subsystem are included. The RF performace of the UHF antenna, including its beam isolation performance, is discussed. The volume and mass properties of MSAT and its Shuttle launch considerations are also included.

Source record↗

The technology

The technology development needed to support the satellite system conceptual design is amplified. Activities connected to RF, control, and structure of the MSAT UHF antenna are addressed. The antenna RF activities are considered, and two studies related to the reflector surface tolerance and the microstrip feed technology are described. The software and hardware needed to implement the attitude control conceptual design are reviewed. Antenna structure development for the reflector and the deployable supporting mast is discussed. UHF feed located electronics are addressed.

Source record↗

RF characteristics of the hoop column antenna for the land mobile satellite system mission

A communication system using a satellite with a 118 meter diameter quad aperture antenna to provide telephone service to mobile users remotely located from the large metropolitan areas where the telephone companies are presently implementing their cellular system is described. In this system, which is compatible with the cellular system, the mobile user communicates with the satellite at UHF frequencies. The satellite connects him at S-Band, to the existing telephone network via a base station. The results of the RF definition work for the quad aperture antenna are presented. The elements of the study requirements for the LMSS are summarized, followed by a beam topology plan which satisfies the mission requirements with a practical and realiable configuration. The geometry of the UHF antenna and its radiation characteristics are defined. The various feed alternatives, and the S-band aperture are described.

Foldes, P.↗

Emission, absorption and group delay of microwaves in the atmosphere in relation to water vapour content over the Indian subcontinent

The advent of satellite communication for global coverage has apparently indicated a renewed interest in the studies of radio wave propagation through the atmosphere, in the VHF, UHF and microwave bands. The extensive measurements of atmosphere constituents, dynamics and radio meterological parameters during the Middle Atmosphere Program (MAP) have opened up further the possibilities of studying tropospheric radio wave propagation parameters, relevant to Earth/space link design. The three basic parameters of significance to radio propagation are thermal emission, absorption and group delay of the atmosphere, all of which are controlled largely by the water vapor content in the atmosphere, particular at microwave bands. As good emitters are also good absorbers, the atmospheric emission as well as the absorption attains a maximum at the frequency of 22.235 GHz, which is the peak of the water vapor line. The group delay is practically independent of frequency in the VHF, UHF and microwave bands. However, all three parameters exhibit a similar seasonal dependence originating presumably from the seasonal dependence of the water vapor content. Some of the interesting results obtained from analyses of radiosonde data over the Indian subcontinent collected by the India Meteorological Department is presented.

Sen, A. K.↗

Network design consideration of a satellite-based mobile communications system

Technical considerations for the Mobile Satellite Experiment (MSAT-X), the ground segment testbed for the low-cost spectral efficient satellite-based mobile communications technologies being developed for the 1990's, are discussed. The Network Management Center contains a flexible resource sharing algorithm, the Demand Assigned Multiple Access scheme, which partitions the satellite transponder bandwidth among voice, data, and request channels. Satellite use of multiple UHF beams permits frequency reuse. The backhaul communications and the Telemetry, Tracking and Control traffic are provided through a single full-coverage SHF beam. Mobile Terminals communicate with the satellite using UHF. All communications including SHF-SHF between Base Stations and/or Gateways, are routed through the satellite. Because MSAT-X is an experimental network, higher level network protocols (which are service-specific) will be developed only to test the operation of the lowest three levels, the physical, data link, and network layers.

Yan, T.-Y.↗

Comparison of reflectivity and wind profiles measured on 46.8 MHz and 430 MHz at the Arecibo Observatory

Comparisons of troposphere and stratosphere radar experiments at ultrahigh frequency (UHF) and very high frequency (VHF) were done at the Arecibo Observatory in April 1980 with the 430 MHz and 46.8 MHz radar. The velocity profiles measured on both frequencies with the Doppler beam swinging mode were compared. In general, the velocity profiles were equivalent. The VHF profile, however, shows more fluctuations with height than the UHF profile, although the latter was recorded with 150 m resolution instead of 300 m resolution on VHF.

Rottger, J.↗